Engineering topics
Publications and source records attributed to Michael J. Campola.
We present results and analysis investigating the effects of radiation on a variety of candidate spacecraft electronics to heavy ion and proton induced single-event effects (SEE), proton-induced displacement damage dose (DDD), and total ionizing dose (TID).
We present results and analysis investigating the effects of radiation on a variety of candidate spacecraft electronics to heavy ion and proton induced single-event effects (SEE), proton-induced displacement damage dose (DDD), and total ionizing dose (TID).
Explore the source record for details and available documents.
64 MeV proton irradiation were conducted on pixel technologies that spans the range of commercially available electronic displays for crewed missions. Human-centric optical performance metrics and at-facility characterization techniques are discussed and reported for assessment of pixel radiation susceptibilities.
We present results and analysis investigating the effects of radiation on a variety of candidate spacecraft electronics to heavy ion and proton induced single event effects (SEE), proton-induced displacement damage dose (DDD), and total ionizing dose (TID).
Explore the source record for details and available documents.
The purpose of this test was to characterize the single-event effects (SEE) susceptibility of the Texas Instrument (TI) DRV8881 2.5A Dual H-Bridge Motor Driver. The device’s output was monitored for changes during exposure to heavy-ions at Lawrence Berkeley National Laboratory (LBNL) 88-inch Cyclotron. The main goal of testing was to test for destructive SEEs. Nondestructive SEEs were recorded during testing but not fully characterized. Testing was performed on November 9th and 11th, 2022.
Teledyne’s PE99155 point-of-load buck regulator was tested to evaluate an applicationspecific question about the start-up behavior of the device. This test determined if accumulated total ionizing dose (TID) affected any start-up voltage transient characteristics. Testing was based on pass/fail criterial for the magnitude of the output voltage to ensure the safety of downstream electronics. Two sets of radiation tests were performed. The first group of PE99155s used a high dose rate (HDR) irradiation to 25 krad(Si). A second group of PE99155s used high dose rate irradiation to 30 krad(Si).
This study is to determine the heavy ion induced single event effect (SEE) susceptibility of the Qorvo’s NBB-400 cascadable broadband GaAs amplifier DC to 8GHz.
This study is to characterize the destructive single event latchup (SEL) susceptibility of the MAX1340 analog/digital converter (ADC) or digital/analog converter (DAC). The device was monitored for SEL current events on the power supplies during exposure to a heavy ion beam at Lawrence Berkeley National Laboratory (LBNL) 88-inch Cyclotron.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
The purpose of this testing was to obtain sample pulsed-laser-induced single event transients (SETs) of the Analog Devices AD620 Instrumentation Amplifier. The test was conducted at the Naval Research Laboratory using their two-photon absorption (TPA) laser.
Total ionizing dose, displacement damage dose, and single event effects testing were performed to characterize and determine the suitability of candidate electronics for NASA space utilization. Devices tested include FETs, flash memory, FPGAs, optoelectronics, digital, analog, and bipolar devices.
Explore the source record for details and available documents.
Single-event effects and total ionizing dose testing are described for a 32-layer NAND flash memory, in both SLC and MLC configurations, with special considerations for unique three-dimensional test results. Extraction of three-dimensional heavy-ion test data presents a unique visualization of angular effects in NAND flash. Pattern dependence differences between SLC and MLC mode are noted, along with slightly non-uniform angular cross-section results due to the complex volume. Finally, TID data under different operating and bias conditions shows that the failure point remains the higher-voltage erasure circuitry.
The purpose of this testing was to characterize the pulsed-laser-induced single event effect (SEE) susceptibility of the Texas Instruments LM7171 voltage feedback amplifier. The test was conducted at the Naval Research Laboratory using their two-photon absorption (TPA) laser.
Radiation vulnerability assessment early in spacecraft development is cheaper and faster than in late development phases. RGENTIC and SEAM are two software platforms that can be coupled to provide this type of early assessment. Specifically, RGENTIC is a tool that outputs descriptions of radiation risks based on a selected mission environment and the system’s electronic part portfolio, while SEAM models how radiation-induced faults in electronic parts propagate through a system. In this work, we propose a spacecraft evaluation flow where RGENTIC’s outputs, which are radiation vulnerabilities of electronic parts for a given mission, become inputs to SEAM, resulting in an automatic part-type template palette presented to users so that they can easily begin modeling the occurrence and propagation of radiation-induced faults in their spacecraft. In this context, fault propagation modeling shows how radiation effects impact the spacecraft’s electronics.