Search NASA⌕ Search

SEARCH · Search NASA

Results for “urea”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Single-Phase Spinel NiCo 2 O 4 as Highly Active and Stable Electrocatalysts for Urea Oxidation Reaction in Urea Electrolysis

Exploring and designing a stable and active catalyst for the urea electro-oxidation reaction (UOR, CO(NH 2 ) 2 + 6OH – → CO 2 + N 2 + 5H 2 O + 6e – ) is crucial for the long-term sustainability of ecological systems and clean energy production. We found that spinel NiCo 2 O 4 is a stable and active electrocatalyst for UOR at a relatively low anodic potential without triggering the competing oxygen evolution reaction (OER). A urea electrolysis cell (CO(NH 2 )2 + H 2 O → CO 2 + N 2 + 2H 2 ) utilizing a spinel NiCo 2 O 4 anode and a commercial Pt cathode was further characterized through galvanostatic polarization tests, demonstrating excellent structural stability at various current densities. Post-mortem analysis of long-term urea electrolysis measurements suggested that NiCo 2 O 4 electrocatalysts maintained a stable spinel structure. However, redistribution of Ni 3+ to Ni 2+ valence on the catalyst surface was observed, in contrast to the intact Co valence, indicating that (i) Ni sites are active toward urea adsorption and sequential electro-oxidation; (ii) while urea oxidation proceeds primarily through the direct electro-oxidation mechanism, chemical reactions between the Ni 3+ site and urea occur during long-term electrochemical UOR operation. Density functional theory (DFT) simulations were used to calculate the adsorption energies of urea molecules on NiO, Co 3 O 4 , and NiCo 2 O 4 , revealing the importance of regulating the configuration of adsorbed urea molecules on the NiCo 2 O 4 surface.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Biomass Production of Prairie Cordgrass (Spartina pectinata Link.) Using Urea and Kura Clover (Trifolium ambiguum Bieb.) as a Source of Nitrogen

Abstract Optimizing nitrogen (N) management is an important factor for sustainable perennial biomass systems. However, N application is costly, both financially and environmentally. Our objectives were to determine: (1) N rate and plant spacing effects on yield and yield components of prairie cordgrass swards and (2) fertilizer N replacement value (FNRV) of kura clover in prairie cordgrass-kura clover binary mixtures. Plots were established in Illinois, Minnesota, South Dakota, and Wisconsin, USA, in 2010. Kura clover was transplanted on 30-cm centers in all treatments in which it was a component; prairie cordgrass seedlings were transplanted within the kura clover on 60- and 90-cm centers. Monoculture prairie cordgrass stands were established at the same population densities of mixed stands and fertilized with 0, 75, 150, or 225 kg N ha -1 . Biomass was harvested in the autumn from 2011 to 2013. N (urea), year, plant spacing, and year × plant spacing affected prairie cordgrass production at all locations. Prairie cordgrass yield increased with N application, but the response varied by location. N application tended to increase prairie cordgrass tiller density and consistently increased tiller mass. Prairie cordgrass yield with 0 N was equal to or less than the yield of prairie cordgrass/kura clover mixtures at all locations in 2011 and 2012; however, kura clover provided a FNRV of 25–82 kg N ha -1 to prairie cordgrass in 2013. Kura clover has potential to provide N to prairie cordgrass in binary mixtures of these two species and on land that may not be easily farmed due to wetness.

