Search NASA⌕ Search

SEARCH · Search NASA

Results for “cell temperature”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Engineering ligand reactivity enables high-temperature operation of stable perovskite solar cells

Perovskite solar cells (PSCs) consisting of interfacial two- and three-dimensional heterostructures that incorporate ammonium ligand intercalation have enabled rapid progress toward the goal of uniting performance with stability. However, as the field continues to seek ever-higher durability, additional tools that avoid progressive ligand intercalation are needed to minimize degradation at high temperatures. We used ammonium ligands that are nonreactive with the bulk of perovskites and investigated a library that varies ligand molecular structure systematically. Here, we found that fluorinated aniliniums offer interfacial passivation and simultaneously minimize reactivity with perovskites. Using this approach, we report a certified quasi–steady-state power-conversion efficiency of 24.09% for inverted-structure PSCs. In an encapsulated device operating at 85°C and 50% relative humidity, we document a 1560-hour T85 at maximum power point under 1-sun illumination.

14 SOLAR ENERGY↗
DOE OSTI2021

High-pressure synthesis and thermodynamic stability of PdH 1±ε up to 8 GPa

Palladium hydride alloys are superconductors and hydrogen storage materials. One synthesis route is compression of Pd to high pressure in a hydrogen-rich environment. Here we report the evolution of the unit cell volume of PdH x synthesized by compressing Pd in a pure H 2 medium to pressures from 0.2 to 8 GPa in a diamond anvil cell at room temperature. The volume of the face-centered cubic unit cell changes nonmonotonically with pressure, increasing upon compression from 0.2 to 1 GPa and decreasing upon compression from 1 to 8 GPa. Volume is reversible upon decompression and is independent of whether the sample was heated to 600 K at low pressure (P < 2 GPa). The x-ray diffraction data show no evidence for a phase transition between 0.2 and 8 GPa. The volume maximum at 1 GPa must be caused by progressive hydrogenation from 0 to 1 GPa. Assuming a pressure-volume-composition equation of state derived from previously published data, the [H]:[Pd] ratio in this study increases to a maximum value of x = 1 ± 0.02 at 2 ± 0.5 GPa and remains stable upon further compression to and from 8 GPa. These results add to a mounting body of evidence that PdH 1±ϵ is in thermodynamic equilibrium with pure H 2 at room temperature from 2 GPa to at least 8 GPa. Here, the simplest interpretation is that H atoms occupy all octahedral sites and no tetrahedral sites in face-centered cubic PdH 1.0 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Thermoresponsive polymer assemblies via variable temperature liquid-phase transmission electron microscopy and small angle X-ray scattering

Abstract Herein, phase transitions of a class of thermally-responsive polymers, namely a homopolymer, diblock, and triblock copolymer, were studied to gain mechanistic insight into nanoscale assembly dynamics via variable temperature liquid-cell transmission electron microscopy (VT-LCTEM) correlated with variable temperature small angle X-ray scattering (VT-SAXS). We study thermoresponsive poly(diethylene glycol methyl ether methacrylate) (PDEGMA)-based block copolymers and mitigate sample damage by screening electron flux and solvent conditions during LCTEM and by evaluating polymer survival via post-mortem matrix-assisted laser desorption/ionization imaging mass spectrometry (MALDI-IMS). Our multimodal approach, utilizing VT-LCTEM with MS validation and VT-SAXS, is generalizable across polymeric systems and can be used to directly image solvated nanoscale structures and thermally-induced transitions. Our strategy of correlating VT-SAXS with VT-LCTEM provided direct insight into transient nanoscale intermediates formed during the thermally-triggered morphological transformation of a PDEGMA-based triblock. Notably, we observed the temperature-triggered formation and slow relaxation of core-shell particles with complex microphase separation in the core by both VT-SAXS and VT-LCTEM.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Nano-Ceramic Cathodes via Co-sputtering of Gd–Ce Alloy and Lanthanum Strontium Cobaltite for Low-Temperature Thin-Film Solid Oxide Fuel Cells

