Search NASA⌕ Search

SEARCH · Search NASA

Results for “urea oxidation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Single-Phase Spinel NiCo 2 O 4 as Highly Active and Stable Electrocatalysts for Urea Oxidation Reaction in Urea Electrolysis

Exploring and designing a stable and active catalyst for the urea electro-oxidation reaction (UOR, CO(NH 2 ) 2 + 6OH – → CO 2 + N 2 + 5H 2 O + 6e – ) is crucial for the long-term sustainability of ecological systems and clean energy production. We found that spinel NiCo 2 O 4 is a stable and active electrocatalyst for UOR at a relatively low anodic potential without triggering the competing oxygen evolution reaction (OER). A urea electrolysis cell (CO(NH 2 )2 + H 2 O → CO 2 + N 2 + 2H 2 ) utilizing a spinel NiCo 2 O 4 anode and a commercial Pt cathode was further characterized through galvanostatic polarization tests, demonstrating excellent structural stability at various current densities. Post-mortem analysis of long-term urea electrolysis measurements suggested that NiCo 2 O 4 electrocatalysts maintained a stable spinel structure. However, redistribution of Ni 3+ to Ni 2+ valence on the catalyst surface was observed, in contrast to the intact Co valence, indicating that (i) Ni sites are active toward urea adsorption and sequential electro-oxidation; (ii) while urea oxidation proceeds primarily through the direct electro-oxidation mechanism, chemical reactions between the Ni 3+ site and urea occur during long-term electrochemical UOR operation. Density functional theory (DFT) simulations were used to calculate the adsorption energies of urea molecules on NiO, Co 3 O 4 , and NiCo 2 O 4 , revealing the importance of regulating the configuration of adsorbed urea molecules on the NiCo 2 O 4 surface.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Density Functional Theory Investigation of the NiO@Graphene Composite as a Urea Oxidation Catalyst in the Alkaline Electrolyte

Developing efficient and low-cost urea oxidation reaction (UOR) catalysts is a promising but still challenging task for environment and energy conversion technologies such as wastewater remediation and urea electrolysis. In this work, NiO nanoparticles that incorporated graphene as the NiO@Graphene composite were constructed to study the UOR process in terms of density functional theory. The single-atom model, which differed from the previous heterojunction model, was employed for the adsorption/desorption of urea and CO 2 in the alkaline media. As demonstrated from the calculated results, NiO@Graphene prefers to adsorb the hydroxyl group than urea in the initial stage due to the stronger adsorption energy of the hydroxyl group. After NiOOH@Graphene was formed in the alkaline electrolyte, it presents excellent desorption energy of CO 2 in the rate-determining step. Electronic density difference and the d band center diagram further confirmed that the Ni(III) species is the most favorable site for urea oxidation while facilitating charge transfer between urea and NiO@Graphene. Moreover, graphene provides a large surface for the incorporation of NiO nanoparticles, enhancing the electron transfer between NiOOH and graphene and promoting the mass transport in the alkaline electrolyte. Notably, this work provides theoretical guidance for the electrochemical urea oxidation work.

25 ENERGY STORAGE↗
DOE OSTI2023

Enhanced Urea Oxidation Electrocatalytic Activity by Synergistic Cobalt and Nickel Mixed Oxides

In this study, exploring reactive and selective Ni-based electrocatalysts for the urea oxidation reaction (UOR) is crucial for developing urea-related energy conversion technologies. Herein, synergistic interactions in Ni/Co mixed oxides/hydroxides enhanced the UOR with low onset potential, fast reaction kinetics, and good selectivity against oxygen evolution reaction (OER). Our electrochemical measurements and theoretical calculations signified the collaborative interaction of Ni/Co mixed oxide/hydroxide heterostructures to enhance UOR activity. Our results showed that Ni 3+ species, formed at high anodic potential, produced a high anodic current primarily from unwanted OER. Instead, the Ni/Co heterostructures with dominant Ni 2+ and Co 3+ species remained stable at low anodic potential and exhibited anodic current exclusively attributed to UOR. This work highlights the importance of tuning valence charges for designing high-performance and selective UOR electrocatalysts to benefit the environmental remediation of urea runoff and enable urea electrolysis for hydrogen production by replacing conventional OER with UOR at the anode.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Highly Efficient Urea Oxidation via Nesting Nano-Nickel Oxide in Eggshell Membrane-Derived Carbon

