Optical synchronization-phase locking with shot noise processes Interim technical report
Optical communication synchronization with phase lock tracking loop and analysis of shot noise processes
Gagliardi, R.↗
SEARCH · Search NASA
Results for “synchronization and phase locking”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Diversity-lock phase demodulator
Synchronous diversity-lock phase demodulator for tracking and demodulating orthogonally polarized signals transmitted from satellites
SIGNAL TRANSMISSION↗
Phase locked loop synchronization for direct detection optical PPM communication systems
Receiver timing synchronization of an optical pulse position modulation (PPM) communication system can be achieved using a phase locked loop (PLL) if the photodetector output is properly processed. The synchronization performance is shown to improve with increasing signal power and decreasing loop bandwidth. Bit error rate (BER) of the PLL synchronized PPM system is analyzed and compared to that for the perfectly synchronized system. It is shown that the increase in signal power needed to compensate for the imperfect synchronization is small (less than 0.1 dB) for loop bandwidths less than 0.1% of the slot frequency.
Chen, C. C.↗
Phase error statistics of a phase-locked loop synchronized direct detection optical PPM communication system
Receiver timing synchronization of an optical Pulse-Position Modulation (PPM) communication system can be achieved using a phased-locked loop (PLL), provided the photodetector output is suitably processed. The magnitude of the PLL phase error is a good indicator of the timing error at the receiver decoder. The statistics of the phase error are investigated while varying several key system parameters such as PPM order, signal and background strengths, and PPL bandwidth. A practical optical communication system utilizing a laser diode transmitter and an avalanche photodiode in the receiver is described, and the sampled phase error data are presented. A linear regression analysis is applied to the data to obtain estimates of the relational constants involving the phase error variance and incident signal power.
Natarajan, Suresh↗
An investigation of phase-lock loop swept- frequency synchronization
Rapid synchronization of phase-locked oscillators is best achieved by the swept-frequency acquisition technique, wherein the voltage-controlled oscillator /VCO/ is linearly swept through the uncertainty band. The theoretically predicted sweep rates of this technique and the observed experimental results differ by less than seven percent.
Dye, R. A.↗
An all digital phase locked loop for synchronization of a sinusoidal signal embedded in white Gaussian noise
An all digital phase locked loop which tracks the phase of the incoming sinusoidal signal once per carrier cycle is proposed. The different elements and their functions and the phase lock operation are explained in detail. The nonlinear difference equations which govern the operation of the digital loop when the incoming signal is embedded in white Gaussian noise are derived, and a suitable model is specified. The performance of the digital loop is considered for the synchronization of a sinusoidal signal. For this, the noise term is suitably modelled which allows specification of the output probabilities for the two level quantizer in the loop at any given phase error. The loop filter considered increases the probability of proper phase correction. The phase error states in modulo two-pi forms a finite state Markov chain which enables the calculation of steady state probabilities, RMS phase error, transient response and mean time for cycle skipping.
Reddy, C. P.↗
Cross-spectrum symbol synchronization
A popular method of symbol synchronization exploits one aspect of generalized harmonic analysis, normally referred to as the cross-spectrum. Utilizing nonlinear techniques, the input symbol energy is effectively concentrated onto multiples of the symbol clock frequency, facilitating application of conventional phase lock synchronization techniques. A general treatment of the cross-spectrum technique is developed and shown to be applicable across a broad class of symbol modulation formats. An important specific symbol synchronization application is then treated, focusing the general development to provide both insight and quantitative measure of the performance impact associated with variation in these key synchronization parameters: symbol modulation format, symbol transition probability, symbol energy to noise density ratio, and symbol rate to filter bandwidth ratio.
Mccallister, R. D.↗
Collective Interaction of a Compressible Periodic Parallel Jet Flow
A linear instability model for multiple spatially periodic supersonic rectangular jets is solved using Floquet-Bloch theory. The disturbance environment is investigated using a two dimensional perturbation of a mean flow. For all cases large temporal growth rates are found. This work is motivated by an increase in mixing found in experimental measurements of spatially periodic supersonic rectangular jets with phase-locked screech. The results obtained in this paper suggests that phase-locked screech or edge tones may produce correlated spatially periodic jet flow downstream of the nozzles which creates a large span wise multi-nozzle region where a disturbance can propagate. The large temporal growth rates for eddies obtained by model calculation herein are related to the increased mixing since eddies are the primary mechanism that transfer energy from the mean flow to the large turbulent structures. Calculations of growth rates are presented for a range of Mach numbers and nozzle spacings corresponding to experimental test conditions where screech synchronized phase locking was observed. The model may be of significant scientific and engineering value in the quest to understand and construct supersonic mixer-ejector nozzles which provide increased mixing and reduced noise.
Miles, Jeffrey Hilton↗
A 12 GHz satellite video receiver: Low noise, low cost prototype model for TV reception from broadcast satellites
A 12-channel synchronous phase lock video receiver consisting of an outdoor downconverter unit and an indoor demodulator unit was developed to provide both low noise performance and low cost in production quantities of 1000 units. The prototype receiver can be mass produced at a cost under $1540 without sacrificing system performance. The receiver also has the capability of selecting any of the twelve assigned satellite broadcast channels in the frequency range 11.7 to 12.2 GHz.
