Search NASA⌕ Search

SEARCH · Search NASA

Results for “system simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Simulation system for testing a radar system

A simulation system for use in testing a radar system comprises a coarse delay module, a fine delay module, and a doppler shift module. The coarse delay module is configured to receive a first stream of digital data samples that are sampled from a radar signal at a sample time period or a second stream of digital data samples that are processed by another simulation system component and delay the digital data samples by a selectable first delay time that is greater than or equal to the sample time period. The fine delay module is configured to receive the digital data samples and filter the digital data samples to represent delay by a selectable second delay time that is less than the sample time period. The doppler shift module is configured to receive the digital data samples and adjust a value of a frequency content of the fine delayed samples.

Chritton, Audrey L.↗
DOE OSTI2022

A fast and accurate modeling approach for water and steam thermodynamics with practical applications in district heating system simulation

In U.S. district heating (DH) systems, steam is the most common heat transport medium. Industry demand for new advanced modeling capabilities of complete steam DH systems is increasing; however, the existing models for water/steam thermodynamics are too slow for large system simulations because of computationally expensive algebraic loops that require the solution to nonlinear systems of equations. For practical applications, this work presents a novel split-medium approach that implements numerically efficient liquid water models alongside various water/steam models, breaking costly algebraic loops by decoupling mass and energy balance equations. New component models for steam DH systems are also presented. We implemented the models in the equation based Modelica language and evaluated accuracy and computing speed across multiple scales: from fundamental thermodynamic properties to complete districts featuring 10 to 200 buildings. Compared to district models with the IF97 water/steam model and equipment models from the Modelica Standard Library, the new implementation improves the scaling rate for large districts from cubic to quadratic with negligible compromise to accuracy. Additionally, for an annual simulation with 180 buildings, this translates to a computing time reduction from 33 to 1-1.5 h. These results are critically important for industry practitioners to simulate steam DH systems at large scales.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2023

LongBondEliminator: A Molecular Simulation Tool to Remove Ring Penetrations in Biomolecular Simulation Systems

We develop a workflow, implemented as a plugin to the molecular visualization program VMD, that can fix ring penetrations with minimal user input. LongBondEliminator, detects ring piercing artifacts by the long, strained bonds that are the local minimum energy conformation during minimization for some assembled simulation system. The LongBondEliminator tool then automatically treats regions near these long bonds using multiple biases applied through NAMD. By combining biases implemented through the collective variables module, density-based forces, and alchemical techniques in NAMD, LongBondEliminator will iteratively alleviate long bonds found within molecular simulation systems. Through three concrete examples with increasing complexity, a lignin polymer, an viral capsid assembly, and a large, highly glycosylated protein aggrecan, we demonstrate the utility for this method in eliminating ring penetrations from classical MD simulation systems. The tool is available via gitlab as a VMD plugin, and has been developed to be generically useful across a variety of biomolecular simulations.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

GenASiS: General Astrophysical Simulation System. II. Self-gravitating Baryonic Matter*

GenASiS (General Astrophysical Simulation System) is a code being developed initially and primarily, though not exclusively, for the simulation of core-collapse supernovae on the world's leading capability supercomputers. This paper---the second in a series---documents capabilities for Newtonian self-gravitating fluid dynamics, including tabulated microphysical equations of state treating nuclei and nuclear matter (`baryonic matter'). Computation of the gravitational potential of a spheroid, and simulation of the gravitational collapse of dust and of an ideal fluid, provide tests of self-gravitation against known solutions. In multidimensional computations of the adiabatic collapse, bounce, and explosion of spherically symmetric pre-supernova progenitors---which we propose become a standard benchmark for code comparisons---we find that the explosions are prompt and remain spherically symmetric (as expected), with an average shock expansion speed and total kinetic energy that are inversely correlated with the progenitor mass at the onset of collapse and the compactness parameter.

