Search NASA⌕ Search

SEARCH · Search NASA

Results for “scattering lengths”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Using Simulation to Interpret LArS's Results

Scintillation light analysis in liquid argon based neutrino detectors is restrained in capability due to uncertainty in fundamental constants critical to the analysis process. One such property is the Rayleigh scattering length of liquid argon. In the fall of 2023, the TallBo cryostat, located in the Noble Liquid Testing Facility (NLTF) at Fermilab, was used to study the scattering length of liquid argon in the Liquid Argon Scattering (LArS) experiment. Due to systematic errors unknown during measurement analysis, LArS s measurements were quite uncertain. By simulating the LArS experiment, we found that the downturn in detector count rate as a function of liquid argon height at low heights was caused by a misplaced silicon photo multiplier (SiPM). With concentrated effort, we may be able to successfully correct this effect by understanding the relationship between the specified Rayleigh scattering length and the measured attenuation length. With this information and further progression in analysis, we may be able to extract corrected measurements from the LArS data and attain a tangible experimental measurement of the scattering length of liquid argon.

Breaux, Auto D. [Tulane U.]↗
DOE OSTI2021

Precision measurement of electron-electron scattering in GaAs/AlGaAs using transverse magnetic focusing

Electron-electron (e-e) interactions assume a cardinal role in solid-state physics. Quantifying the e-e scattering length is hence critical. In this paper we show that the mesoscopic phenomenon of transverse magnetic focusing (TMF) in two-dimensional electron systems forms a precise and sensitive technique to measure this length scale. Conversely we quantitatively demonstrate that e-e scattering is the predominant effect limiting TMF amplitudes in high-mobility materials. Using high-resolution kinetic simulations, we show that the TMF amplitude at a maximum decays exponentially as a function of the e-e scattering length, which leads to a ready approach to extract this length from the measured TMF amplitudes. The approach is applied to measure the temperature-dependent e-e scattering length in high-mobility GaAs/AlGaAs heterostructures. The simulations further reveal current vortices that accompany the cyclotron orbits - a collective phenomenon counterintuitive to the ballistic transport underlying a TMF setting.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Measurement of Rayleigh Scattering in Liquid Argon at Vacuum Ultraviolet Wavelengths

Liquid argon based detectors are limited in scintillation light analysis capabilities due to inconsistent measurements of fundamental constants essential for the reconstruction of scintillation events. This experiment measures the Rayleigh scattering length of vacuum ultraviolet light propagating in liquid argon in support of liquid argon experiments. Preliminary results are presented for the Rayleigh scattering length in a range of vacuum ultraviolet wavelengths. Current data collection and analysis methods in this measurement require further advancements to understand and eliminate anomalous phenomena in the data. Future measurements in this experiment aim to precisely measure the liquid argon ultraviolet light scattering length. Results will contribute to the development of new photon system analysis methods for liquid argon experiments.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Elastic nucleon-pion scattering at m π = 200 MeV from lattice QCD

Elastic nucleon-pion scattering amplitudes are computed using lattice QCD on a single ensemble of gauge field configurations with N f = 2 + 1 dynamical quark flavors and m π = 200 MeV. The s-wave scattering lengths with both total isospins I = 1/2 and I = 3/2 are inferred from the finite-volume spectrum below the inelastic threshold together with the I = 3/2 p-wave containing the Δ(1232) resonance. The amplitudes are well-described by the effective range expansion with parameters constrained by fits to the finite-volume energy levels, enabling a determination of the I = 3/2 scattering length with statistical errors below 5%, while the I = 1/2 scattering length is somewhat less precisely evaluated. Systematic errors due to excited states and the influence of higher partial waves are controlled, providing a step toward future computations down to physical light quark masses with multiple lattice spacings and volumes.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2026

J/ψ photoproduction at the threshold with GlueX

High-statistics total cross sections for the vector meson photoproduction at the threshold: γp → ωp (from A2 at MAMI, ELPH, and CBELSA), γp → ϕp (from CLAS6 at JLab and LEPS at SPring-8), and γp → J/ψp (from GlueX at JLab) allow one to extract the absolute value of vector meson nucleon scattering length using Vector Meson Dominance (VMD) model. The “young” vector meson hypothesis may explain the fact that the obtained scattering length values for the nucleon. ϕ-meson compared to the typical hadron size of approximately ∼ 1 fm indicates that the proton is more transparent for the ϕ-meson compared to the ω-meson and is much less transparent than the J/ψ-meson. The extended analysis of Υ-meson photoproduction using quasi-data from the QCD approach is in perfect agreement with the light-meson findings using experimental data. Finally, the ability of J-PARC to measure $π^{–}p → ϕn$ and $π^{–}p → J/ψn$ at the threshold, which are free from the VMD model, is presented. It enables one to understand the dynamics of $s\bar{s}$ and $c\bar{c}$ production at threshold and to search for the effects of LHCb’s heavy quark exotic states.

