Search NASA⌕ Search

SEARCH · Search NASA

Results for “Comparison study”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
DOE OSTI2017

High temperature gasification of high heating-rate chars using a flat-flame reactor

The increasing interest in gasification and oxy-fuel combustion of biomass has heightened the need for a detailed understanding of char gasification in industrially relevant environments (i.e., high temperature and high-heating rate). Despite innumerable studies previously conducted on gasification of biomass, very few have focused on such conditions. Consequently, in this study the high-temperature gasification behaviors of biomass-derived chars were investigated using non-intrusive techniques. Two biomass chars produced at a heating rate of approximately 10 4 K/s were subjected to two gasification environments and one oxidation environment in an entrained flow reactor equipped with an optical particle-sizing pyrometer. A coal char produced from a common U.S. low sulfur subbituminous coal was also studied for comparison. Both char and surrounding gas temperatures were precisely measured along the centerline of the furnace. Despite differences in the physical and chemical properties of the biomass chars, they exhibited rather similar reaction temperatures under all investigated conditions. On the other hand, a slightly lower particle temperature was observed in the case of coal char gasification, suggesting a higher gasification reactivity for the coal char. A comprehensive numerical model was applied to aid the understanding of the conversion of the investigated chars under gasification atmospheres. In addition, a sensitivity analysis was performed on the influence of four parameters (gas temperature, char diameter, char density, and steam concentration) on the carbon conversion rate. Here, the results demonstrate that the gas temperature is the most important single variable influencing the gasification rate.

09 BIOMASS FUELS↗
DOE OSTI2025

Experiments on a vapor compression air conditioner with liquid desiccants for efficient dehumidification

Buildings require air conditioning systems that not only cool and dehumidify supply air but also provide sufficient ventilation to ensure indoor air quality and occupant comfort. However, standard recirculation systems-which introduce about a 10 % to 20 % fraction of outdoor air-often fail to deliver air that is precisely cooled and dry, particularly because 80-90 % of the ventilation cooling load is latent. Mixing humid ventilation air with recirculated indoor air increases the energy and costs required to condition the air to comfortable levels. Dedicated outdoor air systems (DOASs) are designed to handle this latent dominated ventilation load and thus need to have efficient humidity removal. Many cooling cycles can perform this task. Here we describe a liquid desiccant DOAS, which combines a vapor compression cycle and a liquid desiccant absorber and desorber pair. We present its performance at 26 operating conditions and a thermodynamic model which can accurately predict the moisture removal efficiency. The model's performance predictions have a mean percentage error of 2.5 % and a coefficient of variation of the root mean square error of 7.5 %. We also compare the performance of this vapor-compression-coupled liquid desiccant system with a standard vapor compression system with the same components but no liquid desiccant. For the 26 conditions tested in this study, this comparison shows that adding liquid desiccants lowers the required evaporator cooling load by 21 %, allows for 25 % lower compressor volumetric capacity, and 25 % lower electricity use. Future work will leverage this model to quantify the reduction in annual electricity use across different climates, including the need for a standard vapor compression system to reheat the air during some of the year.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2019

Bio-Inspired adaptive damping in hydrokinetic energy harnessing using flow-induced oscillations

A hydrokinetic energy converter using Flow Induced Oscillations (FIOs) of a one-degree-of-freedom cylinder-oscillator, with nonlinear adaptive damping and linear spring stiffness, is introduced and studied experimentally. Comparison to a linear-oscillator in FIO shows that this new converter, with velocity-proportional damping coefficient, is more effective in galloping, where both flow and cylinder speeds are higher. It also impacts VIV, since the converter is no longer restricted by fixed damping, which results either in ceasing motion due to excessive damping, or in low harnessed energy due to insufficient damping. The impact is most profound in the VIV to galloping transition where adaptive damping prevents shutting down of hydrokinetic energy conversion. Damping-to-velocity rate, linear spring-stiffness, and flow-velocity are the experimental parameters with Reynolds number 30,000 ≤ Re ≤ 120,000. Here, experimental results for amplitude response, frequency response, energy harvesting, efficiency and instantaneous energy of the converter are presented and discussed. The main conclusions are: (1) The nonlinear, adaptive, velocity-proportional damping coefficient increases the harnessed power. (2) The operational range of flow velocities increases. (3) At lower flow speeds, the adaptive damping stabilizes the unstable oscillations typically occurring in this region. (4) At higher flow speeds, adaptive damping results in higher harnessed power than constant damping, thus, better emulating passively a corresponding, natural, active motion by fish. (5) Increase of 51%–95% in converted power by the nonlinear oscillator compared to linear oscillator has been measured. (6) The adaptive damping converter reaches a plateau in harnessed efficiency at high flow velocity (fully developed galloping).

