Search NASA⌕ Search

SEARCH · Search NASA

Results for “ternary nitrides”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Ternary Nitride Materials: Fundamentals and Emerging Device Applications

Interest in inorganic ternary nitride materials has grown rapidly over the past few decades, as their diverse chemistries and structures make them appealing for a variety of applications. Due to synthetic challenges posed by the stability of N 2 , the number of predicted nitride compounds dwarfs the number that have been synthesized, offering a breadth of opportunity for exploration. This review summarizes the fundamental properties and structural chemistry of ternary nitrides, leveraging metastability and the impact of nitrogen chemical potential. A discussion of prevalent defects, both detrimental and beneficial, is followed by a survey of synthesis techniques and their interplay with metastability. Throughout the review, we highlight applications (such as solid-state lighting, electrochemical energy storage, and electronic devices) in which ternary nitrides show particular promise.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Synthesis of Zn2NbN3 ternary nitride semiconductor with wurtzite-derived crystal structure

Binary III-N nitride semiconductors with wurtzite crystal structure such as GaN and AlN have been long used in many practical applications ranging from optoelectronics to telecommunication. The structurally related ZnGeN2 or ZnSnN2 derived from the parent binary compounds by cation mutation (elemental substitution) have recently attracted attention, but such ternary nitride materials are mostly limited to II-IV-N2 compositions. This paper demonstrates synthesis and characterization of zinc niobium nitride (Zn2NbN3) – a previously unreported II2-V-N3 ternary nitride semiconductor. The Zn2NbN3 thin films are synthesized using a one-step adsorption-controlled growth, and a two-step deposition/annealing method that suppresses the loss of Zn and N. Measurements indicate that this sputtered Zn2NbN3 crystalizes in cation-disordered wurtzite-derived structure, in contrast to chemically related rocksalt-derived Mg2NbN3 compound, also synthesized here for comparison using the two-step method. The estimated wurtzite lattice parameter ratio of Zn2NbN3 is 1.55, and the optical absorption onset is at 2.1 eV. Both of these values are lower compared to published Zn2NbN3 computational values of c/a = 1.62 and Eg = 3.5 - 3.6 eV. Additional theoretical calculations indicate that this difference is due to cation disorder in experimental samples, suggesting a way to tune the structural parameters and the resulting properties of heterovalent ternary nitride materials. Overall, this work expands the wurtzite family of nitride semiconductors to include Zn2NbN3, and suggests that related II2-V-N3 and other ternary nitrides should be possible to synthesize.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Mechanistically Guided Materials Chemistry: Synthesis of Ternary Nitrides, CaZrN 2 and CaHfN 2

Recent computational studies have predicted many new ternary nitrides, revealing synthetic opportunities in this underexplored phase space. However, synthesizing new ternary nitrides is difficult, in part because intermediate and product phases often have high cohesive energies that inhibit diffusion. Here, we report the synthesis of two new phases, calcium zirconium nitride (CaZrN 2 ) and calcium hafnium nitride (CaHfN 2 ), by solid state metathesis reactions between Ca 3 N2 and MCl 4 (M = Zr, Hf). Although the reaction nominally proceeds to the target phases in a 1:1 ratio of the precursors via Ca 3 N 2 + MCl4 → CaMN 2 + 2 CaCl 2 , reactions prepared this way result in Ca-poor materials (Ca x M 2–x N2, x < 1). A small excess of Ca 3 N 2 (ca. 20 mol %) is needed to yield stoichiometric CaMN 2 , as confirmed by high-resolution synchrotron powder X-ray diffraction. In situ synchrotron X-ray diffraction studies reveal that nominally stoichiometric reactions produce Zr 3+ intermediates early in the reaction pathway, and the excess Ca 3 N 2 is needed to reoxidize Zr 3+ intermediates back to the Zr 4+ oxidation state of CaZrN 2 . Analysis of computationally derived chemical potential diagrams rationalizes this synthetic approach and its contrast from the synthesis of MgZrN 2 . These findings additionally highlight the utility of in situ diffraction studies and computational thermochemistry to provide mechanistic guidance for synthesis.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Combinatorial investigation of the Mn–Ge–N chemical system containing ternary nitrides Mn 3 GeN and MnGeN 2

