Search NASA⌕ Search

SEARCH · Search NASA

Results for “Synchronization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

A study of magnetosphere dynamics during auroral electrojet events by observations of energetic electron intensity changes at synchronous orbit

The central theme of the considered investigation is the surprising detailed correlation between dynamical changes in electron directional intensity measurements at synchronous orbit and the auroral electrojet currents in the polar ionosphere. The statistical study reported has been carried out following the discovery by Erickson and Winckler (1973) of a close relationship between the time profiles of auroral electrojet intensifications and electron intensity decreases observed in the pre-midnight sector at synchronous orbit. The electron data used in the study were obtained during 1967 and 1968 by the University of Minnesota magnetic spectrometer carried onboard ATSl.

Erickson, K. N.↗

Synchronization of clocks by very-long-baseline interferometry

Two hydrogen-maser clocks, one at Haystack Observatory and one at the National Radio Astronomy Observatory, were synchronized by means of observations of several extragalactic radio sources on March 28, and again on September 23, 1977. Observations were made sequentially in eight 360-kHz bands distributed between about 8.4 and 8.5 GHz with spacings designed to enable the group-delay difference between the signals received at the two observatories from a given source to be estimated unambiguously, within an uncertainty of less than 1 ns set by receiver noise. The epoch and the rate differences between the observatories' clocks for each experiment were estimated by analysis of observations that spanned several hours. The application of corrections for the contributions to the delays of the antennas, feeds, receiver systems, and recorders yielded absolute determinations of the clock epoch differences. During each experiment, portable cesium clocks were flown from the U.S. Naval Observatory to the observatories and back. The traveling-clock data, analyzed in each case after the VLBI synchronization had been completed, confirmed the VLBI results to within 18 and 14 ns for the first and second experiments, respectively.

Clark, T. A.↗

Independent synchronizer for digital decoders

Logic circuit synchronizes branches of any convolution code-decoder at low signal to noise ratios. Parity checks determine correct node synchronization. Device maintains synchrony as low as -3 dB. Circuit consists of 15 stage shift register, three up down counters, and some logic gates.

Stiffler, J. J.↗

RAM-Based frame synchronizer

Frame synchronizer for serial telemetry is rapidly reconfigured for changing formats. Synchronizer generates signals marking data-word boundaries, beginning of each frame, and beginning of each paragraph. Also derived are search, check, and lock status signals. Existing unit is assembled from standard random-access memory elements and MOS and low-power-Schottky logic.

Niswander, J. K.↗

Source structure errors in the synchronization of clocks by radio interferometry

Radio interferometry has the potential of synchronizing clocks across intercontinental distances with accuracies better than one nanosecond. One of the potential error sources in such determinations is the spatial structure of the natural radio sources that provide the reference signals. Due to their extent, the effective position of these sources can vary as a function of the length and orientation of the baseline vector joining the two antennas. If they are not corrected, such variations can lead to errors in clock synchronization. The theory of structure corrections is presented and specific examples are given to illustrate the nature and size of the effect.

Thomas, J. B.↗

Alternate symbol inversion for improved symbol synchronization in convolutionally coded systems

Inverting alternate symbols of the encoder output of a convolutionally coded system provides sufficient density of symbol transitions to guarantee adequate symbol synchronizer performance, a guarantee otherwise lacking. Although alternate symbol inversion may increase or decrease the average transition density, depending on the data source model, it produces a maximum number of contiguous symbols without transition for a particular class of convolutional codes, independent of the data source model. Further, this maximum is sufficiently small to guarantee acceptable symbol synchronizer performance for typical applications. Subsequent inversion of alternate detected symbols permits proper decoding.

