SEARCH · Search NASA

Results for “bubble”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

All sources NASA NTRS DOE OSTI

NASA NTRS1982

A numerical method for the dynamics of non-spherical cavitation bubbles

A boundary integral numerical method for the dynamics of nonspherical cavitation bubbles in inviscid incompressible liquids is described. Only surface values of the velocity potential and its first derivatives are involved. The problem of solving the Laplace equation in the entire domain occupied by the liquid is thus avoided. The collapse of a bubble in the vicinity of a solid wall and the collapse of three bubbles with collinear centers are considered.

Lucca, G.↗

NASA NTRS1982

Size distribution of oceanic air bubbles entrained in sea-water by wave-breaking

The size of oceanic air bubbles produced by whitecaps and wave-breaking is determined. The production of liquid aerosols at the sea surface is predicted. These liquid aerosols are at the origin of most of the particulate materials exchanged between the ocean and the atmosphere. A prototype was designed and built using an optical technique based on the principle of light scattering at an angle of ninety degrees from the incident light beam. The output voltage is a direct function of the bubble diameter. Calibration of the probe was carried out within a range of 300 microns to 1.2 mm. Bubbles produced by wave-breaking in a large air-sea interaction simulating facility. Experimental results are given in the form of size spectrum.

Resch, F.↗

NASA NTRS1982

Collapse of large vapor bubbles

The refilling of propellant tanks while in a low-gravity environment requires that entrapped vapor bubbles be collapsed by increasing the system pressure. Tests were performed to verify the mechanism of collapse for these large vapor bubbles with the thermodynamic conditions, geometry, and boundary conditions being those applicable to propellant storage systems. For these conditions it was found that conduction heat transfer determined the collapse rate, with the specific bubble geometry having a significant influence.

Tegart, J.↗

NASA NTRS1984

Analysis of airfoil transitional separation bubbles

A previously developed local inviscid-viscous interaction technique for the analysis of airfoil transitional separation bubbles, ALESEP (Airfoil Leading Edge Separation) has been modified to utilize a more accurate windward finite difference procedure in the reversed flow region, and a natural transition/turbulence model has been incorporated for the prediction of transition within the separation bubble. Numerous calculations and experimental comparisons are presented to demonstrate the effects of the windward differencing scheme and the natural transition/turbulence model. Grid sensitivity and convergence capabilities of this inviscid-viscous interaction technique are briefly addressed. A major contribution of this report is that with the use of windward differencing, a second, counter-rotating eddy has been found to exist in the wall layer of the primary separation bubble.

Davis, R. L.↗

NASA NTRS1984

Bubble formation in oxide scales on SiC

The oxidation of alpha-SiC single crystals and sintered alphaand beta-SiC polycrystals has been investigated at elevated temperatures. Bubble formation is commonly observed in oxide scales on polycrystalline SiC, but is rarely found on single-crystal scales; bubbles result from the preferential oxidation of C inclusions, which are abundant in SiC polycrystals. The absence of bubbles on single crystals, in fact, implies that diffusion of the gaseous species formed on oxidation, CO (or possibly SiO), controls the rate of oxidation of SiC.

Mieskowski, D. M.↗

NASA NTRS1984

Analysis of airfoil transitional separation bubbles

A previously developed local inviscid-viscous interaction technique for the analysis of airfoil transitional separation bubbles, ALESEP (Airfoil Leading Edge Separation), has been modified to utilize a more accurate windward finite difference procedure in the reversed flow region, and a natural transition turbulence model has been incorporated for the prediction of transition within the separation bubble. Numerous calculations and experimental comparisons are presented to demonstrate the effects of the windward differencing scheme and the natural transition turbulence model. Grid sensitivity and convergence capabilities of this inviscid-viscous interaction technique are briefly addressed. A major conclusion of this paper is that a second, counter-rotating eddy has been found to exist in the wall layer of the primary separation bubble with the use of windward differencing.

Davis, R. L.↗

NASA NTRS1984

Effect of a buried-wire gage on the separation bubble Numerical study

A numerically simulated buried-wire separation gage is investigated with emphasis on its effect on the separation bubble. The conjugated problem of a supersonic, time-dependent, two-dimensional flowfield above a conductive solid wall with an embedded heat source is solved using implicit finite difference algorithms. Steady-state and transient cases were computed for different locations of the heat source within the bubble. Results show that by using a steady heat source, the flow direction near the wall can be detected, without distorting the flowfield, only if the source is located in regions where the bubble is thick (i.e., not too close to the separation). The flow direction near separation can be detected by using a temperature pulse at the solid/fluid interface with insignificant distortion of the flowfield.