We report the electrochemical performance and structural characteristics of porous nanostructured ceramic cathodes for thin-film solid oxide fuel cells (TF-SOFCs) based on yttria-stabilized zirconia (YSZ) electrolytes. The nanostructured cathode is obtained through magnetron co-sputtering of gadolinium–cerium (Gd–Ce) alloy and lanthanum strontium cobaltite perovskite targets. The resultant nanostructure and composition of the ceramic cathode are controlled by adjusting the co-sputtering conditions. The peak power densities in our fabricated TF-SOFCs are the highest reported values for YSZ-based electrolyte SOFCs, showing 0.14, 0.48, 1.21, 2.56, and 3.01 W/cm2 at 450, 500, 550, 600, and 650 °C, respectively, operating under air and pure hydrogen fuel. The results show that the porosity and composition of the cathode greatly affect the resulting peak power densities. This work illustrates the capability of sputtering to produce stable, scalable, nano-ceramic cathodes with superb peak power densities when integrated in TF-SOFCs.

25 ENERGY STORAGE↗
DOE OSTI2025

Enhancing surface activity and durability in triple conducting electrode for protonic ceramic electrochemical cells

With the material system operating at lower temperatures, protonic ceramic electrochemical cells (PCECs) can offer high energy efficiency and reliable performance for both power generation and hydrogen production, making them a promising technology for reversible energy cycling. However, PCEC faces technical challenges, particularly regarding electrode activity and durability under high current density operations. To address these challenges, we introduce a nano-architecture oxygen electrode characterized by high porosity and triple conductivity, designed to enhance catalytic activity and interfacial stability through a self-assembly approach, while maintaining scalability. Electrochemical cells incorporating this advanced electrode demonstrate robust performance, achieving a peak power density of 1.50 W cm −2 at 600 °C in fuel cell mode and a current density of 5.04 A cm −2 at 1.60 V in electrolysis mode, with enhanced stability on transient operations and thermal cycles. The underlying mechanisms are closely related to the improved surface activity and mass transfer due to the dual features of the electrode structure. Additionally, the enhanced interfacial bonding between the oxygen electrode and electrolyte contributes to increased durability and thermomechanical integrity. This study underscores the critical importance of optimizing electrode microstructure to achieve a balance between surface activity and durability.

Protonic Ceramic Electrochemical Cells↗
DOE OSTI2025

Fundamental advantages of multijunction thermoradiative cells

Thermoradiative (TR) cells convert heat to work through emission of thermal radiation. Multijunction thermoradiative cells have received little research interest due to the apparent overlap with energy harvesting limits. Through detailed balance formalism, the present study models both single- and multi-diode TR devices, establishing their performance limits and identifying key factors that influence efficiency. For single-junction TR cells, we derive a relationship for the optimal bandgap and show that higher emitter temperatures increase efficiency. When the receiver is at absolute zero temperature, multijunction TR cells have little advantage over the single-junction cell in terms of the maximum output power density. However, for higher receiver temperatures, the multijunction configuration demonstrates significant improvements in both power and efficiency through the optimization of the chemical potential and bandgap of each diode in the complete ensemble. A 500 K emitter and 300 K receiver TR system can achieve a 21.25% increase in efficiency and a 10% improvement in the power density with multijunction architecture compared to a single junction through chemical potential optimization. These findings suggest that multijunction TR cells offer a promising approach to advancing low-grade heat recovery technologies for efficient heat-to-work conversion.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2022

Collective effect of thermal plumes on temperature fluctuations in a closed Rayleigh–Benard convection cell