Vector meson nucleon scattering length↗
DOE OSTI2026

Weak localization and universal conductance fluctuations in large-area twisted bilayer graphene

We study diffusive magnetotransport in highly 𝑝-doped large-area twisted bilayer graphene in 1∘, 7∘, 9∘, and 20∘ samples. All samples exhibit weak localization, from which we extract the phase coherence length and intervalley scattering lengths, and from that determine that dephasing is caused by electron-electron scattering and intervalley scattering is caused by point defects. We observe signatures of universal conductance fluctuations in the 9∘ sample, which has high mobility and is near the van Hove singularity. Further improvements in sample quality and applications to large-area moiré materials will open new avenues to observe quantum interference effects.

Talkington, Spenser [University of Pennsylvania]↗
DOE OSTI2021

Deuteration and Polymers: Rich History with Great Potential

Deuterium, a stable hydrogen isotope, has been playing important roles in many scientific areas, including polymer science. The developments of deuteration science and polymer science have been interwoven for the past 60 years. The unique characteristics of the scattering lengths for hydrogen isotopes (protium and deuterium) result in the dramatic differences of scattering length densities for protiated and deuterated compounds omnipresent in polymers, rendering neutron scattering a powerful tool for the investigation of polymeric structures and dynamics that are inaccessible to other tools. While the role of deuteration in neutron scattering of polymeric materials can hardly be overstated, it has also enabled the addressing of many questions using other approaches, such as NMR and vibrational spectra. In this Perspective, we provide a brief account of deuterium in the synthesis, properties, and application of various polymers. We also offer an outlook of the potentials in this ever-evolving and exciting area.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Probing Diffuse Polymer Brush Interfaces Using Resonant Soft X-ray Scattering

The success of a neutron or x-ray scattering experiment relies on sufficient signal from the system being studied. The intensity of scattered radiation depends on instrument resolution, the structure of the scattering elements, and the interaction between the incident radiation and the sample—so-called ‘scattering contrast’. The contrast depends on the square of the difference in the scattering length densities (SLDs) for each component, and each SLD depends on the atoms and radiation involved (eq. 1). For neutrons, the scattering lengths bi are specific to the type of nuclei involved. For conventional x-ray scattering, b i depends on the electron density and thus the atomic number Z.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Implementation of a self-consistent slab model of bilayer structure in the SasView suite

Slab models are simple and useful structural descriptions which have long been used to describe lyotropic lamellar phases, such as lipid bilayers. Typically, slab models assume a midline symmetry and break a bilayer structure into three pieces, a central solvent-free core and two symmetric outer layers composed of the soluble portion of the amphiphile and associated solvent. This breakdown matches reasonably well to the distribution of neutron scattering length density and therefore is a convenient and common approach for the treatment of small-angle scattering data. Here, an implementation of this model within the SasView software suite is reported. The implementation is intended to provide physical consistency through the area per amphiphile molecule and number of solvent molecules included within the solvent-exposed outer layer. The proper use of this model requires knowledge of (or good estimates for) the amphiphile and solvent molecule volume and atomic composition, ultimately providing a self-consistent data treatment with only two free parameters: the lateral area per amphiphile molecule and the number of solvent molecules included in the outer region per amphiphile molecule. Here, the use of this code is demonstrated in the fitting of standard lipid bilayer data sets, obtaining structural parameters consistent with prior literature and illustrating the typical and ideal cases of fitting for neutron scattering data obtained using single or multiple contrast conditions. While demonstrated here for lipid bilayers, this model is intended for general application to block copolymers, surfactants, and other lyotropic lamellar phase structures for which a slab model is able to reasonably estimate the neutron scattering length density/electron-density profile of inner and outer layers of the lamellae.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Measurement of Rayleigh Scattering in Liquid Argon at Vacuum Ultraviolet Wavelengths

Liquid argon based experiments are limited in scintillation light analysis capabilities due to inconsistent measured values of fundamental constants essential for reconstructing scintillation events. This experiment measures the Rayleigh scattering length of vacuum ultraviolet light propagating in liquid argon to support liquid argon experiments by expanding the scope of scintillation signal analysis. Preliminary results are presented for the Rayleigh scattering length in arange of vacuum ultraviolet wavelengths, including the liquid argon scintillation peak wavelength. Currently, further data collection and analysis is required to reduce measurement uncertainty as well as quantify and correct for other effects such as the photon detector temperature dependence. Results will contribute to the development of new photon detector system analysis methods for liquid argon experiments.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Quantum Monte Carlo studies of a trimer scaling function with microscopic two- and three-body interactions

