Search NASA⌕ Search

SEARCH · Search NASA

Results for “MM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Very long baseline interferometry at a wavelength of 3.4 mm

The first detection of interference fringes by VLBI at a wavelength of 3.4 mm during observations of 3C84 are reported. The compact source in the nucleus of 3C84 was observed for a 9-hr period on the 485 km baseline between the Owens Valley Radio Observatory and the Hat Creek Observatory. The fringe data are given and the derivation of the correlated flux densities is described. The findings are discused in the context of previous obervations. The results demonstrate that there are no unforeseen technical difficulties associated with millimeter VLBI, and that the sensitivity of existing systems is sufficient to observe objects brighter than a few Jy. The observations are consistent with the millimeter wavelength radio structure of 3C84 being more compact than its centimeter wavelength structure.

Readhead, A. C. S.↗

A new class of solar burst with MM-wave emission but only at the highest frequency (90 GHz)

High sensitivity and high time resolution solar observations at 90 GHz (lambda = 3.3 mm) have identified a unique impulsive burst on May 21, 1984 with emission that was more intense at this frequency than at lower frequencies. The first major time structure of the burst was over 10 times more intense at 90 GHz than at 30 GHz, 7 GHz, or 2.8 GHz.Only 6 seconds later, the 30 GHz impulsive structures started to be observed but still with lower intensity than at 90 GHz. Hard X-ray time structures at energies above 25 keV were almost identical to the 90 GHZ structures (to better than one second). All 90 GHz major time structures consisted of trains of multiple subsecond pulses with rise times as short as 0.03 sec and amplitudes large compared to the mean flux. When detectable, the 30 GHz subsecond pulses had smaller relative amplitude and were in phase with the corresponding 90 GHz pulses.

Kaufmann, P.↗

Saturn's rings - 3-mm low-inclination observations and derived properties

To determine a more precise brightness temperature and more accurate properties for Saturn's rings, 3.3 mm low inclination observations have been made at 90 GHz with the Aerospace 4.6 m radio telescope. A mean brightness temperature of 17 plus or minus 4 K has been determined by comparing the data with the variation of the inclination of the total flux from the planet and rings predicted by a simple model with uniformly bright A and B rings. Variation of the normal optical depth from 0.4 to 1.0 resulted in a total variation of about 1.5 K in A and B brightness. A portion of the brightness attributed to ring particle thermal emission has been determined to be at a temperature of 11 plus or minus 5 K. If the maximum particle radius (approximately 5 m) deduced from Voyager bistatic radar observations is correct, results indicate a particle distribution ranging between 1 cm and several meters radius of the form r exp -s with s = 3.3-3.6, or a material absorption coefficient ranging between 3 and 10 times lower than that of pure water ice at 85 K, or both. An increase in the porosity of the ice particles through a decrease in their density will not produce the observed particle albedo. If the rocky material is uniformly distributed, low ring brightness temperature would allow a silicate upper limit of approximately 10 percent by mass; however, the silicate material could be more abundant if it is separated from the icy material.

Epstein, E. E.↗

Planetary observations at a wavelength of 1.32 mm

Observations at a wavelength of 1.32 mm have been made of the Jovian planets, Ceres, the satellites Callisto and Ganymede, and the HII region DR 21. The observed brightness temperatures are presented. Those of the Jovian planets agree with the values expected from model atmosphere calculations, except that of Jupiter, which is lower than expected. Ceres and the satellites do not have atmospheres so their emission arised in their subsurface layers. The observed brightness temperatures are intermediate between those measured at infrared and centimeter wavelengths.

Ulich, B. L.↗

Multifrequency observations of blazars. II - The variability of the 1 micron to 2 mm continuum

The results of monitoring, over a period of two years, a sample of 12 blazars, in 11 wave bands between 1 micron and 2 mm are presented. All sources exhibit some variability, both in flux density and spectral shape. The infrared variability is consistent with repeated injections of reaccelerations of electrons, which subsequently suffer radiative losses. For OJ 287, 3C 279, and 3C 345, a decay and steepening of the infrared spectrum occurred as the submillimeter turnover evolved to lower frequencies, consistent with expansion of the emitting region. The peak flux, however, increased during this evolution. This behavior is inconsistent with most models for compact extragalactic sources, but it is naturally explained by shock waves traveling in an adiabatically expanding relativistic jet (Marscher and Gear, 1985).

