Search NASA⌕ Search

Engineering topics

Xu, Cong

Publications and source records attributed to Xu, Cong.

At least 19 records

Characterizing the Self-Assembly Properties of Monoolein Lipid Isosteres

Living cells feature lipid compartments which exhibit a variety of shapes and structures that assist essential cellular processes. Many natural cell compartments frequently adopt convoluted nonlamellar lipid architectures that facilitate specific biological reactions. Improved methods for controlling the structural organization of artificial model membranes would facilitate investigations into how membrane morphology affects biological functions. Monoolein (MO) is a single-chain amphiphile which forms nonlamellar lipid phases in aqueous solution and has wide applications in nanomaterial development, the food industry, drug delivery, and protein crystallization. However, even if MO has been extensively studied, simple isosteres of MO, while readily accessible, have seen limited characterization. An improved understanding of how relatively minor changes in lipid chemical structure affect self assembly and membrane topology could instruct the construction of artificial cells and organelles for modeling biological structures and facilitate nanomaterial-based applications. Here, we investigate the differences in self-assembly and large-scale organization between MO and two MO lipid isosteres. We show that replacing the ester linkage between the hydrophilic headgroup and hydrophobic hydrocarbon chain with a thioesther or amide functional group results in the assembly of lipid structures with different phases not resembling those formed by MO. Using light and cryo-electron microscopy, small-angle X-ray scattering, and infrared spectroscopy, we demonstrate differences in the molecular ordering and large-scale architectures of the self-assembled structures made from MO and its isosteric analogues. These results improve our understanding of the molecular underpinnings of lipid mesophase assembly and may facilitate the development of MO-based materials for biomedicine and as model lipid compartments.

60 APPLIED LIFE SCIENCES↗

Change-point Detection and Image Segmentation for Time Series of Astrophysical Images

Many astrophysical phenomena are time-varying, in the sense that their intensity, energy spectrum, and/or the spatial distribution of the emission suddenly change. This paper develops a method for modeling a time series of images. Under the assumption that the arrival times of the photons follow a Poisson process, the data are binned into 4D grids of voxels (time, energy band, and x-y coordinates), and viewed as a time series of non-homogeneous Poisson images. The method assumes that at each time point, the corresponding multiband image stack is an unknown 3D piecewise constant function including Poisson noise. It also assumes that all image stacks between any two adjacent change points (in time domain) share the same unknown piecewise constant function. The proposed method is designed to estimate the number and the locations of all of the change points (in time domain), as well as all of the unknown piecewise constant functions between any pairs of the change points. The method applies the minimum description length principle to perform this task. A practical algorithm is also developed to solve the corresponding complicated optimization problem. Simulation experiments and applications to real data sets show that the proposed method enjoys very promising empirical properties. Applications to two real data sets, the XMM observation of a flaring star and an emerging solar coronal loop, illustrate the usage of the proposed method and the scientific insight gained from it.

79 ASTRONOMY AND ASTROPHYSICS↗

Adaptive multi-level checkpointing

In some examples, with respect to adaptive multi-level checkpointing, a transfer parameter associated with transfer of checkpoint data from a node-local storage to a parallel file system may be ascertained for the checkpoint data stored in the node-local storage. The transfer parameter may be compared to a specified transfer parameter threshold. A determination may be made, based on the comparison of the transfer parameter to the specified transfer parameter threshold, as to whether to transfer the checkpoint data from the node-local storage to the parallel file system.

97 MATHEMATICS AND COMPUTING↗

Single-entity electrochemistry at confined sensing interfaces

Measurements at the single-entity level provide more precise diagnosis and understanding of basic biological and chemical processes. Recent advances in the chemical measurement provide a means for ultra-sensitive analysis. Confining the single analyte and electrons near the sensing interface can greatly enhance the sensitivity and selectivity. In this work, we summarize the recent progress in single-entity electrochemistry of single molecules, single particles, single cells and even brain analysis. The benefits of confining these entities to a compatible size sensing interface are exemplified. Finally, the opportunities and challenges of single entity electrochemistry are addressed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DXT: Darshan eXtended Tracing

As modern supercomputers evolve to exascale, their I/O subsystems are becoming increasingly complex, making optimization of I/O for scientific applications a daunting task. Although I/O profiling tools facilitate the process of optimizing application I/O performance, legacy profiling tools lack flexibility in their level of detail and ability to correlate traces with other sources of data. Additionally, a lack of robust trace analysis tools makes it difficult to derive actionable insights from large-scale I/O traces. Darshan is an HPC I/O characterization tool that records statistics in a lightweight manner that makes it appropriate for full-time production deployment. However, Darshan’s default characterization mechanism records information at a fixed granularity. We augment Darshan by proposing Darshan eXtended Tracing (DXT) for more detailed profiling of I/O software stacks. DXT enables users and administrators to vary the level of fidelity captured by Darshan at run time without modifying or recompiling applications. This capability facilitates systematic analysis on the I/O behavior of applications and can provide useful application kernel I/O traces to help advance parallel I/O research. We have demonstrated the power of DXT by obtaining a wide range of useful statistics for multiple case studies, and we further show that DXT is able to do so same with negligible overhead.