Here, we report a systematic study of the collective effect of thermal plumes on the probability density function (PDF) P(δT) of temperature fluctuations δT(t) in turbulent Rayleigh-Benard convection. By decomposing δT(t) into four basic fluctuation modes associated with single and multiple warm and cold plumes and a turbulent background, we derive an analytic form of P(δT) based on the convolutions of the five independent modes. To test the derived form of P(δT) in the multiple-plume regions, where the thermal plumes are heavily populated, we conduct time series measurements of temperature fluctuations in two convection cells; one is a vertical thin disk and the other is an upright cylinder of aspect ratio unity. For a given normalized position in most regions of the convection cell, all of the measured PDFs P(δT) for different Rayleigh numbers fall onto a single master curve, once δT is normalized by its rms value σ T . It is found that the measured P(δT / σT ) at different locations along the symmetric horizontal and vertical axes of the convection cells can all be well described by the derived form of P(δT / σT ). The fitted values of the parameters associated with the number of plumes in multiple plume clusters and their relative strengths and degrees of intermittency are closely linked to the spatial distribution of thermal plumes and local dynamics of the large-scale circulation in a closed convection cell. Our work thus provides a unified theoretical approach for understanding scalar PDFs in a turbulent field, which is very useful not only for the present study but also for the study of many turbulent mixing problems of practical interest.

42 ENGINEERING↗
DOE OSTI2026

The MuFusE large-volume diamond anvil cell for exploring muon-catalyzed fusion at higher pressures and temperatures

A new large-volume diamond anvil cell (DAC) has been developed for the Muon-catalyzed Fusion (μCF) Experiment (MuFusE), enabling the compression and heating of deuterium–tritium (d–t) mixtures to pressures and temperatures needed to advance μCF research. The MuFusE DAC achieves the large sample volumes necessary for high-precision fusion measurements while integrating cryogenic loading, all-metal sealing, and flexible bellows to maintain a secure environment during cell compression. Combined with remote pneumatic actuation and secondary containment, the DAC safely managed a 25 Ci tritium inventory while providing a clear optical path for in situ measurements of sample pressure and composition via laser spectroscopy. Utilizing 5 mm diameter diamond anvils oriented in the path of a high-intensity muon beam, the apparatus achieved a stable sample volume of 19.2 mm 3 at liquid density, pressures up to 933 MPa and temperatures up to 400 K—benchmarks that significantly exceed previously reported limits for static d–t targets.

Kalow, J. D. [Acceleron Fusion, Inc., Cambridge, M↗
DOE OSTI2024

Effect of ZnO and PEDOT:PSS charge selective layers on photovoltage of cuprous oxide (Cu 2 O) heterojunction solar cells

Electrochemical deposition (ECD) of Cu 2 O provides a scalable and low temperature pathway to solar cells with a theoretical high energy conversion efficiency of 23%, based on the 2.0–2.2 eV band gap of Cu 2 O. However, existing ECD-Cu 2 O devices are plagued by poor crystallinity and low selectivity of the electron and hole transport layers. Here we use Vibrating Kelvin Probe Surface Photovoltage Spectroscopy (VKP-SPV) to probe the charge transfer selectivity in FTO/ZnO/Cu 2 O/PEDOT:PSS/Ni heterojunction solar cells. Selective electron extraction is achieved at the ZnO back contact to Cu 2 O, as confirmed by a negative surface photovoltage signal. While the uncoated Cu 2 O surface is electron-selective due to the formation of a hole depletion layer, spin coating of a PEDOT:PSS film turns it into a hole-selective interface. After adding nickel metal ink top electrodes, functional 1.0 cm 2 solar cells with power conversion efficiency (PCE) of up to 0.07%, 195 mV open-circuit voltage, and 1.28 mA cm –2 short-circuit photocurrent are achieved. The photovoltaic performance is higher for aluminum doped zinc oxide (AZO) substrates than for fluorine doped tin oxide (FTO) due to the presence of a n-/p-junction that further increases the electron selectivity of the AZO/ZnO/Cu 2 O contacts. Overall, this work demonstrates the first application of PEDOT:PSS as a hole transport layer (HTL) for Cu 2 O and the use of VKP-SPV to measure the photovoltage contributions of the Cu 2 O interfaces. Furthermore, the ability to fabricate Cu 2 O solar cells at near room temperature without the use of vacuum methods or rare elements is an important step towards a scalable Cu 2 O PV technology.

