Search NASA⌕ Search

SEARCH · Search NASA

Results for “Reference Model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS2018

Time-Varying Modification of Reference Model for Adaptive Control with Performance Optimization

This paper presents a new adaptive control ap- proach that involves a performance optimization objective. The control synthesis involves the design of a performance optimizing adaptive controller from a subset of control inputs. The resulting effect of the performance optimizing adaptive controller is to modify the initial reference model into a time-varying reference model which satisfies the performance optimization requirement obtained from an optimal control problem. The time-varying reference model modification is accomplished by the real-time solutions of the time-varying Riccati and Sylvester equations coupled with the least-squares parameter estimation of the sen- sitivities of the performance metric. The effectiveness of the proposed method is demonstrated by an application of maneuver load alleviation control for a flexible aircraft.

Adaptive Control↗
NASA NTRS2009

Predictor-Based Model Reference Adaptive Control

This paper is devoted to robust, Predictor-based Model Reference Adaptive Control (PMRAC) design. The proposed adaptive system is compared with the now-classical Model Reference Adaptive Control (MRAC) architecture. Simulation examples are presented. Numerical evidence indicates that the proposed PMRAC tracking architecture has better than MRAC transient characteristics. In this paper, we presented a state-predictor based direct adaptive tracking design methodology for multi-input dynamical systems, with partially known dynamics. Efficiency of the design was demonstrated using short period dynamics of an aircraft. Formal proof of the reported PMRAC benefits constitute future research and will be reported elsewhere.

Lavretsky, Eugene↗
NASA NTRS1973

Model-reference adaptive control system design technique

This paper considers the model-reference adaptive control problem which has received considerable attention in the literature in the last few years. An adaptive control scheme is proposed which has terms in the Liapunov function used in the design procedure which are not included in previously proposed schemes. The relationship of this new scheme to existing schemes is shown by considering the root-loci of the linearized error equations between plant and model. Finally, a second order example is given which illustrates the difference between the two previously proposed model-reference adaptive methods and the one proposed in this paper.

Sutherlin, D. W.↗
NASA NTRS1983

Model reference adaptive control of large structural systems

Attention is given to model reference adaptive control procedures that do not require explicit parameter identification for large structural systems. Even though such applications have been shown to be feasible for multivariable systems, provided there exists a feedback gain matrix that makes the resulting input/output transfer function strictly positive real, it is shown here that this constraint is overly restrictive and that only positive realness is required. Subsequent consideration of a simply supported beam reveals that if actuators and sensors are collocated, then the positive realness constraint will be satisfied and the model reference adaptive control will then indeed be suitable for velocity following when only velocity sensors are available and for both position and velocity following when velocity plus scaled position outputs are measured. For both cases, all states are guaranteed to be stable, regardless of system dimension.

Bar-Kana, I.↗
NASA NTRS1971

Time domain and frequency domain design techniques for model reference adaptive control systems

Some problems associated with the design of model-reference adaptive control systems are considered and solutions to these problems are advanced. The stability of the adapted system is a primary consideration in the development of both the time-domain and the frequency-domain design techniques. Consequentially, the use of Liapunov's direct method forms an integral part of the derivation of the design procedures. The application of sensitivity coefficients to the design of model-reference adaptive control systems is considered. An application of the design techniques is also presented.

Boland, J. S., III↗
NASA NTRS1981

Panel C report: Standards needed for the use of ISO Open Systems Interconnection - basic reference model

The use of an International Standards Organization (ISO) Open Systems Interconnection (OSI) Reference Model and its relevance to interconnecting an Applications Data Service (ADS) pilot program for data sharing is discussed. A top level mapping between the conjectured ADS requirements and identified layers within the OSI Reference Model was performed. It was concluded that the OSI model represents an orderly architecture for the ADS networking planning and that the protocols being developed by the National Bureau of Standards offer the best available implementation approach.

