Search NASA⌕ Search

SEARCH · Search NASA

Results for “spinels”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Development of CuFeMnAlO 4+δ oxygen carrier with high attrition resistance and 50-kWth methane/air chemical looping combustion tests

A Copper-Ferri-Manganese-Aluminate spinel (CuFeMnAlO 4+δ ) oxygen carrier, developed at the US Department of Energy’s (DOE) National Energy Technology Laboratory (NETL), shows promising results for chemical looping combustion with methane. Attrition resistance of the spinel oxygen carrier (160–600 µm) produced by a wet agglomeration method was significantly higher than that observed previously with a Copper-Ferri-Aluminate (CuFeAlO 4 ) oxygen carrier. Improved attrition resistance of the novel carrier can be attributed to minimal alumina phase segregation and minimal carbon formation. Heats of reaction measured by differential scanning calorimetry indicated exothermicity during reduction with methane. The total oxygen transfer capacity of the material was about 10.5 wt% at 850 °C. The attrition resistance and the oxygen transfer capacity of the carrier prepared at a commercial manufacturing facility (180 kg) were very similar to observed values during the development phase with the lab scale preparations. The material displays satisfactory methane conversion and significantly high particle durability during a 54 h test campaign conducted in NETL’s 50-kWth chemical looping dual fluid bed reactor unit at temperatures ranging from 700 to 900 °C. Low oxygen carrier make-up cost, due to the use of natural ore and pigment grade raw materials during synthesis and very low attrition rates, exceeded the performance goals determined by systems studies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Investigations on the electronic properties and effect of chitosan capping on the structural and optical properties of zinc aluminate quantum dots

Quantum confined uncapped and chitosan capped nanoparticles of ZnAl 2 O 4 synthesized by microwave-assisted sol–gel method were investigated by structural analysis and optical techniques. X-ray diffraction studies confirmed the formation of cubic spinels with crystallite size 4.5 nm and 3.4 nm, respectively for uncapped and chitosan capped ZnAl 2 O 4 nanoparticles. Chitosan capping produced a blue shift in bandgap energy (3.84 to 3.94 eV) agreeing with size effects according to the Brus equation. A blue shift in emission peak and enhancement in photoluminescence intensity was also observed upon chitosan capping. The electronic band structure and the density of states of the bulk spinel were also calculated using density functional theory. The effective masses of electrons and holes estimated based on the band structure were used to extract the excitonic Bohr radius.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Mineralogical and isotopic constraints on early, high-temperature events and reservoirs recorded in the interior of a Type B Ca-Al-rich inclusion from the reduced CV3 chondrite Vigarano

A coordinated mineralogical and oxygen and Al-Mg isotopic study of a Type B Ca-Al-rich inclusion (CAI) from the reduced CV3 chondrite Vigarano was carried out using electron microprobe analysis, transmission electron microscopy, and secondary ion mass spectrometry. This CAI, a once molten igneous object, shows heterogeneous oxygen isotopic compositions among its constituent mineral phases. Spinel is uniformly 16 O-rich with Δ 17 O ≤ −23 ‰. The Δ 17 O values of Al,Ti-diopside in the CAI core range from −11 ‰ to −18 ‰, which are positively correlated with its TiO 2 contents, whereas diopside in the Wark–Lovering (WL) rim is 16 O-rich with Δ 17 O = −23 ‰. Melilite in the CAI mantle shows Δ 17 O values ≤ −10 ‰ only when Åk <15 but becomes more 16 O-poor (Δ 17 O = −3 ‰ to −9 ‰) when Åk >15 . These correlated chemical and oxygen isotopic variations were likely established during crystallization of melilite and Al,Ti-diopside from a partial melt, while spinel preserves the original 16 O-rich composition of the CAI precursor. We infer that a partial melt was isotopically evolving from 16 O-rich to 16 O-poor during melilite crystallization, then back to 16 O-rich during Al,Ti-diopside crystallization via exchange with different gas reservoirs of 16 O-poor and 16 O-rich compositions during heating event(s). Our Al-Mg isotopic measurements of the CAI core and mantle define a single isochron with an inferred initial 26 Al/ 27 Al ratio of (4.93 ± 0.18) × 10 −5 , indistinguishable from that of the WL rim. This indicates that multiple high-temperature events and oxygen isotope exchange with isotopically distinct gas reservoirs occurred rapidly during the CAI formation.

