Search NASA⌕ Search

SEARCH · Search NASA

Results for “CdTe:I”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS2001

Computed Tomography Support for Microgravity Materials Science Experiments

The accurate measurement of density in both liquid and solid samples is of considerable interest to Principal Investigators with materials science experiments slated for the ISS. The work to be described is an innovative application of a conventional industrial nondestructive evaluation instrument. Traditional applications of industrial computed tomography (CT) rely on reconstructing cross sections of large structures to provide two-dimensional planar views which can identify defects such as porosity, or other material anomalies. This has been done on microgravity materials science experiments to check the integrity of ampoule-cartridge assemblies for safety purposes. With a substantially monoenergetic flux, as can be obtained with a radioactive cobalt source, there will be a direct correlation between absorption and density. Under such conditions it then becomes possible to make accurate measurements of density throughout a sample, and even when the sample itself is enclosed within a furnace and a safety required cartridge. Such a system has been installed at Kennedy Space Center (KSC) and is available to PIs to examine samples before and after flight. The CT system is being used to provide density information for two purposes. Firstly, the determination of density changes from liquid to solid is vital information to the PI for purposes of modeling the solidification behavior of his sample, and to engineers who have to design containment ampoules and must allow for shrinkage and other volume changes that may occur during processing. While such information can be obtained by pycnometric measurements, the possibility of using a furnace installed on the CT system enables one to examine potentially dangerous materials having high vapor pressures, while not needing visible access to the material. In addition, uniform temperature can readily be obtained, and the system can be controlled to ramp up, hold, and ramp down while collecting data over a wide range of parameters automatically. Results of initial tests on low melting point elements such as gallium, indium and tin will be presented, and the intent is to proceed to compounds such as InSb, HgCdTe and CdTe. Alloys such as Pb-Sb (PI - Poirier, U AZ) and Cu-Al (PI - Trivedi, Ames Lab.), which are the subjects of flight experiments, will also be examined. The second application is the conversion of measured density values directly to composition. This was successfully done with the mercury cadmium telluride alloys grown on the second and fourth United States Microgravity Payload (USMP-2 and USMP-4) missions by Lehoczky. CdTe values along the length of the boules were obtained at KSC prior to cutting the sample, and could have been obtained prior to its removal from the cartridge and ampoule. Examples of the data obtained will be shown. It is anticipated that several of the materials science PIs will avail themselves of the technique described, initially for determining densities prior to flight, and then to acquire early quantitative data on the compositional variation within their samples.

Gillies, Donald C.↗
NASA NTRS2009

Microstructured Optical Fiber for X-ray Detection

A novel scintillating optical fiber is presented using a composite micro-structured quartz optical fiber. Scintillating materials are introduced into the multiple inclusions of the fiber. This creates a composite optical fiber having quartz as a cladding with an organic scintillating material core. X-ray detection using these fibers is compared to a collimated cadmium telluride (CdTe) detector over an energy range from 10 to 40 keV. Results show a good correlation between the fiber count rate trend and that of the CdTe detector.

DeHaven, Stanton L.↗
NASA NTRS2014

Alkali Halide Microstructured Optical Fiber for X-Ray Detection

Microstructured optical fibers containing alkali halide scintillation materials of CsI(Na), CsI(Tl), and NaI(Tl) are presented. The scintillation materials are grown inside the microstructured fibers using a modified Bridgman-Stockbarger technique. The x-ray photon counts of these fibers, with and without an aluminum film coating are compared to the output of a collimated CdTe solid state detector over an energy range from 10 to 40 keV. The photon count results show significant variations in the fiber output based on the materials. The alkali halide fiber output can exceed that of the CdTe detector, dependent upon photon counter efficiency and fiber configuration. The results and associated materials difference are discussed.