Here, we reported a strategy of using an eggshell membrane to produce hierarchically porous carbon as a low-cost substrate for synthesizing a nano-nickel oxide catalyst (C@NiO), which can effectively turn biowaste—urea—into energy through an electrochemical approach. Here, the interwoven carbon networks within NiO led to highly efficient urea oxidation due to the strong synergistic effect. The as-prepared electrode only needed 1.36 V versus reversible hydrogen electrode to realize a high efficiency of 10 mA cm –2 in 1.0 M KOH with 0.33 M urea and delivered an even higher current density of 25 mA cm –2 at 1.46 V, which is smaller than that of the porous carbon and commercial Pt/C catalyst. Benefiting from theoretical calculations, Ni(III) active species and the porous carbon further enabled the electrocatalyst to effectively inhibit the “CO 2 poisoning” of electrocatalysts, as well as ensuring its superior performance for urea oxidation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Atomically dispersed Pt single sites and nanoengineered structural defects enable a high electrocatalytic activity and durability for hydrogen evolution reaction and overall urea electrolysis

The scarcity and high cost of PGM electrocatalysts are the key bottleneck in the mass-scale commercialization of many electrolysis technologies. Bifunctional single-atom electrocatalysts (SACs) are promising alternatives for PGM electrocatalysts in next-generation electrolysis technologies because of their superior intrinsic activity and perfect atom utilization. Regulating the coordination environment of platinum atomic sites identifies their electrocatalytic performance. Therefore, exploring more appropriate supports could facilitate the construction of active and durable electrocatalysts with ultralow noble metal content. Herein, we report on a reliable approach for producing a novel type of SACs composed of atomically dispersed Pt active sites stabilized on defective NiCo layered double hydroxide (Pt/D-NiCo LDH) nanosheets as an ultralow-Pt hybrid electrocatalyst for hydrogen evolution reaction (HER), urea oxidation reaction (UOR), and full urea-water electrolysis. The optimized Pt 1 /D NiCo LDH-24 SAC displays a remarkable HER and UOR performance where it yields a current density of 10 mA cm -2 at 37 mV and 1.25 V vs. RHE for HER and UOR, respectively. Finally, symmetrical urea electrolyzer constructed of Pt 1 /D-NiCo LDH-24 electrodes attains 10 mA cm -2 at a cell voltage of 1.32 V vs. RHE, demonstrating superior activity and durability over 60 h operation when compared to commercial Pt/C( + )||RuO 2 ( - ) system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Impact of a Novel Nickel-Based Catalyst and Phenyl-Acrylate-Based Anion-Exchange Membrane in a Direct Urea Fuel Cell

Developing target-specific catalysts and anion-exchange membranes (AEMs) is crucial for direct urea fuel cell (DUFC) performance. To advance the DUFC system, we developed an anode catalyst with a nickel–iron oxyhydroxide/carbon (NiFeOOH/C) nanofibrous structure for the urea oxidation reaction (UOR), where we optimized the Ni/Fe molar ratio as 6:4. The enhanced electrocatalytic activity of the anode (Ni 6 Fe 4 OOH/C) is attributed to the hydroxide group, which responds with urea molecules to enhance the UOR in a pH-neutral system. Here, we employed a recently developed cross-linked phenyl-acrylate-based AEM (PA/M). A DUFC prepared with the anode and PA/M generates a maximum power density of 11.1 mW/cm 2 and 0.92 V open-circuit voltage under 3 M urea as fuel at 25 °C. We further analyzed the applicability of PA/M in a DUFC system by measuring the urea partition coefficients and permeabilities over a range of concentrations.

10 SYNTHETIC FUELS↗
DOE OSTI2024

Double Hydroxide Nanocatalysts for Urea Electrooxidation Engineered toward Environmentally Benign Products