Source record↗
NASA NTRS1993

A reference model for scientific information interchange

This paper presents an overview of an Information Interchange Reference Model (IIRM) currently being developed by individuals participating in the Consultative Committee for Space Data Systems (CCSDS) Panel 2, the Planetary Data Systems (PDS), and the Committee on Earth Observing Satellites (CEOS). This is an ongoing research activity and is not an official position by these bodies. This reference model provides a framework for describing and assessing current and proposed methodologies for information interchange within and among the space agencies. It is hoped that this model will improve interoperability between the various methodologies. As such, this model attempts to address key information interchange issues as seen by the producers and users of space-related data and to put them into a coherent framework. Information is understood as the knowledge (e.g., the scientific content) represented by data. Therefore, concern is not primarily on mechanisms for transferring data from user to user (e.g., compact disk read-only memory (CD-ROM), wide-area networks, optical tape, and so forth) but on how information is encoded as data and how the information content is maintained with minimal loss or distortion during transmittal. The model assumes open systems, which means that the protocols or methods used should be fully described and the descriptions publicly available. Ideally these protocols are promoted by recognized standards organizations using processes that permit involvement by those most likely to be affected, thereby enhancing the protocol's stability and the likelihood of wide support.

Reich, Lou↗
NASA NTRS2010

Predictor-Based Model Reference Adaptive Control

This paper is devoted to the design and analysis of a predictor-based model reference adaptive control. Stable adaptive laws are derived using Lyapunov framework. The proposed architecture is compared with the now classical model reference adaptive control. A simulation example is presented in which numerical evidence indicates that the proposed controller yields improved transient characteristics.

Lavretsky, Eugene↗
NASA NTRS1991

Model reference adaptive control of robots

This project presents the results of controlling two types of robots using new Command Generator Tracker (CGT) based Direct Model Reference Adaptive Control (MRAC) algorithms. Two mathematical models were used to represent a single-link, flexible joint arm and a Unimation PUMA 560 arm; and these were then controlled in simulation using different MRAC algorithms. Special attention was given to the performance of the algorithms in the presence of sudden changes in the robot load. Previously used CGT based MRAC algorithms had several problems. The original algorithm that was developed guaranteed asymptotic stability only for almost strictly positive real (ASPR) plants. This condition is very restrictive, since most systems do not satisfy this assumption. Further developments to the algorithm led to an expansion of the number of plants that could be controlled, however, a steady state error was introduced in the response. These problems led to the introduction of some modifications to the algorithms so that they would be able to control a wider class of plants and at the same time would asymptotically track the reference model. This project presents the development of two algorithms that achieve the desired results and simulates the control of the two robots mentioned before. The results of the simulations are satisfactory and show that the problems stated above have been corrected in the new algorithms. In addition, the responses obtained show that the adaptively controlled processes are resistant to sudden changes in the load.

Steinvorth, Rodrigo↗
NASA NTRS2021

Non-Causal Controller Approximation Methodology Augmented with Model Reference Control – Robust Design

This paper describes the development of a new control design methodology based on a non-causal controller structure and its approximation. The non-causal controller design is based on a loop shaping approach. Partial fraction decomposition is used, along with derivative approximations, to derive a proper transfer function design for a causal control structure. The premise for this non-causal control methodology is that the phase delay as a function of frequency ideally remains within approximately -90o, which tends to make the system robustly stable to uncertainties in the plant dynamics. To have a predictable control system response in lieu of the tolerance of this methodology to relatively large uncertainty in the plant dynamics, the approach is augmented with model reference control. The addition of model reference control can potentially further enhance the robustness of the design. A control system design example is presented in this paper, along with simulation results, to demonstrate the high degree of robustness of this non-causal methodology and its augmentation.