Degani, D.↗

NASA NTRS1986

Fast Initialization of Bubble-Memory Systems

Improved scheme several orders of magnitude faster than normal initialization scheme. State-of-the-art commercial bubble-memory device used. Hardware interface designed connects controlling microprocessor to bubblememory circuitry. System software written to exercise various functions of bubble-memory system in comparison made between normal and fast techniques. Future implementations of approach utilize E2PROM (electrically-erasable programable read-only memory) to provide greater system flexibility. Fastinitialization technique applicable to all bubble-memory devices.

Looney, K. T.↗

NASA NTRS1986

Four-micron period ion-implanted bubble test circuits

Packaged magnetic bubble test circuits made with 4-micron period ion-implanted circuits were operated over -55 to +110 C. The circuits used bidirectional transfer and nondestructive detection and were made on bismuth-containing magnetic garnet films. Passivated circuits that incorporated an improved transfer conductor design were operated on films with higher Gilbert damping parameters. Potential advantages to using films with lower bubble aspect ratios for ion-implanted circuits are discussed. However nondestructive read-out detection was not realized with these 'flat' bubbles.

Nelson, T. J.↗

NASA NTRS1986

Kinetic efficiencies of stellar wind bubbles

The theoretical fraction of a stellar wind's energy converted into the kinetic energy of an expanding swept-up shell is 20 percent in the classical theory of stellar wind bubbles. Observational estimates of this conversion factor based on the amount of ionized material in wind-swept shells about Wolf-Rayet stars generally yield results of 1 percent. If there is a substantial amount of neutral material in the shell, it will not be counted and the kinetic efficiency will be underestimated. Presented here is a dynamical estimate which accounts for this neutral material in deducing the kinetic efficiencies of stellar wind bubbles. Bubbles classified as wind-blown shells have kinetic efficiencies in line with theoretical expectations for energy-conserving evolution in a homogeneous medium. Ringlike nebulae have significantly lower efficiencies, probably because they have been 'poisoned' by the photoevaporation of clouds engulfed during evolution into a cloudy substrate.

Van Buren, D.↗

NASA NTRS1986

Physical data measurements and mathematical modelling of simple gas bubble experiments in glass melts

In this work consideration is given to the problem of the extraction of physical data information from gas bubble dissolution and growth measurements. The discussion is limited to the analysis of the simplest experimental systems consisting of a single, one component gas bubble in a glassmelt. It is observed that if the glassmelt is highly under- (super-) saturated, then surface tension effects may be ignored, simplifying the task of extracting gas diffusivity values from the measurements. If, in addition, the bubble rise velocity is very small (or very large) the ease of obtaining physical property data is enhanced. Illustrations are given for typical cases.

Weinberg, Michael C.↗

NASA NTRS1987

Thermocapillary migration of a gas bubble in an arbitrary direction with respect to a plane surface

The thermocapillary migration of a gas bubble in an unbounded fluid in the presence of a neighboring rigid plane surface is considered in the limit of negligible Reynolds and Marangoni numbers. Results are given for a scalar interaction parameter defined as the ratio of the speed of the bubble in the presence of the plane surface to the speed in its absence. It is suggested that the weaker interaction effects noted for the case of thermocapillary migration relative to the case of motion due to a body force such as that caused by a gravitational field is attributable to the more rapid decay, away from the bubble, of the disturbance velocity and temperature gradient fields. The surface is found to exert the greatest influence in the case of motion normal to it, and the weakest influence in the case of parallel motion.

Meyyappan, M.↗

NASA NTRS1987

The dissolution or growth of a gas bubble inside a drop in zero gravity

The radius-time history of a gas bubble located concentrically within a spherical liquid drop in a space laboratory is analyzed within the framework of the quasi-stationary approximation. Illustrative results are calculated from the theory which demonstrate interesting qualitative features. For instance, when a pure gas bubble dissolves within a liquid drop in an environment containing the same gas and some inert species, the dissolution can be more or less rapid than that in an unbounded liquid depending on the initial relative size of the drop. Further, given a similar growth situation, indefinite growth is not possible, and the bubble will initially grow, but always dissolve in the end.

