Search NASA⌕ Search

SEARCH · Search NASA

Results for “CONTROL SURFACE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Advanced Anti-Fouling Coatings to Improve the Efficiency of Coal Power Plants

As the total cost of carbon to generate energy has become a global concern, operators are increasingly looking at all parts of the generation cycle to find areas where efficiency gains may be found. It has been long identified that fouling of heat exchangers is a persistent cause of up to 2.5% of global CO 2 emissions. Unfortunately, practice has also demonstrated that unless a powerful economic driver exists to encourage preemptive mitigation of fouling, there will always be a strong tendency for operators to minimize any form of intervention due to high costs and challenges in scheduling downtime. The objective of this proposed research effort was to demonstrate how existing power plants could lower their carbon emissions and significantly improve heat transfer efficiency using new surface treatment materials to control fouling in a variety of heat exchange equipment. The surface treatment material which was optimized and deployed in this effort is now known commercially as HeatX. It is a low-surface energy, water- and oil-repellent, abrasion resistant material which can be applied in-situ to a wide variety of previously worn/used/in-service substrates. Once applied, it provides a barrier against corrosion, scale deposit formation, and biofilm adhesion on the circulating water-containing tube-side. Alternatively, if applied to the tube exterior, the non-wetting nature of the surface was demonstrated to promote dropwise condensation, subsequently lowering condenser backpressure and increasing overall plant efficiency. As part of this cooperative effort, the Department of Energy’s support was crucial to de-risk and demonstrate the concept of HeatX, while validating both the performance and economic benefit in multiple pilot field studies. The HeatX material properties were optimized in this effort for full field applicability to heat exchangers and condensers, and Oceanit developed the necessary procedures and protocols to provide enough material to support extended length, multi-year demonstrations in the power generation, desalination, and refining industries, making this technology broadly applicable and ready for commercial transition. Field deployment case studies at thermal power plants have shown that the HeatX treatment can provide economic savings of up to $15,000 per day for an operator based on avoiding maintenance costs and lowering fuel usage. The complete mitigation of fouling effects can increase the efficiency of equipment by up to 7%, in a field where gains of 0.5% are generally seen as operationally significant. The HeatX treatment has also demonstrated exceptional lifetime and compatibility with a wide variety of seawater and hydrocarbon environments, further increasing both the return on investment and the effective emission reduction. Such efficiency improvements correlate to massive carbon savings. For every 1 GW of capacity, operators can see carbon emissions reductions of 300,000 tons of CO 2 per year. When looking at the bigger picture, improved condenser function across the U.S. has the potential to prevent 221.3 million tons of CO 2 emissions, equivalent to the sequestration capacity of 129 million acres of forest. If applied on a global scale, 1.26 billion metric tons of CO 2 could be averted from the atmosphere, the same amount of carbon sequestrated by 1.5 billion acres of forest annually or 262,000 wind turbines operating annually. As businesses across multiple industries take a more active role in focusing on environmental, social, and governance (ESG) solutions as part of their core business operations, HeatX will be an attractive technology for commercial investment.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2023

Robust highly durable solid oxide fuel cell cathodes – Improved materials compatibility & self-regulating surface chemistry