Control Systems↗
NASA NTRS2018

A Standard Reference Model for Data Archives

An implementable Data Archive Architecture is being developed for trusted digital repositories based on the Reference Model for an Open Archival Information System (OAIS) – ISO 14721. A set of interoperable protocols and interface specifications are planned that will offer capabilities for accessing, merging, and re-using data, both within and across the operational boundaries of trustworthy digital repositories. The model will also provide support for the fundamental scientific need to verify the reproducibility of results. This standards development task is being performed by the Data Archive Interoperability (DAI) working group within the Consultative Committee for Space Data Systems (CCSDS). The architecture integrates concepts from the OAIS Reference Model, the ISO/IEC 11179 Metadata Registry (MDR) standard, the CCSDS Reference Architecture for Space Information Management (RASIM), the proposed draft recommended practice document, Information Preparation to Enable Long Term Use (IPELTU), and three decades of digital repository development for science research.

Ambacher, Bruce↗
NASA NTRSDate not supplied

Time-Varying Reference Model Modification of Adaptive Control with Multi-Objective Performance Optimization

This paper presents an adaptive control approach that modifies a reference model in order to satisfy a multi-objective optimization of two performance signals: a linear signal and a quadratic signal. The time varying reference model modification is accomplished by the real-time solutions of the time-varying Riccati and Sylvester equations coupled with the least-squares parameter estimation of the sensitivities of the performance signals to be minimized. The effectiveness of the proposed method is to be demonstrated by a flight control application of maneuver load alleviation and drag minimization.

Adaptive Control↗
NASA NTRS1990

Method For Model-Reference Adaptive Control

Relatively simple method of model-reference adaptive control (MRAC) developed from two prior classes of MRAC techniques: signal-synthesis method and parameter-adaption method. Incorporated into unified theory, which yields more general adaptation scheme.

Seraji, Homayoun↗
NASA NTRS1988

Model reference, sliding mode adaptive control for flexible structures

A decentralized model reference adaptive approach using a variable-structure sliding model control has been developed for the vibration suppression of large flexible structures. Local models are derived based upon the desired damping and response time in a model-following scheme, and variable structure controllers are then designed which employ colocated angular rate and position feedback. Numerical simulations have been performed using NASA's flexible grid experimental apparatus.

Yurkovich, S.↗
NASA NTRS1993

Background stratospheric aerosol and polar stratospheric cloud reference models

A global aerosol climatology is evolving from the NASA satellite experiments SAM II, SAGE I, and SAGE II. In addition, polar stratospheric cloud (PSC) data have been obtained from these experiments over the last decade. An undated reference model of the optical characteristics of the background aerosol is described and a new aerosol reference model derived from the latest available data is proposed. The aerosol models are referenced to the height above the tropopause. The impact of a number of volcanic eruptions is described. In addition, a model describing the seasonal, longitudinal, and interannual variations in PSCs is presented.

Mccormick, M. P.↗
DOE OSTI2023

Convergence Rate of Model Reference Adaptive Control with Application to Building HVAC Systems

Model reference adaptive control (MRAC) has been studied for decades and successfully applied in multiple areas, including heating, ventilation, and air conditioning (HVAC) systems for buildings. MRAC is efficient in capturing the time-varying characteristics of buildings' indoor temperatures and outdoor weather environments. In this paper, the rate of convergence of MRAC is investigated, where a direct adaptive control with temperature set point reference tracking is used to regulate the indoor temperatures for buildings. Numerical results show that by controlling the HVAC systems of residential buildings using MRAC, the indoor temperatures converge Q-sublinearly to the desired temperature set points. In addition, the rate of convergence for MRAC is compared with a baseline adaptive model-free control method.

Wu, Tumin↗
NASA NTRS1993

A reference model for space data system interconnection services

The widespread adoption of standard packet-based data communication protocols and services for spaceflight missions provides the foundation for other standard space data handling services. These space data handling services can be defined as increasingly sophisticated processing of data or information received from lower-level services, using a layering approach made famous in the International Organization for Standardization (ISO) Open System Interconnection Reference Model (OSI-RM). The Space Data System Interconnection Reference Model (SDSI-RM) incorporates the conventions of the OSIRM to provide a framework within which a complete set of space data handling services can be defined. The use of the SDSI-RM is illustrated through its application to data handling services and protocols that have been defined by, or are under consideration by, the Consultative Committee for Space Data Systems (CCSDS).

Pietras, John↗