Al-Mg isotopic systematic↗
DOE OSTI2024

Theoretical Investigation of the Hydrogenation of Cyclohexene Catalyzed by Supported Single-Atom Sites on Redox Noninnocent LiMn 2 O 4 and Li 2 Mn 2 O 4 Surfaces

Here, the tuning of catalyst activity via stereoelectronic modulation of the active-site structure remains a grand challenge in heterogeneous catalysis. In homogeneous catalysis, the redox noninnocent ligands can be introduced to organometallic fragments to donate electrons to the metal center and fine-tune the catalytic activity. Analogously, lithium-ion battery materials, such as lithium manganese oxide (LMO), lithium titanium oxides (LTO), etc., can serve as redox noninnocent catalyst support to modulate the electronic structures of the active site via lithiation, hence tuning the catalytic activity of supported active sites. Experimentally, the Ni single-atom site was supported on LiMn 2 O 4 via oxidative grafting and exhibited no catalytic activity toward the hydrogenation of cyclohexene. After introducing additional Li into the catalyst support forming Li 2 Mn 2 O 4 , the Ni single-atom site becomes active, with the catalytic rates increasing as a function of the lithiation for Li/Mn ratios >0.9. In this paper, density functional theory (DFT) calculations are performed to study the Ni site structure via X-ray absorption near edge structure (XANES) simulations and investigate the electronic properties of Ni single-atom site before and after the addition of intercalated lithium in the LMO spinel structure. Furthermore, the study of the reaction mechanism is also carried out to understand the thermodynamically and kinetically favored pathways. XANES simulation suggests that the Ni single-atom site is likely to stay in the Li channel of the spinel support structure and form an octahedral structure. After Li intercalation, the Ni site becomes less positively charged, indicating the partial reduction of the Ni site. The simulated reaction energy profile over the LiMn 2 O 4 support exhibits high-energy barriers (1.07 eV) for the hydrogenation of cyclohexene; however, the Li 2 Mn 2 O 4 support is able to better stabilize low-coordinated ion sites and improve ion mobility, leading to lower overall energy barriers (0.64 eV). The reduced and low-coordinated ion site, thus, can better stabilize the reaction intermediates and promote hydrogenation reaction. Similarly, other transition metal ions (Fe, Co, and Cu) are also considered over the LiMn 2 O 4 and Li 2 Mn 2 O 4 catalyst supports for hydrogenation reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Hidden Subsurface Reconstruction and Its Atomic Origins in Layered Oxide Cathodes

Structural transformations near surfaces of solid-state materials underpin functional mechanisms of a broad range of applications including catalysis, memory, and energy storage. It has been a long-standing notion that the outmost free surfaces, accompanied by broken translational symmetry and altered atomic configurations, are usually the birthplace for structural transformations. Here, in a layered oxide cathode for Li-ion batteries, we for the first time observe the incipient state of the well documented layered-to-spinel-like structural transformation, which is surprisingly initiated from subsurface layer, rather than the very surface. Coupling atomic level scanning transmission electron microscopy imaging with electron energy loss spectroscopy, we discover that the reconstructed subsurfaces, featuring a mix of discrete patches of layered and spinel-like structures, are associated with selective atomic species partition and consequent nanoscale non-uniform composition gradient distribution at the subsurface. In conclusion, our findings provide fundamental insights on atomic-scale mechanisms of structural transformation in layered cathodes.

