Search NASA⌕ Search

Engineering topics

Morgan, Dane

Publications and source records attributed to Morgan, Dane.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Assessing Correlations of Perovskite Catalytic Performance with Electronic Structure Descriptors

Electronic structure descriptors are computationally efficient quantities used to construct qualitative correlations for a variety of properties. In particular, the oxygen p-band center has been used to guide material discovery and fundamental understanding of an array of perovskite compounds for use in catalyzing the oxygen reduction and evolution reactions. Yet, an assessment of the effectiveness of the oxygen p-band center at predicting key measures of perovskite catalytic activity has not been made and would be highly beneficial to guide future predictions and codify best practices. In this work, we have used density functional theory at the Perdew–Burke–Ernzerhof (PBE), PBEsol, PBE + U, strongly constrained and appropriately normed functional, and Heyd–Scuseria–Ernzerhof (HSE06) levels to assess the correlations of numerous measures of catalytic performance for a series of technologically relevant perovskite oxides, using the bulk oxygen p-band center as an electronic structure descriptor. We have analyzed correlations of the calculated oxygen p-band center for all considered functionals with the experimentally measured X-ray emission spectroscopy oxygen p-band center and multiple measures of catalytic activity, including high-temperature oxygen reduction surface exchange rates, aqueous oxygen evolution current densities, and binding energies of oxygen evolution intermediate species. Our findings show that the best correlations for all measures of catalytic activity considered here are made with PBE-level calculations, with strong observed linear correlations with the bulk oxygen p-band center (R 2 = 0.81–0.87). This study illustrates that strong linear correlations between numerous important measures of catalytic activity and the oxygen p-band bulk descriptor can be obtained under a consistent computational framework, and these correlations can serve as a guide for future experiments and simulations for development of perovskite and related oxide catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Automated defect analysis in electron microscopic images

Electron microscopy and defect analysis are a cornerstone of materials science, as they offer detailed insights on the microstructure and performance of a wide range of materials and material systems. Building a robust and flexible platform for automated defect recognition and classification in electron microscopy will result in the completion of analysis orders of magnitude faster after images are recorded, or even online during image acquisition. Automated analysis has the potential to be significantly more efficient, accurate, and repeatable than human analysis, and it can scale with the increasingly important methods of automated data generation. Herein, an automated recognition tool is developed based on a computer vison–based approach; it sequentially applies a cascade object detector, convolutional neural network, and local image analysis methods. We demonstrate that the automated tool performs as well as or better than manual human detection in terms of recall and precision and achieves quantitative image/defect analysis metrics close to the human average. The proposed approach works for images of varying contrast, brightness, and magnification. Furthermore, these promising results suggest that this and similar approaches are worth exploring for detecting multiple defect types and have the potential to locate, classify, and measure quantitative features for a range of defect types, materials, and electron microscopic techniques.

47 OTHER INSTRUMENTATION↗
DOE OSTI2018

High Fidelity Ion Beam Simulation of High Dose Neutron Irradiation

The objective of this proposal is to demonstrate the capability to predict the evolution of microstructure and properties of structural materials in-reactor and at high doses, using ion irradiation as a surrogate for reactor irradiations. “Properties” includes both physical properties (irradiated microstructure) and the mechanical properties of the material. Demonstration of the capability to predict properties has two components. One is ion irradiation of a set of alloys to yield an irradiated microstructure and corresponding mechanical behavior that are substantially the same as results from neutron exposure in the appropriate reactor environment. Second is the capability to predict the irradiated microstructure and corresponding mechanical behavior on the basis of improved models, validated against both ion and reactor irradiations and verified against ion irradiations. Taken together, achievement of these objectives will yield an enhanced capability for simulating the behavior of materials in reactor irradiations.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2018

Transition state redox during dynamical processes in semiconductors and insulators

Activation barriers associated with ion diffusion and chemical reactions are vital to understand and predict a wide range of phenomena, such as material growth, ion transport, and catalysis. In the calculation of activation barriers for non-redox processes in semiconductors and insulators, it has been widely assumed that the charge state remains fixed to that of the initial electronic ground state throughout a dynamical process. In this work, we demonstrate that this assumption is generally inaccurate and that a rate-limiting transition state can have a different charge state from the initial ground state. This phenomenon can significantly lower the activation barrier of a dynamical process that depends strongly on charge state, such as carbon vacancy diffusion in 4H-SiC. With inclusion of such transition state redox, the activation barrier varies continuously with Fermi level, in contrast to the step-line feature predicted by the traditional fixed-charge assumption. In this study, a straightforward approach to include the transition state redox effect is provided, the typical situations where the effect plays a significant role are identified, and the relevant electron dynamics are discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Strain control of oxygen kinetics in the Ruddlesden-Popper oxide La 1.85 Sr 0.15 CuO 4