Energy & Fuels↗
DOE OSTI2023

Techno-economic optimization of renewable urea production for sustainable agriculture and CO 2 utilization

Abstract Urea is the most used nitrogen fertilizer due to its ease of storage, transportation, and application. It is made by combining ammonia and carbon dioxide (CO 2 ), both of which are produced predominantly from fossil fuels at present. The recent momentum behind ammonia production using renewable-powered electrolysis offers an opportunity to both make urea in a more sustainable way and utilize CO 2 from external sources. In this work, we present a techno-economic optimization model to minimize the cost of making urea in this way. The model allows for time-varying chemical production in response to renewable variability by simultaneously optimizing production facility design and hourly operation. We performed a case study for Minnesota considering the use of byproduct CO 2 from bioethanol production. We found that the present-day levelized cost of renewable urea is between $268 mt −1 and $413 mt −1 at likely implementable production scales up to 250 000 mt yr −1 . This is within the range of historical conventional urea prices while offering at least 78% carbon intensity reduction. Projecting to 2030, there is a clear economic case for renewable urea production with levelized cost as low as $135 mt −1 due to technology improvement and electrolysis manufacturing expansion, facilitating a urea production scale increase to 525 000 mt yr −1 . Optimal facilities use wind energy, with hydrogen and ammonia production operating in a flexible, time-varying way to minimize battery and hydrogen storage capacities. Urea production operates near steady state due to the relatively low cost of intermediate ammonia buffer storage. A mix of imported methane and locally produced hydrogen are used to provide heat for steam consumed in the urea synthesis.

Chemistry↗
DOE OSTI2025

Titanium nitride prepared by the urea-glass synthesis gives an active electrocatalyst for the oxygen reduction reaction

Rock-salt-structured titanium nitride (TiN) has emerged as a leading earth-abundant electrocatalyst for the oxygen reduction reaction (ORR). We compare TiN prepared in three ways starting from urea: the urea–glass method, by a direct reaction between urea and titanium(IV) chloride, and through a discrete monomeric complex. In the urea-glass route, a new-found [Ti 4 (µ-O) 6 (OC(NH 2 ) 2 ) 12 ] 4+ oxo-bridged titanium–urea precursor can be synthesized in a single-pot reaction at room temperature starting from titanium(IV) chloride, urea, and ethanol with a urea-to-titanium ratio of 6. Subsequent annealing of the polymeric gel that results at 750 °C in an N 2 atmosphere yields phase-pure, TiN particles on the 100 µm size scale. TiN can be deposited as an ink with PiperlON®anion exchange dispersion onto a glassy carbon rotating disk electrode (RDE), and of the three synthesis methods, the urea-glass method gives the most active ORR catalyst. The onset potential for ORR activity is −131 mV vs. Hg/HgO, and Koutecký–Levich analysis of linear-sweep voltammetry recorded at varying rotation rates supports a two-electron reduction pathway to H 2 O 2 , with a rate constant of 0.0172 cm s −1 . The higher activity is ascribed to a more oxygen-rich surface—boh defect sites and active oxygen species—afforeded by the oxo-bridged precursor, corrorborated by X-ray photoelectron spectroscopy (XPS) analysis.

Xie, Wanrui [University of Michigan, Ann Arbor, MI↗
DOE OSTI2021

Density Functional Theory Investigation of the NiO@Graphene Composite as a Urea Oxidation Catalyst in the Alkaline Electrolyte

Developing efficient and low-cost urea oxidation reaction (UOR) catalysts is a promising but still challenging task for environment and energy conversion technologies such as wastewater remediation and urea electrolysis. In this work, NiO nanoparticles that incorporated graphene as the NiO@Graphene composite were constructed to study the UOR process in terms of density functional theory. The single-atom model, which differed from the previous heterojunction model, was employed for the adsorption/desorption of urea and CO 2 in the alkaline media. As demonstrated from the calculated results, NiO@Graphene prefers to adsorb the hydroxyl group than urea in the initial stage due to the stronger adsorption energy of the hydroxyl group. After NiOOH@Graphene was formed in the alkaline electrolyte, it presents excellent desorption energy of CO 2 in the rate-determining step. Electronic density difference and the d band center diagram further confirmed that the Ni(III) species is the most favorable site for urea oxidation while facilitating charge transfer between urea and NiO@Graphene. Moreover, graphene provides a large surface for the incorporation of NiO nanoparticles, enhancing the electron transfer between NiOOH and graphene and promoting the mass transport in the alkaline electrolyte. Notably, this work provides theoretical guidance for the electrochemical urea oxidation work.