13 HYDRO ENERGY↗
DOE OSTI2026

Sintering effects on NpO 2 grain size and morphology: The role of precursor Np phase

Neptunium dioxide (NpO 2 ) is a key phase in nuclear material processing as a target material for the production of plutonium-238 ( 238 Pu) and has been historically synthesized via the calcination of a Np oxalate precursor. Alternative synthesis methods for NpO 2 are now more prevalent, necessitating their study and comparison with the more common oxalate route. The purpose of this work was to investigate the microstructural properties of NpO 2 synthesized from a nitrate-based Np precursor phase via the assessment of NpO 2 particle size and morphology as a function of calcination temperature and time. Scanning electron microscopy (SEM) was used to probe the primary grain size and morphology of NpO 2 after calcination at temperatures ranging from 700 to 1100 °C and hold times ranging from 1 to 10 h. Post-image analysis using ImageJ software enabled the quantification of mean particle diameter. This analysis indicated that particle diameter increases with both increasing calcination temperature and hold time. Primary particles were shown to be clumped in irregular patterns into the overall rough, blocky aggregates, but this macroscopic morphology was not affected by calcination time or temperature. Although trends in primary grain size of NpO 2 were consistent with available literature from other Np precursor phases, the macroscopic morphology of the NpO 2 aggregates was quite different than reported for other precursors. Through comparison with historical literature on Np oxalate, this work emphasizes the importance of Np precursor on the physical properties of NpO 2 .

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2017

Influence of physical activity on tibial bone material properties in laying hens

Laying hens develop a type of osteoporosis that arises from a loss of structural bone, resulting in high incidence of fractures. In this study, a comparison of bone material properties was made for lines of hens created by divergent selection to have high and low bone strength and housed in either individual cages, with restricted mobility, or in an aviary system, with opportunity for increased mobility. Improvement of bone biomechanics in the high line hens and in aviary housing was mainly due to increased bone mass, thicker cortical bone and more medullary bone. However, bone material properties such as cortical and medullary bone mineral composition and crystallinity as well as collagen maturity did not differ between lines. However, bone material properties of birds from the different type of housing were markedly different. The cortical bone in aviary birds had a lower degree of mineralization and bone mineral was less mature and less organized than in caged birds. Here, these differences can be explained by increased bone turnover rates due to the higher physical activity of aviary birds that stimulates bone formation and bone remodeling. Multivariate statistical analyses shows that both cortical and medullary bone contribute to breaking strengthThe cortical thickness was the single most important contributor while its degree of mineralization and porosity had a smaller contribution. Lastly, bone properties had poorer correlations with mechanical properties in cage birds than in aviary birds presumably due to the greater number of structural defects of cortical bone in cage birds.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

An agent-based modeling tool supporting bioenergy and bio-product community communication regarding cellulosic bioeconomy development

The emergence of the cellulosic bioeconomy requires not only adequate technological, economic, and policy advances, but also effective communication and coordination among the multiple stakeholders in the bioeconomy community. Aiming to facilitate stakeholder communication and collaboration for cellulosic bioeconomy growth, an agent-based model is developed as a community communication tool in this study. The tool simulates the behaviors and interactions of key stakeholders, as well as the responses and interactions between the stakeholders and biophysical, socioeconomic, and environmental conditions. The agent behavior rules are developed and validated based on behavior and economic theories and information attained from a stakeholder focus group study and a land use survey. A pilot study in a Central Illinois watershed shows stakeholder synergies, i.e., positive feedback loops across multiple stakeholders. The modeling tool's role in facilitating community communication is demonstrated via the focus group study. A comparison of policy scenarios suggests that the cellulosic bioeconomy development is fastest under a portfolio of policies combining the views of the multiple stakeholders. Critically, subsidy for small-scale bio-facilities is essential as it rapidly initializes an early market for cellulosic feedstocks and the adoption of Miscanthus. As a result, the communication tool is applied to bringing stakeholders and researchers together to develop shared visions, assess barriers, and explore solution portfolios to initialize and speed up the regional cellulosic bioeconomy.

