Search NASA⌕ Search

SEARCH · Search NASA

Results for “Spring”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1966

Compression springs at elevated temperatures

The behavior of compression springs is affected by increased temperatures. The most significant factors affecting springs are a loss of load and length (relaxation), and a change in the modulus of rigidity. Relaxation will reduce preset loads or change the location of supported components whereas a change in the modulus of rigidity will alter the spring rate. Both factors must be taken into account when designing compression springs. Curves and equations are presented (for music wire, 18-8 stainless steel, 17-7 PH, and Inconel-X) which can aid in the design of compression springs for use at elevated temperatures.

Spring↗
NASA NTRS2016

Characterization of Potential Springs in the Lower Colorado Desert of Southern California using Satellite Radar and Landsat Time Series Analysis

Renewable energy development in southern California is receiving increasing attention due to potential impacts on wildlife habitats and water sources. This study was designed to quantify and map, for the first time, sub-surface water sources from springs in the Lower Colorado Desert area of southern California using satellite radar data and 30 years of Landsat satellite image data. Synthetic Aperture Radar (SAR) data was used to identify sub-surface water sources not already documented as springs or seeps in the National Hydrography Database. Landsat imagery starting in 1985 was used to characterize vegetation growth patterns at these suspected spring locations detected from SAR analysis. Results showed a total of 104 potential spring locations across the Lower Colorado Desert study area, 19 of which were detected within Solar Energy Zone (SEZ) development boundaries, roughly evenly split between Riverside East and Imperial East, and 13 of which (both inside and outside SEZs) showed relatively high green vegetation index values over the period of 1985 to 2015 that would depend on non-precipitation water sources associated with active springs.

DRECP↗
NASA NTRS1993

Damper Spring For Omega Seal

Damper spring reduces deflections of omega-cross-section seal, reducing probability of failure and extending life of seal. Spring is split ring with U-shaped cross section. Placed inside omega seal and inserted with seal into seal cavity. As omega seal compressed into cavity, spring and seal make contact near convolution of seal, and spring becomes compressed also. During operation, when seal dynamically loaded, spring limits deflection of seal, reducing stress on seal.

Maclaughlin, Scott T.↗
NASA NTRS1947

Experimental Investigation of a Preloaded Spring-tab Flutter Model

An experimental investigation was made of a preloaded spring-tab flutter model to determine the effects on flutter speed of aspect ratio, tab frequency, and preloaded spring constant. The rudder was mass-balanced, and the flutter mode studied was essentially one of three degrees of freedom (fin bending coupled with rudder and tab oscillations). Inasmuch as the spring was preloaded, the tab-spring system was a nonlinear one. Frequency of the tab was the most significant parameter in this study, and an increase in flutter speed with increasing frequency is indicated. At a given frequency, the tab of high aspect ratio is shown to have a slightly lower flutter speed than the one of low aspect ratio. Because the frequency of the preloaded spring tab was found to vary radically with amplitude, the flutter speed decreased with increase in initial displacement of the tab.

VIBRATION AND FLUTTER - TABS↗
NASA NTRS1937

Valve-spring Surge

Test equipment is described that includes a system of three quartz indicators whereby three different pressures could be synchronized and simultaneously recorded on a single oscillogram. This equipment was used to test the reliction of waves at ends of valve spring, the dynamical stress of the valve spring for a single lift of the valve, and measurement of the curve of the cam tested. Other tests included simultaneous recording of the stress at both ends of the spring, spring oscillation during a single lift as a function of speed, computation of amplitude of oscillation for a single lift by harmonic analysis, effect of cam profile, the setting up of resonance, and forced spring oscillation with damping.

Marti, Willy↗
NASA NTRS2003

Physical Characteristics, Geologic Setting, and Possible Formation Processes of Spring Deposits on Mars Based on Terrestrial Analogs

Spring formation is a predicted consequence of the interaction of former Martian aquifers with structures common to Mars, including basin margins, Tharsis structures, and other structural deformation characteristics. The arid environment and high abundance of water soluble compounds in the crust will have likewise encouraged spring deposit formation at spring sites. Such spring deposits may be recognized from morphological criteria if the characteristics of formation and preservation are understood. An important first step in the current Mars exploration strategy [10] is the detection of sites where there is evidence for past or present near-surface water on Mars. This study evaluates the large-scale morphology of spring deposits and the physical processes of their formation, growth, and evolution in terms that relate to (1) their identification in image data, (2) their formation, evolution, and preservation in the environment of Mars, and (3) their potential as sites of long-term or late stage shallow groundwater emergence at the surface of Mars.