Solid oxide fuel cells (SOFCs) are electrochemical conversion devices that directly transform hydrogen or hydrocarbon fuels to electricity, with energy efficiencies as high as 90%, coupled with reduced emissions. Several factors, however, remain to be addressed when considering scale-up of SOFC technology, including the need to overcome decreased performance due to sluggish rates of the oxygen reduction reaction (ORR) at the cathode under reduced temperatures and susceptibility to degradation in performance from surface poisoning e.g. from chromia, while limiting the use of critical raw materials (lanthanides and transition metals) present in high performing mixed ionic electronic conducting electrodes like (La,Sr)CoO 3 (LSC). In this project we explored the key descriptors for determining ORR activity in SOFC electrodes and tried to recover performance degradation by applying them to SOFC electrodes. In order to do this, we first selected a model mixed ionic electronic conducting (MIEC) oxide, Pr-doped CeO 2 (Pr 0.1 Ce 0.9 O 2-δ , PCO), which is a chemically stable fluorite and free of inherent poison sources (e.g. Sr segregation in LSC) that potentially react with external impurities such as Cr-species vaporized from the interconnect. The three approaches originally planned in this project are as follows: 1) evaluation of scavenger exsolution characteristics, 2) study of scavengers gettering efficacy following Cr and Si poisoning and 3) integration of new compositions into porous electrodes. Among them, exceptional progress has been made in 2) and 3), especially understanding the role of surface infiltrants in impacting electrode performance and degradation of PCO materials. We found that the Smith acidity scale for binary oxides serves as a powerful descriptor for tuning and predicting the oxygen exchange kinetics on MIEC PCO surfaces. As a result, with infiltration with binary oxides, ranging from strongly basic (Li 2 O) to strongly acidic (SiO 2 ) onto the surface of porous PCO, it was possible to systematically vary the chemical surface exchange coefficient (k chem ) by 6 orders of magnitude! L i2 O increased k chem by nearly 1,000 times over that of pristine PCO, while SiO 2 decreased k chem by nearly the same factor. Strikingly, although the pre-exponential of k chem scales linearly with the acidity of the infiltrated binary oxide, there is nearly no change in the activation energy. With this insight, we attributed the origin of these dramatic changes in k chem values to the systematic increase and decrease in the surface electron density induced by infiltrated binary oxides. More interestingly, although both Cr 2 O 3 and SiO 2 were determined to be acidic by Smith, suggesting that this feature could likely be the primary reason that these compounds serve to poison the ORR on SOFC cathodes, the effect of poisoning could be subsequently tuned by adding multiple infiltrants and controlling their relative surface acidities. We also systematically examined the effect of serial infiltration of basic and acidic oxides. It turned out that serial infiltration of Li not only recovers approximately 20-fold degraded k chem of PCO by acidic Cr 2 O 3 but its k chem is enhanced even beyond that of the non-infiltrated PCO by more than three orders of magnitude. This was further verified with a screen-printing PCO symmetric cell in terms of the electrode performance (area-specific resistance, ASR) related to approach 3). These observations point to acidity as a key descriptor not only in tuning and predicting the ORR activity of SOFC cathodes that largely determines the overall performance of SOFC, but in mitigating and reactivating poisoned electrode performance. This work provides novel guidelines for making the electrode performance much more active and robust in SOFCs, which can further be applied to all applications requiring oxygen exchange reaction, such as electrolyzers, permeation membranes and gas sensors.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2021

Adapting confocal Raman microscopy for in situ studies of redox transformations at electrode-electrolyte interfaces

Confocal Raman microscopy was applied to quantify redox species present within the diffusion layer adjacent to an electrode surface under potentiostatic control. A glass microscope coverslip with a thin indium tin oxide (ITO) coating served as both the working electrode and optical window for a microscope-stage mountable spectroelectrochemical cell. A high numerical aperture objective mounted in an inverted microscope frame just below the stage brought excitation radiation through the coverslip window and to a tight focus a few micrometers above the ITO film surface. Species diffusing into the confocal probe volume defined by the excitation beam focus and the collected light region were detected, identified and quantified based on their Raman scattering frequencies and intensities. Here, in measurements that interrogated the interconversion of ferrocyanide and ferricyanide ions as a function of applied voltage, least-squares regression analysis of spectral datasets predicted the formal potential and relative surface concentrations of the ions in good agreement with the expected Nernstian response. Preliminary studies of methyl viologen reduction at an ITO film/Nafion membrane interface were conducted and show the possibility for estimation of mass transport coefficients of redox species within ionic polymer materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Monthly Mean In Situ Surface Flux Observations Paired with Satellite-Derived and Reanalysis-Based Flux Data for the Great Lakes Region, 2001–2020

