Coupled dynamics of iron and iron-bound organic carbon in forest soils during anaerobic reduction
Not provided.
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Not provided.
This project primarily sought to address some of the computational cost concerns of detailed simulations by developing improved methods of handling species transport, and chemical kinetics evaluation in a commercial 3D Computational Fluid Dynamics (CFD) environment. Secondary goals were to apply these techniques to fuels and conditions of interest to better understand the key species and reactions required to adequately capture cycle to cycle coupling. Improved modeling will lead to better understanding of these combustion modes and their dependence on fuel composition, which can then enable more clean and efficient engines, ultimately benefiting the consumer as well as the general public. Two approaches were used to address the computational cost. A “Dynamic Species Reduction” (DSR) procedure was developed to remove chemical species from the simulation during periods when chemical reactions were not expected to be important, particularly during gas exchange when temperatures are low and little fuel remains. This modelling procedure automatically detects relevant species to retain in the simulation domain based on their local concentration, removes species below a specified concentration threshold, and then adjusts the remaining species mass to conserve not only the number of H, C, and O atoms in each cell, but also the relative proportions between species and the heating value of the mixture in every cell. The second procedure was a “Product Directed Remapping” (PDR) updates the algorithm used to group individual computational cells for chemical kinetics evaluation to account for non-uniform temperature distributions and the CO to CO 2 ratio in the cells. The model techniques developed in this work successfully demonstrated computational performance improvements for a range of conditions relevant for Highly Dilute SI and HCCI engine operation. Runtime reductions of 10% were observed for small mechanisms, with further reductions of up to 36% observed for larger mechanisms. Improvements were primarily related to reducing the number of chemical species tracked during the gas exchange process using the Dynamic Species Reduction method. With smaller benefits observed from changes to the kinetics binning and evaluation strategy in the post combustion region using the PDR method. The results of this work show the potential for improved computational runtime for complicated simulations. They can and should be extended to additional conditions and new bio-derived and renewable fuels as they are developed and new kinetic mechanisms become available.
A set of numerical tools for the analysis and dynamic dimension reduction of chemical vapor and atomic layer deposition (ALD) surface reaction models is developed in this work. The approach is based on a two-step process where in the first, the chemical species surface balance dynamic equations are factored to effectively decouple the (nonlinear) reaction rates, a process that eliminates redundant dynamic modes and that identifies conserved quantities. If successful, the second phase is implemented to factor out redundant dynamic modes when species relatively minor in concentration are omitted; if unsuccessful, the technique points to potential model structural problems. An alumina ALD process is used for an example consisting of 19 reactions and 23 surface and gas-phase species. Using the approach developed, the model is reduced by nineteen modes to a four-dimensional dynamic system without any knowledge of the reaction rate values. Results are interpreted in the context of potential model validation studies.
No longer necessary to solve eigenvalue problems of high order. Component-mode projection-and-assembly model-reduction (COMPARE) method provides approximation of dynamics of vibrations of complicated, multiple flexible bodies by use of mathematical models of reduced order. Incorporates component-mode synthesis (CMS) method and enhanced projection-and-assembly (EP&A) method, described in "Enhanced Method of Reduction of Dynamical Models" (NPO-18402), providing for somewhat simplified two-stage process in which order of applicable mathematical models reduced. Reduced-order models used to design algorithms of control systems to suppress vibrations or otherwise control structure.
The increasing complexity of power system has made it difficult to simulate large-scale power system in detail. Therefore, to improve computational efficiency, model reduction techniques has been applied to reduce the external area and focus on the dynamics of the internal area. This paper proposes a measurement-based model reduction method which reduces the external system by replacing external system with ARX equivalents. The modeled transfer function parameters are obtained using system identification approach. Case studies on the NPCC system and EI system are carried out. Results show that the proposed reduction method can effectively retain the dynamic behavior of the study area while mitigating computation burden.
