Search NASA⌕ Search

SEARCH · Search NASA

Results for “Reference Model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Digital adaptive control laws for VTOL aircraft

Honeywell has designed a digital self-adaptive flight control system for flight test in the VALT Research Aircraft (a modified CH-47). The final design resulted from a comparison of two different adaptive concepts: one based on explicit parameter estimates from a real-time maximum likelihood estimation algorithm and the other based on an implicit model reference adaptive system. The two designs are compared on the basis of performance and complexity.

Hartmann, G. L.↗

Aerodynamic interactions from reaction controls for lateral control of the M2-F2 lifting-body entry configuration at transonic and supersonic and supersonic Mach numbers

Tests were conducted in the Ames 6 by 6 foot wind tunnel to determine the interaction of reaction jets for roll control on the M2-F2 lifting-body entry vehicle. Moment interactions are presented for a Mach number range of 0.6 to 1.7, a Reynolds number range of 1.2 x 10 to the 6th power to 1.6 x 10 to the 6th power (based on model reference length), an angle-of-attack range of -9 deg to 20 deg, and an angle-of-sideslip range of -6 deg to 6 deg at an angle of attack of 6 deg. The reaction jets produce roll control with small adverse yawing moment, which can be offset by horizontal thrust component of canted jets.

Bailey, R. O.↗

Digital adaptive controllers for VTOL vehicles. Volume 1: Concept evaluation

A digital self-adaptive flight control system was developed for flight test in the VTOL approach and landing technology (VALT) research aircraft (a modified CH-47 helicopter). The control laws accept commands from an automatic on-board guidance system. The primary objective of the control laws is to provide good command-following with a minimum cross-axis response. Three attitudes and vertical velocity are separately commanded. Adaptation of the control laws is based on information from rate and attitude gyros and a vertical velocity measurement. The final design resulted from a comparison of two different adaptive concepts--one based on explicit parameter estimates from a real-time maximum-likelihood estimation algorithm, the other based on an implicit model reference adaptive system. The two designs were compared on the basis of performance and complexity.

Hartmann, G. L.↗

Digital adaptive controllers for VTOL vehicles. Volume 2: Software documentation

The VTOL approach and landing test (VALT) adaptive software is documented. Two self-adaptive algorithms, one based on an implicit model reference design and the other on an explicit parameter estimation technique were evaluated. The organization of the software, user options, and a nominal set of input data are presented along with a flow chart and program listing of each algorithm.

Hartmann, G. L.↗

Robotic manipulator control systems with invariant dynamic characteristics

The paper deals with robotic manipulator control systems with dynamic characteristics. It is shown that using model reference adaptive control techniques makes it possible to develop control algorithms which will maintain uniformly high performance over a wide range of system motions and payloads.

Dubowsky, D.↗

Benefits and costs of low thrust propulsion systems

The results of costs/benefits analyses of three chemical propulsion systems that are candidates for transferring high density, low volume STS payloads from LEO to GEO are reported. Separate algorithms were developed for benefits and costs of primary propulsion systems (PPS) as functions of the required thrust levels. The life cycle costs of each system were computed based on the developmental, production, and deployment costs. A weighted criteria rating approach was taken for the benefits, with each benefit assigned a value commensurate to its relative worth to the overall system. Support costs were included in the costs modeling. Reference missions from NASA, commercial, and DoD catalog payloads were examined. The program was concluded reliable and flexible for evaluating benefits and costs of launch and orbit transfer for any catalog mission, with the most beneficial PPS being a dedicated low thrust configuration using the RL-10 system.