Surface radiative and turbulent heat fluxes over the Great Lakes strongly influence regional hydrological and meteorological processes, and their accurate representation is critical for numerical weather prediction and coupled atmosphere–lake modeling. However, direct flux observations are spatially sparse across the region, so gridded reanalysis and satellite-derived products are often used for climatological analyses and model evaluation despite differences in their flux representations. This dataset provides processed, quality-controlled, monthly mean surface flux observations from the Great Lakes Evaporation Network (GLEN), AmeriFlux, and the National Data Buoy Center, paired with spatiotemporally matched flux estimates from two reanalysis products, the fifth generation European Centre for Medium-Range Weather Forecasts (ECMWF) reanalysis dataset (ERA5) and the Modern Era Reanalysis for Research and Applications, version 2 (MERRA-2), and two satellite-derived products, the Clouds and Earth's Radiant Energy Systems Energy Balanced and Filled (CERES-EBAF) and the Cloud, Albedo and Surface Radiation dataset from AVHRR data - Edition 3 (CLARA-A3). The dataset includes sixteen observational stations with variable temporal coverage within 2001–2020. For each station, a CSV file contains monthly time series of available flux variables, including surface downwelling shortwave radiation (SW), surface downwelling longwave radiation (LW), sensible heat (SH) flux, and latent heat flux (LH), alongside matched gridded product values where available. Columns in the CSV file correspond to different variables sourced from each dataset, with column titles structured as "{dataset}_{variable}". Columns with relevant metadata are also provided in each CSV file, including station latitude and longitude, monthly timestamps, and the name of the sourced observational data. These files are structured for direct use in common analysis tools, including Microsoft Excel, Python pandas, and Python matplotlib. This dataset supports climatological analysis of the Great Lakes regional surface energy budget, evaluation of satellite-derived and reanalysis-based flux products, and development or validation of flux representations in numerical weather prediction and coupled atmosphere–lake models.

Great Lakes↗
DOE OSTI2025

Lewis Acid Site Engineering in Chromite Spinels Orchestrated Surface Reconstruction and Surpasses RuO 2 in Oxygen Evolution

Atomic-scale engineering of chromite spinels featuring redox-active tetrahedral A-sites and strong Cr–O covalency offers a promising route to superior platinum-group-metal-free oxygen evolution reaction (OER) catalysts. However, comprehensive studies addressing how cation substitution influences surface chemistry and governs OER activity and durability in chromite spinels remain limited. Here, in this work, a systematic investigation of the multicationic chromite series Ni x Fe y Cr 3−x−y O 4 is presented, identifying composition-dependent Lewis acidity as a descriptor of superior OER performance. It is further demonstrated that tuning surface acidity directly controls dynamic reconstruction processes and lattice-oxygen participation during spinel-based electrocatalysis. Following activation, the optimized Ni 0.8 Fe 0.3 Cr 1.9 O 4 catalyst delivers a current density of 10 mA cm −2 at an overpotential of 235 mV, surpassing RuO 2 , with excellent long-term stability. Integrating microscopic and spectroscopic analysis with operando impedance spectroscopy, it shows that activation generates an oxyhydroxide overlayer and reveals a previously unrecognized link between surface Lewis acidity and the growth kinetics and activity of these shells. Density functional theory calculations indicate that Fe incorporation at octahedral sites raises the O 2p-band center and lowers oxygen-vacancy formation energy, promoting lattice-oxygen activation and triggering reconstruction, yielding enhanced OER. This work integrates cation-driven surface-acidity modulation, acidity-governed reconstruction, and OER activity enhancement into a unified predictive framework for designing earth-abundant spinel-based catalysts.