Simon, M. K.↗

Self-synchronizing Schlieren photography and interferometry for the visualization of unsteady transonic flows

The use of self synchronizing stroboscopic Schlieren and laser interferometer systems to obtain quantitative space time measurements of distinguished flow surfaces, steakline patterns, and the density field of two dimensional flows that exhibit a periodic content was investigated. A large field single path stroboscopic Schlieren system was designed, constructed and successfully applied to visualize four periodic flows: near wake behind an oscillating airfoil; edge tone sound generation; 2-D planar wall jet; and axisymmetric pulsed sonic jet. This visualization technique provides an effective means of studying quasi-periodic flows in real time. The image on the viewing screen is a spatial signal average of the coherent periodic motion rather than a single realization, the high speed motion of a quasi-periodic flow can be reconstructed by recording photographs of the flow at different fixed time delays in one cycle. The preliminary design and construction of a self synchronizing stroboscopic laser interferometer with a modified Mach-Zehnder optical system is also reported.

Kadlec, R.↗

A seasonal change in the effect of field-aligned currents at synchronous orbit

The expected signature of substorm field-aligned currents is described for synchronous satellites near 10 deg magnetic latitude. The main effect is a positive D perturbation premidnight and a negative D perturbation postmidnight. This behavior is illustrated for two substorms near the fall equinox. A second pair of substorms taken from winter solstice do not show the expected behavior. The absence of this effect in winter observations is verified statistically by superposed epoch analysis. A simple explanation of this behavior based on the geometry of the plane of magnetic symmetry is presented. During disturbed times at winter solstice a synchronous satellite nominally at 10 deg magnetic latitude is effectively at the magnetic equator. This distortion of the magnetic equator must be considered in future models of the disturbed magnetospheric magnetic field.

Mcpherron, R. L.↗

Factors controlling the occurrence of Pc 3 magnetic pulsations at synchronous orbit

The reported investigation has the purpose to extend the study of Pc 3 pulsations at synchronous orbit conducted by Arthur and McPherron (1977). A large data set is used with the goal of finding the factors related to the occurrence of Pc 3 pulsations at synchronous orbit. The results are compared with ground-based observations. The study demonstrates that the diurnal occurrence pattern has a maximum at a prenoon local time and shows a seasonal shift. Among the solar wind parameters, solar wind velocity and the direction of the IMF are found to be dominant factors. Attention is given to the analysis procedure, examples of 2-hour spectra, diurnal occurrence pattern, the correlation between solar wind parameters, and the solar wind stream structure and Pc 3 occurrence.

Takahashi, K.↗

Low cost transfer into useful sun-synchronous orbits at Mars

Mars oblateness has been found to provide sun-synchronous orbits, including orbits with stationary apsides, similar to those used at earth. A low mass and low data rate complement of scientific instruments placed in such orbits can provide exciting planetary investigations such as the Mars Orbiter Water Mission described herein. Use of a modest Shuttle kickstage (PAM-A) and existing spacecraft hardware makes this mission low-cost. A preliminary mission and spacecraft design is described. The major emphasis of the paper is on the mechanics of heliocentric transfer for the 1986 and 1988 launch opportunities, Martian sun-synchronous orbit geometries, injectable mass capabilities, and methods of achieving these scientifically useful orbits.

Glickman, R. E.↗

Memory-based frame synchronizer

A frame synchronizer for use in digital communications systems wherein data formats can be easily and dynamically changed is described. The use of memory array elements provide increased flexibility in format selection and sync word selection in addition to real time reconfiguration ability. The frame synchronizer comprises a serial-to-parallel converter which converts a serial input data stream to a constantly changing parallel data output. This parallel data output is supplied to programmable sync word recognizers each consisting of a multiplexer and a random access memory (RAM). The multiplexer is connected to both the parallel data output and an address bus which may be connected to a microprocessor or computer for purposes of programming the sync word recognizer. The RAM is used as an associative memory or decorder and is programmed to identify a specific sync word. Additional programmable RAMs are used as counter decoders to define word bit length, frame word length, and paragraph frame length.

Stattel, R. J.↗

Results of continuous synchronous orbit testing of sealed nickel-cadmium cells

Test results from continuous synchronous orbit testing of sealed nickel cadmium cells are presented. The synchronous orbit regime simulates a space satellite maintaining a position over a fixed point on earth as the earth rotates on its axis and revolves about the sun. Characteristics of each lot of cells, test conditions, and charge control methods are described.

