Simulation of Morphology and Dynamics in Hydroxide-Conducting Polysulfones for Alkaline Batteries.
Abstract not provided.
Frischknecht, Amalie↗
SEARCH · Search NASA
Results for “Polysulfone”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Adsorptive behavior of poly (vinylidene fluoride) membranes for the recovery of lignin-derived hydrophobic deep eutectic solvents
Abstract Recently, membrane technology has gained significant traction as an energy-efficient alternative to traditional thermal processes for solvent recovery. Deep eutectic solvents (DESs) have emerged as sustainable alternatives to conventional organic solvents, yet a systematic methodology for selecting compatible membrane materials for their recovery remains underdeveloped. This study established a predictive framework for membrane material selection in hydrophobic DES applications using Hansen Solubility Parameters (HSP) with inverted criteria targeting materials with relative energy difference (RED) values greater than 1.0. Flat sheet membranes were fabricated via the non-solvent induced phase separation (NIPS) technique. Four NIPS fabricated polymer membranes were evaluated: polysulfone, cellulose acetate, polyvinylidene fluoride (PVDF) fabricated with polyethylene glycol (PEG) as a pore-forming agent, and polybenzimidazole (PBI). The HSP approach successfully predicted membrane-solvent compatibility, with polysulfone (RED = 0.6) and cellulose acetate (RED = 0.9) dissolving completely within 24 h, while PVDF (RED = 1.9) and PBI (RED = 1.1) maintained structural integrity throughout a 7-day exposure period. Furthermore, PVDF demonstrated superior performance with minimal weight gain (3.0%), hydrophobic surface characteristics (122° water contact angle), and enhanced mechanical properties following DES exposure. Comprehensive chemical and morphological characterization confirmed PVDF’s chemical stability and revealed a surface-selective interaction mechanism involving simultaneous PEG (pore-forming agent) extraction and DES component adsorption. Adsorption kinetics followed pseudo-first-order behavior with reversible characteristics, best described by the Temkin isotherm model (R² = 0.9987). PVDF membranes-maintained separation functionality with average lignin rejection (75.2 ± 7.69%) and demonstrated filtration permeability of 2.0 ± 0.34 LMH/bar. This methodology provides a rational approach for membrane selection in emerging solvent systems, contributing to the advancement of sustainable separation technologies for DES-based biomass processing applications.
Science & Technology - Other Topics↗
Resilient high-temperature reverse osmosis desalination membranes
Conventional thin-film composite (TFC) reverse osmosis (RO) membranes experience irreversible performance loss at high temperatures, restricting their use in industries with high-temperature streams, including oil and gas, pharmaceuticals, electronics, power generation, food production, and hybrid desalination plants. However, the mechanisms driving the performance decline of TFC membranes at high temperatures remain poorly understood. Herein, we combine controlled experiments, molecular dynamics simulations, and micromechanical modeling to elucidate TFC failure mechanisms and to evaluate thermally resilient thin-film cross-linked (TFX) composite membrane. Upon exposure to elevated temperatures (>60°C), salt rejection of TFC dropped from ~99 to <90%, with irreversible structural damage in the polysulfone layer, confirmed by scanning electron microscopy. In contrast, the TFX membrane maintained ~99% salt rejection and showed no signs of physical degradation up to 80°C. Our combined analyses revealed that TFC membrane failure arises from irreversible pore expansion in the thermoplastic polysulfone support, leading to polyamide film rupture and delamination. TFX membranes resist thermal deformation, enabling ultrahigh-temperature RO desalination and water reuse.