operando impedance spectroscopy↗
DOE OSTI2023

Control of ternary alloy composition during remote epitaxy on graphene

Understanding the sticking coefficient σ, i.e., the probability of an adatom sticking to a surface, is essential for controlling the stoichiometry during epitaxial film growth. However, σ on monolayer graphene-covered surfaces and its impact on remote epitaxy are not understood. Here, using molecular-beam epitaxial growth of the magnetic shape memory alloy Ni 2 MnGa, we show that the sticking coefficients for metals on graphene-covered MgO (001) are less than one and are temperature and element dependent, as revealed by ion backscattering spectrometry and energy-dispersive x-ray spectroscopy. This lies in stark contrast with most transition metals sticking on semiconductor and oxide substrates, for which σ is near unity at typical growth temperatures (T < 800°C). By initiating growth below 400°C, where the sticking coefficients are closer to unity and wetting on the graphene surface is improved, we demonstrate the epitaxy of Ni 2 MnGa films with controlled stoichiometry that can be exfoliated to produce freestanding membranes. Straining these membranes tunes the magnetic coercive field. Finally, our results provide a route to synthesize membranes with complex stoichiometries whose properties can be manipulated via strain.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Sound Assisted Low Temperature Spalling: Upscaling and Throughput

In evaluating the state-of-the-art spalling techniques, the key factor that is missing is the control of crack propagation, which is responsible for low quality wafers due to high surface roughness and Total Thickness Variation, TTV. This project has shown that acoustic waves can alter the conditions at the crack tip during thermal spalling, modifying the propagation speed and the stress field around it (stress intensity factor, K). Both factors are directly related to the roughness of the spalled surface, so as we control speed and stress, we can fine-tune the surface roughness through the entire wafer as suggested by Arakawa.

42 ENGINEERING↗
DOE OSTI2025

Nickel hydroxide–nickel carbonate competitive growth on carbonate surfaces

The thermodynamic and kinetic factors controlling the competitive heterogeneous nucleation and growth of ubiquitous metal carbonate and hydroxide phases are poorly understood. In this work, calcite (CaCO 3 ) and magnesite (MgCO 3 ) powders were reacted with NiCl 2 (0–600 μM) for 7 days at 22 °C and 5 °C. The reacted powders were analyzed with X-ray photoelectron spectroscopy (XPS), scanning electron microscopy, and energy-dispersive X-ray spectroscopy to characterize the Ni surface precipitates formed. Evidence from these techniques pointed to the formation of mixed Ni carbonate-Ni hydroxide amorphous surface precipitates. On calcite, XPS detected primarily Ni(OH) 2 despite the initial solutions being more supersaturated with respect to gaspéite (NiCO 3 ) than to theophrastite (Ni(OH) 2 ) by a factor of 17–18. In contrast, NiCO 3 was the dominant component detected by XPS on magnesite in the same conditions. Decreasing the temperature had the effect of increasing the proportion of NiCO 3 to the detriment of Ni(OH) 2 . The experimental observations were consistent with low lattice/cation size mismatch favoring NiCO 3 nucleation and temperature most influencing Ni(OH) 2 nucleation. Comparison to previous work on Co-reacted powders indicated the differences in lattice/cation size mismatch and/or water exchange rate impacted the composition of the surface precipitates more than the relative thermodynamic stabilities of the competing minerals. This work explored the heterogeneous growth regime of Ni carbonate and hydroxide phases on carbonate surfaces and shed light on the factors that control the competition between surface precipitates when mineral surfaces are in contact with aqueous solutions supersaturated with respect to multiple mineral phases. In conclusion, these results contribute to geochemists’ efforts toward interpreting data from geochemical systems with elevated Ni concentrations, improving Ni environmental remediation and recovery strategies, and predicting the fate and transport of Ni in geochemical systems.