Here, we present an energy scaling function to predict, in a specific range, the energy of bosonic trimers with large scattering lengths and finite range interactions, which is validated by quantum Monte Carlo calculations using microscopic Hamiltonians with two- and three-body potentials. The proposed scaling function depends on the scattering length, effective range, and a reference energy, which we chose as the trimer energy at unitarity. We obtained the scaling function as a limit cycle from the solution of the renormalized zero-range model with effective range corrections. We proposed a simple parametrization of the energy scaling function. Besides the intrinsic interest in theoretical and experimental investigations, this scaling function allows one to probe Efimov physics with only the trimer ground states, which may open opportunities to identify Efimov trimers whenever access to excited states is limited.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
NASA NTRS1994

Evaluation of very long baseline interferometry atmospheric modeling improvements

We determine the improvement in baseline length precision and accuracy using new atmospheric delay mapping functions and MTT by analyzing the NASA Crustal Dynamics Project research and development (R&D) experiments and the International Radio Interferometric Surveying (IRIS) A experiments. These mapping functions reduce baseline length scatter by about 20% below that using the CfA2.2 dry and Chao wet mapping functions. With the newer mapping functions, average station vertical scatter inferred from observed length precision (given by length repeatabilites) is 11.4 mm for the 1987-1990 monthly R&D series of experiments and 5.6 mm for the 3-week-long extended research and development experiment (ERDE) series. The inferred monthly R&D station vertical scatter is reduced by 2 mm or by 7 mm is a root-sum-square (rss) sense. Length repeatabilities are optimum when observations below a 7-8 deg elevation cutoff are removed from the geodetic solution. Analyses of IRIS-A data from 1984 through 1991 and the monthly R&D experiments both yielded a nonatmospheric unmodeled station vertical error or about 8 mm. In addition, analysis of the IRIS-A exeriments revealed systematic effects in the evolution of some baseline length measurements. The length rate of change has an apparent acceleration, and the length evolution has a quasi-annual signature. We show that the origin of these effects is unlikely to be related to atmospheric modeling errors. Rates of change of the transatlantic Westford-Wettzell and Richmond-Wettzell baseline lengths calculated from 1988 through 1991 agree with the NUVEL-1 plate motion model (Argus and Gordon, 1991) to within 1 mm/yr. Short-term (less than 90 days) variations of IRIS-A baseline length measurements contribute more than 90% of the observed scatter about a best fit line, and this short-term scatter has large variations on an annual time scale.

Macmillan, D. S.↗
DOE OSTI2023

Deconvoluting Structures of Component Plant Biopolymers Using Deuterium Labeled Brassica oleracea Stems

Several Brassica species are cultivated globally for the production of seed oils as food, lubricants, and increasingly biofuels. The stem and leaf residues of these herbaceous dicotyledonous crops constitute another feedstock for biofuels and other products. Plant cell walls are complex, multipolymeric structures that consist primarily of polysaccharides and lignin. Cellulose chains coalesce to form crystalline microfibrils while the amorphous biopolymers, hemicellulose, and lignin form a network structure and fill the interstitial space. Neutron scattering has been used for the structural study of the assembly and deconstruction of the plant cell walls. However, similar neutron sensitivity of the different amorphous biopolymers has made structural association to individual component biopolymers nontrivial and ambiguous. To improve the association of structural features to specific biopolymer components, partial deuteration of the plant cell wall can be employed to increase the difference in the neutron scattering length density between amorphous carbohydrate and lignin plant polymers. Vegetative stems from partially deuterated Brassica oleracea acephala (kale) plants were obtained commercially, and the plant cell wall structures were studied by contrast-variation small-angle neutron scattering (CV-SANS) and Fourier-transform infrared spectroscopy (FTIR). FTIR results indicated that deuterium substitution for hydrogen in the carbohydrates was higher than that in lignin. By combining CV-SANS and FTIR results, the neutron scattering length density (nSLD) of the polysaccharides and lignin was determined to match nSLD of 65%:35% and 48%:52% D 2 O/H 2 O solvent mixtures, respectively. These nSLD values were higher than the nSLD values of polysaccharides and lignin for H 2 O grown biopolymers. The nSLD increase correlates to replacing about 42.5% of hydrogens present as both C–H and O–H groups in cellulose with deuterium atoms, while only 21% for lignin. In conclusion, this study lays the foundation to use partially deuterated plants to deconvolute structural features of the different component biopolymers, especially cellulose, hemicellulose, and lignin, of the plant cell wall without introducing unintended structural modifications due to the pretreatment extraction processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Droplets of bosons at a narrow resonance