Cardall, Christian [ORNL] (ORCID:000000020086105X)↗
DOE OSTI2025

A Participation Factor-Based Approach for Defining the EMT Model Boundary for Power System Simulations with Inverter-Based Resources

The increasing penetration of inverter-based resources (IBRs) introduces new challenges to power system simulations, particularly with the emergence of fast electromagnetic transient (EMT) dynamics and sub-synchronous oscillations (SSO) that require time-consuming EMT simulations. To reduce the time cost for simulating a large-scale power grid with IBRs, this paper proposes a novel participation factor-based approach for defining a critical zone for detailed EMT modeling and simulations, which includes the IBRs, synchronous generators, and the network components participating significantly in simulated contingencies. Both model-based and response-based methods are introduced for the estimation of participation factors (PFs). The case study on the 240-bus Western Electricity Coordinating Council (WECC) system demonstrates that the EMT zone determined by the proposed approach can effectively capture power system dynamics involving IBRs.

EMT simulation↗
DOE OSTI2023

Efficient and Scalable Time-Stepping Algorithms and Reduced-Order Modeling for Ocean System Simulations (Scientific/Technical Report)

This report provides a description of major accomplishments and results obtained by the University of South Carolina/Florida State University/Los Alamos National Laboratory team participating in the project "Efficient and Scalable Time-Stepping Algorithms and Reduced-Order Modeling for Ocean System Simulations" and the list of publications produced from the project.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Assessing residential activity in a home plumbing system simulator: monitoring the occurrence and relationship of major opportunistic pathogens and phagocytic amoebas

Opportunistic premise plumbing pathogens (OPPPs) have been detected in buildings’ plumbing systems causing waterborne disease outbreaks in the United States. In this study, we monitored the occurrence of OPPPs along with free-living amoeba (FLA) and investigated the effects of residential activities in a simulated home plumbing system (HPS). Water samples were collected from various locations in the HPS and analyzed for three major OPPPs: Legionella pneumophila, nontuberculous mycobacterial species (e.g., Mycobacterium avium, M. intracellulare, and M. abscessus), and Pseudomonas aeruginosa along with two groups of amoebas (Acanthamoeba and Vermamoeba vermiformis). A metagenomic approach was also used to further characterize the microbial communities. Results show that the microbial community is highly diverse with evidence of spatial and temporal structuring influenced by environmental conditions. L. pneumophila was the most prevalent pathogen (86% of samples), followed by M. intracellulare (66%) and P. aeruginosa (21%). Interestingly, M. avium and M. abscessus were not detected in any samples. The data revealed a relatively low prevalence of Acanthamoeba spp. (4%), while V. vermiformis was widely detected (81%) across all the sampling locations within the HPS. Locations with a high concentration of L. pneumophila and M. intracellulare coincided with the highest detection of V. vermiformis, suggesting the potential growth of both populations within FLA and additional protection in drinking water. After a period of stagnation lasting at least 2-weeks, the concentrations of OPPPs and amoeba immediately increased and then decreased gradually back to the baseline. Furthermore, monitoring the microbial population after drainage of the hot water tank and partial drainage of the entire HPS demonstrated no significant mitigation of the selected OPPPs. This study demonstrates that these organisms can adjust to their environment during such events and may survive in biofilms and/or grow within FLA, protecting them from stressors in the supplied water.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Evaluating Class 6 Delivery Truck Fuel Economy and Emissions Using Vehicle System Simulations for Conventional and Hybrid Powertrains and Co-Optima Fuel Blends

The US Department of Energy’s Co-Optimization of Engine and Fuels Initiative (Co-Optima) investigated how unique properties of bio-blendstocks considered within Co-Optima help address emissions challenges with mixing controlled compression ignition (i.e., conventional diesel combustion) and enable advanced compression ignition modes suitable for implementation in a diesel engine. Additionally, the potential synergies of these Co-Optima technologies in hybrid vehicle applications in the medium- and heavy-duty sector was also investigated. In this work, vehicles system were simulated using the Autonomie software tool for quantifying the benefits of Co-Optima engine technologies for medium-duty trucks. A Class 6 delivery truck with a 6.7 L diesel engine was used for simulations over representative real-world and certification drive cycles with four different powertrains to investigate fuel economy, criteria emissions, and performance. Comparisons were made between ultralow-sulfur diesel and a blend of 25% hexyl hexanoate with diesel. Model validation data were informed by 2019 model year Cummins ISB 6.7 L diesel engine maps and transient validation data in a pre-production hybrid configuration and a direct dyno coupled configuration with diesel fuel and a blend of 25% hexyl hexanoate with diesel.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2026