Heterogeneous nucleation↗
DOE OSTI2024

Design and Analysis of Liquid Lithium Plasma Facing Components

In this study, liquid metal (LM) on plasma-facing components (PFCs) creates a renewable protective cover enhancing power exhaust and protecting the solid substrate. Additionally, energy confinement improvement through particle pumping can be achieved in the case of liquid lithium (LL). A new variant of PFCs was recently introduced at Princeton Plasma Physics Laboratory (PPPL) where a porous wall is used to stabilize the LM surface, while using magnetohydrodynamic (MHD) drive to push the LM flow inside the component. This arrangement allows efficient heat exhaust, and enhanced control of the LM surface temperature, leading to spatial control of evaporation and condensation of LL on the plasma interface. This feature is particularly attractive when vapor shielding is introduced to allow heat flux redistribution. This system has the advantage that as the heat flux increases, the evaporation rate will increase, while decreasing heat flux will decrease the evaporation rate of lithium, ideally creating a feedback effect which could self-regulate the amount of lithium evaporated. Analytical and numerical models for LL PFCs were developed in PPPL. To calculate the target temperature distribution for the case of evaporation from the divertor, we apply an iterative process allowing two-way coupling between the fluid-kinetic analysis of plasma using SOLPS-ITER code and the flow and heat transfer analysis of the PFC using an analytical model. In the last stage, the results are validated using computational fluid dynamics (CFD) analysis with customized version of the CFX code from ANSYS. CFX was modified at PPPL to allow MHD analysis at the high magnetic field typical for fusion applications. Results of the analysis for NSTX-U tokamak conditions will be presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Microkinetic Modeling: A Tool for Rational Catalyst Design

The design of heterogeneous catalysts relies on understanding the fundamental surface kinetics that controls catalyst performance, and microkinetic modeling is a tool that can help the researcher in streamlining the process of catalyst design. Microkinetic modeling is used to identify critical reaction intermediates and rate-determining elementary reactions, thereby providing vital information for designing an improved catalyst. In this review, we summarize general procedures for developing microkinetic models using reaction kinetics parameters obtained from experimental data, theoretical correlations, and quantum chemical calculations. We examine the methods required to ensure the thermodynamic consistency of the microkinetic model. We describe procedures required for parameter adjustments to account for the heterogeneity of the catalyst and the inherent errors in parameter estimation. We discuss the analysis of microkinetic models to determine the rate determining reactions using the degree of rate control and reversibility of each elementary reaction. We introduce incorporation of Brønsted–Evans–Polanyi relations and scaling relations in microkinetic models and the effects of these relations on catalytic performance and formation of volcano curves. We review the analysis of reaction schemes in terms of the maximum rate of elementary reactions, and we outline a procedure to identify kinetically significant transition states and adsorbed intermediates. Here, we explore the application of generalized rate expressions for the prediction of optimal binding energies of important surface intermediates and to estimate the extent of potential rate improvement. We also explore the application of microkinetic modeling in homogeneous catalysis, electro-catalysis, and transient reaction kinetics. We conclude by highlighting the challenges and opportunities in the application of microkinetic modeling for catalyst design.

42 ENGINEERING↗
DOE OSTI2020

Three-Dimensional Patterning of Nanoparticles by Molecular Stamping

Directing the formation of nanoscale architectures from nanoparticles is one of the key challenges in designing nanomaterials with prescribed functions. Atomic systems, given their ability to form molecules and crystals via directional chemical bonds, provide an inspiration for establishing approaches where nanoparticles with designed anisotropic binding modalities can be assembled into nanoscale architectures. However, fabricating such nanoparticles has been challenging due to their small dimensions and limited ways for site-specific control of their surface. To this end, we present a Molecular Stamping (MOST) approach to pattern DNA-coated nanoparticles with molecules at the predefined positions on a nanoparticle surface. This patterning is realized by use of a rigid and coordinative DNA frame as a molecular stamping apparatus (MOST App). The MOST App transfers multiple types of molecular “inks”, DNA sequences, onto nanoparticle surface and fixes these molecular inks into place to form a designed pattern. After a nanoparticle release from MOST App, it possesses single-molecule patches that can provide anisotropic bonds with distinctive affinities. We further use these stamped nanoparticles to assemble prescribed clusters, whose structure is determined by the locations of patches. Using electron microscopy and tomographic methods, we investigate the efficiency of cluster formation and the resulting spatial arrangements of nanoparticles. The presented approach provides a single-molecule and spatiallydetermined control over nanoparticle functionalization for creating nanoparticles with designed placement of different molecules and for realizing a rational fabrication of nanomaterial architectures.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2025

Support modification by phosphonic acid ligands controls ethylene hydroformylation on single-atom rhodium sites

