Search NASA⌕ Search

DOE OSTI · 21036811

Reverse combustion: Kinetically controlled and mass transfer controlled conversion front structures

Abstract

Under most conditions for reverse fixed bed combustion, transport effects of heat and gaseous species to and within fuel bed particles are important phenomena that limit the conversion rate. At present there is only one model that (1) claims to take transport limitations into account and (2) for which analytical solutions are given. Here, we present a numerical study of reverse combustion analysis on the basis of this model to show the effect of transport limitations on the reaction front structure and the consequences of these effects for the applicability and accuracy of the analytical solution procedure. A parameter set for coal combustion was used to perform the study. Results of numerical simulations indicate that the model solutions contain two limiting cases: kinetically controlled and mass-transfer-controlled conversion front structures. The kinetically controlled solutions consist of a preheat zone at the upstream side of the front and a thin reaction zone at the downstream side. The mass-transfer-controlled solutions consist of a wide reaction zone with a maximum source term situated at the upstream part of the front. The analytical solution to the model equations is shown to give correct predictions in the kinetically controlled case only. In the presence of mass transfer, the solution predicts the trend of decreasing front velocity with increasing transport limitations correctly but does not show the correct functional dependence on the parameter describing transport limitations. In addition, the predictions become highly inaccurate. This is related to the fact that the effect of transport limitations is not accounted for in the analytical solution method. Therefore, numerical methods should be used to obtain generally valid solutions. (author)

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

van Kuijk, Hans, van Oijen, Jeroen, Bastiaans, Rob, de Goey, Philip. 2008-05-15. Reverse combustion: Kinetically controlled and mass transfer controlled conversion front structures. https://doi.org/10.1016/j.combustflame.2008.02.002. https://searchnasa.com/record/osti%3A21036811/reverse-combustion-kinetically-controlled-and-mass-transfer-controlled-conversion-front-structures

Citations retain the original authors and DOI and include this site’s record URL. If this discovery service contributed to your research, you can also cite Search NASA by Indiciae: BibTeX · RIS.

KEEP EXPLORING

Related reports

Wyoming Trails Carbon Hub (WyoTCH)

The Wyoming Trails Carbon Hub (WyoTCH) project completed a front-end engineering and design (FEED) study for a commercial-scale, open-access carbon dioxide (CO 2 ) transport pipeline in Wyoming under U.S. Department of Energy (DOE) Award DEFE0032347, funded through the Bipartisan Infrastructure Law Carbon Capture Technology Program and administered by the National Energy Technology Laboratory. The project’s approach of designing a multi-source, multi-destination pipeline, rather than a dedicated line serving a single project, would lower the barrier to entry for individual CO 2 projects. The projects would leverage Wyoming's concentrated industrial and power generation CO 2 sources, its existing CO 2 pipeline infrastructure, and its extensive CO 2 storage and utilization capacity. This is the project's final technical report.

01 COAL, LIGNITE, AND PEAT↗

Engineering-Scale Validation of Novel Algae CO 2 Capture and Bioproducts Technology

The purpose of this project was to advance and scale the algae-based technology Helios-NRG has been developing for capture of CO 2 from the flue gas of coal-burning power plants with conversion of the CO 2 to high-value products. In order to encourage the process becoming commercial and be adoptable, it is essential that the cost of CO 2 be close to net zero or slightly revenue positive. Two methods to achieve this are reducing the cost of operations through efficiencies and selling of products derived from conversion. Helios and the project team partners have accomplished the goals of furthering the technology to be more scalable and substantially lower cost with a defined pathway for commercialization.

01 COAL, LIGNITE, AND PEAT↗

Innovative Biomonitoring and Remediation of Heavy Metals Using Phytotechnologies at the Savannah River Site (SRS) Coal Combustion Product (CCP) Impoundment Sites

The Savannah River Site (SRS) contains legacy coal combustion product (CCP) impoundments that are impacted by elevated concentrations of heavy metals and radionuclides, posing long-term risks to soil health, ecosystem functioning, and environmental sustainability. Traditional environmental monitoring approaches rely primarily on chemical analyses to quantify contaminant concentrations but often provide limited information regarding biological responses or ecosystem recovery. This project addressed these limitations by integrating environmental chemistry, microbial ecology, artificial intelligence (AI), and bioremediation into a comprehensive framework for environmental diagnostics and restoration of contaminated soils. The overarching goal of this collaborative project between Florida A&M University (FAMU) and the University of Georgia's Savannah River Ecology Laboratory (SREL) was to develop innovative biomonitoring and remediation strategies for heavy metal-contaminated CCP impoundment sites at the Savannah River Site. Specifically, the project sought to (i) characterize heavy metal contamination, (ii) determine microbial responses to contamination, (iii) isolate indigenous heavy metal-resistant microorganisms for remediation applications, (iv) develop a microbial ecological health index using machine learning, and (v) optimize fungal-mediated bioremediation using artificial intelligence.

01 COAL, LIGNITE, AND PEAT↗