14 SOLAR ENERGY↗
DOE OSTI2023

Proton-Conducting Solid Oxide Electrolysis Cells for Large-scale Hydrogen Production at Intermediate Temperatures

Proton-conducting electrolyte based SOECs offer potential for operation at low to intermediate temperatures. Although yttrium-doped barium zirconate (BZY) and ceria-doped barium zirconate (BCY) have conductivity of 0.01 and 0.017 S.cm -1 respectively at 650C in comparison to the conductivity of 0.015 S.cm -1 for 8-YSZ at 850°C, there remains technology gaps and research needs related to understanding of chemical and structural stability in oxidizing and/or reducing atmospheres at intermediate temperatures, material processing and densification techniques, high polarization losses, and electrode poisoning due to intrinsic and extrinsic gas phase contaminants. Synthesis methods have produced proton-conducting materials and cells that met degradation rate targets, showcasing stable hydrogen production. Improved performance was evident in the HSOEC cell, achieving higher hydrogen production at a lower operating temperature compared to standard cells. Collaborations with multiple research facilities ensured scaling up of synthesis processes and milestone achievements for large-scale manufacturing. Assessment of contaminants revealed their adverse effects on electrode performance and structural stability. Contaminants like Cr and Si compounds, in high humidity, degraded electrodes by forming stable silicate and chromates, inhibiting active surface reactions. Getter materials showed promise in capturing contaminants, suggesting potential for mitigation.

08 HYDROGEN↗
DOE OSTI2025

Ion-Pair Proton Exchange Membrane Fuel Cells for Heavy-duty Transportation

The purpose of this project is to build a fuel cell prototype that demonstrates high temperature proton exchange membrane fuel cell technology (HT PEMFC) commercial readiness. It advances from a technology baseline established in a prior CRADA in which these same Parties collaborated during the years 2020-2024. These efforts are aligned with the intentions of the DOE Hydrogen Fuel Cell Technology Office (HFTO) L’Innovator Pilot Program. Participant observes that its US-based competitive advantage may be improved by further optimizing Laboratory inventions. This CRADA is intended to further improve National Laboratory compositions and to develop commercial HT PEMFC membrane electrode assemblies (MEAs) that perform over a range of operating temperatures and relative humidity, that generate power from both low grade and pure hydrogen, and that are resistant to air impurities. Participant’s goal is to advance the commercial competitiveness of National Laboratory technologies in fuel cell products for heavy-duty truck integrators, for stationary power generation, marine applications, and for emerging interest from commercial aviation. The Parties will collaborate on producing a HT PEMFC MEA that integrates LANL ion pair technology and Brookhaven catalyst technology. The Laboratories plan to research and develop compositions for testing and evaluation. The participant will manufacture multiple MEAs based on the Laboratory compositions and will enable selected customers to validate performance characteristics. The Laboratories will convey to Participant the methods of making the National Laboratory compositions such that Participant may reproduce and then scale Laboratory methods into commercial production. Throughout the project, the Laboratories and Participant will iteratively test and optimize the compositions of materials of the MEAs, intending to optimize characteristics such as power density and lifecycle durability. Participant’s intended customers include fuel cells for large trucks, aviation, power back up, marine, and portable power.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2021

High-T c Superconducting Memory Cell

In this paper, operational principles of a cryogenic memory cell that utilizes high-temperature superconductors (high-T c ) are presented. Such a cell consists of three inductively coupled Josephson junctions coupled via inductors. Design and operational logic of this type of cell were recently introduced and demonstrated for low temperature 4 K environment. The basic memory cell operations (read, write, reset) can be implemented on the same simple circuit and both destructive and non-destructive memory cell operations can be realized. Here, we present the design principles and computational validation of basic memory cell operations (write, read, and reset) for the high-T c memory cell. In conclusion, our results for the high-T c memory cell operations show very good resemblance with the previously presented low-temperature 4 K memory cell operations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Quasi-one-dimensional uniform spin- 1 2 Heisenberg antiferromagnet KNaCuP 2 O 7 probed by P 31 and Na 23 NMR