97 MATHEMATICS AND COMPUTING↗

Encoding data within a crossbar memory array

In an example, in a method for encoding data within a crossbar memory array containing cells, bits of input data may be received. The received bits of data may be mapped to the cells in a row of the memory array, in which the cells are to be assigned to one of a low resistance state and a high resistance state. A subset of the mapped bits in the row may be grouped into a word pattern. The word pattern may be arranged such that more low resistance states are mapped to cells that are located closer to a voltage source of the row of the memory array than to cells that are located farther away from the voltage source.

Muralimanohar, Naveen↗

Effects of Sr, Ce and P on the microstructure and mechanical properties of rapidly solidified Al7Si alloys

Highlights: • Rapid solidification caused formation of nanoscaled Si particle chains. • Sr or Ce induced the columnar transition zone only at extremely high cooling rate. • Enhancement of hardness is attributed to fine dispersion of eutectic Si, grain refinement and the supersaturation of Si. • Sr or Ce caused further enhancement of hardness, attributing to Si modification. - Abstract: A series of Al7Si based alloys with trace addition of Sr, Ce or P were prepared using melt-spinning at two different high cooling rates, and the microstructure as well as the hardness of the ribbons was comprehensively studied. The results show that Sr or Ce induces the formation of columnar transition zone and modifies the morphology of eutectic Si phase from dispersed particle chains to fine fibers only at extremely high cooling rate. However, P has little effect on the microstructure of either α-Al or eutectic Si. Compared with conventional casting, the Al7Si ribbons exhibit extremely high hardness due to the fine dispersion of eutectic Si, the grain refinement and the supersaturation of Si. The hardness is further enhanced by Sr or Ce addition at extremely high cooling rate, especially for columnar and equiaxed zones, attributing to the modification effect on Si phase.

36 MATERIALS SCIENCE↗

Abnormal Pressure-Induced Photoluminescence Enhancement and Phase Decomposition in Pyrochlore La 2 Sn 2 O 7

La 2 Sn 2 O 7 is a transparent conducting oxide (TCO) material and shows a strong near-infrared fluorescent at ambient pressure and room temperature. By in situ high-pressure research, pressure-induced visible photoluminescence (PL) above 2 GPa near 2 eV is observed. The emergence of unusual visible PL behavior is associated with the seriously trigonal lattice distortion of the SnO 6 octehedra, under which the Sn–O1–Sn exchange angle θ is decreased below 22.1 GPa, thus enhancing the PL quantum yield leading to Sn 3 P 1 → 1 S 0 photons transition. Besides, bandgap closing followed by bandgap opening and the visible PL appearing at the point of the gap reversal, which is consistent with high-pressure phase decomposition, are discovered. The high-pressure PL results demonstrate a well-defined pressure window (7–17 GPa) with flat maximum PL yielding and sharp edges at both ends, which may provide a great calibration tool for pressure sensors for operation in the deep sea or at extreme conditions.

36 MATERIALS SCIENCE↗

The effect of scandium addition on microstructure and mechanical properties of Al–Si–Mg alloy: A multi-refinement modifier

Effect of scandium (Sc) additions on the microstructure, mechanical properties and fracture behavior of Al–Si–Mg casting alloy (F357) were systematically investigated. It was found that Sc addition caused a multi-refining efficiency on the microstructure of as-cast F357 alloy, including refinement of grains and secondary dendrite arm spacing (SDAS), modification of eutectic Si and harmless disposal of β-Al{sub 5}FeSi phase. Subsequent T6 heat treatment had further induced the complete spheroidization of eutectic Si and precipitation of fine secondary Al{sub 3}Sc dispersoids in the Sc modified alloys. Thus the mechanical properties, especially the ductility, were significantly enhanced by the addition of Sc combined with the heat treatment. The highest ultimate tensile strength, yield strength and elongation were achieved in 0.8 wt.% Sc modified F357 alloy combined with T6 heat treatment. Furthermore, fractographic examinations indicated that the ductile fracture mechanism served as a dominate role in the modified alloys due to the formation of fine, deep and uniformly distributed dimples. - Highlights: • Detailed characterization of the multi-refining microstructure of Sc modified F357 alloy was performed. • The multi-refinement was proposed to refine grain and SDAS, modify eutectic Si and β-phase. • Sc modifier combined with T6 treatment is effective in improving tensile properties. • Modification of eutectic Si in F357 alloy with Sc is consistent with the IIT mechanism.