DeHaven, S. L.↗
NASA NTRS2019

Vapor Growth of Indium Monoiodide

Indium (I) iodide, InI, is part of a group of heavy metal iodides that can be used as room temperature radiation detectors. Other examples are HgI2, PbI2, BiI3, or TlPbI3. InI has several advantages, such as low toxicity, no solid phase transition (such as in HgI2), and no tendency to form polytypes (PbI2, BiI3 ). All binary iodides have layered structures and are quite soft, but InI is also the mechanically most stable compound of the binary compounds. Table 1 shows the main properties of InI in comparison with the other iodides and the most common room temperature radiation detector material, (Cd, Zn)Te. InI is typically grown by the unseeded Bridgman method using a nucleation tip, but Czochralski (CZ) growth has also been demonstrated. The resulting crystals have been used successfully for radiation detection, but both resistivity and mobility are usually well below theoretically predicted values. Physical vapor transport (PVT), although much slower than melt growth, is an alternative method and has been used to grow e.g. HgI2, PbI2, BiI3, CdTe. PVT growth should eliminate or reduce inclusions and impurities since it is based on sublimation, reduce intrinsic defects due to the lower growth temperature, and reduce dislocation densities due to reduced thermal and mechanical stress. As an example, PVT-grown CdTe showed a much improved structural quality compared to Bridgman- or THM-grown material.

Cröll, Arne↗
NASA NTRSDate not supplied

SuperHERO (Super - High Energy Replicated Optics) Balloon Mission Concept

The SuperHERO hard-x-ray telescope is a proposed high-angular resolution successor to Marshall Space Flight Center’s (MSFC) successful High Energy Replicated Optic (HERO) and the HERO to Explore the Sun (HEROES) balloon missions. By utilizing recent advancements in MSFC’s replicated full shell, NiCo x-ray optic technology, SuperHERO will achieve its technical goal of demonstrating better than 10 arcseconds (arcsecs) angular resolution in half-power diameter (HPD) on a balloon platform. This represents a 6-fold improvement to the current state-of-the-art resolution for hard-x-ray, astrophysical telescopes and will allow for the observation of the high-energy-universe in unprecedented spatial detail. The SuperHERO balloon observatory will consist of seven coaligned, identical telescopes with a total focal length of 12-meters. Each telescope will pair a Mirror Module Assembly (MMA) comprised of NiCo shell optics matched to a CdTe Double-sided Strip Detector (CdTe-DSD) plane provided by iMAGINE-X Inc. and Kavli Institute for the Physics and Mathematics of the Universe (Kavli-IPMU). Iridium coating applied directly to each shell will boost reflectivity into the hard-x-ray regime. Employing additional high-heritage technology, SuperHERO will have an open-truss carbon-composite gondola similarly used on the XL-Calibur balloon mission and will use the Wallops Arc-Second Pointer (WASP) system for attitude control

NickThomas↗
DOE OSTI2020

Arsenic Doping of Polycrystalline CdSeTe Devices for Microsecond Life-times with High Carrier Concentrations

We report seminal advances in fabrication and understanding of group V (As) doped thin-film polycrystalline CdTe-based solar cells. The devices are fabricated using a novel approach, by sublimating layers of CdSeTe and CdSeTe:As. This new method allowed us to achieve minority carrier lifetime of over 1 μs, carrier concentration of more than 5x1015 cc-1 and external radiative efficiency of over 2% in a device configuration. We find an increase in open-circuit voltage when comparing As-doped, Cu-doped and undoped devices. The choice of CdSeTe instead of a CdTe-only absorber has been explained using first-principle density functional theory model. A SCAPS device model is used to analyze the potential causes for lower open-circuit voltage.

14 SOLAR ENERGY↗
DOE OSTI2021

Carrier Lifetime as a Function of Se Content for CdSexTe1-x Films Grown on Al2O3 and MgZnO: Preprint

Time-resolved photoluminescence (TRPL) with two excitation wavelengths – 670 (standard) and 405 nm – was used to examine the effect on carrier lifetime of two significant recent advances in CdTe: the incorporation of Se to form graded CdSe x Te 1-x and the use of Mg y Zn 1-y O buffers. The two excitation wavelengths probe depths of approximately 130 and 35 nm, respectively, and their comparison helps differentiate interface and bulk contributions to carrier lifetime. It was found that x = 0.2 Se was required to obtain lifetime improvements, primarily in the bulk. Additionally, TRPL traces for Mg y Zn 1-y O/CdSe x Te 1-x samples showed fast initial decay followed by a long-lived tail, which may be indicative of trap-dominated recombination. This behavior was not present for CdSe x Te 1-x films grown on Al 2 O 3 , which is currently state-of-the-art for surface passivation in CdTe. This indicates that further work is required to sufficiently passivate the front interface.

cadmium telluride↗
DOE OSTI2024

Updated sustainability status of cadmium telluride thin‐film photovoltaic systems and projections

