Engineering topics

Gilbert, John A.

Publications and source records attributed to Gilbert, John A..

At least 19 records

NASA NTRS2001

Analysis of Graphite Reinforced Cementitious Composites

This paper describes analytical methods that can be used to determine the deflections and stresses in highly compliant graphite-reinforced cementitious composites. It is demonstrated that the standard transform section fails to provide accurate results when the elastic modulus ratio exceeds 20. So an alternate approach is formulated by using the rule of mixtures to determine a set of effective material properties for the composite. Tensile tests are conducted on composite samples to verify this approach; and, when the effective material properties are used to characterize the deflections of composite beams subject to pure bending, an excellent agreement is obtained. Laminated composite plate theory is also investigated as a means for analyzing even more complex composites, consisting of multiple graphite layers oriented in different directions. In this case, composite beams are analyzed by incorporating material properties established from tensile tests. Finite element modeling is used to verity the results and, considering the complexity of the samples, a very good agreement is obtained.

Vaughan, Robert E.↗

NASA NTRS1999

Three-Dimensional Displacement Measurement Using Diffractive Optic Interferometry

This paper introduces a powerful new optical method which utilizes diffractive optic interferometry (DOI) to measure both in-plane and out-of-plane displacement with variable sensitivity using the same optical system. Sensitivity is varied by utilizing various combinations of the different wavefronts produced by a conjugate pair of binary Optical elements; a transmission grating is used to produce several illumination beams while a reflective grating replicated on the surface of a specimen, provides the reference for the undeformed state. A derivation of the equations which govern the method is included along with a discussion Of the experimental tests conducted to verify the theory. Overall, the results are excellent, with experimental data agreeing to within a few percent of the theoretical predictions.

Gilbert, John A.↗

NASA NTRS1998

Measuring In-Plane Displacements with Variable Sensitivity Using Diffractive Optic Interferometry

This paper introduces a method called diffractive optic interferometry (DOI) which allows in-plane displacement components to be measured with variable sensitivity. DOI relies on binary optical elements fabricated as phase-type Dammann gratings which produce multiple diffraction orders of nearly equal intensity. Sensitivity is varied by combining the different wavefronts produced by a conjugate pair of these binary optical elements; a transmission element is used to produce several illumination beams while a reflective element, replicated on the surface of a specimen, provides the reference for the undeformed state. The steps taken to design and fabricate these binary optical elements are described. The specimen grating is characterized, and tested on a disk subjected to diametrical compression. Overall, the results are excellent, with experimental data agreeing to within a few percent of the theoretical predictions.

Shepherd, Robert L.↗

NASA NTRS1997

An Investigation into Quantifying Micron-G Changes in a Gravitational Field of 1G

This project called for the development of an accelerometer designed to be used in conjunction with gravity shielding experiments. The device had to measure local gravitational changes on the order of a few micro-G's (micron-G) with a spatial resolution greater than one measurement per ten square centimeters. Measurements had to be made at a minimum rate of two per second. Tasks included the design, development and demonstration of a prototype. The deliverable consisted of three copies of this final report. The study resulted in the development of a Transversely Suspended Accelerometer (TSA) which met all of the technical specifications. Different generations of the device were demonstrated to NASA/MSFC personnel as they were developed. The final prototype is available for further demonstration and future use. The study draws attention to the fact that the magnetic fields required to produce gravitational shielding may result in apparent decreases in the weights of suspended objects on the order of those attributed to the effect itself. This observation reinforces the need to quantify the influences of the magnetic field on any measurement device used to study gravitational shielding. This task was accomplished for the TSA.

Gauthier, Richard R.↗

NASA NTRS1996

Video System For Inspecting Walls Of Cavities

Endoscopic video-imaging system generates panoramic image of part of wall of cavity surrounding tip of probe inserted in cavity. Not necessary to rotate probe to obtain panoramic image. If simple inspection without measurement required, device called "cylindrical light ring" mounted on probe to illuminate scene. Different illumination device used when required to measure distance of wall of cavity from cylindrical axis of probe. System used, for example, to inspect inner surface of tube, passage, or manifold located deep within engine or other complex structure.