25 ENERGY STORAGE↗
DOE OSTI2022

Transition Metal Dissolution Mechanisms and Impacts on Electronic Conductivity in Composite LiNi 0.5 Mn 1.5 O 4 Cathode Films

The high-voltage LiNi 0.5 Mn 1.5 O 4 (LNMO) spinel cathode material offers high energy density storage capabilities without the use of costly Co that is prevalent in other Li-ion battery chemistries (e.g., LiNi x Mn y Co z O 2 (NMC)). Unfortunately, LNMO-containing batteries suffer from poor cycling performance because of the intrinsically coupled processes of electrolyte oxidation and transition metal dissolution that occurs at high voltage. In this work, we use operando electron paramagnetic resonance (EPR) and nuclear magnetic resonance (NMR) spectroscopies to demonstrate that transition metal dissolution in LNMO is tightly coupled to HF formation (and thus, electrolyte oxidation reactions as detected with operando and in situ solution NMR), indicative of an acid-driven disproportionation reaction that occurs during delithiation (i.e., battery charging). Leveraging the temporal resolution (s-min) of magnetic resonance, we find that the LNMO particles accelerate the rate of LiPF 6 decomposition and subsequent Mn 2+ dissolution, possibly due to the acidic nature of terminal Mn-OH groups. X-ray photoemission electron microscopy (XPEEM) provides surface-sensitive and localized X-ray absorption spectroscopy (XAS) measurements, in addition to X-ray photoelectron spectroscopy (XPS), that indicate disproportionation is enabled by surface reconstruction upon charging, which leads to surface Mn 3+ sites on the LNMO particle surface that can disproportionate into Mn 2+ (dissolved) and Mn 4+ (s) . During discharge of the battery, we observe high quantities of metal fluorides (in particular, MnF 2 ) in the cathode electrolyte interphase (CEI) on LNMO as well as the conductive carbon additives in the composite. Electronic conductivity measurements indicate that the MnF 2 decreases film conductivity by threefold compared to LiF, suggesting that this CEI component may impede both the ionic and electronic properties of the cathode. Ultimately, to prevent transition metal dissolution and the associated side reactions in spinel-type cathodes (particularly those that operate at high voltages like LNMO), the use of electrolytes that offer improved anodic stability and prevent acid byproducts will likely be necessary.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Expanding the Ambient-Pressure Phase Space of CaFe 2 O 4 -Type Sodium Postspinel Host–Guest Compounds

CaFe 2 O 4 -type sodium postspinels (Na-CFs), with Na + occupying tunnel sites, are of interest as prospective battery electrodes. While many compounds of this structure type require high-pressure synthesis, several compounds are known to form at ambient pressure. Here we report a large expansion of the known Na-CF phase space at ambient pressure, having successfully synthesized NaCrTiO 4 , NaRhTiO 4 , NaCrSnO 4 , NaInSnO 4 , NaMg 0.5 Ti 1.5 O 4 , NaFe 0.5 Ti 1.5 O 4 , NaMg 0.5 Sn 1.5 O 4 , NaMn 0.5 Sn 1.5 O 4 , NaFe 0.5 Sn 1.5 O 4 , NaCo 0.5 Sn 1.5 O 4 , NaNi 0.5 Sn 1.5 O 4 , NaCu 0.5 Sn 1.5 O 4 , NaZn 0.5 Sn 1.5 O 4 , NaCd 0.5 Sn 1.5 O 4 , NaSc 1.5 Sb 0.5 O 4 , Na 1.16 In 1.18 Sb 0.66 O 4 , and several solid solutions. In contrast to earlier reports, even cations that are strongly Jahn–Teller active (e.g., Mn 3+ and Cu 2+ ) can form Na-CFs at ambient pressure when combined with Sn 4+ rather than with the smaller Ti 4+ . Order and disorder are probed at the average and local length-scales with synchrotron powder X-ray diffraction and solid-state NMR spectroscopy. Strong ordering of framework cations between the two framework sites is not observed, except in the case of Na 1.16 In 1.18 Sb 0.66 O 4 . This compound is the first example of an Na-CF that contains Na + in both the tunnel and framework sites, reminiscent of Li-rich spinels. Trends in the thermodynamic stability of the new compounds are explained on the basis of crystal-chemistry and density functional theory (DFT). Further DFT calculations examine the relative stability of the CF versus spinel structures at various degrees of sodium extraction in the context of electrochemical battery reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Severe Strain‐Induced Olivine‐Ringwoodite Transformation at Room Temperature: Key to Enigmas of Deep‐Focus Earthquake