Gear, W. K.↗

Nitrous oxide in the tropical middle atmosphere, observed by ground-based mm-wave spectrometry

Measurements of stratospheric N2O were made from Mauna Kea in Hawaii in June 1983, and in May and June 1986, by observing thermal emission of the molecule in a rotational transition at about 1 mm wavelength. Analyses of the data yield altitude profiles in the middle and upper stratosphere. Useful measurements of N2O may be made in one to two hours. The N2O profiles agree reasonably well with model predictions and with published satellite data, though significantly more N2O is reported near the stratopause than shown by the satellite measurement, and significantly more N2O in the middle stratosphere than in one of the models. The discrepancy between these data and the satellite measurement may be due in part to variations induced by the solar cycle.

Connor, Brian J.↗

mm-wave observations of stratospheric HCN at tropical latitudes

Middle and upper stratospheric HCN has been measured using ground-based mm-wave emission spectroscopy during a series of observations made in Mauna Kea, HI, in June 1986. A volume mixing ratio of 190 + or - 40 pptv at about 40 km, and a decrease of concentration with altitude that is considerably slower than that predicted by current models are found. This could be an indication of an atmospheric source of HCN as yet unidentified.

Jaramillo, M.↗

Expanding the utility of manned observations of earth - 70 mm film tests on the Space Shuttle

The Space Shuttle Orbiter provides opportunities for testing different ways to record terrestrial scenes using film. Such opportunities are limited by launch schedules and orbital parameters, properties of the Orbiter windows, available astronaut time and equipment stowage, and the necessity for safety qualification of equipment. To date, astronauts have accomplished several successful tests using color-infrared film, plane-polarizing filters, and a faster color emulsion, both on single 70-mm cameras and using a dual camera mount.

Amsbury, David L.↗

The Apollo 15 coarse fines (4-10 mm)

A new catalog of the Apollo 15 coarse fines particles is presented. Powell's macroscopic descriptions, resulting from his 1972 particle by particle binocular examination of all of the Apollo 15 4 to 10 mm fines samples, are retained. His groupings are also retained, but petrographic, chemical, and other data from later analyses are incorporated into this catalog to better characterize individual particles and describe the groups. A large number of particles have no characterization beyond that done by Powell. Complete descriptions of the particles and all known references are provided. The catalog is intended for anyone interested in the rock types collected by Dave Scott and Jim Irwin in the Hadley-Appenine region, and particularly for researchers requiring sample allocations.

Ryder, Graham↗

Laboratory measurements of the 7.5-9.38-mm absorption of gaseous ammonia (NH3) under simulated Jovian conditions

An attempt is made to infer the abundance and distribution of ammonia from RF emission measurements more accurately than heretofore, on the basis of the results of laboratory measurements for the mm-wave opacity of gaseous ammonia under simulated Jovian atmosphere conditions. The measurements were conducted at various frequencies in the 32-40 GHz range at 2 atm and 203 K; the atmospheric mixture was 88.34 percent H2, 9.81 percent He, and 1.85 percent NH3. Experimental results are found to be readily modeled by the Gross (1955) line-shape factor, rather than that of Van Vleck and Weisskopf (1945).

Joiner, Joanna↗

EUV efficiency of a 6000-grooves per mm diffraction grating

In order to explore whether grooves ruled mechanically at a density of 6000 per mm can perform well at EUV wavelengths, a sample grating is measured with this density in an EUV calibration facility. Measurements are presented of the planar uniform line-space diffraction grating's efficiency and large-angle scattering.

Hurwitz, Mark↗

Observation of a strong inverse temperature dependence for the opacity of atmospheric water vapor in the mm continuum near 280 GHz

Results are presented of the field measurements of atmospheric opacity at 278 GHz (9.3/cm) conducted at the McMurdo Station (Antarctica) during the austral springs of 1986 and 1987, in conjunction with balloon measurements of water vapor profile and total column density, showing a strong inverse temperature dependence when normalized to precipitable water vapor. The value of measured opacity per mm of precipitable water vapor (PWV) is roughly two times greater at -35 C than at -10 C and three times greater than measurements at +25 C reported by Zammit and Ade (1981). Various theories proposed to explain excess absorption in continuum regions are reviewed.