Wu, Jishan [Rice Univ., Houston, TX (United States↗
Imidazolium-Type Anion Exchange Membranes for Improved Organic Acid Transport and Permselectivity in Electrodialysis
Most commercial anion exchange membranes (AEMs) deploy quaternary ammonium moieties. Alternative cation moieties have been explored in AEMs for fuel cells, but there are no studies focused examining alternative tethered cations in AEMs for ionic separations—such as organic acid anion transport via electrodialysis. H-cell and conductivity experiments demonstrate that tethered benzyl 1-methyl imidazolium groups in polysulfone AEMs enhance lactate conductivity by 49% and improved lactate anion flux by 24x when compared to a quaternary benzyl ammonium polysulfone AEM. An electrodialysis demonstration with the imidazolium-type AEM showed a 2x improvement in lactate anion flux and 20% improvement in permselectivity when benchmarked against the quaternary ammonium AEM. Molecular dynamics and 2D NOESY NMR revealed closer binding of lactate anions to the imidazolium cations when compared to the quaternary ammonium cation. It is posited that this closer binding is responsible to greater flux values observed with imidazolium-type AEM.
36 MATERIALS SCIENCE↗
Project Final Report - Advanced Oxygen Separation from Air Using a Novel Mixed Matrix Membrane
This report describes a summary of the findings of the project. The technical work was divided into three activities: 1) technoeconomic analysis; 2) membrane component development (support layer, selective layer development, and gutter layer formulation); and 3) hollow fiber formation. The technoeconomic analysis includes operating, capital, and materials costs of an oxygen enrichment system with 1-3 stages. The analysis concluded that the desired gas quality (90-95% O2) cannot be reached with a single stage. The triple stage system yielded the best overall product quality at lower membrane performance levels but with the highest cost. For the membrane development activities, functionalized nanodiamonds have been shown to slightly improve membrane formation behaviors and gas permeability performance. For example, support layers based on polysulfone-nanodiamond composites have been formed that increase the material’s O2 permeability by over a factor of 150, however, at the cost of selectivity that suggests a change in transport mechanism. Furthermore, nanodiamonds have been found to improve membrane durability. Improvements in selective and gutter layers also have been accomplished. An additional accomplishment is the demonstration of phase inversion of polysulfone-nanodiamond composites that ensures that hollow fiber formation can be performed. Finally, the interfaces between support, gutter, and selective layers were briefly examined and the resulting membrane material consisting of all three layers gave good performance in an O2 separation from N2. The three-layer prototype membrane gave permeability of 29.2-32.2 Barrers, which equates to permeance of approximately 290-320 GPU, which is lower than the TEA informed goal of 500 GPU. O2/N2 selectivity ranged from 5.2-6.2, which is consistent with the less costly two-stage implementation of the technology. In summary, new materials have been developed for O2 concentration from air and are well-suited to a hollow fiber format.
20 FOSSIL-FUELED POWER PLANTS↗
Preparation of defect-free asymmetric gas separation membranes with dihydrolevoglucosenone (Cyrene TM ) as a greener polar aprotic solvent
Nonsolvent-induced phase separation (NIPS) is widely used to prepare asymmetric gas separation membranes. Most industrial NIPS casting solution formulations are limited to a small group of glassy polymers and, importantly, require toxic polar aprotic solvents such as N,N-dimethylacetamide (DMAc), N,N-dimethylformamide (DMF), or N-methyl-2-pyrrolidone (NMP). Growing restrictions on the use of such solvents are spurring the search for more benign casting solution formulations that do not compromise membrane performance. Herein this study reports high-flux, defect-free asymmetric polysulfone (PSf) gas separation membranes prepared using dihydrolevoglucosenone (Cyrene TM ), a polar aprotic solvent that is believed to be safer than DMAc, DMF, and NMP, as the majority casting solution component. Optimized formulations and casting conditions produce membranes with hydrogen permeances exceeding 100 gas permeance units (GPU) and selectivities at or above those of dense PSf films. Dry/wet NIPS membrane performance improved with shorter dry step times and increased Cyrene TM loadings relative to the volatile solvent, tetrahydrofuran (THF), in the casting solution. The high water-Cyrene TM Flory-Huggins interaction parameter, $\mathcal{X}12$ , and high casting solution viscosities help suppress the formation of skin layer defects and sublayer macrovoids. In some cases, membrane selectivities were influenced by substructure resistance, providing insight into the relationship between sublayer morphology and membrane performance.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Quaternary Ammonium-Functionalized Poly(Arylene Ether Sulfone) Random Copolymers for Direct Air Capture