To investigate the ability of surface-bound ligands to control activity toward ethylene hydroformylation, we modified site-isolated Rh 1 /TiO 2 with a series of substituted benzyl phosphonic acids. We found that modification of the support by phosphonic acids reduced break-in times for hydroformylation by 4× and increased absolute hydroformylation activity by up to 18× compared to unmodified catalyst at 150 °C. All functionalized catalysts improved hydroformylation activity by at least 9× and improved selectivity by between 7× and 60× relative to the unmodified catalyst. Carbon monoxide probe–molecule spectroscopy indicated that the enhancements in activity among modified samples were due to changes in the local environment of the active Rh site. Specifically, the bite angle of adsorbed carbon monoxide, as determined from infrared spectra, correlated with hydroformylation activity. These findings demonstrate that Rh 1 active sites are highly sensitive to modification of the support with organic ligands.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Quaternary slip rates and most recent surface rupture of the Bitterroot fault, western Montana

The Bitterroot fault is a ~100-km-long Quaternary active normal fault that bounds the eastern margin of the north–south-trending Bitterroot Mountains and accommodates extension near the Intermountain Seismic Belt. Here, new detailed mapping using high-resolution topographic data derived from light detection and ranging (lidar) along the southern Bitterroot Range documents multiple generations of fault scarps in Holocene–Pleistocene deposits with vertical off sets that increase in magnitude with age. Fault mapping indicates a complex fault geometry characterized by an en echelon pattern of discontinuous segments of 41–78° east-dipping normal faults that appear to cut the older Eocene detachment fault, and locally 70–88° west-dipping antithetic normal faults. 10 Be cosmogenic exposure dating provides in situ age control for 32 surface boulders (>1 m) sampled in glacial deposits. Near Como Dam, two Pinedale-age glacial moraine sequences yield peak age distributions of 15.0 ± 0.4 ka and 16.4 ± 0.6 ka as apparent exposure ages (e = 0), and 15.4 ± 0.4 ka and 16.8 ± 0.6 ka based on the maximum allowed boulder surface erosion rate (e = 2 mm/ka). Vertical separation of 3.5 ± 0.2 m across the ~16–17 ka glacial moraine off set by the Bitterroot fault scarp yields a fault slip rate of 0.2–0.3 mm/yr. Glacial Lake Missoula highstand shorelines, inset into the ~15 ka glacial moraine and vertically off set 4.6 ± 1.6 m by an antithetic strand of the Bitterroot fault, yield fault slip rates of 0.2–0.5 mm/yr that overlap with fault slip rates on the main strand near Lake Como (0.2–0.3 mm/yr). At the Ward Creek fan located ~15 km to the north of Lake Como, two glacial debris fan sequences yield peak age distributions of 16.6 ± 0.4 ka and 62.8 ± 1.7 ka (e = 0), and 17.0 ± 0.4 ka and 69.9 ± 2.2 ka (e = 2 mm/ka). Vertical separations of 2.4 ± 0.3 m and 4.5 ± 0.2 m on the ~17 ka and ~63–70 ka fan surfaces off set by the Bitterroot fault yield fault slip rates of 0.2–0.3 mm/yr and 0.1 mm/yr, respectively. Our results indicate broadly consistent fault slip rates for the main fault segments at Lake Como (0.2–0.3 mm/yr) and the Ward Creek fan (0.1–0.3 mm/yr) with an along-strike range of 0.1–0.3 mm/yr for the southern Bitterroot fault. Fault scaling relations and evidence of multiple late Quaternary fault surface ruptures suggest the Bitterroot fault could produce a Mw ~7.2 earthquake. Structural model constraints and our slip rate results indicate both high-angle or low-angle fault geometries are possible at depth. A seismogenic low-angle fault model could generate a larger earthquake of Mw >7.2. Earthquake history is unknown for the Bitterroot fault, but fault scarps in young glacial deposits demonstrate its seismogenic potential. Data from this study suggest seismic hazards from the Bitterroot fault may pose a high level of risk to the Missoula metropolitan area, the State’s second most populous region, and major infrastructures across the Missoula and Bitterroot Valleys.

