Search NASA⌕ Search

SEARCH · Search NASA

Results for “INSULATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Electrical readout of topological spin order in ultrathin insulators with small magnetization

Probing magnetic order in insulators with small magnetization is particularly challenging in the ultrathin limit, where magnetometry and diffraction lose sensitivity. Here, in this study, we show that topological spin order with vanishingly small magnetization can be electrically detected through an interfacial topological Hall effect in heavy-metal/magnetic-insulator heterostructures. Using Pt coupled to the canted antiferromagnetic insulator hexagonal LuFe⁢O 3 (h-LuFe⁢O 3 ) we observe an unusually large and robust Hall response arising from the transfer of real-space spin topology across the interface via magnetic proximity effect (MPE). This interfacial signal enables detection of magnetic order in h-LuFe⁢O 3 with an extremely small net magnetization (0.025 𝜇 B /Fe), corresponding to Hall-conductivity-magnetization ratio ≈ 2 V −1 , which is one to two orders of magnitude large than other MPE-induced Hall effects and anomalous Hall effects of conducting magnets. This high sensitivity allows detection of magnetic order in h-LuFe⁢O 3 down to a thickness of only 1.5 unit cells. Our results establish an interfacial Hall-based approach for electrically probing topological spin structures in ultrathin insulators and the related interfaces, enabling access to magnetic order in regimes where conventional probes fail.

Topological Hall Effect↗
DOE OSTI2025

Symmetry breaking forms split-off flat bands in quantum oxides controlling metal versus insulator phases

The crystal structure used as input to electronic structure calculation of conventionally bonded solids consists primarily of the standard crystallographic degrees of freedom. Quantum solids sometimes have additional microscopic degrees of freedom (m-DOF) nested within the crystallographic structure. These might include local motifs including positional (Peierls dimers, deformed octahedra, Jahn-Teller distortions), magnetic (local moment configurations) and dipolar (local ferroelectric configurations). Such motifs can be observed experimentally via local probes that avoid averaging, and theoretically as distinct total energy lowering features relative to more simplified “average crystallographic structures”. Here we examine the ability of electronic structure methods independent of strong correlation physics to explain the broad phenomenology of metal-insulator selectivity in quantum oxides by energy-lowering symmetry breaking. We do this by avoiding the restriction of considering only (i) electron-electron interactions in a fixed unresponsive lattice—as done in Mott strong correlation explanations—allowing, however, (ii) local positional and magnetic motifs that coexist within a crystallographic landscape. We find in a broad range of quantum oxides with different symmetry breaking modes the formation of split-off flat bands that can also control metallic versus insulating characteristics. The split-off band effect is common to magnetic and non-magnetic materials, including both binary and ternary oxides. One finds that when such local symmetry breaking motifs are considered in mean-field-like (e.g. density functional theory) electronic structure calculations of quantum oxides, they explain many of the observed trends in metal vs insulator phases discussed otherwise in prior literature via strong correlation in symmetry unbroken view.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Comparison of Nb 3 Sn Insulation Systems With as Received and De-Sized Glass

Epoxy cracking has been the main suspected contributor to training in Nb 3 Sn magnets for some time, as it leads to energy release and magnet quenching. Cracking in a superconducting composite can occur from several modes, and the likelihood of these modes is not well understood. Failure has been observed between insulation systems and the superconducting cable itself rather than within the cable or insulation. To target the behavior at the interface, samples have been fabricated and tested for Mode I fracture toughness in an adapted version of ASTM D5528. This work seeks to better characterize the fracture toughness of this interface to better understand how to model and design insulation systems.

Krave, Steven T. [Fermilab] (ORCID:000000021752145↗
DOE OSTI2025

Inexpensive Superinsulation for Cryogenic and Highly Insulating Applications (CRADA Final Report)

This effort will use our novel insulation formed into effective “solid” (as compared to powder) insulating panels and/or wraps to demonstrate important technical achievements including scaling appropriate crosslinking to directly and cost effectively address vacuum insulated panel (VIP) applications and cryogenic component wrapping to help reduce energy use. This project will improve and scale-up processes (from 3” diameter disks) to make larger samples (e.g., 12” x 12” x 1”) Wow, cfor external evaluation and testing.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Ultra-clear Aerogels for Insulated Glass in Refrigeration Doors (CRADA Final Report)

Display refrigerators commonly employ glass doors to provide product visibility; however, these doors exhibit significantly poorer thermal insulation than solid doors, resulting in increased heat transfer and higher energy consumption. To address this limitation, this project investigated the use of silica aerogel as a transparent insulating medium for refrigerator glass doors, with the objective of enhancing thermal performance without compromising visual clarity. In Phase I of the project, we assessed the feasibility of silica aerogel insulation through laboratory and full-scale studies, including material characterization, durability testing, and heat transfer measurements, along with the development and performance evaluation of prototype glass doors under realistic operating conditions. In Phase II, the project focused on scaling the technology toward practical deployment. This included scaling up the manufacturing process to achieve a surface area roughly 20 times larger for commercial applications, developing full-scale prototypes that integrated silica aerogel into standard display refrigerator doors, and conducting field evaluations to assess thermal performance, energy savings, and operational durability under real-world conditions.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