Deep‐focus earthquakes at 350–660 km are presumably caused by olivine‐spinel phase transformation (PT). This cannot, however, explain the observed high seismic strain rate, which requires PT to complete within seconds, while metastable olivine does not transform for over a million years. Recent theory quantitatively describes how severe plastic deformations (SPD) can solve this dilemma but lacking experimental proof. Here, we introduce dynamic rotational diamond anvil cell with rough diamond anvils to impose SPD on San Carlos olivine. While olivine never transformed to spinel at room temperature, we obtained reversible olivine‐ringwoodite PT under SPD at 15–28 GPa within tens of seconds. The PT pressure reduces with increasing dislocation density, microstrain, plastic strain, and decreasing crystallite size. Results demonstrate a new strain‐induced PT mechanism compared to a pressure/temperature‐induced one. Combined with SPD during olivine subduction, this mechanism can accelerate olivine‐ringwoodite PT from millions of years to timescales relevant to earthquakes.

Lin, F. [Iowa State Univ., Ames, IA (United States↗
DOE OSTI2025

Operando X-ray absorption spectroscopic investigation of electrocatalysts state in anion exchange membrane fuel cells

Capturing the active state of (electro)catalysts under operating conditions, namely operando, is the ultimate objective of (electro)catalyst characterization, enabling the unraveling of reaction mechanisms and advancing (electro)catalyst development. Operando insights advance our understanding of the correlations between electrochemical tests and device-level performances. However, operando characterization of electrocatalysts is challenging due to the complexity of electrochemical devices and instrumental limitations. As a result, the majority of electrocatalyst characterizations have been limited to half-cell in situ studies. Here, we present an operando X-ray absorption spectroscopic study of Mn spinel oxide electrocatalysts in an operating fuel cell employing a custom-designed cell. Our results reveal that in anion exchange membrane fuel cells, the Mn valence state, within spinel Mn 3 O 4 /C, increases to above 3+, adopting an octahedral coordination devoid of Jahn-Teller distortions. This structural change results in an AEMFC performance equivalent to that of Co 1.5 Mn 1.5 O 4 /C, a composition that outperforms Mn 3 O 4 /C in rotating disk electrode tests. Our results underscore the importance of operando characterizations in elucidating the active state of electrocatalysts and understanding the correlation(s) between electrochemical tests and device performance.

Electrocatalysis↗
DOE OSTI2026

Unconventional polaronic ground state in superconducting LiTi 2 O 4

Geometrically frustrated lattices can display a range of correlated phenomena, ranging from spin frustration and charge order to dispersionless flat bands due to quantum interference. One particularly compelling family of such materials is the half-valence spinel LiB 2 O 4 materials. On the B-site frustrated pyrochlore sublattice, the interplay of correlated metallic behavior and charge frustration leads to a superconducting state in LiTi 2 O 4 and heavy fermion behavior in LiV 2 O 4 . To date, however, LiTi 2 O 4 has primarily been understood as a conventional BCS superconductor despite a lattice structure that could host more exotic ground states. Here, we present a multimodal investigation of LiTi 2 O 4 , combining ARPES, RIXS, proximate magnetic probes, and ab-initio many-body theoretical calculations. Our data reveals a novel mobile polaronic ground state with spectroscopic signatures that underlie co-dominant electron-phonon coupling and electron-electron correlations also found in the lightly doped cuprates. The cooperation between the two interaction scales distinguishes LiTi 2 O 4 from other superconducting titanates, suggesting an unconventional origin to superconductivity in LiTi 2 O 4 . Our work deepens our understanding of the rare interplay of electron-electron correlations and electron-phonon coupling in unconventional superconducting systems. In particular, our work identifies the geometrically frustrated, mixed-valence spinel family as an under-explored platform for discovering unconventional, correlated ground states.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Magnetic and structural properties of the solid solution CuAl 2(1–x) Ga 2x O 4