This paper provides a comprehensive assessment of the up-to-date life-cycle sustainability status of cadmium-telluride based photovoltaic (PV) systems. Current production modules (Series 6 and Series 7) are analyzed in terms of their energy performance and environmental footprint and compared with the older series 4 module production and current single-crystalline Silicon (sc-Si) module production. For fixed-tilt systems with Series 6 modules operating under average US irradiation of 1800 kWh/m 2 /year, the global warming potential (GWP) is reduced from 16 g CO 2eq /kWh in Series 4 systems to 10 CO 2 eq /kWh in Series 6 systems. For operation in US-SW irradiation of 2300 kWh/m 2 /year, the GWP is reduced from 11 to 8 CO 2eq /kWh and for 1-axis tracking systems operating in Phoenix, Arizona, with point-of array irradiation of 3051 kWh/m 2 /year the GWP is reduced to 6.5 CO 2eq /kWh. Similar reductions have happened in all environmental indicators. Energy payback times (EPBT) of currently installed systems range from 0.6 years for fixed–tilt ground–mounted installations at average US irradiation at latitude tilt installations to 0.3 years for one-axis trackers at high US-SW irradiation, considering average fossil-fuel dominated electricity grids with fuel to electricity conversion efficiency of 0.3. The resulting energy return on energy investment (EROI) also depends on the conversion efficiency of the electricity grid and on the operation life expectance. For a 30-year operational life and grid conversion efficiency of 0.3, EROI ranges from 50 (at US average irradiation) to 70 for US-SW irradiation. The EROI declines with increased grid conversion efficiency; for CdTe PV operating in south California with grid conversion efficiency of 49%, the EROI is about 50 and is projected to fall to 30 when the state's 2030 target of 80% renewable energy penetration materializes. Material alternatives that show a potential of further reductions in degradation rates and materials for enhanced encapsulation that would enable longer operation lives have also been investigated. A degradation rate of 0.3%/year, which has been verified by accelerated testing, is assumed in 30-year scenarios; this is projected to be reduced to 0.2%/year in the near-term and potentially to 0.1%/year in the longer term. With such low degradation rates and enhanced edge-sealing, modules can last 40- to 50-years. Consequently, all impact indicators will be proportionally reduced while EROI will increase. This detailed LCA was conducted according to ISO standards and IEA PVPS Task 12 guidelines. Furthermore, the study revealed that the choices of system models, methods and temporal system boundaries can significantly impact the results and points out to the need to include assumptions regarding these choices in the “transparency in reporting” requirements listed in the IEA PVPS Task 12 Guidelines.

14 SOLAR ENERGY↗
DOE OSTI2021

Sputter-deposited CdMgTe for rear contact to CdSeTe/CdTe solar cells

CdTe-based photovoltaic device performance improvement is predominantly limited by open-circuit voltage. This work approaches the voltage deficit challenge through the incorporation of a cadmium magnesium telluride (CdMgTe) electron reflector layer at the back of 1.5- μm CdSeTe/CdTe absorbers to reduce back-surface recombination through a conduction band offset. A sputtered CdMgTe electron reflector layer permitted low fabrication temperatures and circumvented the intolerance of CdMgTe to thermal processing present in traditional close-space sublimation (CSS)-deposited CdMgTe devices. Here, we demonstrate that sputtered CdMgTe simultaneously promotes the retention of chlorine passivation and magnesium which is not feasible with CSS fabrication. We also show the importance of the Cu and Te back contact order in CdMgTe devices. Through the optimization of the sputtered CdMgTe substrate temperature, doping, and back structure configuration, 1.5 μm CdSeTe/CdTe devices with a sputtered CdMgTe layer achieved an efficiency of 16.0%, significantly higher than with CSS CdMgTe, and demonstrated partial enactment of electron-reflector behavior.

14 SOLAR ENERGY↗
DOE OSTI2023

Oxygen Management to Avoid Photo-Inactive Cd(S,Se) for Efficient Cd(Se,Te) Solar Cells

Our previous work has demonstrated that the formation of a penternary cadmium chalcogenide Cd(O,S,Se,Te) region can significantly reduce the front interface recombination in Cd(Se,Te)-based thin-film solar cells. In this work, we have shown that oxygen management during the device fabrication is crucial to form this region. While both the CdS and CdSe layer depositions and the postdeposition CdCl2 treatment should be conducted in the presence of oxygen, the CdTe deposition should be conducted in an oxygen-free atmosphere. Improper oxygen management leads to low device performance due to the formation of a photoinactive Cd(S,Se) region and reduced absorber quality. Additionally, we investigated the carrier transport and collection properties in devices with photoinactive Cd(S,Se) and photoactive Cd(O,S,Se,Te) at the front interface to gain comprehensive understanding of the mechanisms that resulted in improved efficiencies approaching 20%.