Kondos, Pericles A.↗

NASA NTRS1988

Effect of surface tension on the dynamical behavior of bubble in rotating fluids under low gravity environment

Time dependent evolutions of the profile of free surface (bubble shapes) for a cylindrical container partially filled with a Newtonian fluid of constant density, rotating about its axis of symmetry, have been studied. Numerical computations of the dynamics of bubble shapes have been carried out with the following situations: (1) linear functions of spin-up and spin-down in low and microgravity environments, (2) linear functions of increasing and decreasing gravity enviroment in high and low rotating cylidner speeds, (3) step functions of spin-up and spin-down in a low gravity environment, and (4) sinusoidal function oscillation of gravity environment in high and low rotating cylinder speeds. The initial condition of bubble profiles was adopted from the steady-state formulations in which the computer algorithms have been developed by Hung and Leslie (1988), and Hung et al. (1988).

Hung, R. J.↗

NASA NTRS1988

Unsteady thermocapillary migration of bubbles

Upon the introduction of a gas bubble into a liquid possessing a uniform thermal gradient, an unsteady thermo-capillary flow begins. Ultimately, the bubble attains a constant velocity. This theoretical analysis focuses upon the transient period for a bubble in a microgravity environment and is restricted to situations wherein the flow is sufficiently slow such that inertial terms in the Navier-Stokes equation and convective terms in the energy equation may be safely neglected (i.e., both Reynolds and Marangoni numbers are small). The resulting linear equations were solved analytically in the Laplace domain with the Prandtl number of the liquid as a parameter; inversion was accomplished numerically using a standard IMSL routine. In the asymptotic long-time limit, the theory agrees with the steady-state theory of Young, Goldstein, and Block. The theory predicts that more than 90 percent of the terminal steady velocity is achieved when the smallest dimensionless time, i.e., the one based upon the largest time scale-viscous or thermal-equals unity.

Dill, Loren H.↗

NASA NTRS1989

Potential uses of vacuum bubbles in noise and vibration control

Vacuum bubbles are new acoustic elements which are dynamically more compliant than the gas volume they replace, but which are statically robust. They are made of a thin metallic shell with vacuum in their cavity. Consequently, they pose no danger in terms of contamination or fire hazard. The potential of the vacuum bubble concept for noise and vibration control was assessed with special emphases on spacecraft and aircraft applications. The following potential uses were identified: (1) as a cladding, to reduce sound radiation of vibrating surfaces and the sound excitation of structures, (2) as a screen, to reflect or absorb an incident sound wave, and (3) as a liner, to increase low frequency sound transmission loss of double walls and to increase the low frequency sound attenuation of muffler baffles. It was found that geometric and material parameters must be controlled to a very high accuracy to obtain optimal performance and that performance is highly sensitive to variations in static pressure. Consequently, it was concluded that vacuum bubbles have more potential in spacecraft applications where static pressure is controlled more than in aircraft applications where large fluctuations in static pressure are common.

Ver, Istvan L.↗

NASA NTRS1989

On the generation of a bubbly universe - A quantitative assessment of the CfA slice

A first attempt is made to calculate the properties of the matter distribution in a universe filled with overlapping bubbles produced by multiple explosions. Each spherical shell follows the cosmological Sedov-Taylor solution until it encounters another shell. Thereafter, mergers are allowed to occur in pairs on the basis of N-body results. At the final epoch, the matrix of overlapping shells is populated with 'galaxies' and the properties of slices through the numerically constructed cube compare well with CfA survey results for specified initial conditions. A statistic is found which measures the distance distribution from uniformly distributed points to the nearest galaxies on the projected plane which appears to provide a good measure of the bubbly character of the galaxy distribution. In a quantitative analysis of the CfA 'slice of the universe', a very good match is found between simulation and the real data for final average bubble radii of (13.5 + or - 1.5)/h Mpc with formal filling factor 1.0-1.5 or actual filling factor of 65-80 percent.

Ostriker, J. P.↗

NASA NTRS1989

Cosmic structure from radiation-blown bubbles

Absorbing material in an expanding universe filled with sources of radiation is subject to an instability driven by radiation pressure. In the optically thick limit, this instability takes the form of rapidly growing cavities or bubbles in the absorbing material. No matter how small they are when they begin, such bubbles grow to approach a limiting size which depends only on the ratio of photon pressure to absorber inertia. For a nonprimordial submillimeter radiation background as strong as that recently detected by the Berkely-Nagoya group, the bubbles grow to a comoving radius of about 20 Mpc, comparable in scale to the voids seen in the large-scale galaxy distribution.

Hogan, Craig J.↗