SEARCH · Search NASA

Results for “Piezoelectric actuators”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

All sources NASA NTRS DOE OSTI

DOE OSTI2022

Validation of the 650 MHz SRF Cavity Tuner for PIP-II at 2 K

The PIP-II linac will include thirty-six β=0.61 and twenty-four β=0.92 650 MHz 5 cell elliptical SRF cavities. Each cavity will be equipped with a tuning system consisting of a double lever slow tuner for coarse frequency tuning and a piezoelectric actuator for fine frequency tuning. One dressed cavity equipped with an SRF tuner has been tested in the horizontal test stand at Fermilab. Results of testing the cavity-tuner system will be presented.

43 PARTICLE ACCELERATORS↗

DOE OSTI2024

Testing of the SSR2 SRF Cavity Tuner for PIP-II at 2 K

The PIP-II linac will include thirty-five 325 MHz Single Spoke Resonators Type 2 (SSR2) cavities. Each cavity will be equipped with a tuner for resonance control. The tuner consists of mechanical frame with a motor for coarse frequency tuning and a piezoelectric actuator for fine frequency tuning. The tuner was tested for the first time at Fermilab on an SSR2 cavity. This dressed cavity-tuner system was tested at the single spoke testing cryo-stat (STC) in Fermilab at 2 K. The tuner performance was evaluated and is presented. Lastly, cavity-tuner mechanical modes were measured via the piezos.

Contreras-Martinez, C.↗

NASA NTRS1974

LST secondary mirror articulation mechanism

The analysis, design, manufacture, test, and delivery of one secondary mirror articulation mechanism for the large space telescope (LST) are reported. The mechanism provides angular freedom about two axes that are perpendicular to the optical axis of the secondary mirror. Motion in each axis is controlled from two sources; one source provides alignment, the other source provides stabilization. Two articulation mechanism configurations were evaluated. In one configuration the stabilization system was assembled with piezoelectric actuators. In the second configuration the stabilization system utilized flexure torque motor actuators. The alignment system was the same for both configurations. System testing confirmed performance that met or exceeded all operational requirements. The two types of stabilization actuators had different performance characteristics. Both types demonstrated position resolution and frequency response better than specified limits.

Source record↗

NASA NTRS1990

Piezoelectric Pushers Suppress Vibrations

Vibration-suppressing control systems including piezoelectric actuators undergoing development. Small, lightweight, and rugged. Requires simpler electronic control subsystems and does not require large electromagnet coils. Continues to provide support and some passive damping even when electronic control subsystems or power supplies fail. Intended primarily to enhance safety and prevent damage in rotating machinery by sensing and counteracting vibrations. Useful in suppressing unpredictable vibrations caused by changes in loads, losses of rotating components and consequent imbalances in rotors, and ingestion of foreign objects into turbines.

Kascak, Albert F.↗

NASA NTRS1989

Composite deformable mirror

A mathematical model for a spherical hexagon mirror is described along with the model verifications. A flat hexagon epoxy mirror with aluminum core is used in test procedures in addition to a flat aluminum honeycomb mirror. Deformable reflector concepts are discussed and piezoelectric actuators are analyzed. The concept of a deformable mirror can be used to improve the overall RMS error of the mirror as presently designed and/or make necessary on-orbit adjustments.

Kuo, C. P.↗

NASA NTRS1989

Vibration suppression for precision segmented reflector backup structure

An ongoing effort at the JPL on vibration suppression for the Precision Segmented Reflector backup structure is centered on the vibration damping augmentation through a system consisting of active and passive damping members. An active member is a structural member with built-in piezoelectric actuator and sensors. An efficient method was developed for optimal placement of active and passive damping members in the truss-type backup structure. A simple synergistic model between the active and passive damping was proposed based on a weighted energy dissipation criterion. A baseline passive member design with constrained viscoelastic material treatment was used as the source of passive damping.

