Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface reactions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Thermodynamics of MgO Atomic Layer Deposition Surface Reactions

The realities of atomic layer deposition (ALD) surface reactions often deviate from the simple ligand exchange frequently used to illustrate the technique. A detailed understanding of these reactions is necessary to develop greater surface synthetic control including chemical selectivity for patterning or to target defects. Here, the thermodynamics of surface reactions relevant to MgO ALD were investigated using pyroelectric calorimetry to measure the time-resolved heat generation. These reactions show exothermic heat generation of 0.12 mJ/cm 2 and 0.15 mJ/cm 2 for alternating Mg(CpEt) 2 and H 2 O reactions, respectively. The total reaction heat closely matches the standard reaction enthalpy for bulk MgO, supplemented with first-principles molecular calculations. First-principles models further reveal that while simple ligand exchange is favorable during surface reactions, the required increase in Mg-coordination number from two in the precursor to six in bulk MgO requires additional coverage-dependent surface reactions, which depend on the availability and stability of proximal surface hydroxyls.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Resolving the Heat Generated from ZrO 2 Atomic Layer Deposition Surface Reactions

Abstract In situ pyroelectric calorimetry and spectroscopic ellipsometry were used to investigate surface reactions in atomic layer deposition (ALD) of zirconium oxide (ZrO 2 ). Calibrated and time‐resolved in situ ALD calorimetry provides new insights into the thermodynamics and kinetics of saturating surface reactions for tetrakis(dimethylamino)zirconium(IV) (TDMAZr) and water. The net ALD reaction heat ranged from 0.197 mJ cm −2 at 76 °C to 0.155 mJ cm −2 at 158 °C, corresponding to an average of 4.0 eV/Zr at all temperatures. A temperature dependence for reaction kinetics was not resolved over the range investigated. The temperature dependence of net reaction heat and distribution among metalorganic and oxygen source exposure is attributed to factors including growth rate, equilibrium surface hydroxylation, and the extent of the reaction. ZrO 2 ‐forming surface reactions were investigated computationally using DFT methods to better understand the influence of surface hydration on reaction thermodynamics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Resolving the Heat Generated from ZrO 2 Atomic Layer Deposition Surface Reactions

Abstract In situ pyroelectric calorimetry and spectroscopic ellipsometry were used to investigate surface reactions in atomic layer deposition (ALD) of zirconium oxide (ZrO 2 ). Calibrated and time‐resolved in situ ALD calorimetry provides new insights into the thermodynamics and kinetics of saturating surface reactions for tetrakis(dimethylamino)zirconium(IV) (TDMAZr) and water. The net ALD reaction heat ranged from 0.197 mJ cm −2 at 76 °C to 0.155 mJ cm −2 at 158 °C, corresponding to an average of 4.0 eV/Zr at all temperatures. A temperature dependence for reaction kinetics was not resolved over the range investigated. The temperature dependence of net reaction heat and distribution among metalorganic and oxygen source exposure is attributed to factors including growth rate, equilibrium surface hydroxylation, and the extent of the reaction. ZrO 2 ‐forming surface reactions were investigated computationally using DFT methods to better understand the influence of surface hydration on reaction thermodynamics.

Bielinski, Ashley R.↗
DOE OSTI2024

Practical Considerations for Understanding Surface Reaction Mechanisms Involved in Heterogeneous Catalysis

Acquiring useful knowledge about the active site(s) of a catalyst, nature of reactant–catalyst interactions, nature of reactive intermediates, rate-determining step, reaction rate orders that affect various process parameters, and reaction mechanism as a whole is exceedingly challenging. This is especially true in the case of heterogeneous catalysts due to the complexity of the nature of surface active sites and their nonstatic behavior. Here, we present our perspective on differentiating between various surface reaction mechanisms in light of pioneering studies by leaders in the field, with the aim of clarifying some of the confusion associated with these complex mechanisms, especially the Eley–Rideal mechanism. Using bibliometric analysis, we identify and discuss the following four reactions that most commonly invoke the Eley– Rideal mechanism: H 2 activation, CO oxidation, esterification of alcohols by acids, and selective catalytic reduction (SCR) of NO x with NH 3 . Our analysis of studies utilizing well-suited experimental and computational methodologies for differentiating surface reaction mechanisms suggests that the above-mentioned four reactions do not occur via the Eley–Rideal mechanism. Instead, each reaction occurs via the Langmuir–Hinshelwood mechanism with nonidealities present. Lastly, we highlight practical considerations regarding select experimental (characterization methods and differential kinetics) and computational modeling that we believe can provide useful insights to accurately discern between the various possible reaction mechanisms in heterogeneous catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Concurrent measurement of strain and chemical reaction rates in a calcite grain pack undergoing pressure solution: Evidence for surface-reaction controlled dissolution