CdTe deposition↗
DOE OSTI2025

Doping with phosphorus reduces anion vacancy disorder in CdSeTe semiconductors enabling higher solar cell efficiency

Doping is used in many pn junction devices, such as polycrystalline solar cells, to increase the strength of the junction field to assist charge carrier collection and thus partially mitigate nonradiative recombination losses. We demonstrate a different doping characteristic for inorganic solar cells: using dopants to reduce charge carrier trapping and electronic band tails. Alloying CdTe with Se to form CdSeTe semiconductor reduced recombination, but CdSeTe has more complex defect states which can limit further efficiency gains due to charge carrier trapping and trap-limited mobility. Doping CdSeTe with P (but not N, As, or Sb in this study) reduces band tails (Urbach energies) and lessens the impact of the near valence band trap states, with ambipolar mobilities improving to >50 cm 2 V −1 s −1 , fill factor increasing from 76% to 79%, and efficiencies increasing by 0.9% absolute. Simulations are used to show how such defect reduction improves performance in the radiative limit.

14 SOLAR ENERGY↗
DOE OSTI2023

A Dive into Underwater Solar Cells

Our oceans are vast, mostly unexplored and difficult to monitor. Large-scale implementation of a fully autonomous 'Internet of Underwater Things' would transform how we collect and share data from this domain; however, deployment is prohibited by the lack of persistent power sources. In principle, underwater solar-energy generation can complement the use of batteries and provide a solution, although dedicated research is needed since traditional silicon solar cells do not perform well underwater due to water's strong absorption of near-infrared light. In this Perspective we present examples of solar-powered underwater applications and discuss which types of solar-harvesting materials could be appropriate, including GaInP variants, CdTe, organic semiconductors, and perovskite semiconductors. We also discuss challenges that need to be addressed, such as the development of effective antifouling coatings and new certification standards given that underwater conditions are starkly different from those in terrestrial environments.

antifouling coatings↗
DOE OSTI2020

Chapter 8: Time-Resolved Photoluminescence Characterization of Polycrystalline Thin-Film Solar Cells

This chapter describes some photoluminescence (PL) approaches to characterize thin film solar cells with emphasis on time-resolved methods. Spectral PL analysis is complementary and was recently reviewed. Since TRPL is not very commonly used in PV characterization, we consider interface and bulk recombination in the test structures and in devices, briefly describe charge-carrier transport and recombination microscopy, and finally, summarize and compare some CdTe, CdSeTe, CIGS, kesterite, and perovskite EO characteristics.

bulk recombination↗
DOE OSTI2020

Evidence of Buried Junctions in CdSeTe Absorbers

The introduction of selenium band gap gradients has been shown to be a promising path for improving CdTe devices. Controlling maximum selenium concentration during deposition should allow for better device performance. In this work cross-section electron beam induced current (EBIC) maps were measured for CdSeTe/CdTe devices with as-grown selenium concentration between 0 and 20 percent. Measured EBIC profiles show high collection in the middle of the absorber layer, which differs from past EBIC studies of CdSe/CdTe devices. Increasing as-deposited selenium concentrations resulted in increased collection at this mid-absorber location. Combined with a 2-dimensional numerical model, these results suggest a buried homo-junction in the absorber layer of the device. This buried junction may be associated with a number of composition dependent parameters including electron affinity and p-dopability. Understanding this collection profile and its implications for device performance may be key in optimizing CdSeTe/CdTe devices.

CdSeTe↗
DOE OSTI2021

Photovoltaic (PV) Module Technologies: 2020 Benchmark Costs and Technology Evolution Framework Results

This report benchmarks 2020 PV module minimum sustainable price (MSP) via bottom-up manufacturing cost analysis, for established PV technologies in mass production, including crystalline silicon, cadmium telluride (CdTe), and copper indium gallium (di)selenide. We provide technology roadmaps to additional MSP reductions for these PV technologies. Separately, we consider III-V and perovskite PV technologies which are currently in small-scale or pilot production. Finally, this report uses a technology evolution framework (TEF) to analyze drivers of levelized cost of energy reductions, including installed system cost - which is heavily influenced by module price - as well as service life and annual energy yield.

14 SOLAR ENERGY↗