Oxygen defect control has long been considered an important route to functionalizing complex oxide films. However, the nature of oxygen defects in thin films is often not investigated beyond basic redox chemistry. One of the model examples for oxygen-defect studies is the layered Ruddlesden–Popper phase La 2-x Sr x CuO 4-δ (LSCO), in which the superconducting transition temperature is highly sensitive to epitaxial strain. However, previous observations of strain-superconductivity coupling in LSCO thin films were mainly understood in terms of elastic contributions to mechanical buckling, with minimal consideration of kinetic or thermodynamic factors. Here, we report that the oxygen nonstoichiometry commonly reported for strained cuprates is mediated by the strain-modified surface exchange kinetics, rather than reduced thermodynamic oxygen formation energies. Remarkably, tensile-strained LSCO shows nearly an order of magnitude faster oxygen exchange rate than a compressively strained film, providing a strategy for developing high-performance energy materials.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Work function and surface stability of tungsten-based thermionic electron emission cathodes

Materials that exhibit a low work function and therefore easily emit electrons into vacuum form the basis of electronic devices used in applications ranging from satellite communications to thermionic energy conversion. W–Ba–O is the canonical materials system that functions as the thermionic electron emitter commercially used in a range of high-power electron devices. However, the work functions, surface stability, and kinetic characteristics of a polycrystalline W emitter surface are still not well understood or characterized. In this study, we examined the work function and surface stability of the eight lowest index surfaces of the W–Ba–O system using density functional theory methods. We found that under the typical thermionic cathode operating conditions of high temperature and low oxygen partial pressure, the most stable surface adsorbates are Ba–O species with compositions in the range of Ba 0.125 O–Ba 0.25 O per surface W atom, with O passivating all dangling W bonds and Ba creating work function-lowering surface dipoles. Wulff construction analysis reveals that the presence of O and Ba significantly alters the surface energetics and changes the proportions of surface facets present under equilibrium conditions. In conclusion, analysis of previously published data on W sintering kinetics suggests that fine W particles in the size range of 100-500 nm may be at or near equilibrium during cathode synthesis and thus may exhibit surface orientation fractions well described by the calculated Wulff construction.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Stretching Epitaxial La 0.6 Sr 0.4 CoO 3–δ for Fast Oxygen Reduction

The slow kinetics of the oxygen reduction reaction (ORR) is one of the key challenges in developing high performance energy devices, such as solid oxide fuel cells. Straining a film by growing on a lattice-mismatched substrate has been a conventional approach to enhance the ORR activity. However, due to the limited choice of electrolyte substrates to alter the degree of strain, a systematic study in various materials has been a challenge. Here, we explore the strain modulation of the ORR kinetics by growing epitaxial La 0.6 Sr 0.4 CoO 3-δ (LSCO) films on yttria-stabilized zirconia substrates with the film thickness below and above the critical thickness for strain relaxation. Two orders of magnitude higher ORR kinetics is achieved in an ultrathin film with ~0.8% tensile strain as compared to unstrained films. Time-of-flight secondary ion mass spectrometry depth profiling confirms that the Sr surface segregation is not responsible for the enhanced ORR in strained films. Here, we attribute this enhancement of ORR kinetics to the increase in oxygen vacancy concentration in the tensile-strained LSCO film owing to the reduced activation barrier for oxygen surface exchange kinetics. Density functional theory calculations reveal an upshift of the oxygen 2p-band center relative to the Fermi level by tensile strain, indicating the origin of the enhanced ORR kinetics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Polarity-driven oxygen vacancy formation in ultrathin LaNiO 3 films on SrTiO 3