Pressure solution is inferred to be a significant contributor to sediment compaction and lithification, especially in carbonate sediments. For a sediment deforming primarily by pressure solution, the compaction rate should be directly related to the rate of calcite dissolution, transport along grain contacts, and calcite reprecipitation. Previous experimental work has shown that there is evidence that deformation in wet calcite grain packs is consistent with control by pressure solution, but considerable ambiguity remains regarding the rate limiting mechanism. We present the results of laboratory compaction experiments designed to directly measure calcite dissolution and precipitation rates (recrystallization rates) concurrently with strain rate to test whether measured rates are consistent with predicted rates both in absolute magnitude and time evolution. Recrystallization rates are measured using trace element chemistry (Sr/Ca, Mg/Ca) and isotopes (87Sr/86Sr) of fluids flowing slowly through a compacting grain pack as it is being triaxially compressed. Imaging techniques are used to characterize the grain contacts and strain effects in the post-experiment grain pack. Our data show that calcite recrystallization rates calculated from all three geochemical parameters are in approximate agreement and that the rates closely track strain rate. The geochemically inferred rates are close to predicted rates in absolute magnitude. Uncertainty in grain contact dimensions makes distinguishing between surface reaction control and diffusion control difficult. Measured reaction rates decrease faster than predicted from standard pressure solution creep flow laws. This inconsistency may indicate that calcite dissolution rates at grain contacts are more complex, and more time-dependent, than suggested by geometric models designed to predict grain contact stresses.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Tandem bulk oxygen diffusion and surface reactions in reducible metal oxides control redox cycle dynamics

The interplay between bulk oxygen diffusion and surface reactions in reducible metal oxides is key in heterogeneous catalysts, but direct measurements of oxygen mobility, transient kinetics, and in situ spectroscopies have been lacking. Here, we reveal complex dynamic behavior of ceria-zirconia by H 2 using transient kinetics via mass spectrometry and in situ Raman and near-ambient pressure x-ray photoelectron spectroscopies. Molecular dynamics simulations with a machine learning potential delineate competitive oxygen diffusion mechanisms, with an optimal mobility at intermediate reductions. We expose a compensation between vacancy availability and lattice distortion at intermediate to high reductions and Frenkel defects at low reductions, underscoring a potential deficiency of 16 O/ 18 O exchange experiments in deducing oxygen mobility. Vacancies in proximity require electron localization on Ce atoms further away. The continuous replenishment of surface oxygen results in a varying reduction rate, with H 2 dissociation being the rate-limiting step. Multiscale transient simulations, consistent with experiments, indicate catalysts of potentially spatially varying oxidation states. The approach is broadly applicable to reducible oxide materials.

36 MATERIALS SCIENCE↗
DOE OSTI2025

On-Surface Reactions of Electronically Active Self-Assembled Monolayers for Electrode Work Function Tuning

Self-assembled monolayers (SAMs) help improve the performance of organic electronic devices through interface passivation and enhanced carrier transport. Yet, there is limited information regarding the chemical structure of the SAMs upon functionalization and subsequent thermal treatment. Here, we studied the on-surface reaction of carbazole-derived SAMs on model gold electrodes, focusing on the chemical structure changes induced by thermal treatments. Furthermore, we correlate the microscopic changes with their impact on the electrode’s work function. The carbazole-based SAMs first transform into organometallic complexes. At higher annealing temperatures, SAMs convert to oligomeric complexes. The observed chemical reactions significantly reduce the electrode work function and facilitate electron injection in n-type organic thin-film transistors. Our results highlight the on-surface synthesis of electronically active SAMs as an alternative approach for modifying the work function of electrodes for organic electronics.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2024

NO formation by N 2 /O 2 plasma catalysis: The impact of surface reactions, gas-phase reactions, and mass transport