36 MATERIALS SCIENCE↗

Profiling and Improving I/O Performance of a Large-Scale Climate Scientific Application

Exascale computing systems are soon to emerge, which will pose great challenges on the huge gap between computing and I/O performance. Many large-scale scientific applications play an important role in our daily life. The huge amounts of data generated by such applications require highly parallel and efficient I/O management policies. In this paper, we adopt a mission-critical scientific application, GEOS-5, as a case to profile and analyze the communication and I/O issues that are preventing applications from fully utilizing the underlying parallel storage systems. Through in-detail architectural and experimental characterization, we observe that current legacy I/O schemes incur significant network communication overheads and are unable to fully parallelize the data access, thus degrading applications' I/O performance and scalability. To address these inefficiencies, we redesign its I/O framework along with a set of parallel I/O techniques to achieve high scalability and performance. Evaluation results on the NASA discover cluster show that our optimization of GEOS-5 with ADIOS has led to significant performance improvements compared to the original GEOS-5 implementation.

Exascale↗

SLOAVx: Scalable LOgarithmic AlltoallV Algorithm for Hierarchical Multicore Systems

Scientific applications use collective communication operations in Message Passing Interface (MPI) for global synchronization and data exchanges. Alltoall and AlltoallV are two important collective operations. They are used by MPI jobs to exchange messages among all of MPI processes. AlltoallV is a generalization of Alltoall, supporting messages of varying sizes. However, the existing MPI AlltoallV implementation has linear complexity, i.e., each process has to send messages to all other processes in the job. Such linear complexity can result in sub optimal scalability of MPI applications when they are deployed on millions of cores. To address above challenge, in this paper, we introduce a new Scalable LOgarithmic AlltoallV algorithm, named SLOAV, for MPI AlltoallV collective operation. SLOAV aims to achieve global exchange of small messages of different sizes in a logarithmic number of rounds. Furthermore, given the prevalence of multicore systems with shared memory, we design a hierarchical AlltoallV algorithm based on SLOAV by leveraging the advantages of shared memory, which is referred to as SLOAVx. Compared to SLOAV, SLOAVx significantly reduces the inter-node communication, thus improving the entire system performance and mitigating the impact of message latency. We have implemented and embedded both algorithms in Open MPI. Our evaluation on large-scale computer systems shows that for the 8-byte and 1024-process MPI Alltoallv operation, the SLOAV can reduce the latency by as much as 86.4%, when compared to the state-of-the-art, and SLOAVx can further optimize the SLOAV by up to 83.1% in terms of message latency on multicore systems. In addition, experiments with NAS Parallel Benchmark (NPB) demonstrate that our algorithms are very effective for real-world applications.

Computer Science↗

IRAS colors within M31: Evidence for deficiency of very small grains?

Significant differences are found in the IRAS color-color diagrams of small regions (2 min x 2 min, or 0.4 x 1.8 kpc) within the disk of M31 compared to Galactic cirrus, most noticeably demonstrated by a trend of low 60 to 100 micrometer surface brightness ratio and high 12 to 25 micrometer ratio. Based on physical arguments, we conclude that these color differences are best explained by assuming that 'very small grains' (VSG; but not polycylic aromatic hydrocarbons) are only half as abundant in M31 as they are in Galactic cirrus. We confirm this conclusion and test its detailed agreement with data by using the phenomenological model of Desert et al. (1990). In particular, we show that the data cannot be explained by postulating weaker UV heating in the disk of M31. We also show that the VSG-deficient model predicts correctly the correspondence between the IRAS colors and the 100 micrometer emissivity per H I atom in the outer disk of M31. 'Very small grains' are a leading candidate for the carrier of the 2175 A bump in the extinction curve. Our suggested VSG deficiency in M31 is thus consistent with recent Hubble Space Telescope (HST) observations which show evidence for a weaker and narrower 2175 A bump on the M31 extinction curve. Some speculation is offered as to possible links between very small grains and the low rate of current star formation in M31.

Xu, Cong↗

Far-Infrared sources and diffuse emission in M31

A study on the far-infrared (FIR) emission of M31 has been carried out with the High Resolution (HiRes) maps (approx. 1 min) derived from IRAS data. Sixty-eight FIR sources are detected in M31, which in general coincide with optical HII regions, and contribute 15, 23, 29, and 23 percent to the fluxes in 12, 25, 60, and 100 micron bands, respectively. The remaining diffuse emission, which dominates the FIR emission of M31, is studied using a dust heating model which utilizes the UV and optical photometry maps and the HI maps available in the literature. It is found that the global dust-to-gas ratio in M31 disk is 6.5 10(exp -3), very close to the dust-to-gas ratio in the solar neighborhood. There is a significant galactocentric gradient of the dust-to-HI-gas ratio, with an e-folding scale length of 9 kpc. The diffuse dust correlates tightly with the HI gas. The model indicates that the non-ionizing UV (913-4000A) radiation from massive and intermediate massive stars contributes only about 30 percent of the heating of the diffuse dust, while the optical-NIR (4000-9000A) radiation from the old stellar population is responsible for the most of the heating.

Xu, Cong↗