CuAl 2 O 4 is a ternary oxide spinel with Cu 2+ ions (s = 1/2) primarily populating the A-site diamond sublattice. The compound is reported to display evidence of spin glass behavior but possess a non-frozen magnetic ground state below the transition temperature. On the other hand, the spinel CuGa 2 O 4 displays spin glass behavior at ~ 2.5 K with Cu 2+ ions more readily tending to the B-site pyrochlore sublattice. Therefore, we investigate the magnetic and structural properties of the solid solution CuAl 2(1-x) Ga 2x O 4 examining the evolution of the magnetic behavior as Al 3+ is replaced with a much larger Ga 3+ ion. Our results show that the Cu 2+ ions tend to migrate from tetrahedral to octahedral sites as the Ga 3+ ion concentration increases, resulting in a concomitant change in the glassy magnetic properties of the solution. Results indicate glassy behavior for much of the solution with a general trend towards decreasing magnetic frustration as the Cu 2+ ion shifts to the B-site. However, the x = 0.1 and 0.2 members of the system do not show glassy behavior down to our measurement limit (1.9 K) suggesting a delayed spin glass transition. We suggest that these two members are additional candidates for investigation to access highly frustrated exotic quantum states.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

A new halospinel superionic conductor for high-voltage all solid state lithium batteries

We report a new Li-superionic chloride, Li 2 Sc 2/3 Cl 4 , that crystallizes in a disordered spinel structure, and exhibits an ionic conductivity of 1.5 mS cm –1 with a low activation energy barrier for Li + ion diffusion of 0.34 eV. Here, this material is the first spinel-type superionic halide. Structural elucidation via powder neutron diffraction reveals a significantly disordered Li + -ion distribution over available tetrahedral and octahedral sites within the lattice, forming an infinitely 3D connected Li + ion diffusion pathway comprised of face-sharing octahedra and tetrahedra. Due to the high oxidative stability of Li 2 Sc 2/3 Cl 4 , all solid state lithium batteries employing Li 2 Sc 2/3 Cl 4 and high voltage cathodes (LiCoO 2 , LiNi 0.6 Mn 0.2 Co 0.2 O 2 or high-Ni LiNi 0.85 Mn 0.1 Co 0.05 O 2 ) – without any coating – exhibit excellent electrochemical performance up to 4.6 V in terms of capacity retention and cycle life.

25 ENERGY STORAGE↗
DOE OSTI2023

Determination of the vacancy distribution over Al cation sites in γ-Al 2 O 3

Although gamma-alumina (γ-Al 2 O 3 ) is an extensively used material with wide-ranging applications due to its inherently high surface area and acidity, its atomic structure is still not fully understood. γ-Al 2 O 3 is described as having a spinel-like structure, where the O sublattice has a face-centered cubic (FCC) arrangement and Al cations are placed in the spinel tetrahedral and octahedral interstitial sites. Achieving the correct stoichiometry of Al 2 O 3 , however, requires the introduction of Al vacancies into some of the interstitial sites. Despite the importance of accurately describing the structure of γ-Al 2 O 3 , the distribution of vacancies between tetrahedral and octahedral sites remains unclear, in part because of the usually poor crystalline quality of γ-Al 2 O 3 that has often been used in previous studies. To determine the actual cation distribution in γ-Al 2 O 3 , single-crystalline γ-Al 2 O 3 was investigated using a correlative approach of experimental and simulated selected-area electron diffraction (SAED) and high-resolution electron energy-loss spectroscopy (EELS). Comparison of the reflection intensities in single-crystal SAED to simulated SAED from models with varied vacancy distributions revealed that vacancies exist primarily on tetrahedral sites, contrary to the placement of vacancies on octahedral sites proposed in several common models. Comparison of EELS spectra—acquired with the highest energy resolution reported so far for γ-Al 2 O 3 —with ab initio multiple scattering EELS simulations confirmed the distribution of vacancies on tetrahedral sites. These results enable more accurate modeling of γ-Al 2 O 3 to better predict its properties in existing and future applications.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Manganese-rich high entropy oxides for lithium-ion batteries:materials design approaches to address voltage fade