Chen, G.-S.↗

NASA NTRS1990

Experimental implementation of the modified independent modal space control method

An experimental realization of a modified independent modal space control (MIMSC) method to control the vibration of a flexible cantilevered beam is presented. In its operation the method relies on the use of one piezoelectric actuator to control several vibration modes through a time-sharing strategy. The effectiveness of the MIMSC method in damping out the beam vibration is demonstrated by comparing the results with those obtained by other modal control methods. Two methods are considered, the independent modal space control method and the pseudo-inverse method. The feasibility of the MIMSC method as a viable alternative for controlling large flexible structures with a very small number of actuators is emphasized.

Baz, A.↗

NASA NTRS1991

Electron tunnel sensor technology

Researchers designed and constructed a novel electron tunnel sensor which takes advantage of the mechanical properties of micro-machined silicon. For the first time, electrostatic forces are used to control the tunnel electrode separation, thereby avoiding the thermal drift and noise problems associated with piezoelectric actuators. The entire structure is composed of micro-machined silicon single crystals, including a folded cantilever spring and a tip. The application of this sensor to the development of a sensitive accelerometer is described.

Kenny, T. W.↗

NASA NTRS1991

Micromachined silicon tunnel sensor for motion detection

The extreme sensitivity of electron tunneling to variations in electrode separation has been used to construct a novel, compact displacement transducer. Electrostatic forces are used to control the separation between the tunneling electrodes, thereby eliminating the need for piezoelectric actuators. The entire structure is composed of micromachined silicon single crystals, including a folded cantilever spring and a tip. Measurements of displacement sensitivity and noise are reported. This device offers a substantial improvement over conventional technology for applications which require compact, highly sensitive transducers.

Kenny, T. W.↗

NASA NTRS1990

Free-space laser communication technologies II; Proceedings of the Meeting, Los Angeles, CA, Jan. 15-17, 1990

Various papers on free-space laser communication technologies are presented. Individual topics addressed include: optical intersatellite link experiment between the earth station and ETS-VI, the Goddard optical communications program, technologies and techniques for lasercom terminal size, weight, and cost reduction, laser beam acquisition and tracking system for ETS-VI laser communication equipment, analog dividers for acquisition and tracking signal normalization, fine pointing mechanism using multilayered piezoelectric actuator for optical ISL system, analysis of SILEX tracking sensor performance, new telescope concept for space communication, telescope considered as a very high gain antenna, design of compact transceiver optical systems for optical intersatellite links, ultralightweight optics for laser communications, highly sensitive measurement method for stray light and retroreflected light, depolarization effects on free space laser transceiver communication systems, in-orbit measurements of microaccelerations of ESA's communication satellite Olympus, high-performance laser diode transmitter for optical free space communication, diode-pumped Nd:host laser transmitter for intersatellite optical communications, single-frequency diode-pumped laser for free-space communication.

Begley, David L.↗

NASA NTRS1992

Active vibration control using a modal-domain fiber optic sensor

A closed-loop control experiment is described in which vibrations of a cantilevered beam are suppressed using measurements from a modal-domain fiber optic sensor. Modal-domain sensors are interference between the modes of a few-mode optical waveguide to detect strain. The fiber is bonded along the length of the beam and provides a measurement related to the strain distribution on the surface of the beam. A model for the fiber optic sensor is derived, and this model is integrated with the dynamic model of the beam. A piezoelectric actuator is also bonded to the beam and used to provide control forces. Control forces are obtained through dynamic compensation of the signal from the fiber optic sensor. The compensator is implemented with a real-time digital controller. Analytical models are verified by comparing simulations to experimental results for both open-loop and closed-loop configurations.

Cox, David E.↗

NASA NTRS1990

Identification and control of a flexible beam using modal domain sensor

The use of a distributed-effect, modal domain optical fiber sensor (MD sensor) as a component in an active control system to suppress vibrations in a flexible beam is discussed. The sensor model is integrated into the model for a flexible structure. Based on this system model, a control system with a dynamic compensator is designed to add damping to the low order modes of the flexible structure. To verify the modeling procedure, a cantilevered beam was instrumental with a piezoelectric actuator and an MD sensor. It is shown that experimental responses closely match simulated responses for both open loop and closed loop tests.