Guarded Hot Cylinder Apparatus for Characterization of Thermal Insulation Systems and Materials at Liquid Hydrogen Temperatures

As interest in liquid hydrogen (LH2) continues to grow within the energy and mobility sectors, so does the demand for testing capabilities at deep cryogenics temperatures. However, cost-, complexity-, and safety-related challenges associated with handling LH2 effectively limit the landscape of possible options. As an alternative, LH2 temperatures can be accessed via a helium-based cryogenic refrigerator, or “cryocooler”. Recently, NASA and its partners CB&I and Shell began the development of a cryocooler-based calorimeter to characterize the thermal performance of insulations and other materials down to 20 K. Deemed the Guarded Hot Cylinder (GHC), the apparatus utilizes a small vacuum chamber in conjunction with a GM cryocooler and trim heater to control the cold boundary temperature. A sealed, cylindrical copper cup bolts to the cryocooler and houses the material specimen, with an internal, cylindrical test heater assembly to maintain the warm boundary. The steady-state heat load, traveling radially through the specimen, is measured via the electrical input power to the test heater and then used to evaluate the material’s absolute thermal performance. Initial checkout and validation of the GHC using a common bulk-fill insulation material showed close agreement with published data from standardized LN2 boiloff calorimetry testing. The instrument is now considered a lab standard, with the goal of incorporating it into the ASTM C1774 standard in the future, and it is in continuous use, examining insulation materials for next-generation LH2 applications.

Swanger, Adam (ORCID:000000021487592X)↗
DOE OSTI2026

Assess The Water Resistance And Thermal Performance Of Pre-flashing Methods When Adding Continuous Insulation During Re-siding (AIRS)

Retrofitting existing buildings by adding continuous insulation during re-siding projects has become a popular method for enhancing energy efficiency, especially given the aging building stock and stricter energy codes. When properly integrated with existing window systems, continuous insulation can significantly improve thermal performance, but it also presents challenges related to water resistance and building envelope integrity. Research indicates that the interface between windows and wall assemblies is critical as improper installation or sealing can lead to water intrusion, materials deterioration, and energy loss. Moreover, studies show that fully integrating the windows with the insulation layer can reduce window heat loss by up to 40%, emphasizing the importance of optimizing window placement and sealing during retrofitting to ensure both energy efficiency and structural performance. In this study, we conducted experimental tests to evaluate the water penetration and thermal performance of two window types: an aluminum window with a 2-inch installation fin and a wood window, representing typical mid-20th century designs. Using the Heat, Air, and Humidity (HAM) chamber at Oak Ridge National Laboratory (ORNL), we assessed bulk water penetration and performed COMSOL analysis for thermal flux and examined the effectiveness of different pre-flashing methods, i.e., standard self-adhered flashing tape and high-performance flashing tape with low-expansion foam, to enhance water resistance. The results indicate that applying proper flashing techniques and moisture management strategies can mitigate these risks, improving the overall performance and durability of retrofitted buildings. Additionally, proper sealing during retrofitting is essential, as improper installation can lead to moisture issues that compromise both energy efficiency and structural integrity.

Shen, Zhenglai [ORNL]↗
NASA NTRS1965

Soluble undercoating facilitates removal of foamed-in-place insulation

Foamed-in-place insulation can be removed and reused by coating the surface with a soluble peel coat before applying the foam mixture. Removal of the insulation is effected by slitting it and pouring a solvent in the slit to dissolve the peel coat. The insulation can then be stripped off intact.

Duncan, A. C.↗
NASA NTRS1969

Liquid oxygen-compatible insulation system

To provide insulation for tees, elbows, sumps, and valves that are used to pass or store fluids at cryogenic temperatures, individual parts are insulated in an environmentally controlled facility. It is desirable that such insulation be liquid oxygen compatible and be easily removable and reinstallable.

Jones, J. S.↗
NASA NTRS1971

Manufacturing developments in insulation application

Manufacturing development studies have been conducted to provide information on the fabrication and handling characteristics of a number of candidate multilayer insulation systems. The application of these complex, lightweight insulation systems to large-scale, flight-type cryogenic tankage and other structures has of necessity required the development of new methods, processes, and tooling concepts. Results of some of the studies that have contributed to the advancement of cryogenic technology are presented. The insulation systems that are of primary importance for future application are those using the sliced foam spacers, the net type spacers, the glass fiber paper spacers, and the Superfloc system which consists of tufts of dacron fibers flocked on the surface of the radiation shields.

Yates, I. C., Jr.↗
NASA NTRS1972

Development of an external ceramic insulation for the space shuttle orbiter

The development and evaluation of a family of reusable external insulation systems for use on the space shuttle orbiter is discussed. The material development and evaluation activities are described. Additional information is provided on the development of an analytical micromechanical model of the reusable insulation and the development of techniques for reducing the heat transfer. Design data on reusable insulation systems and test techniques used for design data generation are included.