Hreha, M. A.↗
Phase-lock loop swept-frequency synchronization analysis.
Nonlinear time-variant phase-lock loop differential equation for arbitrary loop voltage- controlled oscillator sweep voltages used in aerospace tracking and communication systems
SWEEP FREQUENCY↗
Telemetry synchronizer
A telemetry data synchronizer is reported for achieving phase lock and synchronization of an input signal having a pseudorandom sequence.
Pardoe, C. T.↗
Ensuring fault tolerance of phase-locked clocks
Processors within a real-time multiprocessor system must be synchronized with as little overhead as possible. Although synchronization can be achieved via both software (e.g., interactive convergence and interactive consistency algorithms) and hardware (e.g., multistage synchronizers and phase-locked clocks), phase-locked clocks are most attractive due to their small overheads. Despite the fact that synchronization of the multiprocessor system with phase-locked clocks is totally different in nature from the interactive consistency algorithm, it is presently proven that it must satisfy the same condition, N equal to or greater than 3m + 1, where N is the total number of clocks in the multiprocessor system and m is the maximum number of faults tolerable. Also presented are results showing how to design phase-locked clocks so as to be impervious up to a given arbitrary number of malicious failures.
Krishna, C. M.↗
Synchronous ten-megabit biphase detector
Synchronous phase-lock-loop detector accepts distorted input and generates jitter-free clock. Data-detection circuitry takes advantage of this clock and employs integrate-and-dump decision circuit to provide near-theoretically ideal data decoding.
Balliet, L.↗
Ultrasonic Dynamic Vector Stress Sensor
Stress inferred from measurements in specimens rather than in bonded gauges. Ultrasonic dynamic vector stress sensor (UDVSS) measures changes in dynamic directional stress occurring in material or structure at location touched by device when material or structure put under cyclic load. Includes phase-locked loop, synchronous amplifier, and contact probe. Useful among manufacturers of aerospace and automotive structures for stress testing and evaluation of designs.
Heyman, Joseph S.↗
Fiber Optic Sensing Monitors Strain and Reduces Costs
In applications where stress on a structure may vary widely and have an unknown impact on integrity, a common engineering strategy has been overbuilding to ensure a sufficiently robust design. While this may be appropriate in applications where weight concerns are not paramount, space applications demand a bare minimum of mass, given astronomical per-pound launch costs. For decades, the preferred solution was the tactic of disassembly and investigation between flights. Knowing there must be a better way, Dr. Mark Froggatt, of Langley Research Center, explored alternate means of monitoring stresses and damage to the space shuttle. While a tear-it-apart-and-have-a-look strategy was effective, it was also a costly and time consuming process that risked further stresses through the very act of disassembly and reassembly. An alternate way of monitoring the condition of parts under the enormous stresses of space flight was needed. Froggatt and his colleagues at Langley built an early-warning device to provide detailed information about even minuscule cracks and deformations by etching a group of tiny lines, or grating, on a fiber optic cable five-thousandths of an inch thick with ultraviolet light. By then gluing the fiber to the side of a part, such as a fuel tank, and shining a laser beam down its length, reflected light indicated which gratings were under stress. Inferring this data from measurements in light rather than in bonded gauges saved additional weight. Various shuttle components now employ the ultrasonic dynamic vector stress sensor (UDVSS), allowing stress detection by measuring light beamed from a built-in mini-laser. By measuring changes in dynamic directional stress occurring in a material or structure, and including phase-locked loop, synchronous amplifier, and contact probe, the UDVSS proved especially useful among manufacturers of aerospace and automotive structures for stress testing and design evaluation. Engineers could ensure safety in airplanes and spaceships with a narrower, not overbuilt, margin of safety. For this development, in 1997, Discover Magazine named Froggatt a winner in the "Eighth Annual Awards for Technological Innovation" from more than 4,000 entries.
Source record↗
On the acquisition time for an Apollo ranging code.
Apollo ranging code with phase locked loop for bit synchronization, plotting SNR vs error probability and acquisition time
APOLLO PROJECT↗
All-digital phase-lock loops for noise-free signals
Bit-synchronizers utilize all-digital phase-lock loops that are referenced to a high frequency digital clock. Phase-lock loop of first design acquires frequency within nominal range and tracks phase; second design is modified for random binary data by addition of simple transition detector; and third design acquires frequency over wide dynamic range.
Anderson, T. O.↗
Synthesis and evaluation of phase detectors for active bit synchronizers
Self-synchronizing digital data communication systems usually use active or phase-locked loop (PLL) bit synchronizers. The three main elements of PLL synchronizers are the phase detector, loop filter, and the voltage controlled oscillator. Of these three elements, phase detector synthesis is the main source of difficulty, particularly when the received signals are demodulated square-wave signals. A phase detector synthesis technique is reviewed that provides a physically realizable design for bit synchronizer phase detectors. The development is based upon nonlinear recursive estimation methods. The phase detector portion of the algorithm is isolated and analyzed.
Mcbride, A. L.↗