Harkness, J. D.↗

The effects of Viterbi decoder node synchronization losses on the telemetry receiving system

The Viterbi decoders currently used by the Deep space Network (DSN) use an algorithm for maintaining node synchronization that breaks down at bit signal-to-noise ratios (SNRs) of about 2.0 dB. It is shown that this can become an important consideration when the effects of noisy carrier referencing are combined with the lower SNRs that are expected at Voyager 2 Uranus and Neptune encounters. Depending on the available carrier power, node synchronization losses of between 0.85 and 1.25 dB can be expected in addition to the radio loss.

Deutsch, L. J.↗

Viterbi decoder node synchronization losses in the Reed-Solomon/Veterbi concatenated channel

The Viterbi decoders currently used by the Deep Space Network (DSN) employ an algorithm for maintaining node synchronization that significantly degrades at bit signal-to-noise ratios (SNRs) of below 2.0 dB. In a recent report by the authors, it was shown that the telemetry receiving system, which uses a convolutionally encoded downlink, will suffer losses of 0.85 dB and 1.25 dB respectively at Voyager 2 Uranus and Neptune encounters. This report extends the results of that study to a concatenated (255,223) Reed-Solomon/(7, 1/2) convolutionally coded channel, by developing a new radio loss model for the concatenated channel. It is shown here that losses due to improper node synchronization of 0.57 dB at Uranus and 1.0 dB at Neptune can be expected if concatenated coding is used along with an array of one 64-meter and three 34-meter antennas.

Deutsch, L. J.↗

Node Synchronization for the Viterbi Decoder

At very low signal to noise ratios such as those that Voyager 2 will encounter at Uranus, the performance of the Reed-Solomon/Viterbi concatenated coding system could be seriously degraded by loss of node synchronization by the Viterbi decoder. This problem is described and now it can be almost completely avoided with a simple outboard hardware ""node synchronizer''. This device makes statistical decisions about node sync based on the hard quantized undecoded data stream. In a worst case Voyager-like environment, our method will detect and correct a true loss of node sync (thought to be a very rate event) within several hundred bits; many of these false alarms for our technique is on the order several years.

Lorden, G.↗

Performance analysis of the word synchronization properties of the outer code in a TDRSS decoder

A self-synchronizing coding scheme for NASA's TDRSS satellite system is a concatenation of a (2,1,7) inner convolutional code with a (255,223) Reed-Solomon outer code. Both symbol and word synchronization are achieved without requiring that any additional symbols be transmitted. An important parameter which determines the performance of the word sync procedure is the ratio of the decoding failure probability to the undetected error probability. Ideally, the former should be as small as possible compared to the latter when the error correcting capability of the code is exceeded. A computer simulation of a (255,223) Reed-Solomon code as carried out. Results for decoding failure probability and for undetected error probability are tabulated and compared.

Costello, D. J., Jr.↗

Validation of a fault-tolerant clock synchronization system

A validation method for the synchronization subsystem of a fault tolerant computer system is investigated. The method combines formal design verification with experimental testing. The design proof reduces the correctness of the clock synchronization system to the correctness of a set of axioms which are experimentally validated. Since the reliability requirements are often extreme, requiring the estimation of extremely large quantiles, an asymptotic approach to estimation in the tail of a distribution is employed.

Butler, R. W.↗

The JPL near-real-time VLBI system and its application to clock synchronization and earth orientation measurements

The JPL near-real-time VLBI system called Block I is discussed. The hardware and software of the system are described, and the Time and Earth Motion Precision Observations (TEMPO) which utilize Block I are discussed. These observations are designed to provide interstation clock synchronization to 10 nsec and to determine earth orientation (UT1 and polar motion - UTPM) to 30 cm or better in each component. TEMPO results for clock synchronization and UTPM are presented with data from the July 1980-August 1981 analyzed using the most recent JPL solution software and source catalog. Future plans for TEMPO and Block I are discussed.

Callahan, P. S.↗