25 ENERGY STORAGE↗
DOE OSTI2023

MXene Nanosheets Functionalized with Cu Atoms for Urea Adsorption in Aqueous Media

Ti 3 C 2 T x MXene is an emerging family of two-dimensional materials, and because of its large specific surface area, it has potential for many applications. Herein, a new application using Cu-doped MILD (minimally intensive layer delamination) synthesized Ti 3 C 2 T x MXene for urea removal is demonstrated. The doping of Cu on MXene results in an increase in its affinity for urea adsorption as compared to the pristine MILD synthesized MXene due to the formation of the Cu–urea complex. Previous computational studies have shown that the adsorption energies of urea on the MXene surface can be improved in the presence of Cu. The valence state of Cu in the doped MILD synthesized MXene, which binds on to the surface via Ti–O–Cu linkage, is between 0 and +1 as verified by XAS and XPS. As the optimal urea adsorption occurs on Cu as a single atom site, an increase in Cu doping on MXene does not increase urea removal due to Cu agglomeration. Furthermore, looking at the adsorption behaviour, it seems that Cu-doped MXene follows the monolayer adsorption on homogenous surface model.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Minimum conditions for accurate modeling of urea production via co-electrolysis

Co-electrolysis of carbon oxides and nitrogen oxides promise to simultaneously help restore the balance of the C and N cycles while producing valuable chemicals such as urea. However, co-electrolysis processes are still largely inefficient and numerous knowledge voids persist. Here, we provide a solid thermodynamic basis for modelling urea production via co-electrolysis. First, we determine the energetics of aqueous urea produced under electrochemical conditions based on experimental data, which enables an accurate assessment of equilibrium potentials and overpotentials. Next, we use density functional theory (DFT) calculations to model various co-electrolysis reactions producing urea. The calculated reaction free energies deviate significantly from experimental values for well-known GGA, meta-GGA and hybrid functionals. These deviations stem from errors in the DFT-calculated energies of molecular reactants and products. In particular, the error for urea is approximately -0.25 ± 0.10 eV. Finally, we show that all these errors introduce large inconsistencies in the calculated free-energy diagrams of urea production via co-electrolysis, such that gas-phase corrections are strongly advised.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Fabrication and Characterization of Cross-Linked Phenyl-Acrylate-Based Ion Exchange Membranes and Performance in a Direct Urea Fuel Cell

Ion exchange membranes (IEMs) are crucial for direct fuel cells, including direct methanol and direct urea fuel cells (DUFCs). While commercially available IEMs (e.g., FAA-3-50) show decent power density in direct fuel cells, they experience considerable methanol or urea crossover, reducing device performance and motivating design of IEMs that suppress fuel crossover. Here, we prepare cross-linked IEMs with high mechanical toughness utilizing a cross-linker (methylenebis(acrylamide)), hydrophobic monomer (phenyl acrylate (PA) or phenyl methacrylate (PMA)), and charged monomer (2-acrylamido-2-methyl-1-propanesulfonic acid (AMPS) for cation exchange or methacroylcholine chloride (MACC) for anion exchange). To validate these membranes in a fuel cell application, we perform DUFC experiments utilizing a PA/MACC AEM and observe good power density compared to FAA-3-50. Furthermore, to understand the role of urea crossover in DUFC performance, permeabilities of both membranes to urea are measured by diffusion cells with in situ ATR-FTIR spectroscopy, where our PA/MACC exhibited lower urea permeability than FAA-3-50.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Impact of a Novel Nickel-Based Catalyst and Phenyl-Acrylate-Based Anion-Exchange Membrane in a Direct Urea Fuel Cell