Direct air capture (DAC) is a promising tool for reducing CO 2 concentrations in the atmosphere and fighting climate change. We synthesized a series of quaternary ammonium (QA) functionalized poly(arylene ether sulfone) copolymers with varying mole fractions of charge content and demonstrated their potential as sorbents for DAC. Molecular weight analysis determined high monomer conversion was achieved in <6 h and relatively high molecular weights for all copolymer compositions. Thermal analysis revealed all polymers had degradation temperatures >240 °C and a single glass transition temperature (T g ); the T g decreased with an increase in ion exchange capacity (IEC). Fractional free volume and water uptake percentage increased and water contact angle decreased with the number of QA sites when compared to a neutral, commercially available polysulfone (Udel® P-1700 PSU). Next, the novel series of ammonium-functionalized copolymers exhibited a moisture-mediated capture and release of atmospheric CO 2 . When exposed to air containing 30% relative humidity the polymers captured CO 2 and the capacity increased with the IEC. When the relative humidity was increased to 95% the samples released the CO 2 . This study demonstrates a promising CO 2 DAC sorbent and highlights the possibility for continuous DAC with purpose-built free-standing membranes.
42 ENGINEERING↗
Printed graphene oxide-based membranes for gas separation and carbon capture
Graphene oxide (GO)-based separation membranes have demonstrated the great potential to separate molecules and ions by the interlayer spacing with tunable nano-sized channels. The scalable fabrication of GO-based gas separation membranes, however, remains challenging, although a few preparation approaches have been reported. Here in this work, we present for the first time that the co-solvent ink-jet printing, as a fast and scalable method, can be utilized for scalable GO-based gas separation membrane preparation. Large-area (>100 cm 2 ), ultrathin, and high-quality GO membrane was successfully deposited on commercial polysulfone (PS) support, and characterized by scanning electron microscopy, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, and X-ray diffraction, et al., Selective hydrogen (H 2 ) and helium (He) transport over carbon dioxide (CO 2 ) and nitrogen (N 2 ) was demonstrated for the printed GO membrane. To further explore the separation potential of the printed GO-based gas membrane, additives for facilitated molecular transport were incorporated during the membrane printing process. By inserting CO 2 -philic agents into the printed GO membrane, highly efficient separation of CO 2 from N 2 was achieved with CO 2 /N 2 selectivity of 70 and CO 2 permeance as high as 2,500 GPU. The strategy proposed here may provide guidance for large-scale GO-based gas separation membrane production and a versatile approach for applying other functional 2-dimensional materials towards the membrane separation application.
42 ENGINEERING↗
Orientation matters: Measuring the correct surface of polyamide membranes with quartz crystal microbalance
The surface of polyamide reverse osmosis (RO) membranes which regulates interface-dominated phenomena, such as partitioning and fouling, is the one facing the feed during operation. However, the opposite surface of the polyamide selective layer, the one facing the permeate and in contact with the polysulfone porous support, is commonly analyzed in quartz crystal microbalance (QCM) measurements due to limitations of state-of-the-art transfer methodologies. Such measurements on the back surface cannot be generalized because the polyamide layer is chemically and morphologically asymmetric. Herein, we introduce a simple method to coat QCM sensors with polyamide active layers in the correct orientation (i.e., exposing their front surface) and show that interface-dominated phenomena differ significantly between orientations. We start by describing a transfer protocol to coat any surface with a polyamide layer on its front surface orientation. We then systematically analyze the chemical and morphological differences between the two surfaces of the polyamide layer of a commercial RO membrane. Finally, we demonstrate that interface-dominated phenomena depend on the orientation by showing that NaCl partitioning at pH 6 was 1.3 to 2.3-fold higher on the front surface and that organic fouling with humic acid occurred at a lower rate on this surface. The new method presented herein enables measurements on the front surface of polyamide RO membranes, which should be the standard in any future QCM studies.