Lithium- and manganese-rich oxides are of interest as lithium-ion battery cathode materials as Mn is earth abundant, low cost, and can deliver high capacity. Herein, a high entropy strategy was used to prepare Mn rich high entropy oxide (HEO) materials by including four additional metals (Ni, Co, Fe and Al) in the compositions using a mild co-precipitation method. Two HEOs (Li x Ni 0.1 Mn 0.6 Co 0.1 Al 0.1 Fe 0.1 O y , where x = 1.5 for HEO-L and x = 0.5 for HEO-H) with layered and spinel-layered hybrid structures were investigated where the morphology, elemental composition, structure, atomic level phase distribution, and electrochemistry were determined. The HEO-L samples involve a Li 2 TMO 3 layered structure with ~39% stacking faults. HEO-H is a hybrid structure comprised of 80 wt% spinel and 20 wt% LiMO 2 layered structure. The high entropy manganese-rich HEO-L showed higher capacity and 93% retention of the average voltage after 100 cycles while HEO-H showed higher capacity retention and near 100% average voltage retention. Finally, operando X-ray absorption spectroscopy revealed that the Ni, Co, and Mn are redox active in both materials while the Fe center remains at the Fe 3+ oxidation state throughout cycling, where the changes in the oxidation states for both materials during discharge were consistent with the delivered electrochemical capacity rationalizing the observed electrochemistry.

25 ENERGY STORAGE↗
DOE OSTI2024

NiGa 2 O 4 interfacial layers in NiO/Ga 2 O 3 heterojunction diodes at high temperature

NiO/Ga 2 O 3 heterojunction diodes have attracted attention for high-power applications, but their high temperature performance and reliability remain underexplored. Here, we report the time evolution of the electrical properties in the widely studied p-NiO/n-Ga 2 O 3 heterojunction diodes and formation of NiGa 2 O 4 interfacial layers at high temperatures. Results of our thermal cycling experiment show an initial leakage current increase which stabilizes after sustained thermal load, due to reactions at the NiO–Ga 2 O 3 interface. High-resolution TEM microstructure analysis of the devices after thermal cycling indicates that the NiO–Ga 2 O 3 interface forms a ternary compound at high temperatures, and thermodynamic calculations suggest the formation of the spinel NiGa 2 O 4 layer between NiO and Ga 2 O 3 . First-principles defect calculations find that NiGa 2 O 4 shows low p-type intrinsic doping and hence can serve to limit electric field crowding at the interface. Vertical NiO/ Ga 2 O 3 diodes with intentionally grown 5 nm thin spinel-type NiGa 2 O 4 interfacial layers show an excellent device ON/OFF ratio of >10 10 (± 3 V), V ON of ~1.9 V, and increased breakdown voltage of ~1.2 kV for an initial unoptimized 300 lm diameter device. These p–n heterojunction diodes are promising for high-voltage, high temperature applications.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2025

Interplay between electron localization, magnetic order, and Jahn-Teller distortion dictates LiMnO2 phase stability

The development of manganese (Mn)-rich cathodes for Li-ion batteries promises to alleviate potential supply chain bottlenecks in battery manufacturing. Fundamental challenges in Mn-rich cathodes arise from phenomena such as structural changes due to cooperative Jahn-Teller (JT) distortions of in octahedral environments, Mn migration, and phase transformations to spinel-like order, all of which affect the electrochemical performance. These physically complex phenomena motivate an re-examination of the Li-Mn-O rock-salt space, with a focus on the thermodynamics of the prototypical, polymorphs. It is found that the generalized gradient approximation (GGA-PBEsol) and meta-GGA ( ) density functionals with empirically fitted on-site Hubbard corrections yield spurious stable phases for , such as predicting a phase with -like order ( ) to be the ground state instead of the orthorhombic (Pmmn) phase, which is the experimentally known ground state. Accounting for antiferromagnetic order in each structure is shown to have a substantial effect on the total energies and resulting phase stability. By using hybrid-GGA (HSE06) and GGA with self-consistent Hubbard parameters (on-site and inter-site ) calculated from linear response theory, the experimentally observed phase stability trends are recovered. The calculated on-site between Mn- states in the experimentally observed orthorhombic, layered, and spinel phases are significantly smaller than in and disordered layered structures, by within GGA. The smaller values of are shown to be correlated with a collinear ordering of JT distortions, in which all orbitals are oriented in the same direction. This cooperative JT effect can lead to greater electron delocalization from Mn along the states due to increased Mn-O covalency, which contributes to the greater electronic stability compared to the phases with noncollinear JT arrangements. The structures with collinear ordering of JT distortions also generate greater vibrational entropy, which helps stabilize these phases at high temperature. These phases are shown to be strongly insulating with large calculated band gaps , which are computed using HSE06 and .

Kam, Ronald L↗