Cox, David E.↗

NASA NTRS1991

Active member vibration control experiment in a KC-135 reduced gravity environment

An active member vibration control experiment in a KC-135 reduced gravity environment was carried out by the Air Force Flight Dynamics Laboratory and the Jet Propulsion Laboratory. Two active members, consisting of piezoelectric actuators, displacement sensors, and load cells, were incorporated into a 12-meter, 104 kg box-type test structure. The active member control design involved the use of bridge (compound) feedback concept, in which the collocated force and velocity signals are feedback locally. An impact-type test was designed to accommodate the extremely short duration of the reduced gravity testing window in each parabolic flight. The moving block analysis technique was used to estimate the modal frequencies and dampings from the free-decay responses. A broadband damping performance was demonstrated up to the ninth mode of 40 Hz. The best damping performance achieved in the flight test was about 5 percent in the fourth mode of the test structure.

Lawrence, C. R.↗

NASA NTRS1992

Adaptive structures for precision controlled large space systems

The development of adaptive structural systems is reviewed and the potential of these systems in meeting some of the requirements for NASA future space missions is demonstrated. Particular attention is given to the characteristics of a viscous damper in the micron displacement regime; the optimal placement of active and passive members into a truss structure; a system identification test using the active members as excitation sources; a concept for deforming a lightweight composite honeycomb optical panel to correct for on-orbit distortions by using piezoelectric actuators attached to the back facesheet; and the results of an active member vibration control experiment in a reduced gravity environment.

Garba, John A.↗

NASA NTRS1991

The 4-meter lunar engineering telescope

The 16-meter diffraction limited lunar telescope incorporates a primary mirror with 312 one-meter segments; 3 nanometer active optics surface control with laser metrology and hexapod positioners; a space frame structure with one-millimeter stability; and a hexapod mount for pointing. The design data needed to limit risk in this development can be obtained by building a smaller engineering telescope on the moon with all of the features of the 16-meter design. This paper presents a 4.33-meter engineering telescope concept developed by the Summer 1990 Student Program of the NASA/JHU Space Grant Consortium Lunar Telescope Project. The primary mirror, made up of 18 one-meter hexagonal segments, is sized to provide interesting science as well as engineering data. The optics are configured as a Ritchey-Chretien with a coude relay to the focal plane beneath the surface. The optical path is continuously monitored with 3-nanometer precision interferometrically. An active optics processor and piezoelectric actuators operate to maintain the end-to-end optical configuration established by wave front sensing using a guide star. The mirror segments, consisting of a one-centimeter thick faceplate on 30-cm deep ribs, maintain the surface figure to a few nanometers under lunar gravity and thermal environment.

Peacock, Keith↗

NASA NTRS1992

Structures that adapt to space

It is shown that by allowing adjustments in space, designs that incorporate adaptive structures can reduce initial precision requirements and lower costs. Present and future spacecraft structures will need enhancements in performance, reliability, testability, and cost-effectiveness; unless a structural system meets these demands, it probably will never be implemented operationally. Attention is given to the ASTREX test facility at Edwards AFB that includes embedded piezoelectric, in-line piezoelectric actuator, and magnetostrictive active members whose testbed rapidly slews the spacecraft through large angles and then points it quickly and accurately.

Wada, Ben K.↗

NASA NTRS1992

On-line identification of forward/inverse systems for adaptive control applications

The paper is concerned with the on-line identification of system Markov parameters using observers. Two types of parameters are sought: the forward system parameters, which provide estimates of the outputs for given inputs, and inverse system parameters, which provide estimates of inputs for given outputs. A procedure is proposed which uses the inverse system to generate commands that produce a desired system response. The feasibility of the procedure is demonstrated using test results from an implementation of a truss structure fitted with piezoelectric actuators and collocated strain gauges.

Horta, Lucas G.↗

NASA NTRS1993

Piezoelectrically Bendable Mirrors For Spatial Modulation Of Light

Flexible mirrors including multiple small piezoelectric actuators (bimorphs) attached to back surfaces developed. Weigh less, respond faster, actuated by lower voltages, and include larger numbers of bending actuators for finer control of surface contours. Mirrors used as spatial light modulators in optical computers, to compensate for atmospheric distortions in astronomical telescopes, and in other applications in which wave fronts altered controllably.

Ribak, Erez N.↗