By changing nitrogen chemical potential during synthesis of Mn–Ge–N ternary nitrides, both wurtzite MnGeN 2 and antiperovskite Mn 3 GeN ternary phases are prepared. Antiperovskite films are optically opaque and conductive, while wurtzite films with Mn/(Mn + Ge) ≤ 0.5 transmit light above ~ 2 eV. Alloys of Mn 3 GeN with Si and Al are also investigated. Mn 3 (Ge 1−x Al x )N alloys with 0.07 ≤ x ≤ 0.16 exhibit a cubic (rather than tetragonal) structure. Mn 3 (Ge 1−x Si x )N with x ≤ 0.05 maintains the tetragonal structure but becomes cubic when x > 0.05. This study shows that care must be taken in the synthesis of Mn–Ge–N and similar nitrides, especially when materials are integrated into devices not amenable to structural and chemical probing.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Composition Dependent Electrochemical Properties of Earth-Abundant Ternary Nitride Anodes

Growing energy storage demands on lithium-ion batteries necessitate exploration of new electrochemical materials as next-generation battery electrode materials. In this work, we investigate the previously unexplored electrochemical properties of earth-abundant and tunable Zn 1-x Sn 1+x N 2 (x = -0.4 to x = 0.4) thin films, which show high electrical conductivity and high gravimetric capacity for Li insertion. Enhanced cycling performance is achieved compared to previously published end-members Zn 3 N 2 and Sn 3 N 4 , showing decreased irreversible loss and increased total capacity and cycle stability. The average reversible capacity observed is >1050 mAh/g for all compositions and 1220 mAh/g for Zn-poor (x = 0.2) films. Extremely Zn-rich films (x = -0.4) show improved adhesion; however, Zn-rich films undergo a phase transformation on the first cycle. Zn-poor and stoichiometric films do not exhibit significant phase transformations which often plague nitride materials and show no required overpotential at the 0.5 V plateau. Cation composition x is explored as a mechanism for tuning relevant mechanical and electrochemical properties, such as capacity, overpotential, phase transformation, electrical conductivity, and adhesion. The lithiation/delithiation experiments confirm the reversible electrochemical reactions. Without any binding additives, the as-deposited electrodes delaminate resulting in fast capacity degradation. We demonstrate the mechanical nature of this degradation through decreased electrode thinning, resulting in cells with improved cycling stability due to increased mechanical stability. Combining composition and electrochemical analysis, this work demonstrates for the first time composition dependent electrochemical properties for the ternary Zn 1-x Sn 1+x N 2 and proposes earth-abundant ternary nitride anodes for increased reversible capacity and cycling stability.

25 ENERGY STORAGE↗
DOE OSTI2022

Band gap and electronic structure of defects in the ternary nitride BP 3 N 6 : experiment and theory

Recent advances in methods to access nitride systems by a high-pressure high-temperature approach have made possible the one-step synthesis of mixed ternary non-metal nitrides. As a prerequisite to use in a practical device, it is important to understand important bulk electronic properties, such as the band gap, as well as characterizing the presence and effect of defects that are present. In this work, the novel ternary nitride BP 3 N 6 is studied using techniques sensitive to the partial electronic density of states, specifically X-ray absorption spectroscopy and X-ray emission spectroscopy. Complementary full-potential all-electron density functional theory (DFT) calculations allow important bulk electronic parameters, such as the band gap, to be elucidated. The band gap of BP 3 N 6 has been determined to be 3.9 ± 0.2 eV and 4.1 ± 0.4 eV at the B K- and N K-edges, respectively. This is close to a theoretical value of 4.3 eV predicted by the PBEsol exchange–correlation functional and considerably less than a value of 5.8 eV predicted by the modified Becke–Johnson exchange–correlation functional. X-Ray excited optical luminescence (XEOL) measurements are performed to interrogate the presence of point defects in this system. Together with DFT calculations, these measurements reveal the presence of nitrogen vacancies which lead to multiple mid-gap trap states.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Synthesis and Structural Study of Substituted Ternary Nitrides for Ammonia Production