Gilbert, John A.↗

NASA NTRS1992

Endoscopic measurements using a panoramic annular lens

The objective of this project was to design, build, demonstrate, and deliver a prototype system for making measurements within cavities. The system was to utilize structured lighting as the means for making measurements and was to rely on a stationary probe, equipped with a unique panoramic annular lens, to capture a cylindrical view of the illuminated cavity. Panoramic images, acquired with a digitizing camera and stored in a desk top computer, were to be linearized and analyzed by mouse-driven interactive software.

Gilbert, John A.↗

NASA NTRS1992

Digital Correlation In Laser-Speckle Velocimetry

Periodic recording helps to eliminate spurious results. Improved digital-correlation process extracts velocity field of two-dimensional flow from laser-speckle images of seed particles distributed sparsely in flow. Method which involves digital correlation of images recorded at unequal intervals, completely automated and has potential to be fastest yet.

Gilbert, John A.↗

NASA NTRS1992

Tethers and their role in the Space Exploration Initiative

This paper addresses some potential applications for tethers in space, and describes a mission designed to deploy a satellite from a Delta II launch vehicle, by NASA's Small Expendable Deployer System, via a 46 km long tether. The mission, targeted for 1993, will contribute to the U.S. Space Exploration Initiative, and along with the shuttle flight of the tethered satellite system, TSS1, will be one of the first attempts to experimentally characterize the dynamics of a tethered system. Data taken from two experimental packages onboard the satellite will be analyzed to verify mathematical simulations related to tether dynamics.

Bankston, Cheryl D.↗

NASA NTRS1992

A photoelastic fiber optic strain gage

This paper reports on the development of a photoelastic fiber optic strain gage sensitive to transverse strain. The sensing element is made from an epoxy resin which is stress frozen to passively achieve the quadrature condition. Light, emitted from an LED operating at 820 nm, is transmitted to and from the sensing element via multimode fibers and the signal is detected using a dual channel operational photodiode/amplifier. This unique combination of optics and electronics produces a fiber optic sensor having a high signal to noise ratio which is lead-in/out insensitive. Results show that strains on the order of 1 microstrain can be measured over an 800 microstrain range and that dummy gages can be used for temperature compensation.

Su, Wei↗

NASA NTRS1992

Measurement of two-dimensional fluid flow by digital correlation of scattered light

Digital correlation is a pattern matching procedure. This procedure has recently been used in two-dimensional fluid flow measurements. Two images of a seeded fluid are taken and the intensity distribution of a small window in the first image is matched in the second image using a statistical correlation method. A series of structure functions have been implemented to improve the accuracy and reliability of the correlation method and new algorithms have been developed to reduce the time required for the correlation computations.

Matthys, Donald R.↗

NASA NTRS1991

Endoscopic inspection using a panoramic annular lens

The objective of this one year study was to design, build, and demonstrate a prototype system for cavity inspection. A cylindrical view of the cavity interior was captured in real time through a compound lens system consisting of a unique panoramic annular lens and a collector lens. Images, acquired with a digitizing camera and stored in a desktop computer, were manipulated using image processing software to aid in visual inspection and qualitative analysis. A detailed description of the lens and its applications is given.

Gilbert, John A.↗

NASA NTRS1991

Endoscopic measurement using radial metrology with digital correlation

Radial metrology combines standard optical measurement techniques with a unique panoramic annular lens (PAL) system to study material properties and deformations on the inner surfaces of the cavities found, for example, inside pipes, tubes, and boreholes. A PAL profilometer using speckle metrology is analyzed and the equations obtained from the analysis are used to calibrate the PAL profilometer when it is used to profile the inner surface of a cylindrical pipe and to measure the deformation of the pipe when it is subjected to diametral compression.