We consider bosons interacting through a narrow s-wave resonance. Such a resonance is characterized by an infinite scattering length and a large and negative effective range r 0 . We argue that any number N≥3 of bosons can form a self-bound cluster with the binding energy per particle increasing as N 2 for 1≪N≪(−r 0 /a) 1/2 , where abg is the background scattering length (between atoms and molecules). In the opposite limit N≫(−r 0 /a) 1/2 , bosons form droplets with binding energy per particle saturating to a constant value independent of the particle number. Here, the stability of clusters and droplets when the interaction is detuned from the resonance is also studied.

Wang, Ke [University of Chicago, IL (United States↗
DOE OSTI2022

First-principles prediction of the Landau parameter for Fermi liquids near the unitarity limit

This paper explores the behavior of systems of cold fermions as they approach unitary above the critical temperature. Symmetry arguments indicate that at unitarity the Fermi-liquid picture breaks down. As we move away from unitarity, by decreasing the scattering length, the dilaton, the Goldstone boson resulting from the spontaneous breaking of Schrodinger symmetry by the Fermi sea, becomes gapped. At energies below this gap, the interaction between quasiparticles will be dominated by dilaton exchange. Here, the dilaton mass can, in turn, be related via anomaly matching to the scattering length and contact parameter within the confines of a systematic expansion.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

The Unitarity-Limit Expansion for Two Nucleons with Perturbative Pions: Digest and Ideas

Theorists love nontrivial fixed points. In the Unitarity Limit, the NN 𝑆-wave binding energies are zero, the scattering lengths infinite, Physics is universal, i.e. insensitive to details of the interactions, and observables display richer symmetries, namely invariance under both scaling and Wigner’s combined SU(4) transformation of spin and isospin. In “Pionless” EFT, both are explicitly but weakly broken and hence perturbative in the Unitarity Window (phase shifts 45° ≲ δ(k) ≲ 135°, i.e. momenta k≈mπ). This Unitarity Expansion provides strong hints that Nuclear Physics resides indeed in a sweet spot: bound weakly enough to be insensitive to the details of the nuclear interaction; and therefore interacting strongly enough that the NN scattering lengths are perturbatively close to the Unitarity Limit. In this paradigm change, NN details are less important than NNN interactions to explain the complexity and patterns of the nuclear chart. This presentation is a digest of the first quantitative exploration of corrections to this picture when pions are included [1] (see there for a more comprehensive list of references). Since the pion mass and decay constant introduce dimensionful scales in the NN system, they explicitly break the symmetries of the Unitarity fixed point. In χEFT, these symmetries must therefore be hidden and instead be classified as emergent.

Griesshammer, Harald W. [The George Washington Uni↗
DOE OSTI2023

Parameterization of Direct and Doorway Processes in R-Matrix Formalism

R-matrix formalism is extended beyond compound nuclear (CN) resonant reactions to include parameterization of direct as well as doorway processes. Direct processes in the R-matrix exterior are parameterized by a unitary matrix that introduces mixing among wave function coefficients of the incoming and outgoing wave function components at the R-matrix channel surface. Doorway processes are parameterized by separating the Hilbert space of the interior R-matrix region into its doorway and CN subspaces, from which doorway state eigenenergies, reduced width amplitudes, and the strengths of their coupling to CN levels appear as new R-matrix parameters. Parameterization of generalized as well as the conventional Reich–Moore approximation for eliminated capture channels in the presence of direct, doorway, and CN processes is presented along with a complex-valued scattering length with contributions from direct, doorway, and CN capture processes. Derivation of Brune’s alternative R-matrix parameters is extended to include doorway states. This work suggests how R-matrix formalism could be extended further by adopting the concepts from related reaction formalisms.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Evaluated Nuclear Data Requirements in Support of Fission and Fusion Applications [Slides]

This presentation touches on thermal scattering cross section and scattering lengths including criticality benchmarks (fission). Secondly, development and completeness of charged ­particle libraries: criticality benchmarks (fission), neutron source (fission/fusion), simulation benchmarks and light elements generation (fusion). Additionally, this presentation details on the covariances (methodology and completeness) with adjustment and optimization of nuclear data libraries (fission/fusion). Finally nuclear data reproducibility and conclusions are discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