Developing target-specific catalysts and anion-exchange membranes (AEMs) is crucial for direct urea fuel cell (DUFC) performance. To advance the DUFC system, we developed an anode catalyst with a nickel–iron oxyhydroxide/carbon (NiFeOOH/C) nanofibrous structure for the urea oxidation reaction (UOR), where we optimized the Ni/Fe molar ratio as 6:4. The enhanced electrocatalytic activity of the anode (Ni 6 Fe 4 OOH/C) is attributed to the hydroxide group, which responds with urea molecules to enhance the UOR in a pH-neutral system. Here, we employed a recently developed cross-linked phenyl-acrylate-based AEM (PA/M). A DUFC prepared with the anode and PA/M generates a maximum power density of 11.1 mW/cm 2 and 0.92 V open-circuit voltage under 3 M urea as fuel at 25 °C. We further analyzed the applicability of PA/M in a DUFC system by measuring the urea partition coefficients and permeabilities over a range of concentrations.

10 SYNTHETIC FUELS↗
DOE OSTI2026

Urea-to-Ammonia Conversion at Proteus mirabilis Modified Pt–Ni/BDD Electrodes

Efficient wastewater recycling technologies are essential for long-duration space missions and sustainable water management on Earth. Here, a bioelectrochemical system integrating Proteus mirabilis with a platinum–nickel-modified boron-doped diamond electrode (Pt–Ni/BDDE) for urea-to-ammonia conversion in synthetic urine is presented. Immobilized P. mirabilis catalyzes enzymatic ureolysis, converting urea into ammonia, which is subsequently oxidized electrochemically, and no direct electrochemical urea oxidation is observed. Cyclic voltammetry (CV) of P. mirabilis on Pt–Ni/BDDE in 0.1 M urea and synthetic urine revealed a broad anodic oxidation peak at approximately 0.55–0.75 V vs Ag/AgCl (sat. KCl), corresponding to ammonia oxidation. Control experiments using bare BDDE and Pt–Ni/BDDE in synthetic urine showed no oxidation peak, establishing that the bioelectrocatalytic response originates exclusively from the bioelectrode interface. Chronoamperometry studies revealed that immobilization potential and time critically influenced bacterial adhesion and electrochemical response, with optimal conditions yielding a maximum current density of 0.0055 mA·cm –2 . These quantitative results establish that microbial ureolysis can be efficiently coupled with advanced electrode materials for urea-to-ammonia conversion, offering a promising self-sustaining strategy for urine processing and water recovery in closed-loop life support systems.

Ammonia↗
DOE OSTI2023

Enhanced Urea Oxidation Electrocatalytic Activity by Synergistic Cobalt and Nickel Mixed Oxides

In this study, exploring reactive and selective Ni-based electrocatalysts for the urea oxidation reaction (UOR) is crucial for developing urea-related energy conversion technologies. Herein, synergistic interactions in Ni/Co mixed oxides/hydroxides enhanced the UOR with low onset potential, fast reaction kinetics, and good selectivity against oxygen evolution reaction (OER). Our electrochemical measurements and theoretical calculations signified the collaborative interaction of Ni/Co mixed oxide/hydroxide heterostructures to enhance UOR activity. Our results showed that Ni 3+ species, formed at high anodic potential, produced a high anodic current primarily from unwanted OER. Instead, the Ni/Co heterostructures with dominant Ni 2+ and Co 3+ species remained stable at low anodic potential and exhibited anodic current exclusively attributed to UOR. This work highlights the importance of tuning valence charges for designing high-performance and selective UOR electrocatalysts to benefit the environmental remediation of urea runoff and enable urea electrolysis for hydrogen production by replacing conventional OER with UOR at the anode.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Electrocatalytic CN Coupling: Advances in Urea Synthesis and Opportunities for Alternative Products

Urea is an essential fertilizer produced through the industrial synthesis of ammonia (NH 3 ) via the Haber–Bosch process, which contributes ≈1.2% of global annual CO 2 emissions. Electrocatalytic urea synthesis under ambient conditions via CN coupling from CO 2 and nitrogen species such as nitrate (NO 3 − ), nitrite (NO 2 − ), nitric oxide (NO), and nitrogen gas (N 2 ) has gained interest as a more sustainable route. However, challenges remain due to the unclear reaction pathways for urea formation, competing reactions, and the complexity of the resulting product matrix. This review highlights recent advances in catalyst design, urea quantification, and intermediate identification in the CN coupling reaction for electrocatalytic urea synthesis. Furthermore, this review explores future prospects for industrial CN coupling, considering potential nitrogen and carbon sources and examining alternative CN coupling products, such as amides and amines.