Fouling behavior↗
Tin asymmetric membranes for high capacity sodium ion battery anodes
Sodium-ion batteries have attracted tremendous research attention as promising candidates for next generation energy storage systems due to low-cost and high abundancy. Furthermore, comparing to current Li-ion battery technology, limitations on the anode side seriously hinder the cell performance since sodium does not easily intercalate into graphite materials. Here, tin nanoparticles embedded in various asymmetric membrane structures were developed to leverage the high capacity of tin (847 mA h g -1 based on Na 15 Sn 4 ) and accommodate the significant volume expansion for long cycle life. It was demonstrated 762 mA h g -1 reversible capacity at 50 mA g -1 and stable cycling performance over 100 cycles with 92.1% capacity retention at 100 mA g -1 can be achieved for the tin asymmetric membrane electrode synthesized using polysulfone and tin tert-butoxide precursor.
25 ENERGY STORAGE↗
High performance polymers for oil and gas applications
Proper material selection has been one of the most important aspects in the design of chemical process equipment. In particular, the oil and gas industry has transitioned from using metals to non-metals (e.g. advanced and high performance polymeric materials) in most of their structural components, coatings, equipment parts, and the like. It is therefore imperative to understand the advantages and limitations of these polymer materials before they can be effectively used for a specific application. This review article aims to provide an overview of the properties, applications, and durability against reactivity and degradation of high performance polymers commonly used in the oil and gas industry. These include polysulfone, polyetherimide, polyphenylene sulfide, polyetheretherketone, fluoropolymers, and other high performance thermosets, elastomers, and polymer nanocomposites. Further, this article covers the current research efforts in improving the properties of high performance polymers and expanding their applications (including 3D printing or additive manufacturing) in the oil and gas industry.
36 MATERIALS SCIENCE↗
Nondestructive In Operando Imaging of Thin Film Composite Membrane Compaction Enhanced by AI-Based Segmentation
Reverse osmosis (RO) membranes are essential for desalination and water reuse, yet their permeability declines in high-pressure applications due to membrane compaction. This study investigates the structural and functional responses of commercial brackish, seawater, and high-pressure RO membranes at applied pressures up to 120 bar using a multiscale, nondestructive in operando scanning electron microscopy (iSEM) imaging platform. The iSEM technique reveals progressive densification across the composite membrane structure, which correlates with observed declines in water and solute permeance. To quantify these structural changes with greater fidelity, we combined X-ray computed tomography with AI-based segmentation enabling precise analysis of pore size distribution and thickness of the polysulfone support layer. Compared to traditional thresholding, AI segmentation accurately delineates material phases and void spaces, enhancing the reproducibility and resolution of morphological assessments. The results demonstrate that compaction-induced reductions in porosity and thickness strongly impact membrane transport properties. These findings provide mechanistic insights into the compaction behavior of RO membranes and underscore the potential for advanced imaging and AI-driven data analysis to guide the design of next-generation membranes with improved mechanical resilience and operational longevity.