Matthys, Donald R.↗

NASA NTRS1991

Displacement analysis of the interior walls of a pipe using panoramic holo-interferometry

Standard phase-displacement equations, used for both double exposure and real time holo-interferometry, are combined with the geometrical mapping and optical characteristics of panoramic annular lenses to accurately measure surface displacement on the interior wall of a pipe. In this approach, one panoramic annular lens is used to illuminate the surface with coherent light, and the resulting intensity distribution is holographically recorded through a second panoramic annular lens. Interference fringes are obtained in real-time by comparing holograms recorded before and after the pipe is displaced. The annular images and the holographic fringes are acquired and stored digitally in a computer system. Image transformation algorithms are applied to remove optical distortions in the holographic pattern and fringe loci are compared to those predicted on the basis of theory.

Gilbert, John A.↗

NASA NTRS1991

Development of an optical fiber interferometer for detection of surface flaws in aluminum

The main objective was to demonstrate the potential of using an optical fiber interferometer (OFI) to detect surface flaws in aluminum samples. Standard ultrasonic excitation was used to generate Rayleigh surface waves. After the waves interacted with a defect, the modified responses were detected using the OFI and the results were analyzed for time-of-flight and frequency content to predict the size and location of the flaws.

Gilbert, John A.↗

NASA NTRS1991

A PARC system for terminal docking

A Panoramic viewing system for Automated Rendezvous and Capture (PARC) has been proposed as a visual information feedback system for terminal docking/berthing. The system relies on a unique Panoramic Annular Lens (PAL) which captures an image of its surroundings in real time. This paper describes the evolution of the PAL along with technical details of its imaging capabilities. Several examples are given of radial metrology, where PAL imaging systems are used to perform visual inspections and measurements. Digital image acquisition and processing techniques, used to interpret various features appearing in the images and to transform images for improved human viewing, are also included. These discussions are followed by a potential application for PARC involving berthing of active and passive mechanical assemblies associated with Space Station Freedom.

Gilbert, John A.↗

NASA NTRS1991

Variable sensitivity moire interferometry

This paper demonstrates that optical microlithography can be used to produce a crossed grating which diffracts light into multiple orders sufficient to record moire interferograms with sensitivities ranging from 2.0 to 0.285 micron/fringe. The grating profile produced by the method is analyzed to establish the diffraction efficiency in each diffraction order, and generalized expressions are given for variable sensitivity moire interferometry. Experimental tests are conducted to verify analytical arguments. In one of these tests, two different diffraction order pairs are used simultaneously to verify that surface displacement can be measured at different sensitivities.

Johnson-Cole, Helen↗

NASA NTRS1990

Structural monitoring of filamentary composites using embedded fiber optics

The feasibility of monitoring overall integrity of structural components made of filamentary composites, by embedding optical fibers between lamina of a composite beam, is investigated using a beam constructed of Kevlar/epoxy cloth with embedded optical fibers aligned with the longitudinal axis of the beam. Phase changes were monitored in three different optical fibers as the composite beam was subjected to pure bending, and the strain response of the fibers was compared to the strain gage readings taken at the surface, showing a strong correlation between the phase change and the applied deformation.

Cashon, John L.↗

NASA NTRS1990

Measurement of fluid velocity fields using digital correlation techniques

A new aperiodic recording technique for measuring fluid velocity fields by digital correlation is introduced which uses a low-powered He-Ne laser, a desktop computer, and a lightly seeded fluid. In contrast to optical methods, this technique does not need to use laser light to interrogate the image pattern, so no secondary speckle is introduced. Also, the lower limit of displacement measurement is determined by the resolution of the sensor used and the magnification of the camera, and can be much lower than the speckle size, so a considerably wider range of measurement is possible than with optical processing. The technique can be completely automated and is potentially much faster than all of the optical methods currently used for flow visualization.

Matthys, Donald R.↗