09 BIOMASS FUELS↗
DOE OSTI2020

Proton Transfer Dynamics in the Aprotic Proton Accepting Solvent 1-Methylimidazole

The dynamics of proton transfer to the aprotic solvent 1-methylimidazole (MeIm, proton acceptor) from the photoacid 8-hydroxypyrene-1,3,6-trisulfonic acid trisodium salt (HPTS) were investigated using fast fluorescence measurements. The closely related molecule, 8- methoxypyrene-1,3,6-trisulfonic acid trisodium salt (MPTS), which is not a photoacid, was also studied for comparison. Following optical excitation, the wavelength-dependent population dynamics of HPTS in MeIm resulting from the deprotonation process were collected over the entire fluorescence emission window. Analysis of the time-dependent fluorescence spectra revealed four distinct fluorescence bands that appear and decay on different time scales. We label these four states as: protonated (P), associated I (A I ), associated II (A II ), and deprotonated (D). We find that the simple kinetic scheme of P → A I → A II → D is not consistent with the data. Instead, the kinetic scheme that describes the data has P decaying into A I , which mainly goes on to deprotonation (D), but AI can also feed into A II . A II can return to A I or decay to the ground state, but does not deprotonate within experimental error. Finally, quantum chemistry and excitedstate QM/MM Born-Oppenheimer molecular dynamics simulations indicate that A I and A II are two H-bonding conformations of MeIm to the HPTS hydroxyl, axial and equatorial, respectively.

14 SOLAR ENERGY↗
DOE OSTI2024

Hydrocarboxylation of C=C Bonds in Polycyclooctene: Progress Toward Valorization of Waste Polyolefins

Upcycling of waste polyolefins into higher-value functional polymers through chemical functionalization is a promising strategy to recover value and minimize their environmental impact. We report the hydrocarboxylation of polycyclooctene as a model for accessing ethylene acrylic acid copolymers (EAA) from waste polyethylene. The effects of various process parameters on the hydrocarboxylation were investigated. The relationship between carboxylic acid concentration and material properties, including crystallinity, melting temperature, glass transition temperature, adhesive properties, and wettability, was studied in comparison to an unfunctionalized polyethylene. Among the catalysts evaluated, Co 2 (CO) 8 exhibited relatively slow kinetics toward the hydrocarboxylation and was not compatible with 2,6-di-tert-butyl hydroxytoluene, a common additive present in commercial polyolefins. PdCl 2 (PPh 3 ) 2 exhibited a higher reactivity toward the hydrocarboxylation, though polymer gelation was observed with extended reaction times or high catalyst loadings. Carboxylic acid incorporation into the polymer was readily controlled by varying the reaction time. Altogether, the resultant COOH-functionalized polyolefins possessed properties analogous to commercial EAA.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Ambient Pressure XPS Investigation of Thermally Stable Halide Perovskite Solar Cells via Post-Treatment

Long-term thermal stability is one limiting factor that impedes the commercialization of perovskite solar cell. Inspired by our prior results from machine learning, we discover that coating a thin layer of 4,4’-dibromotriphenylamine (DBTPA) on top of a CH 3 NH 3 PbI 3 (MAPbI 3 ) thin film can improve the stability of the resultant perovskite solar cells. The passivated perovskite solar cells retained more than 96% of their initial power conversion efficiency over 1000 h at 85 °C in N2 atmosphere without encapsulation. Near-ambient pressure x-ray photoelectron spectroscopy (NAP-XPS) was employed to investigate the evolution of composition and evaluate thermal and moisture stability by in-situ studies. A comparison between pristine MAPbI 3 films and DBTPA-treated films shows the DBTPA treatment suppresses the escape of iodide and methylamine up to 150 °C under 5 mbar humidity. Furthermore, we have used ATR-FTIR and XPS to probe the interactions between DBTPA and MAPbI3 surface. The results prove that DBTPA coordinate with perovskite by Lewis acid-base and cation-π interaction. Compared with the 19.9% efficiency of pristine sample, the champion efficiency of passivated sample reaches 20.6%. Finally, our results reveal DBTPA as a new post-treating molecule that not only leads to the improvement of photovoltaic efficiency but also thermal and moisture stability.