In this work, we examine the dynamics of skyrmions in systems with a region of strong pinning coexisting with a pin-free region, where the equilibrium state has a uniform skyrmion density. Under an applied drive, skyrmions accumulate in the pin-free region along the edge of the pinned region due to the skyrmion Hall effect. As the drive increases, a series of dynamical structural transitions occur in the flowing skyrmion lattice similar to those observed in the compression dynamics of crystals. These transitions correspond to reductions in the number of flowing rows of skyrmions due to the collective motion of the skyrmions into the pinned region, and they are accompanied by a series of steps in the velocity force curves leading to a negative differential conductivity. When the number of pinning sites is sufficiently large, a drive-induced pinning effect can occur in which the skyrmion Hall effect forces all of the skyrmions to enter the strongly pinned region. This reentrant pinning effect becomes more pronounced for increasing intrinsic skyrmion Hall angle and larger pinning sites.
General methods are described by which the mathematical complexities of explicit and exact state equations of robot arms can be reduced to a simplified and compact state equation representation without introducing significant errors into the robot arm dynamic model. The model reduction methods are based on homogeneous coordinates and on the Langrangian algorithm for robot arm dynamics, and utilize matrix, vector and numeric analysis techniques. The derivation of differential vector representation of centripetal and Coriolis forces which has not yet been established in the literature is presented.
Computational procedures are presented for evaluating the sensitivity derivatives of the vibration frequencies and eigenmodes of framed structures. Both a displacement and a mixed formulation are used. The two key elements of the computational procedure are: (a) Use of dynamic reduction techniques to substantially reduce the number of degrees of freedom; and (b) Application of iterative techniques to improve the accuracy of the derivatives of the eigenmodes. The two reduction techniques considered are the static condensation and a generalized dynamic reduction technique. Error norms are introduced to assess the accuracy of the eigenvalue and eigenvector derivatives obtained by the reduction techniques. The effectiveness of the methods presented is demonstrated by three numerical examples.
High computational cost and storage/memory requirements of fluid dynamics simulations constrain their usefulness as a predictive tool. Reduced-order models (ROMs) provide a viable solution to this challenge by extracting the key underlying dynamics of a complex system directly from data. We investigate the efficacy and robustness of an extended dynamic mode decomposition (xDMD) algorithm in constructing ROMs of three-dimensional cardiovascular computations. Focusing on the ROMs' accuracy in representation and interpolation, we relate these metrics to the truncation rank of singular value decomposition, which underpins xDMD and other approaches to ROM construction. Our key innovation is to relate the truncation rank to the singular values of the original flow problem. This result establishes a priori guidelines for the xDMD deployment and its likely success as a means of data compression and reconstruction of the system's dynamics from dominant spatiotemporal structures present in the data.
Interconnected power systems have experienced a significant increase in its size and complexity, due to continuous topology and operating condition changes. It is computationally burdensome to represent entire system models in detail to conduct power system analysis. In the large-scale power system dynamic simulations, the models in the study area need to be retained in detail while the external area can be reduced without compromising accuracy, which can preserve the full system dynamic properties. This paper develops measurement-based continuous-time dynamic equivalents for power systems in order to both improve the model accuracy of the reduced system and increase the speed of dynamic simulation. Our method is based on a set of measurements at the boundary nodes between the study area and external area. Case studies demonstrate that the measurement-based model can capture the full system behavior sufficiently, and improve computational efficiency.Interconnected power systems experienced a significant increase in size and complexity. It is computationally burdensome to represent the entire system in detail to conduct power system analysis. Therefore, the model of the study system must be retained in detail while the external system can be reduced using system reduction techniques. This paper proposes a measurement-based dynamic equivalent in order to increase both model accuracy and simulation speed. The proposed method uses a set of measurements at the boundary nodes between the study area and external area for model parameter identification. Case studies demonstrate that the measurement-based technique can capture the main system behaviors accurately and improve computational efficiency.