Pathways and timescales relevant to facilitate plasma-assisted N 2 -O 2 reactions are assessed by measuring the consumption of plasma-derived N and the formation of NO in the gas phase and over Ag catalytic surfaces. These measurements are enabled by a setup that enables N 2 activation in an atmospheric pressure RF plasma jet, enables O 2 addition in the plasma afterglow, facilitates reactions over an Ag wire catalyst, and allows species density quantification by molecular beam mass spectrometry. Gas-phase reactions consume N but do not form NO with high selectivity. The presence of the non-porous Ag wire catalyst increases the rate of N conversion to NO, though mass transfer processes, not surface reactions, dictate the rate of N consumption. When O 2 concentrations and the ratio of the surface area of the catalyst to the void volume of the reactor are high (3–5 mol% O 2 , 10900 m –1 ), N conversion to NO reaches 100 % selectivity. When both N 2 and O 2 are fed through the plasma jet, gas-phase NO production increases 10×, although plasma and gas-phase processes do not exclusively produce NO. Above a threshold NO density, N cannot diffuse to the catalyst surface faster than it is consumed in the gas phase by reactions with NO. Furthermore, the use of heterogeneous catalysts to enhance plasma-driven N x O y formation and control N x O y product selectivity is limited to cases where diffusive transport of N from the gas phase to the catalyst surface is faster than consumption of N from gas-phase reactions with NO.

Engineering↗
DOE OSTI2025

Probing the Effects of Dimethyl Aluminum Isopropoxide Surface Reaction Byproducts on Atomic Layer Deposition Nucleation

Atomic layer deposition (ALD) processes that leverage a myriad of metal–organic and complementary reactant combinations have been identified to realize precise and conformal thin film growth. However, the effects of the ALD reaction byproducts on nucleation and growth mechanisms are rarely considered. Site-selective ALD processes provide an opportunity for the detailed investigation of uniform surface sites with atomistic accuracy. Intentional pretreatment with a known ALD reaction byproduct – isopropanol – enables a significant improvement in the nucleation rate reproducibility of dimethylaluminum isopropoxide and water ALD on rutile TiO 2 (110). In situ spectroscopic ellipsometry reveals a partially reversible byproduct binding that is site-selective for TiO 2 (110) surface oxygen vacancies. First-principles calculations reveal surface site-specific thermodynamics for adsorption of isopropanol and water that may influence ALD nucleation. In conclusion, the sensitivity of site-selective ALD motivates consideration of secondary surface reactions when designing precision deposition processes, including area- or site-selective ALD reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Surface reaction for efficient and stable inverted perovskite solar cells

We report perovskite solar cells (PSCs) with an inverted structure (often referred to as the p-i-n architecture) are attractive for future commercialization due to their easily scalable fabrication, reliable operation, and compatibility with a wide range of perovskite-based tandem device architectures. However, the power conversion efficiency (PCE) of p-i-n PSCs falls behind n-i-p (or normal) structure counterparts. This large performance gap could undermine efforts to adopt p-i-n architectures, despite their other advantages. Given the remarkable advances in perovskite bulk materials optimization over the past decade, interface engineering has become the most important strategy to push PSC performance to its limit. Here, we report a reactive surface engineering approach based on a simple post-growth treatment of 3-(Aminomethyl)pyridine (3-APy) on top of a perovskite thin film. First, the 3-APy molecule selectively reacts with surface FA+, reducing perovskite surface roughness and surface potential fluctuations associated with surface steps/terraces. Second, the reaction product on the perovskite surface decreases the formation energy of charged iodine-vacancies, leading to effective n-type doping with a reduced work function in the surface region. With this reactive surface engineering, the resulting p-i-n PSCs obtained a PCE over 25%, along with retaining 87% of the initial PCE after over 2400 h of one-sun operation at about 55 degrees C in air.

14 SOLAR ENERGY↗
DOE OSTI2023

Transition-state correlations for predicting thermochemistry of adsorbates and surface reactions