Chemistry↗
DOE OSTI2023

Base excision repair of the N -(2-deoxy- d - erythro -pentofuranosyl)-urea lesion by the hNEIL1 glycosylase

Abstract The N-(2-deoxy-d-erythro-pentofuranosyl)-urea DNA lesion forms following hydrolytic fragmentation of cis-5R,6S- and trans-5R,6R-dihydroxy-5,6-dihydrothymidine (thymine glycol, Tg) or from oxidation of 7,8-dihydro-8-oxo-deoxyguanosine (8-oxodG) and subsequent hydrolysis. It interconverts between α and β deoxyribose anomers. Synthetic oligodeoxynucleotides containing this adduct are efficiently incised by unedited (K242) and edited (R242) forms of the hNEIL1 glycosylase. The structure of a complex between the active site unedited mutant CΔ100 P2G hNEIL1 (K242) glycosylase and double-stranded (ds) DNA containing a urea lesion reveals a pre-cleavage intermediate, in which the Gly2 N-terminal amine forms a conjugate with the deoxyribose C1′ of the lesion, with the urea moiety remaining intact. This structure supports a proposed catalytic mechanism in which Glu3-mediated protonation of O4′ facilitates attack at deoxyribose C1′. The deoxyribose is in the ring-opened configuration with the O4′ oxygen protonated. The electron density of Lys242 suggests the ‘residue 242-in conformation’ associated with catalysis. This complex likely arises because the proton transfer steps involving Glu6 and Lys242 are hindered due to Glu6-mediated H-bonding with the Gly2 and the urea lesion. Consistent with crystallographic data, biochemical analyses show that the CΔ100 P2G hNEIL1 (K242) glycosylase exhibits a residual activity against urea-containing dsDNA.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Highly Efficient Urea Oxidation via Nesting Nano-Nickel Oxide in Eggshell Membrane-Derived Carbon

Here, we reported a strategy of using an eggshell membrane to produce hierarchically porous carbon as a low-cost substrate for synthesizing a nano-nickel oxide catalyst (C@NiO), which can effectively turn biowaste—urea—into energy through an electrochemical approach. Here, the interwoven carbon networks within NiO led to highly efficient urea oxidation due to the strong synergistic effect. The as-prepared electrode only needed 1.36 V versus reversible hydrogen electrode to realize a high efficiency of 10 mA cm –2 in 1.0 M KOH with 0.33 M urea and delivered an even higher current density of 25 mA cm –2 at 1.46 V, which is smaller than that of the porous carbon and commercial Pt/C catalyst. Benefiting from theoretical calculations, Ni(III) active species and the porous carbon further enabled the electrocatalyst to effectively inhibit the “CO 2 poisoning” of electrocatalysts, as well as ensuring its superior performance for urea oxidation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Atomically dispersed Pt single sites and nanoengineered structural defects enable a high electrocatalytic activity and durability for hydrogen evolution reaction and overall urea electrolysis