Robertson, R. I.↗

Advanced leading edge thermal-structure concept. Direct bond reusable surface insulation to a composite structure

An advanced leading-edge concept was analyzed using the space shuttle leading edge system as a reference model. The comparison indicates that a direct-bond system utilizing a high temperature (2700 F) fibrous refractory composite insulation tile bonded to a high temperature (PI/graphite) composite structure can result in a weight savings of up to 800 lb. The concern that tile damage or loss during ascent would result in adverse entry aerodynamics if a leading edge tile system were used is addressed. It was found from experiment that missing tiles (as many as 22) on the leading edge would not significantly affect the basic force-and-moment aerodynamic coefficients. Additionally, this concept affords a degree of redundancy to a thermal protection system in that the base structure (being a composite material) ablates and neither melts nor burns through when subjected to entry heating in the event tiles are actually lost or damaged during ascent.

Riccitiello, S. R.↗

Some applications of direct adaptive control to large structural systems

Direct multivariable model reference adaptive control (DMMRAC) applications are considered with a representative example of a large structural system (LSS). Such applications have in the past been shown to be feasible for multivariable systems, provided that there exists a constant feedback gain matrix such that the resulting input-output transfer function is (simply) positive real.

Bar-Kana, I.↗

The NASA data systems standardization program - Rationale and scope

A simple, top level logical reference model of the NASA Space Transportation System's end-to-end data system is being developed which can identify the functions and services of the system. Each function or service may be mapped into specific physical subsystems, so that interface relationships are evident and 'standard' protocols may be identified for development. By means of this interface standardization, subsystems can be designed not only independently and in parallel, but with confidence that when the subsystems are aggregated, the end-to-end system will operate efficiently and at low cost. This standardization effort has thus far been principally directed toward space-to-ground communications links.

Smylie, R. E.↗

The relationship between the Zames representation and LQG compensators

Recently Zames (1981) has introduced the so-called model reference transformation which can be used to conveniently parameterize the class of linear time-invariant multivariable compensators that lead to stable feedback control systems. A very popular design methodology for designing stable and robust multivariable control systems is that based on the Linear-Quadratic-Gaussian (LQG) methodology with Loop Transfer Recovery (LTR). Thus, it is natural to inquire upon the relationship between the Zames representation and the LQG/LTR compensators. This paper summarizes this relationship.

Athans, M.↗

Robustness studies in adaptive control

It has been shown that several similar Model Reference Adaptive Controllers (MRAC's) are globally stable under certain restrictive assumptions, including the assumption that the order and relative degree of the plant are exactly known, and that no disturbances are present. Under certain 'sufficiently rich' excitation conditions, the origin is globally asymptotically stable for the adaptive controller parameter error. The time-evolution of the parameter error vector represents the key factor to the stability of the adaptive controller. This time-evolution is described by a complicated set of time-varying nonlinear differential equations. The present investigation is concerned with an approximate analysis technique for studying the long term trends of the parameter error vector trajectory for an adaptive controller under periodic excitation.

Krause, J.↗

A high-speed, large-capacity, 'jukebox' optical disk system

Two optical disk 'jukebox' mass storage systems which provide access to any data in a store of 10 to the 13th bits (1250G bytes) within six seconds have been developed. The optical disk jukebox system is divided into two units, including a hardware/software controller and a disk drive. The controller provides flexibility and adaptability, through a ROM-based microcode-driven data processor and a ROM-based software-driven control processor. The cartridge storage module contains 125 optical disks housed in protective cartridges. Attention is given to a conceptual view of the disk drive unit, the NASA optical disk system, the NASA database management system configuration, the NASA optical disk system interface, and an open systems interconnect reference model.

Ammon, G. J.↗

A comparative study of linear and nonlinear MIMO feedback configurations

In this paper, a comparison is conducted of several feedback configurations which have appeared in the literature (e.g. unity-feedback, model-reference, etc.). The linear time-invariant multi-input multi-output case is considered. For each configuration, the stability conditions are specified, the relation between achievable I/O maps and the achievable disturbance-to-output maps is examined, and the effect of various subsystem perturbations on the system performance is studied. In terms of these considerations, it is demonstrated that one of the configurations considered is better than all the others. The results are then extended to the nonlinear multi-input multi-output case.