Over the past few decades, inorganic nitride materials have grown in importance in part due to their potential as catalysts for the synthesis of NH 3 , a key ingredient in fertilizer and precursor to industrial chemicals. Of particular interest are the ternary (ABN) or higher-order nitrides with high metal-to-nitrogen ratios that show promise in enhancing NH 3 synthesis reaction rates and yields via heterogeneous catalysis or chemical looping. Although metal nitrides are predicted to be numerous, the stability of nitrogen triple bonds found in N 2 , especially in comparison to the metal–nitrogen bonds, has considerably hindered synthetic efforts to produce complex nitride compounds. In this study, we present an exhaustive down-selection process to identify ternary nitrides for a promising chemical looping NH 3 production mechanism. We also report on a facile and efficient two-step synthesis method that can produce well-characterized η-carbide Co 3 Mo 3 N/Fe 3 Mo 3 N or filled β-manganese Ni 2 Mo 3 N ternaries, as well as their associated quaternary, (Co,Fe) 3 Mo 3 N, (Fe,Ni) 2 Mo 3 N, and (Co,Ni) 2 Mo 3 N, solid solutions. To further explore the quaternary space, syntheses of (Co,Ni) 3 Mo 3 N (Ni ≤ 10 mol %) and Co 3 (Mo,W) 3 N (W ≤ 10 mol %) were also investigated. The structures of the nitrides were characterized via X-ray powder diffraction. The morphology and compositions were characterized with scanning electron microscopy. In conclusion, the multitude of chemically unique, but structurally related, nitrides suggests that properties such as nitrogen activity may be tunable, making the materials of great interest for NH 3 synthesis schemes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Investigation of Off-Stoichiometry in Ternary Nitrides by EDS and HRTEM

We demonstrate an inverted metamorphic multijunction (IMM) photovoltaic cell comprising lattice-mismatched 1.2 eV AlGaInAs and 1.0 eV GaInAs junctions optimized for high-temperature thermophotovoltaic (TPV) applications. This device differs from traditional IMM solar cells because the mismatched junctions are grown at a single lattice constant. This architecture enables removal of the compositionally graded buffer which otherwise filters light from the junctions below and absorbs sub-bandgap light via free-carrier absorption. Sub-bandgap absorption dramatically reduces the efficiency of TPV systems using high reflectivity cells to enable bandedge spectrum filtering. Three components required development to enable this device: 1) a lattice-mismatched 1.2 eV AlGaInAs junction, 2) a metamorphic contact layer grown after the graded buffer, and 3) a transparent tunnel junction that sits in front of the 1.0 eV GaInAs junction. Growth conditions that minimize oxygen defect incorporation maximize AlGaInAs cell quality, enabling a 0.41 V bandgap open circuit voltage offset at 22 mA/cm2 under AM1.5D. A mismatched GaInAs:Se layer is developed as a low resistance contact. Lastly we develop a GaAsSb:C/GaInP:Se tunnel junction suitable for high-power densities with more transparency than the GaAsSb:C/GaInP:Se structure used in past IMM cells. We characterize the tandem device under a high-intensity spectrum that approximates the emission from a 2150 °C blackbody radiator and deduce a projected ideal TPV efficiency of 39.9% at ~30% of the blackbody irradiance, and 36% ideal TPV efficiency under the full 118 W/cm2 irradiance. Improvements to the back-surface reflectivity and series resistance are expected to increase the ideal TPV efficiency well above 40%.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Reactive flash sintering of TiZrN and TiAlN ternary metal nitrides