Here we present the structural and magnetic properties of KNaCuP 2 O 7 investigated via x-ray diffraction, magnetization, specific heat, and P 31 and Na 23 NMR measurements and complementary electronic structure calculations. The temperature-dependent magnetic susceptibility and P 31 NMR shift could be modeled very well by the uniform spin- 1 2 Heisenberg antiferromagnetic chain model with a nearest-neighbor interaction J / k B ≃ 58.7 K . The corresponding mapping using first-principles electronic structure calculations leads to J DFT / k B ≃ 59 K with negligibly small interchain couplings, further confirming that the system is indeed a one-dimensional uniform spin- 1 2 Heisenberg antiferromagnet. The diverging trend of NMR spin-lattice relaxation rates ( 1 / T 1 31 and 1 / T 1 23 ) implies the onset of a magnetic long-range ordering at around T N ≃ 1 K . From the value of T N , the average interchain coupling is estimated to be J ' / k B ≃ 0.28 K . Moreover, the NMR spin-lattice relaxation rates show the dominant contributions from uniform ( q = 0 ) and staggered ( q = ± π / a ) spin fluctuations in the high- and low-temperature regimes, respectively, mimicking one-dimensionality of the spin lattice. We have also demonstrated that 1 / T 1 31 in high temperatures varies linearly with 1 / H , reflecting the effect of spin diffusion on the dynamic susceptibility. The temperature-dependent unit cell volume could be described well using the Debye approximation with a Debye temperature of Θ D ≃ 294 K , consistent with the heat capacity data.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Improved field evaluation of reference cells using spectral measurements

Output from an IMT reference solar cell mounted on a one-axis tracking surface is investigated using spectral measurements covering the 350–1650 nm range for selected days throughout the year. Comparisons are made to a Class-A pyranometer also mounted on the one-axis tracking surface. Systematic biases over the day and year are observed in the ratio of the reference cell’s measurements to reference pyranometer measurements. This systematic bias is associated with the spectral, temperature, and angle-of-incident effects that differ between the reference cell and the reference pyranometer. The comparison is done for selected clear and totally cloudy days to determine the magnitude of the effects and to characterize the influence of these effects on the reference cell measurements. A model to calculate the reference cell output based on spectral irradiance and reference cell temperature is introduced.

14 SOLAR ENERGY↗
DOE OSTI2025

Impact of Advances in Anion Exchange Membranes and Ionomers on Alkaline Fuel Cells

Abstract The operation of low‐temperature electrochemical energy conversion systems (fuel cells, electrolyzers) at high pH values is of perennial interest due to the possibility of moving away from expensive platinum group metal catalysts and reducing cost. Historically, the anion exchange membranes (AEMs) and ionomers have been hampered by performance (ionic conductivity, mechanical strength) and chemical stability issues. In this context, select developments over the past decade in alternate AEM chemistries, water management methods, and production of membrane electrode assemblies (MEAs) that have enabled a significant leap in performance of alkaline fuel cells are examined. These developments are linked to performance improvements in alkaline H 2 /O 2 fuel cells and also consider developments in alkaline fuel cells using nitrogen‐containing fuels (ammonia, hydrazine), carbon‐containing fuels (alcohols, glycols), and boron‐containing fuels (sodium borohydride, ammonia borane). Finally, current challenges and bottlenecks are identified, and potential solutions are proposed.

Chemistry↗
DOE OSTI2021

A channel flow cell with double disk electrodes for oxygen electroreduction study at elevated temperatures and pressures: Theory

We report a new double-disk-electrode channel flow cell has been designed, constructed and tested. A theoretical treatment and implicit finite difference numerical simulations are presented, which permit the computation of the hydrodynamic behavior of this cell under steady state conditions, i.e., the diffusion limited current at the working electrode and the collection efficiency of the detector. The simulated results are consistent with those measured experimentally, indicating that our simulations appropriately describe the hydrodynamic behavior of this cell. The oxygen reduction reaction (ORR) on a carbon-supported nanoparticle Pt catalyst at both room temperature and 110 °C were preliminarily studied with this cell.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