14 SOLAR ENERGY↗
DOE OSTI2017

A communal catalogue reveals Earth’s multiscale microbial diversity

Our growing awareness of the importance and diversity of the microbial world contrasts starkly with our limited understanding of its fundamental structure. Despite remarkable advances in DNA sequence generation, a lack of standardized protocols and common analytical framework impede useful comparison between studies, hindering development of global inferences about microbial life on Earth. Here, we show that with coordinated protocols, exact microbial 16S rRNA gene sequences can be followed across scores of individual studies, revealing patterns of diversity, community structure, and life history strategy at a planetary scale. Using 27,751 crowdsourced environmental samples comprising more than 2.2 billion reads, we find sharp divides between host-associated and free-living communities. We show that the distribution of taxonomic and sequence diversity follows consistent trends across samples types and along gradients of environmental parameters, highlighting some of the global evolutionary patterns and ecological principles that underpin Earth’s microbiome. Here, this dataset provides the most complete environmental survey of our microbial world to date, and serves as a growing reference to provide immediate global context to future microbial surveys.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2019

Long-term nutrient inputs shift soil microbial functional profiles of phosphorus cycling in diverse agroecosystems

Microorganisms play an important role in soil phosphorus (P) cycling and regulation of P availability in agroecosystems. However, the responses of the functional and ecological traits of P-transformation microorganisms to long-term nutrient inputs are largely unknown. This study used metagenomics to investigate changes in the relative abundance of microbial Ptransformation genes at four long-term experimental sites that received various inputs of N and P nutrients (up to 39 years). Long-term P input increased microbial P immobilization by decreasing the relative abundance of the P-starvation response gene (phoR) and increasing that of the low-affinity inorganic phosphate transporter gene (pit). This contrasts with previous findings that low-P conditions facilitate P immobilization in culturable microorganisms in short-term studies. In comparison, long-term nitrogen (N) input significantly decreased soil pH, and consequently decreased the relative abundances of total microbial P-solubilizing genes and the abundances of Actinobacteria, Gammaproteobacteria, and Alphaproteobacteria containing genes coding for alkaline phosphatase, and weakened the connection of relevant key genes. This challenges the concept that microbial P-solubilization capacity is mainly regulated by N:P stoichiometry. It is concluded that long-term N inputs decreased microbial P-solubilizing and mineralizing capacity while P inputs favored microbial immobilization via altering the microbial functional profiles, providing a novel insight into the regulation of P cycling in sustainable agroecosystems from a microbial perspective.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Standardized multi-omics of Earth’s microbiomes reveals microbial and metabolite diversity

Despite advances in sequencing, lack of standardization makes comparisons across studies challenging and hampers insights into the structure and function of microbial communities across multiple habitats on a planetary scale. Here we present a multi-omics analysis of a diverse set of 880 microbial community samples collected for the Earth Microbiome Project. We include amplicon (16S, 18S, ITS) and shotgun metagenomic sequence data, and untargeted metabolomics data (liquid chromatography-tandem mass spectrometry and gas chromatography mass spectrometry). We used standardized protocols and analytical methods to characterize microbial communities, focusing on relationships and co-occurrences of microbially related metabolites and microbial taxa across environments, thus allowing us to explore diversity at extraordinary scale. In addition to a reference database for metagenomic and metabolomic data, we provide a framework for incorporating additional studies, enabling the expansion of existing knowledge in the form of an evolving community resource. We demonstrate the utility of this database by testing the hypothesis that every microbe and metabolite is everywhere but the environment selects. Our results show that metabolite diversity exhibits turnover and nestedness related to both microbial communities and the environment, whereas the relative abundances of microbially related metabolites vary and co-occur with specific microbial consortia in a habitat-specific manner. We additionally show the power of certain chemistry, in particular terpenoids, in distinguishing Earth’s environments (for example, terrestrial plant surfaces and soils, freshwater and marine animal stool), as well as that of certain microbes including Conexibacter woesei (terrestrial soils), Haloquadratum walsbyi (marine deposits) and Pantoea dispersa (terrestrial plant detritus). This Resource provides insight into the taxa and metabolites within microbial communities from diverse habitats across Earth, informing both microbial and chemical ecology, and provides a foundation and methods for multi-omics microbiome studies of hosts and the environment.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2018

Inorganic Ba-Sn Nanocomposite Materials for Sulfate Sequestration from Complex Aqueous Solutions