13 HYDRO ENERGY↗
Chemical Recycling of Polybutadiene Rubber with Tailored Depolymerization Enabled by Microencapsulated Metathesis Catalysts
The effective management of plastic waste streams to prevent plastic land and water pollution is a growing problem that is also one of the most important challenges in polymer science today. Polymer materials that are stable over their lifetime and can also be cheaply recycled or repurposed as desired could more easily be diverted from waste streams. However, this is difficult for most commodity plastics. It is especially difficult to conceive this with intractable, cross-linked polymers such as rubbers. In this work, we explore the utility of microencapsulated Grubbs’ catalysts for the in-situ depolymerization and reprocessing of polybutadiene (PB) rubber. Second-generation Hoveyda-Grubbs catalyst (HG2) contained within glassy thermoplastic microspheres can be dispersed in PB rubber below the microsphere’s glass transition temperature (T g ) without adverse depolymerization, evidenced by rubber with and without these microspheres obtaining similar shear storage moduli of ≈16 and ≈28 kPa, respectively. The thermoplastic’s T g can be used to tune the depolymerization temperature, via release of HG2 into the rubber matrix. For example, using poly(lactic acid) (PLA) vs polysulfone results in an 85 and 162 °C depolymerization temperature, respectively. Liquefaction of rubber to a mixture of small molecules and oligomers is demonstrated using a 0.01 mol % catalyst loading using PLA as the encapsulant. Furthermore, at that same catalyst loading, depolymerization occurs to a greater extent in comparison to two ex-situ approaches, including a conventional solvent-assisted method, where it occurs at roughly twice the extent at each given catalyst loading. In addition, depolymerization of the microsphere-loaded rubbers was demonstrated for samples stored under nitrogen for 23 days. Lastly, we show that the depolymerized products can be reprocessed back into solid rubber with a shear storage modulus of ≈32 kPa. Thus, we envision that this approach could be used to recycle and reuse cross-linked rubbers at the end of their product lifetime.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
High flux novel polymeric membrane for renal applications
Biocompatibility and the ability to mediate the appropriate flux of ions, urea, and uremic toxins between blood and dialysate components are key parameters for membranes used in dialysis. Oxone-mediated TEMPO-oxidized cellulose nanomaterials have been demonstrated to be excellent additives in the production and tunability of ultrafiltration and dialysis membranes. In the present study, nanocellulose ionic liquid membranes (NC-ILMs) were tested in vitro and ex vivo. An increase in flux of up to two orders of magnitude was observed with increased rejection (about 99.6%) of key proteins compared to that of polysulfone (PSf) and other commercial membranes. NC-ILMs have a sharper molecular weight cut-off than other phase inversion polymeric membranes, allowing for high throughput of urea and a uremic toxin surrogate and limited passage of proteins in dialysis applications. Superior anti-fouling properties were also observed for the NC-ILMs, including a > 5-h operation time with no systemic anticoagulation in blood samples. Finally, NC-ILMs were found to be biocompatible in rat ultrafiltration and dialysis experiments, indicating their potential clinical utility in dialysis and other blood filtration applications. These superior properties may allow for a new class of membranes for use in a wide variety of industrial applications, including the treatment of patients suffering from renal disease.
60 APPLIED LIFE SCIENCES↗
Atomic layer deposition of nanofilms on porous polymer substrates: Strategies for success
Atomic layer deposition (ALD) is a versatile technique for engineering the surfaces of porous polymers, imbuing the flexible, high-surface-area substrates with inorganic and hybrid material properties. Previously reported enhancements include fouling resistance, electrical conductance, thermal stability, photocatalytic activity, hydrophilicity, and oleophilicity. However, there are many poorly understood phenomena that introduce challenges in applying ALD to porous polymers. In this paper, we address five common challenges and ways to overcome them: (1) entrapped precursor, (2) embrittlement, (3) film fracture, (4) deformation, and (5) pore collapse. These challenges are often interrelated and can exacerbate one another. To investigate these phenomena, we applied various ALD chemistries to porous polymers including polyethersulfone, polysulfone, polyvinylidene fluoride, and polycarbonate track-etched membranes. Reaction-diffusion modeling revealed why certain precursors and processing conditions result in embrittling subsurface material growth, entrapment of unreacted precursors, and nongrowth. We quantify the limits of ALD processing temperatures that are dictated by thermal expansion mismatch and can lead to fractured ALD films. The results herein allow us to make recommendations to avoid, mitigate, or overcome the difficulties encountered when performing ALD and plasma-enhanced ALD on porous polymers. We intend this article to serve as a “lessons learned” guide informed by previous experience to provide a better understanding of the difficulties and limitations of ALD on porous polymers and knowledge-based guidelines for successful depositions. This knowledge can accelerate future research and help experimentalists navigate and troubleshoot as they expose porous polymers to reactive precursor vapors.