Purpose: In dynamic contrast enhanced CT (DCE-CT) study, prolonged CT scanning with high temporal resolution is required to give accurate and precise estimates of kinetic parameters. However, such scanning protocol could lead to substantial radiation dose to the patient. A novel method is proposed to reduce radiation dose to patient, while maintaining high accuracy for kinetic parameter estimates in DCE-CT study. Methods: The method is based on a previous investigation that the arterial impulse response (AIR) in DCE-CT study can be predicted using a population-based scheme. In the proposed method, DCE-CT scanning is performed with relatively low temporal resolution, hence, giving rise to reduction in patient dose. A novel method is proposed to estimate the arterial input function (AIF) based on the coarsely sampled AIF. By using the estimated AIF in the tracer kinetic analysis of the coarsely sampled DCE-CT study, the calculated kinetic parameters are able to achieve a high degree of accuracy. The method was tested on a DCE-CT data set of 48 patients with cervical cancer scanned at high temporal resolution. A random cohort of 34 patients was chosen to construct the orthonormal bases of the AIRs via singular value decomposition method. The determined set of orthonormal bases was used to fit the AIFs in the second cohort (14 patients) at varying levels of down sampling. For each dataset in the second cohort, the estimated AIF was used for kinetic analyses of the modified Tofts and adiabatic tissue homogeneity models for each of the down-sampling schemes between intervals from 2 to 15 s. The results were compared with analyses done with the ''raw'' down-sampled AIF. Results: In the first group of 34 patients, there were 11 orthonormal bases identified to describe the AIRs. The AIFs in the second group were estimated in high accuracy based on the 11 orthonormal bases established in the first group along with down-sampled AIFs. Using the 11 orthonormal bases, the estimated AIFs for the second group were found to have an averaged maximal percentage error of 3.4%{+-} 7.5% in all sampling schemes up to 15 s. The results of kinetic analysis with the proposed method compared with down sampling alone showed that the proposed method is superior in maintaining the accuracy in volume transfer constant (K{sup trans} ) after 9 s down-sampling interval, blood volume (v{sub b} ) for almost all down-sampling intervals, and blood flow (F) after 11 s down-sampling interval. The preliminary results suggested that the proposed method is able to support scanning intervals of 10-15 s at a cost of 6.2%-10.0% loss in accuracy of K{sup trans} and 10.9%-19.4% in v{sub b}, and the scanning intervals of 12-15 s at a cost of 9.7%-14.6% for F in DEC-CT studies for patients with cervix cancer. Conclusions: The proposed method of AIF estimation allows low scanning frequency in DCE-CT study to reduce radiation dose to patient, while maintaining relatively high accuracy in the kinetic parameter estimates. The initial results suggested that the method is applicable for DCE-CT studies for patients with cervical cancer.
The Vlasov–Maxwell equations possess a Hamiltonian structure expressed in terms of a Hamiltonian functional and a functional bracket. In the present paper, the transformation (‘lift’) of the Vlasov–Maxwell bracket induced by the dynamical reduction of single-particle dynamics is investigated when the reduction is carried out by Lie-transform perturbation methods. The ultimate goal of this work is to provide an explicit pathway to the Hamiltonian formulations for the guiding-centre and gyrokinetic Vlasov–Maxwell equations, which have found important applications in our understanding of turbulent magnetized plasmas. Here, it is shown that the general form of the reduced Vlasov–Maxwell equations possesses a Hamiltonian structure defined in terms of a reduced Hamiltonian functional and a reduced bracket that automatically satisfies the standard bracket properties.
Introducing cross-links is a powerful approach to improve polymeric material performance relevant to controlling viscoelasticity, thermal and creep resistance, degradability, and efficient membrane separations. The chemically specific glass transition temperature T g is of fundamental importance in determining the time scales of key dynamical processes and physical state of the material in such applications. Here, we study experimentally how the introduction of relatively large cross-linking molecules in slowly exchanging dynamic bond-forming polymers (vitrimers) impacts vitrification for diverse polymer chemistries and a wide range of cross-link fractions. We find T g can increase, decrease, or even remain essentially unchanged, in qualitative contrast to the generic elevation of T g in traditional permanent polymer networks. We formulate an effective terpolymer network model to understand this rich behavior, which emerges as a consequence of a competition between pure cross-linking and generalized plasticization effects. The latter is associated with the tunable cross-linker size and intrinsic dynamic mobility that can offset slowing down due to traditional permanent cross-linking constraints. Here, a new strategy for functional polymer network design is suggested based on adjusting the relative importance of the two competing physical effects, which potentially can significantly enhance energy savings in applications while retaining other intrinsic properties germane to advanced materials performance.