Emmons, Louisa K.↗

Correlation between some current parameters and optical radiation generated by 280 mm long laboratory sparks

Discussed here is the optical radiation generated by 280 mm long laboratory discharges and its relationship to the current flowing in the discharge channel. In an experiment, the optical radiation generated by the discharges was measured at wavelengths 777nm (bandwidth 10 nm) due to O I(1), and 500 nm (bandwidth 5 nm) due to N II(19), and the broadband optical radiation between the wavelengths 400 to 1100 nm. The shape of the current waveform, which had a rise time of 0.1 microsecond and a decay time of 5 microsecond, remained the same with increasing peak value. The experiment was conducted with peak current amplitudes in the range of 1-4 kA. In order to test the effect of current rise time on the optical radiation, researchers also conducted studies with a current waveform having a 5 microsecond rise time. It was observed that the peak amplitude of the optical radiation pulse at the wavelengths mentioned above is proportional to the peak amplitude of the current flowing through the discharge channel. The rise time of the optical radiation pulse at a given wavelength does not depend significantly on the peak amplitude of the current waveform. The rise time of the optical radiation pulse decreases with decreasing wavelength. A slight increase in the decay time of the optical pulse, at a given wavelength, is observed with increasing peak amplitude of the current waveform.The results show that the rise time of the optical radiation pulse increases with the increasing rise time of the current waveform. The relationship between peak current, peak optical power, and peak electrical power is studied. Also, the relationship between peak current, optical energy (400-1100 and 777 nm), and electrical energy is discussed.

Windmar, Dan↗

CFIE MM solution for TE and TM incidence on a 2-D conducting body with dielectric filled cavity

The problem of determining the scattering cross section of an arbitrarily shaped two-dimensional conducting body with an arbitrarily shaped dielectric-filled cavity is considered. The problem is solved using a method-of-moments (MM) solution for the combined field integral equations (CFIE). The particular form of the method of moments solution used has here uses a minimum number of expansion coefficients. Results are given for TE and TM incident waves.

Goggans, Paul M.↗

Observations of Mars, Uranus, Neptune, Io, Europa, Ganymede, and Callisto at a wavelength of 2.66 mm

An accurate thermal model of Mars is presently used as a calibrator for 2.66-mm brightness temperature observations of Uranus, Neptune, and the Galilean satellites. While the measurements for Io, Europa, and Callisto, are consistent with thermal models of the lunar type, Ganymede is found to be anomalous. It appears that the near surface of Ganymede differs from that of the other satellites in some unknown fashion, perhaps by scattering more strongly at short wavelengths.

Muhleman, Duane O.↗

New materials and techniques for improved mm wave devices

Current research on microwave and mm wave three terminal semiconductor devices is summarized with particular attention given to the development of the pseudomorphic InGaAs modulation-doped field effect transistor (MODFET). Application of the high-indium-concentration MODFET grown on InP in the temperature range of 120-150 K is also described.

Alterovitz, Samuel A.↗

Goddard Space Flight Center specification for Helical-Scan 8-millimeter (mm) magnetic digital data tape cartridge

The same kind of standard and controls are established that are currently in use for the procurement of new analog, digital, and IBM/IBM compatible 3480 tape cartridges, and 1 in wide channel video magnetic tapes. The Magnetic Tape Certification Facility (MTCF) maintains a Qualified Products List (QPL) for the procurement of new magnetic media and uses the following specifications for the QPL and Acceptance Tests: (1) NASA TM-79724 is used for the QPL and Acceptance Testing of new analog magnetic tapes; (2) NASA TM-80599 is used for the QPL and Acceptance Testing of new digital magnetic tapes; (3) NASA TM-100702 is used for the QPL and Acceptance Testing of new IBM/IBM compatible 3840 magnetic tape cartridges; and (4) NASA TM-100712 is used for the QPL and Acceptance Testing of new 1 in wide channel video magnetic tapes. This document will be used for the QPL and Acceptance Testing of new Helical Scan 8 mm digital data tape cartridges.

Perry, Jimmy L.↗

Test methods for optical disk media characteristics (for 356 mm ruggedized magneto-optic media)

Standard test methods for computer storage media characteristics are essential and allow for conformance to media interchange standards. The test methods were developed for 356 mm two-sided laminated glass substrate with a magneto-optic active layer media technology. These test methods may be used for testing other media types, but in each case their applicability must be evaluated. Test methods are included for a series of different media characteristics, including operational, nonoperational, and storage environments; mechanical and physical characteristics; and substrate, recording layer, and preformat characteristics. Tests for environmental qualification and media lifetimes are also included. The best methods include testing conditions, testing procedures, a description of the testing setup, and the required calibration procedures.

Podio, Fernando L.↗