Mu2e resonant extraction regulation system simulation in delivery ring

Mu2e is an upcoming experiment at Fermilab that relies on the slowly extracted 8 GeV proton beam from the Delivery Ring. The experiment imposes strong requirements on the spill uniformity. To address these requirements, the fast spill regulations system is being developed and commissioned. To inform this development and optimize the system performance we are carrying out the detailed simulations of the regulation process. The simulation includes the effect of six harmonic sextupoles that excite the third-integer resonance and three fast ramping quadrupoles that drive the horizontal tune to 29/3. The components of spill regulation system are designed to mitigate long-term drifts in the beam, ensuring stable operation over extended timescales, as well as addresses rapid variations within single spill. In this study, we review the regulation system design, simulation of the slow regulation, and the fast regulation PID regulation to curtail random variations in the extraction rate that could occur within a single spill.

Narayanan, Aakaash [Fermilab]↗
DOE OSTI2022

Mesoscale Convective Systems Simulated by a High–Resolution Global Nonhydrostatic Model Over the United States and China

Mesoscale convective systems (MCSs) contribute a large fraction of warm-season precipitation and generate hazardous weather with substantial socio-economic impacts. Uncertainties in convection parameterizations in climate models limit our understanding of MCS characteristics and reliability of future projection. We examine the MCS simulation from the global 14-km Nonhydrostatic ICosahedral Atmospheric Model (NICAM) without cumulus parameterization against satellite observation from Global Precipitation Measurement (GPM) during 2001-2008. We focus on MCSs over the central U.S. and eastern China where MCSs prevail from March to August. A process-oriented tracking method incorporating both cloud and precipitation criteria is used to identify and track MCSs. About 140/100 MCSs initiate in the central U.S./eastern China per warm season and most of them initiate east of high mountains and in coastal regions. The frequency distribution of MCS lifetime is well captured in NICAM. But the simulated MCSs have stronger precipitation, smaller precipitation area, and larger cold cloud system than observed in both regions, which may be caused by weak entrainment as it is not well resolved at 14 km resolution. Here, the simulated MCS number is also underestimated in summer. By examining the climatological and MCS large-scale environments, the significant underestimation of MCS number in summer over the central U.S. may be attributed to the large climatological dry bias in the atmosphere. For China, mean moisture in summer is well simulated but deficiency in capturing the dynamic condition related to the coastal topography for triggering convection may have contributed to underestimation of MCS even in a sufficiently moist environment.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Low-order aquifer thermal energy storage model for geothermal system simulation

This paper presents a low-order aquifer thermal energy storage (ATES) model for simulation of combined subsurface and above-surface energy systems. The model is included in the Modelica IBPSA Library, which is a free open-source library with basic models for building and district energy and control systems. The model uses a lumped-component method, in which the transient conductive-convective heat and mass transfer equation is radially discretized. To verify the accuracy of the model, we present an inter-model comparison from a simulation test suite. Results show that the Modelica ATES model is in good agreement, with a normalized mean bias error for yearly variation of aquifer temperatures of 1.6×10−2 and 9×10−5 at 1 m and 10 m distance from the well.

Maccarini, Alessandro↗
DOE OSTI2024

Assessment of Electric Grid Transmission System Simulator for Human Factors Research

Over the past decades, various technologies have been developed for electric grid operations to support clean energy, meet rising electricity demands, and address infrastructure concerns. However, the human factors aspect is often overlooked during rapid integration. Questions persist about how these technologies impact human performance. Simulators play a critical role in supporting investigation of human factors design concepts and conducting comprehensive usability testing to evaluate human performance and assess human reliability. This paper aims to address human factors research simulator requirements and conduct a comparative study of six different simulators. A detailed evaluation reveals that the evaluated simulators lack the ability to customize user interfaces. Additionally, their user interface designs do not fulfill the basic human factors design principles, potentially leading to increased response variability and reduced statistical power when conducting controlled experimental research. In the future, it is essential to develop scripting tools to integrate customizable user interfaces and simulation models, ensuring meeting research requirements.

Li, Ruixuan↗