Estimating thermochemical properties from linear correlations may provide a pathway to circumvent expensive density functional theory (DFT) calculations for quantities such as pre-exponentials and temperature corrections to DFT energies. Here, in this work, we construct thermochemical scaling relations between C 1 –C 6 n-alkanes in the gas phase and adsorbed alkyl chains extending from several transition metal surfaces, and examine changes in the slope and fit between metals and adsorption sites. We subsequently add –OH, –NH 2 , C$=$O, and C$=$C functional groups to the C 1 –C 6 molecules and demonstrate strong linear correlations for thermochemistry across all species. We broaden the correlations to incorporate transition states of C 1 –C 6 n-alkane dehydrogenation reactions, where thermochemistry for computationally prohibitive transition-state calculations can be quickly assessed. Additionally, we rationalize the linearity of thermochemical correlations based on the composition of the homologous series and theoretical assessments. As an application of the correlations, we estimate pre-exponentials for elementary surface reactions of ethane and propane hydrogenolysis on Ru(0001), which is of relevance to plastic hydrogenolysis. Depending on kinetically important steps, entropic contributions may be necessary to include in certain reaction mechanisms; in contrasting examples, entropies are found to be relatively insignificant for ethane hydrogenolysis but pertinent for propane hydrogenolysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Resolving the Coverage Dependence of Surface Reaction Kinetics with Machine Learning and Automated Quantum Chemistry Workflows

Microkinetic models for catalytic systems require estimation of many thermodynamic and kinetic parameters that can be calculated for isolated species and transition states using ab initio methods. However, the presence of nearby coadsorbates on the surface can dramatically alter these thermodynamic and kinetic parameters causing them to be dependent on species coverage fractions. As there are combinatorially many coadsorbed configurations on the surface, computing the coverage dependence of these parameters is far less straightforward. We present a framework for generating and applying machine learning models to predict coverage-dependent parameters for microkinetic models. Our toolkit enables automatic calculation and evaluation of coadsorbed configurations allowing us to sample 2,000 coadsorbed adsorbates and transition states (TSs) for a diverse set of 9 reactions on Cu(111), a challenging surface, with four possible coadsorbates. This dataset was then used to train subgraph isomorphic decision trees (SIDTs) to predict the stability and association energy of configurations. We were able to achieve mean absolute errors (MAEs) of 0.106 eV on adsorbates, 0.172 eV on TSs, and due to natural error cancellation in SIDTs for relative properties, 0.130 eV on reaction energies and 0.180 eV on activation barriers. In conclusion, we describe how to use these models to predict coverage-dependent corrections for adsorbates and TSs and demonstrate on H*, HO*, and O* comparing the generated SIDT model with an iteratively refined version.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Strategies to Obtain Reliable Energy Landscapes from Embedded Multireference Correlated Wavefunction Methods for Surface Reactions

Embedded correlated wavefunction (ECW) theory is a powerful tool for studying ground- and excited-state reaction mechanisms and associated energetics in heterogeneous catalysis. Several factors are important to obtaining reliable ECW energies, critically the construction of consistent active spaces (ASs) along reaction pathways when using a multireference correlated wavefunction (CW) method that relies on a subset of orbital spaces in the configuration interaction expansion to account for static electron correlation, e.g., complete AS self-consistent field theory, in addition to the adequate partitioning of the system into a cluster and environment, as well as the choice of a suitable basis set and number of states included in excited-state simulations. Here, in this work, we conducted a series of systematic studies to develop best-practice guidelines for ground- and excited-state ECW theory simulations, utilizing the decomposition of NH 3 on Pd(111) as an example. We determine that ECW theory results are relatively insensitive to cluster size, the aug-cc-pVDZ basis set provides an adequate compromise between computational complexity and accuracy, and that a fixed-clean-surface approximation holds well for the derivation of the embedding potential. Additionally, we demonstrate that a merging approach, which involves generating ASs from the molecular fragments at each configuration, is preferable to a creeping approach, which utilizes ASs from adjacent structures as an initial guess, for the generation of consistent potential energy curves involving open-d-shell metal surfaces, and, finally, we show that it is essential to include bands of excited states in their entirety when simulating excited-state reaction pathways.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Control of Surface Chemical Reactions through Solid Stiffness

Control of surface reactions is commonly achieved by modification of surface electronic structures. Here, we discover an alternative pathway for controlling surface reactions by tuning the mechanical stiffness of the underlying material. We find that in addition to the typically assumed surface electronic contribution right at the reactive site, the contribution from the deformation of the bulk region plays a vital role in controlling surface reactions. The underlying mechanism is an elastic relaxation of the solid, which depends on the material’s stiffness and can be modified by tuning bulk stoichiometry. The effect of bulk stiffness on surface reactions has been demonstrated by considering hydrogen scission reaction and oxygen incorporation reaction during corrosion of amorphous SiC in water and air, respectively. Finally, our results imply that tuning of bulk stiffness by modifying stoichiometry can provide an effective method for controlling surface reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