The scarcity and high cost of PGM electrocatalysts are the key bottleneck in the mass-scale commercialization of many electrolysis technologies. Bifunctional single-atom electrocatalysts (SACs) are promising alternatives for PGM electrocatalysts in next-generation electrolysis technologies because of their superior intrinsic activity and perfect atom utilization. Regulating the coordination environment of platinum atomic sites identifies their electrocatalytic performance. Therefore, exploring more appropriate supports could facilitate the construction of active and durable electrocatalysts with ultralow noble metal content. Herein, we report on a reliable approach for producing a novel type of SACs composed of atomically dispersed Pt active sites stabilized on defective NiCo layered double hydroxide (Pt/D-NiCo LDH) nanosheets as an ultralow-Pt hybrid electrocatalyst for hydrogen evolution reaction (HER), urea oxidation reaction (UOR), and full urea-water electrolysis. The optimized Pt 1 /D NiCo LDH-24 SAC displays a remarkable HER and UOR performance where it yields a current density of 10 mA cm -2 at 37 mV and 1.25 V vs. RHE for HER and UOR, respectively. Finally, symmetrical urea electrolyzer constructed of Pt 1 /D-NiCo LDH-24 electrodes attains 10 mA cm -2 at a cell voltage of 1.32 V vs. RHE, demonstrating superior activity and durability over 60 h operation when compared to commercial Pt/C( + )||RuO 2 ( - ) system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Quantitative SANS and multi-model analysis of spacer-dependent micellization of urea-based gemini surfactants

The micellization behavior of urea-based cationic gemini surfactants was investigated using small-angle neutron scattering (SANS) with multi-model form factor analysis. A homologous series of surfactants with urea group included in the hydrophobic tail and polymethylene spacers consisting of two to ten methylene units was analyzed using three form factor models: a core–shell ellipsoid and two variants of homogeneous ellipsoids. The results from all models show a consistent trend of the micelle structures, confirming that the spacer length critically influences micellar geometry, aggregation number, and hydration. The surfactant with four CH 2 groups in the spacer formed the largest micelles with the highest aggregation number, while longer spacers led to progressively smaller, more compact aggregates. The shell hydration—quantified as the volume fraction of heavy water within the hydrophilic region—decreased systematically with increasing spacer length due to enhanced hydrophobicity of the headgroup-spacer region. Intermicellar interactions, modeled as screened Coulomb interaction using the rescaled mean spherical approximation (RMSA), revealed the strongest electrostatic repulsion for the case of four methylene groups in the spacer, corresponding to the highest micellar charge and largest interparticle spacing. The observed spacer-dependent trends were robust across all modeling approaches, demonstrating that the spacer length serves as a key structural determinant of self-assembly in this type of urea-based gemini systems. These findings provide insight into the design of gemini surfactants with tailored aggregation behavior for applications in drug delivery, nanostructure templating, and solubilization technologies.

Core–shell ellipsoid model↗
DOE OSTI2021

Ultrafast time-resolved x-ray absorption spectroscopy of ionized urea and its dimer through ab initio nonadiabatic dynamics

Investigating the early dynamics of chemical systems following ionization is essential for our understanding of radiation damage. However, experimental as well as theoretical investigations are very challenging due to the complex nature of these processes. Time-resolved x-ray absorption spectroscopy on a femtosecond timescale, in combination with appropriate simulations, is able to provide crucial insights into the ultrafast processes that occur upon ionization due to its element-specific probing nature. In this theoretical study, we investigate the ultrafast dynamics of valence-ionized states of urea and its dimer employing Tully's fewest switches surface hopping approach using Koopmans' theorem to describe the ionized system. We demonstrate that following valence ionization through a pump pulse, the time-resolved x-ray absorption spectra at the carbon, nitrogen, and oxygen K-edges reveal rich insights into the dynamics. Excited states of the ionized system give rise to time-delayed blueshifts in the x-ray absorption spectra as a result of electronic relaxation dynamics through nonadiabatic transitions. Moreover, our statistical analysis reveals specific structural dynamics in the molecule that induce time-dependent changes in the spectra. For the urea monomer, we elucidate the possibility to trace effects of specific molecular vibrations in the time-resolved x-ray absorption spectra. For the urea dimer, where ionization triggers a proton transfer reaction, we show how the x-ray absorption spectra can reveal specific details on the progress of proton transfer.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