Abstract Recent advancements in the electrochemical urea oxidation reaction (UOR) present promising avenues for wastewater remediation and energy recovery. Despite progress toward optimized efficiency, hurdles persist in steering oxidation products away from environmentally unfriendly products, mostly due to a lack of understanding of structure‐selectivity relationships. In this study, the UOR performance of Ni and Cu double hydroxides, which show marked differences in their reactivity and selectivity is evaluated. CuCo hydroxides predominantly produce N 2 , reaching a current density of 20 mA cm geo −2 at 1.04 V – 250 mV less than NiCo hydroxides that generate nitrogen oxides. A collection of in‐situ spectroscopies and scattering experiments reveal a unique in situ generated Cu (2‐x)+ ‐OO −• active sites in CuCo, which initiates nucleophilic substitution of NH 2 from the amide, leading to N‐N coupling between * NH on Co and Cu. In contrast, the formation of nitrogen oxides on NiCo is primarily attributed to the presence of high‐valence Ni 3+ and Ni 4+ , which facilitates N‐H activation. This process, in conjunction with the excessive accumulation of OH − ions on Jahn‐Teller (JT) distorted Co sites, leads to the generation of NO 2 − as the primary product. This work underscores the importance of catalyst composition and structural engineering in tailoring innocuous UOR products.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Urea-to-Ammonia Conversion at Proteus mirabilis Modified Pt–Ni/BDD Electrodes

Efficient wastewater recycling technologies are essential for long-duration space missions and sustainable water management on Earth. Here, a bioelectrochemical system integrating Proteus mirabilis with a platinum–nickel-modified boron-doped diamond electrode (Pt–Ni/BDDE) for urea-to-ammonia conversion in synthetic urine is presented. Immobilized P. mirabilis catalyzes enzymatic ureolysis, converting urea into ammonia, which is subsequently oxidized electrochemically, and no direct electrochemical urea oxidation is observed. Cyclic voltammetry (CV) of P. mirabilis on Pt–Ni/BDDE in 0.1 M urea and synthetic urine revealed a broad anodic oxidation peak at approximately 0.55–0.75 V vs Ag/AgCl (sat. KCl), corresponding to ammonia oxidation. Control experiments using bare BDDE and Pt–Ni/BDDE in synthetic urine showed no oxidation peak, establishing that the bioelectrocatalytic response originates exclusively from the bioelectrode interface. Chronoamperometry studies revealed that immobilization potential and time critically influenced bacterial adhesion and electrochemical response, with optimal conditions yielding a maximum current density of 0.0055 mA·cm –2 . These quantitative results establish that microbial ureolysis can be efficiently coupled with advanced electrode materials for urea-to-ammonia conversion, offering a promising self-sustaining strategy for urine processing and water recovery in closed-loop life support systems.

Ammonia↗
DOE OSTI2021

Use of microbial carbonation process to enable self‑carbonation of reactive MgO cement mixes

The low hydration and carbonation of reactive MgO cement (RMC) under ambient conditions causes prolonged setting and low compressive strengths (~4 MPa). This study proposed a unique technique which led to the enhancement of the hydration and carbonation processes via the synergistic combination of microbial carbonation process (MCP) with a hydration agent (HA) that enabled the self‑carbonation of RMC-based mixes without using of any special curing environments. Through hydrolysing urea (CO(NH{sub 2}){sub 2}) using ureolytic bacteria, CO{sub 3}{sup 2−} ions were produced to facilitate the carbonation of dissolved Mg{sup 2+} ions to form hydrated magnesium hydroxy carbonates (HMHCs). The self‑carbonation of RMC enabled by the MCP resulted in formation of brucite with a poor crystallinity and its rapid conversion into HMHCs, which improved the setting time and compressive strength of RMC-based samples. The simultaneous use of MCP with 2 M urea and HA revealed HMHCs with improved morphologies, resulting in the highest compressive strength (~15 MPa).

36 MATERIALS SCIENCE↗
DOE OSTI2023

Minimum conditions for accurate modeling of urea production via co-electrolysis

Co-electrolysis of carbon oxides and nitrogen oxides promise to simultaneously help restore the balance of the C and N cycles while producing valuable chemicals such as urea. However, co-electrolysis processes are still largely inefficient and numerous knowledge voids persist. Here, we provide a solid thermodynamic basis for modelling urea production via co-electrolysis. First, we determine the energetics of aqueous urea produced under electrochemical conditions based on experimental data, which enables an accurate assessment of equilibrium potentials and overpotentials. Next, we use density functional theory (DFT) calculations to model various co-electrolysis reactions producing urea. The calculated reaction free energies deviate significantly from experimental values for well-known GGA, meta-GGA and hybrid functionals. These deviations stem from errors in the DFT-calculated energies of molecular reactants and products. In particular, the error for urea is approximately -0.25 ± 0.10 eV. Finally, we show that all these errors introduce large inconsistencies in the calculated free-energy diagrams of urea production via co-electrolysis, such that gas-phase corrections are strongly advised.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Proposed synthesis of a linear poly-ethylenimine with hydroxyl pendants substituents at the adjacent carbon