58 GEOSCIENCES↗
DOE OSTI2024

An integrated experimental–modeling approach to identify key processes for carbon mineralization in fractured mafic and ultramafic rocks

Abstract Controlling atmospheric warming requires immediate reduction of carbon dioxide (CO2) emissions, as well as the active removal and sequestration of CO2 from current point sources. One promising proposed strategy to reduce atmospheric CO2 levels is geologic carbon sequestration (GCS), where CO2 is injected into the subsurface and reacts with the formation to precipitate carbonate minerals. Rapid mineralization has recently been reported for field tests in mafic and ultramafic rocks. However, unlike saline aquifers and depleted oil and gas reservoirs historically considered for GCS, these formations can have extremely low porosities and permeabilities, limiting storage volumes and reactive mineral surfaces to the preexisting fracture network. As a result, coupling between geochemical interactions and the fracture network evolution is a critical component of long-term, sustainable carbon storage. In this paper, we summarize recent advances in integrating experimental and modeling approaches to determine the first-order processes for carbon mineralization in a fractured mafic/ultramafic rock system. We observe the critical role of fracture aperture, flow, and surface characteristics in controlling the quantity, identity, and morphology of secondary precipitates and present where the influence of these factors can be reflected in newly developed thermo-hydro-mechanical–chemical models. Our findings provide a roadmap for future work on carbon mineralization, as we present the most important system components and key challenges that we are overcoming to enable GCS in mafic and ultramafic rocks.

58 GEOSCIENCES↗
DOE OSTI2024

Abrasive Waterjet Machining

The abrasive waterjet machining process was introduced in the 1980s as a new cutting tool; the process has the ability to cut almost any material. Currently, the AWJ process is used in many world-class factories, producing parts for use in daily life. A description of this process and its influencing parameters are first presented in this paper, along with process models for the AWJ tool itself and also for the jet–material interaction. The AWJ material removal process occurs through the high-velocity impact of abrasive particles, whose tips micromachine the material at the microscopic scale, with no thermal or mechanical adverse effects. The macro-characteristics of the cut surface, such as its taper, trailback, and waviness, are discussed, along with methods of improving the geometrical accuracy of the cut parts using these attributes. For example, dynamic angular compensation is used to correct for the taper and undercut in shape cutting. The surface finish is controlled by the cutting speed, hydraulic, and abrasive parameters using software and process models built into the controllers of CNC machines. In addition to shape cutting, edge trimming is presented, with a focus on the carbon fiber composites used in aircraft and automotive structures, where special AWJ tools and manipulators are used. Examples of the precision cutting of microelectronic and solar cell parts are discussed to describe the special techniques that are used, such as machine vision and vacuum-assist, which have been found to be essential to the integrity and accuracy of cut parts. The use of the AWJ machining process was extended to other applications, such as drilling, boring, milling, turning, and surface modification, which are presented in this paper as actual industrial applications. To demonstrate the versatility of the AWJ machining process, the data in this paper were selected to cover a wide range of materials, such as metal, glass, composites, and ceramics, and also a wide range of thicknesses, from 1 mm to 600 mm. The trends of Industry 4.0 and 5.0, AI, and IoT are also presented.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Surface chlorination of IrO2(110) by HCl

The ability to controllably chlorinate metal-oxide surfaces can provide opportunities for designing selective oxidation catalysts. In the present study, we investigated the surface chlorination of IrO2(110) by HCl using temperature programmed reaction spectroscopy (TPRS), x-ray photoelectron spectroscopy (XPS), and density functional theory (DFT) calculations. We find that exposing IrO2(110) to HCl, followed by heating to 650 K in ultrahigh vacuum, produces nearly equal quantities of on-top and bridging Cl atoms on the surface, Clt and Clbr, where the Clbr atoms replace O-atoms that are removed from the surface by H2O formation. After HCl adsorption at 85 K, only H2O desorbs at low Cl coverages during TPRS, but HCl begins to desorb in increasing yields as the Cl coverage is increased above about 0.5 monolayer (ML). The desorption of Cl2 was not observed under any conditions, in good agreement with the high barrier for this reaction predicted by DFT. A maximum Cl coverage of 1 ML, with nearly equal coverages of Clt and Clbr atoms, could be generated by reacting HCl with IrO2(110) in UHV. Our results suggest that a kinetic competition between recombinative HCl and H2O desorption under the conditions studied limits the saturation Cl coverage to a value less than the 2 ML maximum predicted by thermodynamics. XPS further shows that the partitioning of Cl between the Clt and Clbr states can be altered by subjecting partially chlorinated IrO2(110) to reductive or oxidative treatments, demonstrating that the Cl site population can change dynamically in response to the gas environment. Our results provide insights for understanding the chlorination of IrO2(110) by HCl and can enable future experimental studies to determine how Cl-modification alters the surface chemical reactivity of IrO2(110) and potentially enhances selectivity toward partial oxidation chemistry.