Here, this study demonstrated the reactive flash sintering (RFS) for two powder mixtures: TiN-ZrN (both conducting) and AlN-TiN (TiN conducting but AlN insulating), targeting ternary metal nitrides (TMN) of Ti 0.5 Zr 0.5 N and Ti 0.5 Al 0.5 N, respectively. A constant volage and pressure (e.g., 8 V DC, ∼15 MPa) at room temperature triggered the flash (current density up to 27 A/mm 2 ) without pre-heating, and the entire RFS process finished in a few minutes. For TiZrN, the flash was instantaneous whereas for TiAlN, there was a long incubation before the flash followed by a quick and dramatic flash. Both conventional ex situ XRD and in situ synchrotron study had been carried out. They showed a uniform Ti 0.57 Zr 0.43 N solution formed in RFS and persisted upon cooling, while (Ti, Al) N solid solution formed at high temperature was not stable and likely went through a very quick phase separation in the cooling process. The final products from RFS had been characterized using SEM/EDS for microstructure. Both TiZrN and TiAlN were dense. Distribution of Ti, Zr, and N was uniform for TiZrN; for TiAlN, Ti and N distribution was uniform, while association of Al with oxygen was observed. TGA-DSC revealed the onset oxidation temperature for TiZrN was comparable to TiN and ZrN, while it was higher by ∼200 °C for TiAlN, likely due to the formation of Al 2 O 3 . In terms of mechanical properties such as hardness or fracture toughness, forming a single-phase solid solution (like TiZrN) does not offer obvious benefits. while large grain size from RFS seemed to be unfavorable. Future optimization of RFS condition and in-depth study by both experiments and simulation are needed to fully understand the composition-processing-structure-property relationships for such TMN from the reactive flash sintering process.

Flash Sintering↗
DOE OSTI2021

Exploring the phase space of Zn 2 SbN 3 , a novel semiconducting nitride

The novel semiconductor Zn 2 SbN 3 is one of a growing list of ternary nitrides with promise for optoelectronic and energy applications. Previous work by Arca et al. [Materials Horizons, 2019, 6, 1669–1974] first reported synthesis of this material, but did not explore the effects of growth conditions on material formation. In this work, we present a semi-automated study of the relationship between growth conditions and crystallinity via high-throughput RF sputtering and a custom X-ray diffraction analysis routine. Zn 2 SbN 3 is found to crystallize in a wide range of growth conditions, and the formation of several contaminant phases is examined. Electron microscopy of these secondary phases, caused both by off-stoichiometry and by growth conditions, provides insight into the growth mechanisms of Zn 2 SbN 3 . Furthermore, computational work relates this material to other Zn-based ternary nitrides and offers an explanation for the difficulty of growing cation-ordered material despite the wide range of growth conditions explored.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Solar-Thermal Ammonia Production Via a Nitride Looping Cycle [Slides]

Solar Thermal Ammonia Production has the potential to synthesize ammonia in a green, renewable process that can greatly reduce the carbon footprint left by conventional Haber-Bosch reaction. Ternary nitrides in the family A 3 B x N (A=Co, Ni, Fe; B=Mo; x=2,3) have been identified as a potential candidate for NH 3 production. Experiments with Co 3 Mo 3 N in Ammonia Synthesis Reactor demonstrate cyclable NH 3 production from bulk nitride under pure H 2 . Production rates were fairly flat in all the reduction steps with no evident dependence on the consumed solid-state nitrogen, as would be expected from catalytic Mars-van Krevelen mechanism. Material can be re-nitridized under pure N 2 . Bulk nitrogen per reduction step average between 25 – 40% of the total solid-state nitrogen. Selectivity to NH 3 stabilized at 55 – 60% per cycle. Production rates (NH 3 and N 2 ) become apparent above 600 °C at P(H 2 ) = 0.5 – 2 bar. Optimal point of operation to keep selectivity high without compromising NH 3 rates currently estimated at 650 °C and 1.5 - 2 bar. The next steps are to optimize production rates, examine effect of N 2 addition in NH 3 synthesis reaction, and test additional ternary nitrides.