The synthesis of a linear poly-ethylenimine with pendant hydroxyl groups bonded to backbone carbons adjacent to the backbone amine groups is investigated and compared to the conventional method of functionalizing branched poly-ethylenimine using epoxides for use in direct air capture of carbon dioxide. The addition of hydroxyl groups imparts stability against both oxidative degradation and the formation of urea by reducing the number of primary amines, while the novel method of bonding to the adjacent backbone carbon rather than directly to the amine is hypothesized to retain the higher capacity for carbon dioxide of secondary amines when compared to tertiary amines. We also expect that the hydroxyl substituents will impart stronger hydrogen bonding capabilities, resulting in stronger interactions between adjacent polymer chains and a subsequent decrease in mobility.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Discovery of an ultraspecific triuret hydrolase (TrtA) establishes the triuret biodegradation pathway

Triuret (carbonyldiurea) is an impurity found in industrial urea fertilizer (<0.1% w/w) that is applied, worldwide, around 300 million pounds each year on agricultural lands. In addition to anthropogenic sources, endogenous triuret has been identified in amoeba and human urine, the latter being diagnostic for hypokalemia. The present study is the first to describe the metabolic breakdown of triuret, which funnels into biuret metabolism. We identified the gene responsible for triuret decomposition ( trtA ) in bacterial genomes, clustered with biuH , which encodes biuret hydrolase and has close protein sequence homology. TrtA is a member of the isochorismatase-like hydrolase (IHL) protein family, similarly to BiuH, and has a catalytic efficiency (k cat/ K M ) of 6 x 10 5 M –1 s –1 , a K M for triuret of 20 μM, and exquisite substrate specificity. Indeed, TrtA has four orders of magnitude less activity with biuret. Crystal structures of TrtA in apo and holo form were solved and compared with the BiuH structure. The high substrate selectivity was found to be conveyed by second shell residues around each active site. Mutagenesis of residues conserved in TrtA to the alternate consensus found in BiuHs revealed residues critical to triuret hydrolase activity but no single mutant evolved more biuret activity, and likely a combination of mutations is required to interconvert between TrtA, BiuH functions. TrtA-mediated triuret metabolism is relatively rare in recorded genomes (1–2%), but is largely found in plant-associated, nodulating, and endophytic bacteria. This study suggests functions for triuret hydrolase in certain eukaryotic intermediary processes and prokaryotic intermediary or biodegradative metabolism.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Diesel-Range Fuel Property Effects on Medium-Duty Advanced Compression Ignition for Low-Load NO X Reduction

A diesel premixed-charge compression ignition (PCCI) technique was used at low loads at which exhaust temperature makes urea-selective catalytic reduction (SCR) use for nitrogen oxides (NOx) reduction challenging. A fuels matrix to examine the effects of increasing fuel volatility, bio-blendstocks, and cetane number on PCCI was formulated using a near-constant 15% aromatic content. The results showed that PCCI could provide greater than 67% NOx emissions reductions at 1,200 RPM, 3.1 bar indicated mean effective pressure (IMEP), and 2.0 bar IMEP. The filter smoke number (FSN) could also be reduced relative to a conventional diesel combustion (CDC) baseline. The reductions in FSN were more moderate in the order of 40-50%, depending upon the fuel used, IMEP, and combustion phasing (CA50) timing. Hydrocarbon (HC) emissions could be held to a marginally lower level than CDC emissions at some CA50 conditions by using higher-volatility and higher cetane number fuels and could potentially be traded for further NOx reductions. This outcome is important as it points to the possibility of achieving significant NOx reduction while doing no harm in terms of HC emissions. Carbon monoxide (CO) emissions increased in PCCI, but increasing the fuel volatility and cetane number could be helpful in keeping these emissions at a manageable level.