Selective sequestration of sulfate (SO42-) in the form of barite (BaSO4) from alkaline solutions of high ionic strength containing carbonate at high concentrations resembling legacy radioactive waste generated during plutonium cold war era production is problematic due to the preferential formation of BaCO3. Incorporation of sulfate into the insoluble and thermally stable BaSO4 phase can potentially benefit radioactive waste processing in reducing operational challenges and suppressing volatilization of other waste components such as technetium-99. To enhance selectivity of SO42- sequestration, a series of Ba(II)-Sn(IV) materials was prepared using simple hydrothermal synthesis from different Sn(II) and Sn(IV) precursors. Structural characterization indicated that all obtained products predominantly contained BaSn(OH)6 and Ba2SnO2(OH)4(H2O)10 crystalline phases which were disrupted upon exposure to SO42- due to formation of BaSO4. Performance of the Ba(II)-Sn(IV) materials was tested using complex alkaline solutions simulating radioactive waste containing 0.094 M SO42- and 0.5 M CO32- among other constituents. About 54 – 66% of SO42- was converted to BaSO4 when a quantity of Ba(II)-Sn(IV) material containing approximately a stoichiometric amount of Ba2+ relative to SO42- was used. In comparison, previous studies indicate negligible BaSO4 formation under similar conditions when a simple Ba2+ salt is used. This improvement is attributed to the selective replacement of the Ba(II) stannate by SO42-. Thermal stability of the sulfate-loaded product material up to 1100 °C was demonstrated. Obtained materials offer a convenient and economical option for the selective sequestration or removal of SO42- from carbonate containing solutions.

Johnson, Isaac↗
DOE OSTI2018

Self-modulation oscillations in a solid-state coupled-cavity ring laser

We propose a theoretical model describing the radiation dynamics in a solid-state coupled-cavity ring laser. Based on the numerical simulation conducted within the framework of this model, we investigate antiphase harmonic oscillations of counterpropagating wave intensities. It is shown that the amplitudes and frequencies of self-modulation oscillations in cases of in-phase and antiphase cavity couplings differ significantly. In the case of antiphase coupling, a new possibility of increasing the scale factor with increasing perimeter of the additional cavity is found. The dependence of the frequency of self-modulation oscillations on the optical nonreciprocity produced in the main cavity by a constant magnetic field is studied experimentally. Comparison of experimental and theoretical results shows good agreement between theory and experiment. (lasers)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Triple integrated laser – thyristor

A triple laser – thyristor, i. e., a semiconductor laser with three emitting sections monolithically integrated with an electronic switch (thyristor) is experimentally studied. For comparison, the output characteristics of single and double laser – thyristors are presented. It is shown that the functional integration of a laser with a thyristor in one heterostructure allows the laser to efficiently operate in a pulsed regime (output power ∼50 W), the use of vertical integration of two laser sections increases the power to ∼90 W, and the integration of three laser sections makes it possible to increase the output optical power to ∼120 W with all other conditions being the same. (paper)

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Independent normalization for γ -ray strength functions: The shape method

Here, the shape method, a novel approach to obtain the functional form of the γ-ray strength function (γSF), is introduced. In connection with the Oslo method the slope of the nuclear level density (NLD) and γSF can be obtained simultaneously even in the absence of neutron resonance spacing data. The foundation of the shape method lies in the primary γ-ray transitions which preserve information on the functional form of the γSF. The shape method has been applied to 56 Fe, 92 Zr, and 164 Dy, which are representative cases for the variety of situations encountered in typical NLD and γSF studies. The comparisons of results from the shape method to those from the Oslo method demonstrate that the functional form of the γSF is retained regardless of nuclear structure details or J π values of the states fed by the primary transitions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Employing ternary fission of Pu 242 as a probe of very neutron-rich matter

Detailed assessments of the ability of recent theoretical approaches to modeling existing experimental data for ternary fission confirm earlier indications that the dominant mode of cluster formation in ternary fission is clusterization in very neutron rich, very low density, essentially chemically equilibrated, nucleonic matter. An extended study and comparison of these approaches applied to ternary fission yields in the thermal neutron induced reaction 241 Pu(n th ,f) has been undertaken to refine the characterization of the source matter. Here, the resonance gas approximation has been improved taking in-medium effects on the binding energies into account. A temperature of 1.29 MeV, density of 6.7 × 10 -5 nucleons/fm 3 and proton fraction Y p = 0.035 are found to provide a good representation of yields of the ternary emitted light particles and clusters. In particular, results for Z = 1 and 2 isotopes are presented. Isotopes with larger Z are discussed, and the roles of medium and continuum effects, even at very low density are illustrated.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