14 SOLAR ENERGY↗
DOE OSTI2026

Synthesis and Properties of Bulk Mg 3 WN 4 in a Wurtzite-Derived Structure

Experimental synthesis of theoretically predicted materials with controlled elemental coordination environments can lead to the realization of useful properties, such as facile ion transport or ferroelectric switching. Among such materials are ternary nitrides in the Mg−W−N composition space, where several stable and metastable compounds have been predicted and synthesized recently in bulk and film forms. Here, we report for the first time on the bulk synthesis of Mg 3 WN 4 in a wurtzite-derived crystal structure via a solid-state metathesis reaction. In situ synchrotron powder X-ray diffraction shows how the ion exchange proceeds from Li 6 WN 4 + MgCl 2 precursors to Mg 3 WN 4 + LiCl products, with the reaction starting slowly near 380 °C and completing by 600 °C, including the presence of a competing disordered rocksalt-derived phase (Mg,W)N above 440 °C. The follow-up ex situ powder synthesis at 400 °C for 0.5 h with 10% excess MgCl 2 reveals the cation-ordered nature of the wurtzite-derived Mg 3 WN 4 structure with polar symmetry confirmed by second-harmonic generation measurements. Optical absorption spectra, chemical composition analysis, and electron microscopy imaging suggest that bulk Mg 3 WN 4 obtained via metathesis reaction is prone to defect formation. Overall, this study shows that selective ex situ synthesis of the phase-pure ternary nitrides, informed by in situ measurements, is possible by carefully controlling the thermal budget of the reaction and paves the way toward property characterization of the Mg 3 WN 4 wurtzite-derived material.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Realization of Non‐Equilibrium Wurtzite Structure in Heterovalent Ternary MgSiN 2 Film Grown by Reactive Sputtering

The piezoelectric and ferroelectric applications of heterovalent ternary materials are not well explored. Epitaxial MgSiN 2 films are grown at 600 °C on (111)Pt//(001)Al 2 O 3 substrates by the reactive sputtering method using metallic Mg and Si under the N 2 atmosphere. Detailed X-ray diffraction measurements and transmission electron microscopy observations revealed that the epitaxially grown films on the substrates have a hexagonal wurtzite structure with c-axis out-of-plane orientation. The random occupation of this structure by Mg and Si differs from that of the previously reported structure in which these two cations periodically occupy the cationic sites. However, the lattice spacings closely approximate those that are previously reported, irrespective of the ordering, and they are almost comparable with those of (Al 0.8 Sc 0.2 )N. The wide bandgap of >5.0 eV in deposited MgSiN 2 is compatible with that of AlN and suggests durability against the application of strong external electric fields, possibly to induce polarization switching. In addition, MgSiN 2 is shown to have piezoelectric properties with an effective d 33 value of 2.3 pm V −1 for the first time. This work demonstrates the compositional expansion of hexagonal wurtzite to heterovalent ternary nitrides for novel piezoelectric materials, whose ferroelectricity is expected.

36 MATERIALS SCIENCE↗
DOE OSTI2025

ZnTiN 2 as an Electron-Selective, Protective Layer on Si Photocathodes

Photoelectrochemical production of fuels requires photoelectrodes that efficiently convert sunlight to electrochemical energy by producing photovoltage and photocurrent and maintain this ability over time under a variety of pH, illumination, and applied bias conditions. Work in the photovoltaic community has demonstrated that interfaces with high charge carrier selectivity provide high photovoltages. This offers a co-design opportunity to create semiconductor photoelectrodes with contact layers that are both carrier-selective and offer protection from degradation in aqueous solutions. In this work, we explored the ternary nitride ZnTiN 2 as an electronselective, protective layer for Si-based photocathodes. We demonstrated that ZnTiN 2 formed a heterojunction with p-type Si that facilitated electron movement toward the ZnTiN 2 surface for light-driven reduction reactions. Across a variety of electrolyte conditions, ZnTiN 2 /Si produced an open circuit voltage of ca. 400 mV vs the solution potential, while bare Si produced 220−480 mV vs the solution potential depending on conditions. ZnTiN 2 was also shown to protect Si over 72 h at open circuit in the dark in 0.1 M KHCO 3 aqueous solution at pH 10.5, with a 2.4% loss in open circuit voltage compared to a 17% loss for unprotected Si. A protective effect was also observed under illumination during methyl viologen reduction at pH 3.5 for 21 h, with a 2.5% loss in open circuit voltage observed for ZnTiN 2 /Si compared to a 25% loss in open circuit voltage for unprotected Si under the same conditions. Elemental characterization revealed the presence of oxides on the surface of ZnTiN 2 that are consistent with the Pourbaix diagram after photoelectrochemical operation; these oxides appeared to support durability without hindering charge carrier extraction to drive electrochemical work. This work highlights the promise of ZnTiN 2 for durable photoelectrochemical applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