02 PETROLEUM↗
DOE OSTI2025

Floodplain nitrifiers harbor the genetic potential for utilizing a wide range of organic nitrogen compounds

Organic compounds such as urea and cyanate can serve as nitrogen (N) sources for nitrifying microorganisms, including ammonia-oxidizing archaea (AOA) and bacteria (AOB), complete ammonia-oxidizing (comammox) bacteria, and nitrite-oxidizing bacteria (NOB). Here we investigated metagenome-assembled genomes (MAGs) for all four nitrifier guilds generated from hydrologically variable floodplain sediments of the Wind River Basin (WRB; Riverton, WY, USA) for their genetic potential to utilize organic N compounds. A vast majority of WRB nitrifier MAGs harbored urease (ure) and at least one urea transporter ( utp, urt, dur3 ). AOA were the most abundant and phylogenetically diverse nitrifiers in WRB floodplain sediments. Several AOA MAGs encoded cyanase ( cynS ), nitrilase ( nit1 ), omega-amidase ( nit2 ), nitrile hydratase ( nthA ), and genes related to purine degradation, including biuret hydrolase ( biuH ), oxamic transcarbamylase ( allFGH ), and catabolic carbamate kinase ( allK ). AOA often encoded an uncharacterized amidohydrolase collocated with biuH , rather than allophanate hydrolase ( atzF ). A small number of AOA encoded atzF , functioning in an unknown pathway. AOB and comammox were of relatively low abundance and taxonomic diversity and were present only at certain depths in WRB; however, they encoded triuret/biuret degradation genes ( trtA, biuH , and atzH ), and in comammox, these genes were also collocated with allFGHK . The genetic potential of ammonia oxidizers in the WRB floodplain suggests that organic N may support nitrification in this system. The proposed pathways for utilizing purine degradation products other than urea potentially expand the known metabolic capabilities of AOA, AOB, and comammox bacteria and reveal the possibility for cryptic N cycling between microbial community members.

floodplain↗
DOE OSTI2025

Demonstration of MgCr 2– x Mn x O 4 Spinel Oxide Cathodes in High-Voltage Mg Batteries

Solid-solution oxide spinels with high redox voltages and facile Mg 2+ mobility have been identified as promising candidates for practical, high-voltage cathodes in Mg batteries. In this work, we discuss the development of MgCr 2-x Mn x O 4 [x = 0.5, 1, 1.2] solid-solution spinel oxides as a cathode material and their electrochemical performance paired with an Mg anode in a full cell. This work presents the first demonstration of full cells with these materials. Mg-Cr-Mn spinel oxides with varying Cr and Mn contents were synthesized using alternative synthetic routes for optimal electrochemical performance. High-resolution synchrotron powder X-ray diffraction (PXRD), solid-state nuclear magnetic resonance (NMR) spectroscopy, and electron microscopy showed that these different synthetic routes resulted in changes in structures and particle morphologies, which in turn affect the electrochemical performance. Particularly, the urea coprecipitation synthetic route resulted in high-surface-area particles that enabled lower overpotentials and increased discharge capacity. The high surface area also resulted in expedited structural degradation caused by the irreversible migration of Mg 2+ into normally vacant 16c sites in the spinel lattice. This structural degradation was lessened by using a hydrosauna-urea synthesis method, which decreased the Mg/Mn inversion ratio while retaining high-surface-area particles with good cycling performance. Furthermore, our findings highlight the necessity for high surface area or nanostructured spinel oxide cathodes with minimized Mg-Mn inversion to enable spinel oxide cathodes in Mg full cells.

Mg anode↗
DOE OSTI2025

Electrocatalytic CN Coupling: Advances in Urea Synthesis and Opportunities for Alternative Products

Urea is an essential fertilizer produced through the industrial synthesis of ammonia (NH 3 ) via the Haber–Bosch process, which contributes ≈1.2% of global annual CO 2 emissions. Electrocatalytic urea synthesis under ambient conditions via CN coupling from CO 2 and nitrogen species such as nitrate (NO 3 − ), nitrite (NO 2 − ), nitric oxide (NO), and nitrogen gas (N 2 ) has gained interest as a more sustainable route. However, challenges remain due to the unclear reaction pathways for urea formation, competing reactions, and the complexity of the resulting product matrix. This review highlights recent advances in catalyst design, urea quantification, and intermediate identification in the CN coupling reaction for electrocatalytic urea synthesis. Furthermore, this review explores future prospects for industrial CN coupling, considering potential nitrogen and carbon sources and examining alternative CN coupling products, such as amides and amines.

Chemistry↗