Chemistry↗
DOE OSTI2020

Engineering Edge States of Graphene Nanoribbons for Narrow-Band Photoluminescence

Solid-state narrow-band light emitters are on-demand for quantum optoelectronics. Current approaches based on defect engineering in low-dimensional materials usually introduce a broad range of emission centers. Here, we report narrow-band light emission from covalent heterostructures fused to the edges of graphene nanoribbons (GNRs) by controllable on-surface reactions from molecular precursors. Two types of heterojunction (HJ) states are realized by sequentially synthesizing GNRs and graphene nanodots (GNDs) and then coupling them together. HJs between armchair GNDs and armchair edges of the GNR are coherent and give rise to narrow-band photoluminescence. In contrast, HJs between the armchair GNDs and the zigzag ends of GNRs are defective and give rise to nonradiative states near the Fermi level. At low temperatures, sharp photoluminescence emissions with peak energy range from 2.03 to 2.08 eV and line widths of 2–5 meV are observed. Furthermore, the radiative HJ states are uniform, and the optical transition energy is controlled by the band gaps of GNRs and GNDs. As these HJs can be synthesized in a large quantity with atomic precision, this finding highlights a route to programmable and deterministic creation of quantum light emitters.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Etching-Chemistry-Driven Ruthenium Doping on Ti 3 C 2 T x MXene for Optimizing Electrochemical Performance

We demonstrate that the etching chemistry used during MXene synthesis from Ti 3 AlC 2 MAX phase significantly influences surface functionalization and structural vacancies, which in turn affect ruthenium (Ru) ion interactions. Using hydrofluoric acid (HF) and ammonium bifluoride (NH 4 HF 2 ) as etchants, we obtained MXene surfaces with distinct functional groups and Ti vacancies that impact Ru ion interactions and electrochemical performance. Both MXene variants (labeled MX(H) and MX(N), respectively) exhibited negative zeta potentials in their pristine state, but upon the addition of Ru the zeta potential for MX(H) reached 12.9 mV while that for MX(N) remained negative at −6.4 mV. This adsorption resulted in a 14.4-fold increase in the specific capacitance of MX(H)/Ru compared to pristine MX(H), whereas MX(N)/Ru exhibited only a 4.4-fold increase over its pristine counterpart. X-ray diffraction analysis identified the formation of ammonium titanium oxide fluoride, (NH 4 ) 3 TiOF 5 , on MX(N), which likely contributed to its reduced Ru adsorption. X-ray photoelectron spectroscopy suggested the presence of Ti vacancies in both MXene variants; however, their behavior toward Ru accommodation differed markedly, with MX(H) showing the most obvious shift in the Ti 2p peak in the XPS survey spectrum, while MX(N) showed the most obvious shift in the C 1s peak. Electron paramagnetic resonance spectroscopy further demonstrated a distinct alteration in the spectral signatures of MX(H) upon Ru addition, in contrast to the negligible changes in MX(N), indicating effective passivation of the Ti defect sites in MX(H) via vacancy-assisted Ru doping. Cyclic voltammetry showed that Ru-incorporated MX(H) nanocomposites exhibit more efficient redox-active sites, as reflected in their higher capacitance values. These findings highlight the pivotal role of MXene surface chemistry in controlling cation adsorption, providing valuable insights for the rational design of high-performance electrodes.

2D surface engineering↗