Oxide heterostructures offer a pathway to control emergent phases in complex oxides, but their creation often leads to boundaries that have a polar discontinuity. In order to fabricate atomic-scale arrangements of dissimilar materials, we need a clear understanding of the pathways by which materials resolve polarity issues. By examining the real-time lattice structure in-situ during growth for the case of polar LaNiO 3 synthesized on non-polar SrTiO 3 (001), we demonstrate how films in ultra-thin limit form as LaNiO 2.5 and then evolve into LaNiO 3 as the thickness increases. Theory explains how the polar energetics drives the formation of oxygen vacancies and the stability of these phases with thickness and structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2017

Density-Functional-Theory Modeling of Cation Diffusion in Bulk La 1 - x Sr x MnO 3 ± δ ( x = 0.0 – 0.25 ) for Solid-Oxide Fuel-Cell Cathodes

In this work, the A - and B -site cation migration pathways involving defect complexes in bulk La 1-x Sr x MnO 3±δ (LSM) at x = 0.0-0.25 are investigated based on density-functional-theory modeling for solid-oxide fuel-cell (SOFC) cathode applications. We propose a dominant A -site cation migration mechanism which involves an A -site cation (e.g., La$x\atop{A}$) V A "' of a V A "' -V B "' cluster, where La$x\atop{A}$, V A "' and V B "' are La 3+ , A-site vacancy, and B-site vacancy in bulk LSM, respectively, and V A "' -V B "' is the first nearest-neighbor V A "' and V B "' pair. This hop exhibits an approximately 1.6-eV migration barrier as compared to approximately 2.9 eV of the La$x\atop{A}$ hop into a V A "'. This decrease in the cation migration barrier is attributed to the presence of the V B "' relieving the electrostatic repulsion and steric constraints to the migrating A-site cations in the transition-state image configurations.

03 NATURAL GAS↗
DOE OSTI2017

Thermodynamic and kinetic modeling of Mn-Ni-Si precipitates in low-Cu reactor pressure vessel steels

Formation of large volume fractions of Mn-Ni-Si precipitates (MNSPs) causes excess irradiation embrittlement of reactor pressure vessel (RPV) steels at high, extended-life fluences. Thus, a new and unique, semi-empirical cluster dynamics model was developed to study the evolution of MNSPs in low-Cu RPV steels. The model is based on CALPHAD thermodynamics and radiation enhanced diffusion kinetics. The thermodynamics dictates the compositional and temperature dependence of the free energy reductions that drive precipitation. The model treats both homogeneous and heterogeneous nucleation, where the latter occurs on cascade damage, like dislocation loops. The model has only four adjustable parameters that were fit to an atom probe tomography (APT) database. The model predictions are in semi-quantitative agreement with systematic Mn, Ni and Si composition variations in alloys characterized by APT, including a sensitivity to local tip-to-tip variations even in the same steel. The model predicts that heterogeneous nucleation plays a critical role in MNSP formation in lower alloy Ni contents. Single variable assessments of compositional effects show that Ni plays a dominant role, while even small variations in irradiation temperature can have a large effect on the MNSP evolution. Within typical RPV steel ranges, Mn and Si have smaller effects. Furthermore, the delayed but then rapid growth of MNSPs to large volume fractions at high fluence is well predicted by the model. For purposes of illustration, the effect of MNSPs on transition temperature shifts are presented based on well-established microstructure-property and property-property models.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Stability of ferrous-iron-rich bridgmanite under reducing midmantle conditions

Our current understanding of the electronic state of iron in lower-mantle minerals leads to a considerable disagreement in bulk sound speed with seismic measurements if the lower mantle has the same composition as the upper mantle (pyrolite). In the modeling studies, the content and oxidation state of Fe in the minerals have been assumed to be constant throughout the lower mantle. Here, we report high-pressure experimental results in which Fe becomes dominantly Fe 2+ in bridgmanite synthesized at 40–70 GPa and 2,000 K, while it is in mixed oxidation state (Fe 3+ /ΣFe = 60%) in the samples synthesized below and above the pressure range. Little Fe 3+ in bridgmanite combined with the strong partitioning of Fe 2+ into ferropericlase will alter the Fe content for these minerals at 1,100- to 1,700-km depths. Further, our calculations show that the change in iron content harmonizes the bulk sound speed of pyrolite with the seismic values in this region. Our experiments support no significant changes in bulk composition for most of the mantle, but possible changes in physical properties and processes (such as viscosity and mantle flow patterns) in the midmantle.

58 GEOSCIENCES↗