Desoer, C. A.↗

Standards for space data systems

NASA has chaired the Consultative Committee for Space Data Systems (CCSDS) for the past four years. During that time, a top-level, end-to-end reference model for space data sytems has been developed that identifies the functions anad services which must be provided by space data systems, and defines the interfaces between major functional elements. A group of definitions for standard protocols has been derived by analyzing these interfaces, and a set of detailed guidelines for space data system standards is in the final stages of negotiation among member CCSDS agencies. Two guidelines that address packet telemetry and channel coding have been approved and are being incorporated into the internal standards of member agencies. Others (packet telecommand, time code, standards data format unit) are in review within CCSDS technical panels and will soon be submitted for approval. These guidelines provide a mechanism for significant cost savings in the implementation of space data systems by allowing reuse of hardware and software for different payloads and for missions, and by enabling the substitution of new technology/higher performance elements at key points in the data system without causing major perturbations in the remainder of the system.

Connell, E. B.↗

Atmospheric CH4, CO and OH from 1860 to 1985

Studies have shown that atmospheric methane, CO and the gaseous OH radical are interdependent: if CH4, CO or OH is perturbed, background concentrations of the other two constituents are affected. Perturbations to OH alter photooxidation rates of numerous natural and anthropogenic trace gases and affect lifetimes of those species that pass from the earth's surface to the free troposphere and stratosphere. It is now known that global atmospheric methane concentrations are increasing; less definite data suggest that carbon monoxide is also increasing. Even before the measurements reported in nine literature references, modeling studies of CH4-CO-OH coupling had led to predictions (Chameides, Liu and Ciceronne, 1977; Sze, 1977; and Hameed, Pinto and Stewart 1979) of future increases of CH4 and CO. A photochemical model is used to look backwards in time by simulating the trace-gas composition of the unpolluted troposphere at the start of the industrial era (taken as 1860) and at intervals up to 1985. It is found that the OH concentration in the background troposphere has decreased significantly and O3 has increased due to increases of CH4 and CO; calculated changes depend on temporal trends of NOx (NOx = NO + NO2), for which no historical data are available. The calculations allow recent trace-gas trends affecting background chemistry and climate to be viewed in a longer-term context.

Thompson, A. M.↗

New stability theorems for averaging and their application to the convergence analysis of adaptive identification and control schemes

New stability theorems are developed for the convergence analysis of a class of one and two-time scale time-varying nonlinear systems using averaging theory. These theorems are applied to a class of continuous time adaptive identifiers and model reference adaptive controllers to obtain estimates of the parameter rate of exponential convergence.

Fu, L.-C.↗

Nonlinear attitude control of flexible spacecraft under disturbance torque

A control law for large-angle single-axis rotational maneuvers of a spacecraft-beam-tip body (an antenna or a reflector) configuration is presented. It is assumed that an unknown but bounded disturbance torque is acting on the spacecraft. A model reference adaptive torque control law is derived for the slewing of the space vehicle. This controller includes a dynamic system in the feedback path and requires only attitude angle and rate of the space vehicle for feedback. For damping out the elastic motion excited by the slewing maneuver, a stabilizer is designed assuming that a torquer and a force actuator are available at the tip body. The stabilizer uses only the flexible modes for the synthesis of the control law. Simulation results are presented to show that fast, large-angle rotational maneuvers can be performed using the adaptive controller and the stabilizer in spite of the presence of continuously acting unknown torque on the spacecraft.

Singh, Sahjendra N.↗

Necessary and sufficient conditions for parameter convergence in adaptive control

Using Generalized Harmonic Analysis, a complete description of parameter convergence in Model Reference Adaptive Control (MRAC) is given in terms of the spectrum of the exogenous reference input signal. Roughly speaking, if the reference signal 'contains enough frequencies' then the parameter vector converges to its correct value. If not, it converges to an easily characterizable subspace in parameter space.

Boyd, Stephen↗