36 MATERIALS SCIENCE↗
Material Characterization for Large Scale Additive Manufacturing (AM)
The objective of this project was to enable prediction of residual stresses and warpage for extrusion deposition additive manufacturing (EDAM) fabricated carbon fiber thermoplastic matrix parts with three different materials systems produced by Techmer. The materials selected include Polyphenylene sulfide reinforced with 50% by weight of carbon fiber (CF-PPS), Polyethersulfone reinforced with 25% by weight of carbon fiber (CF-PESU), Polysulfone reinforced with 25% by weight of carbon fiber (CF-PSU). ADDITIVE3D © , a physics-based simulation workflow for EDAM, provided the simulation capabilities required for this project. Simulation predictions were validated against measurements carried out during and after the printing process carried out in the CAMRI and LSAM systems . Predictions for temperature, degree of crystallinity and deformation were carried out for the three material systems and two different geometries. Predictions for temperature were correlated very well with the experimental measurements for the two geometries printed using the three-material systems. The crystallinity level was verified for CF-PPS. The predictions for part deformation were in good agreement with the experimental measurements. In the best-case, predictions were within 8% of the maximum displacement observed in the 3-direction whereas predictions were within 14% for the worst-case. The adoption of this technology in commercial large-scale EDAM production processes would dramatically reduce the costs associated with producing articles by that process. Many thousands of dollars in materials, energy, and machine time could be saved by utilizing this simulation technology to develop articles rather than iterative printings to arrive at the optimal or correct design. The avoidance of a single failed print has the possibility of saving tens of thousands of dollars involved in the cost of material, machine and operators’ time.
36 MATERIALS SCIENCE↗
Self-assembly of co-continuous nanostructured copolymer templates with compositional and architectural dispersity
In our previous DOE-supported project (DE-SC0016208), we demonstrated that a particular architecture dubbed ‘randomly end-linked copolymer networks’ (RECNs) led to especially robust self-assembly of disordered cocontinuous nanostructures. Such structures, wherein both microphases are fully percolating in three dimensions, are attractive for a wide-variety of energy-relevant applications including purification membranes, separators in batteries and fuel cells, catalyst supports, and high surface area electrodes. In the current project we sought to substantially extend our fundamental understanding of how different types of randomness in blocky copolymer architecture contribute to the robust formation of disordered cocontinuous nanostructures. To do so, we filled in the sizable gap between the previously studied cases of randomly linked linear multiblock copolymers and RECNs by studying two intermediate cases: (i) random miktoarm star polymers, which contain dispersity in the number of the two chemically-incompatible strands located at each junction and therefore the preferred interfacial curvature of each polymer, and (ii) randomly branched copolymers, which also possess bridging strands that stretch across domains and apply local ‘elastic’ forces to the interfaces. In addition, we studied a different network architecture, statistically crosslinked copolymer networks, that is more straightforward to prepare using chain growth polymerization methods, enabling more facile formation of cocontinuous nanostructures. Finally, we extended our approaches from model systems based on polystyrene and poly(lactic acid) to copolymer architectures containing either (i) polysulfone, an engineering polymer that provides excellent mechanical properties for membrane applications, or (ii) polyacrylonitrile, providing a convenient route to nanoporous carbon materials.
36 MATERIALS SCIENCE↗
Proton exchange membrane fuel cells
Disclosed embodiments concern a membrane electrode assembly or a proton exchange membrane fuel cell comprising a phosphoric acid-doped polymeric membrane comprising a cationic functional group, such as an assembly or fuel cell having an ion exchange capacity of 0.8 to 3 mmol/gram and an operating temperature range of from 80° C. to 220° C. The cationic functional group can be any suitable functional group, such as ammonium, imidazolium, guanidinium, phosphazenium, sulfonium, oxonium, and phosphonium, with working embodiments typically using quaternary ammonium cationic functional groups tethered to the polymeric core. The polymeric material may be any suitable polymeric material, such as a material selected from polyaryl polymers, polyarylamides, polyimides, polystyrenes, polysulfones, polyethers, polyether sulfones, polyketones, polyetherketones, polyarylethers, polyolefins, and polynitriles. The membrane electrode assembly or a proton exchange membrane fuel cell can be used in any application now known or hereafter developed, such as a vehicle or a stationary power device.
30 DIRECT ENERGY CONVERSION↗