Laser Induced Breakdown Spectroscopy (LIBS): A Potential Technology for Online Process Monitoring of Rare Earth Elements (REE) Recovery
Presented by NETL at Clearwater Clean Energy Conference, 06/19
Engineering topics
Publications and source records attributed to Bhatt, Chet R..
Presented by NETL at Clearwater Clean Energy Conference, 06/19
Presented by NETL at Optics, Photonics & Laser Technologies Conference, 06/19
A prototype Laser Induced Breakdown Spectroscopy (LIBS) sensor is tested for the determination of rare earth elements (Eu and Yb) in liquid and solid samples. The sensor head, built using a monolithic passively Q-switched (PQSW) Nd:YAG laser, produced a 1064 nm laser beam with 3.3 ns pulses and an energy of 4.2 mJ. The measurements show good calibration linearity for both Eu and Yb with R 2 values above 0.99 for all analyzed spectral lines in liquid and solid samples. Limits of Detection (LODs) obtained were as low as 1 ppm, which are comparable to or better than those reported previously by using table top actively Q-switched systems. This study aims to develop a high sensitivity, field deployable sensor for characterizing existing and new sources of rare earth elements
Presented by NETL at APS March Meeting 2019, 03/19
Laser-induced breakdown spectroscopy (LIBS) is an emerging analytical technique for in situ determination of elements in natural resources. The technique is employed for the study of two rare earth elements (Eu and Yb) in aqueous solutions at pressures ranging from ambient to 250 bars. Underwater plasma is created at ambient and elevated pressures to record LIBS spectra from their solutions using Nd:YAG laser operated at its fundamental wavelength of 1064 nm. The effect of CO2 pressure on the characteristic spectral signatures of these two rare earth elements is presented. Variation of intensity, integrated intensity, and width of selected emission lines with CO2 pressure is explained. The technique could potentially be used for the detection of rare earth elements in oceanic, carbon sequestration, and geothermal fluids.
Presented by NETL at Pittcon 2019, 03/19
Underwater laser-induced breakdown spectroscopy has been employed for the measurement of dissolved metals (Mg, Ca, Sr, Ba and Mn) in high-pressure CO 2 -water solutions. The CO 2 pressure was varied over the range from 10 to 400 bars and the concentrations of Mg, Ca, Sr, Ba and Mn were determined by spectral analysis and establishing the calibration curves. Limit of detection (LOD) for Mg, Ca, Sr, Ba, and Mn at 10 bars were found to be 31.7 ppm, 2.5 ppm, 3.3 ppm, 4.4 ppm, and 10.5 ppm, respectively. The LOD for Mg, Ca, Sr, and Ba were unaffected by the pressure however, a 2-fold decrease in LOD of Mn was observed with an increasing pressure from 10 to 400 bars. The results demonstrate that low-ppm range concentrations of Mg, Ca, Sr, Ba and Mn can be precisely measured in CO 2 -charged water at varied pressure conditions by using underwater LIBS. The study has implications in monitoring of CO 2 leak in carbon sequestration.
Presented by NETL at the 43rd International Technical Conference on Clean Energy, 6/18
We present the use of under water laser induced breakdown spectroscopy (LIBS) to detect two rare earth elements; Eu and Yb dissolved in bulk aqueous solutions at ambient and high-pressure conditions. Strong emission lines of Eu and Yb were identified in the underwater LIBS spectra. Temporal evolution of plasma, the effect of laser pulse energy, and the effect of pressure on the spectral emission were studied. Calibration curves were developed to demonstrate the possibility of using LIBS technique for their quantification and limits of detection were estimated.
Laser-induced breakdown spectroscopy (LIBS) was used to detect rare earth elements (REEs) in natural geological samples. Low and high intensity emission lines of Ce, La, Nd, Y, Pr, Sm, Eu, Gd, and Dy were identified in the spectra recorded from the samples to claim the presence of these REEs. Multivariate analysis was executed by developing partial least squares regression (PLS-R) models for the quantification of Ce, La, and Nd. Analysis of unknown samples indicated that the prediction results of these samples were found comparable to those obtained by inductively coupled plasma mass spectrometry analysis. In conclusion, data support that LIBS has potential to quantify REEs in geological minerals/ores.
Presented by NETL at American Physical Society, 3/18
Application of laser-induced breakdown spectroscopy (LIBS) to analyze solid samples and food materials is described in this chapter. A comparative study of the quantitative and qualitative analysis of atomic and molecular emission from LIBS spectra was performed using a mixture of SrCl 2 and Al 2 O 3 in powder form as a sample. The atomic emission from Sr and molecular emission from SrCl and SrO observed in LIBS spectra were analyzed. Calibration data collected at optimum experimental conditions were used to develop calibration curves, which can be used to predict the Sr concentration. Limits of detection for selected atomic and molecular emission spectra were determined. To showcase an application of LIBS technique in food science, analysis of wheat flour tortillas and comparison of organic and conventional vegetables are described. For the comparative study of organic and conventional vegetables, cauliflowers and broccolis were taken as working samples. Presence of the major elemental nutrients in these vegetables was detected by identifying emission lines of those elements in the LIBS spectra obtained from them. Both multivariate and univariate analyses were employed for comparison. Finally, principal component analysis was performed for multivariate analysis, whereas intensities of emission lines of elements were compared in univariate analysis.
Laser-induced breakdown spectroscopy (LIBS) was used for the analysis of charcoal blast furnace slags. Plasma was generated by an application of a 1064 nm wavelength Nd:YAG laser beam to the surface of pellets created from the slags. The presence of Al, Ca, Fe, K, Mg, Mn, and Si was determined by identifying their characteristic spectral signatures. Multivariate analysis was performed for the quantification of these elements. The predicted LIBS results were found in agreement with the inductively coupled plasma optical emission spectrometry analysis. The limit of detection for Al, Ca, Fe, K, Mg, Mn, and Si was calculated to be 0.10%, 0.22%, 0.02%, 0.01%, 0.01%, 0.005%, and 0.18%, respectively.
In this paper, we report the use of laser induced breakdown spectroscopy (LIBS) to detect dissolved Eu and Yb in bulk aqueous solutions. Ten strong emission lines of Eu and one strong emission line of Yb were identified in the underwater LIBS spectra obtained by using Czerny–Turner spectrometer within the wavelength range of 375–515 nm. Temporal evolution of plasma and the effect of laser pulse energy on the spectral emission were studied. Finally, calibration curves using the concentration range from 500 to 10,000 ppm were developed and limits of detection for Eu and Yb were estimated to be 209 and 156 ppm, respectively.
Presented by NETL at ScIX 2017, 10/17
Presented by NETL at South Eastern Geological Society of America, 3/17
Presented by NETL at GSA, 3/17