Tanzilli, R. A.↗
NASA NTRS1972

Measurement of apparent thermal conductivity of multilayer insulations at low compressive loads.

A description is presented of the test calorimeter, the experimental technique, and the results obtained in an evaluation of four multilayer insulations selected for application on future multilaunch space vehicles utilizing liquid hydrogen and oxygen for orbital operations. Particular attention is paid to techniques for minimizing error in obtaining thermal conductivity data. The effective conductivity for four high-performance insulations was determined at a minimum of four compressive loads in the range from 0.0001 to 0.1 psi. Results show that the thermal conductivity of multilayer insulations is insensitive to small changes in mechanical loading at 1 torr interstitial gas pressure, but becomes increasingly more sensitive to mechanical loading as the interstitial gas pressure is reduced.

Holmes, V. L.↗
NASA NTRS1972

Cryogenic insulation development

Multilayer insulations for long term cryogenic storage are described. The development effort resulted in an insulation concept using lightweight radiation shields, separated by low conductive Dacron fiber tufts. The insulation is usually referred to as Superfloc. The fiber tufts are arranged in a triangular pattern and stand about .040 in. above the radiation shield base. Thermal and structural evaluation of Superfloc indicated that this material is a strong candidate for the development of high performance thermal protection systems because of its high strength, purge gas evacuation capability during boost, its density control and easy application to a tank.

Leonhard, K. E.↗
NASA NTRS1972

High temperature insulation materials for reradiative thermal protection systems

Results are presented of a two year program to evaluate packaged thermal insulations for use under a metallic radiative TPS of a shuttle orbiter vehicle. Evaluations demonstrated their survival for up to 100 mission reuse cycles under shuttle acoustic and thermal loads with peak temperatures of 1000 F, 1800 F, 2000 F, 2200 F and 2500 F. The specimens were composed of low density refractory fiber felts, packaged in thin gage metal foils. In addition, studies were conducted on the venting requirements of the packages, salt spray resistance of the metal foils, and the thermal conductivity of many of the insulations as a function of temperature and ambient air pressure. Data is also presented on the radiant energy transport through insulations, and back-scattering coefficients were experimentally determined as a function of source temperature.

Hughes, T. A.↗
NASA NTRS1972

Development of automatic through-insulation welding for microelectric interconnections

The capability to automatically route, remove insulation from, and weld small-diameter solid conductor wire is presented. This would facilitate the economical small-quantity production of complex miniature electronic assemblies. An engineering model of equipment having this capability was developed and evaluated. Whereas early work in the use of welded magnet wire interconnections was concentrated on opposed electrode systems, and generally used heat to melt the wire insulation, the present method is based on a concentric electrode system and a wire feed system which splits the insulation by application of pressure prior to welding. The work deals with the design, fabrication, and evaluation testing of an improved version of this concentric electrode system. Two different approaches to feeding the wire to the concentric electrodes were investigated. It was concluded that the process is feasible for the interconnection of complex miniature electronic assemblies.

Arnett, J. C.↗
NASA NTRS1972

Improvement of Reusable Surface Insulation (RSI) materials

The mullite fiber based hardened compacted fibers (HCF) type of reusable surface insulation was further developed for use in the Space Shuttle Program. Two hundred fifty formulations of fiber mixtures, fillers, binders, and organic processing aids were made using mullite fibers as the basic ingredient. Most of the work was accomplished on 15-lb/cu ft material. It was established that higher density materials are stronger with strength values as high as 250 lb/sq in. in tension. New measurement techniques and equipment were developed for accurate determination of strength and strain to failure. Room temperature to 2300 F stress-strain relationships were made. The room temperature tensile modulus of elasticity is 61,700 lb/sq in. and the strain at failure is 0.165 percent, typically, when measured longitudinally parallel to the long axes of the fibers. Thermal insulating effectiveness was increased 20 percent by reducing the diameter of some of the fibers in the material. Improvements were made in density uniformity and strength uniformity in a block of HCF by mixing improvements and by the use of organic additives. Specifications were established on the materials and processes used in making the insulation.

Blome, J. C.↗
NASA NTRS1973

Effect of environment on insulation materials, volume 1

Twenty candidate multilayer insulation and insulation related materials were subjected to eight conditions that represent possible operational environments. These exposures include ground contaminants, various operational temperatures, space vacuum, space-vented propellants, and tank leakage. The objective of this program was to obtain and evaluate the data from these exposures to provide both a quantitative and qualitative description of the degradation to certain physical and thermal properties, and from this, to obtain a better understanding of the environmental effects on the insulation performance.

Parmley, R. T.↗
NASA NTRS1973

Internal insulation system development

The development of an internal insulation system for cryogenic liquids is described. The insulation system is based on a gas layer concept in which capillary or surface tension effects are used to maintain a stable gas layer within a cellular core structure between the tank wall and the contained cryogen. In this work, a 1.8 meter diameter tank was insulated and tested with liquid hydrogen. Ability to withstand cycling of the aluminum tank wall to 450 K was a design and test condition.

Gille, J. P.↗