L S Crumpler↗
NASA NTRS2008

Sample Return from Ancient Hydrothermal Springs

Hydrothermal spring deposits on Mars would make excellent candidates for sample return. Molecular phylogeny suggests that that life on Earth may have arisen in hydrothermal settings [1-3], and on Mars, such settings not only would have supplied energy-rich waters in which martian life may have evolved [4-7] but also would have provided warm, liquid water to martian life forms as the climate became colder and drier [8]. Since silica, sulfates, and clays associated with hydrothermal settings are known to preserve geochemical and morphological remains of ancient terrestrial life [9-11], such settings on Mars might similarly preserve evidence of martian life. Finally, because formation of hydrothermal springs includes surface and subsurface processes, martian spring deposits would offer the potential to assess astrobiological potential and hydrological history in a variety of settings, including surface mineralized terraces, associated stream deposits, and subsurface environments where organic remains may have been well protected from oxidation. Previous attempts to identify martian spring deposits from orbit have been general or limited by resolution of available data [12-14]. However, new satellite imagery from HiRISE has a resolution of 28 cm/pixel, and based on these new data, we have interpreted several features in Vernal Crater, Arabia Terra as ancient hydrothermal springs [15, 16].

Allen, Carlton C.↗
NASA NTRS2003

Self-Deployable Spring-Strip Booms

Booms and other structures consisting mainly of thin spring strips are undergoing development. These structures are designed to be lightweight, to be compactly stowable, and to be capable of springing to stable configurations at full extension once released from stowage. Conceived for use as self-deploying structures in outer space, portable structures of this type may also be useful on Earth in applications in which there are requirements for light weight and small transportation volume. The elements common to these structures are spring strips with curved cross sections -- similar to spring strips of the type commonly used as compactly stowable carpenters' measuring tapes. These structures exploit the nonlinear mechanical properties of such tapes, namely (1) strong resistance to axial buckling while they are straight and (2) ease with which they can be wound into compact rolls once they have been initially bent. For a structure that contains multiple such strips, the net effect of the combined nonlinear characteristics is the following: (1) When at full extension, the structure is in a stable state, in which it is rigid and strong. (2) When stowed compactly, the structure is in a state that is semistable in the sense that only a small force is needed to restrain the structure against deployment. (3) The strain energy stored in the spring strips during compaction is sufficient to deploy the structure to full extension when the restraint is removed.

Fang, Houfei↗
NASA NTRS2014

Spring Hydrology Determines Summer Net Carbon Uptake in Northern Ecosystems

Increased photosynthetic activity and enhanced seasonal CO2 exchange of northern ecosystems have been observed from a variety of sources including satellite vegetation indices (such as the Normalized Difference Vegetation Index; NDVI) and atmospheric CO2 measurements. Most of these changes have been attributed to strong warming trends in the northern high latitudes (greater than or equal to 50N). Here we analyze the interannual variation of summer net carbon uptake derived from atmospheric CO2 measurements and satellite NDVI in relation to surface meteorology from regional observational records. We find that increases in spring precipitation and snow pack promote summer net carbon uptake of northern ecosystems independent of air temperature effects. However, satellite NDVI measurements still show an overall benefit of summer photosynthetic activity from regional warming and limited impact of spring precipitation. This discrepancy is attributed to a similar response of photosynthesis and respiration to warming and thus reduced sensitivity of net ecosystem carbon uptake to temperature. Further analysis of boreal tower eddy covariance CO2 flux measurements indicates that summer net carbon uptake is positively correlated with early growing-season surface soil moisture, which is also strongly affected by spring precipitation and snow pack based on analysis of satellite soil moisture retrievals. This is attributed to strong regulation of spring hydrology on soil respiration in relatively wet boreal and arctic ecosystems. These results document the important role of spring hydrology in determining summer net carbon uptake and contrast with prevailing assumptions of dominant cold temperature limitations to high-latitude ecosystems. Our results indicate potentially stronger coupling of boreal/arctic water and carbon cycles with continued regional warming trends.

Carbon Uptake↗
NASA NTRS2017

Isolators Including Main Spring Linear Guide Systems

Embodiments of isolators, such as three parameter isolators, including a main spring linear guide system are provided. In one embodiment, the isolator includes first and second opposing end portions, a main spring mechanically coupled between the first and second end portions, and a linear guide system extending from the first end portion, across the main spring, and toward the second end portion. The linear guide system expands and contracts in conjunction with deflection of the main spring along the working axis, while restricting displacement and rotation of the main spring along first and second axes orthogonal to the working axis.

Goold, Ryan↗
NASA NTRS2018

A Dual Spring Modeling Approach for Static and Fatigue Failure Assessments of Carbon/Epoxy Composite Sub-Elements

A dual spring model is developed for the static and fatigue damage predictions of laminates interface in composite structures. Stress concentrations can be induced by the defects formed in the fabrication or service process. A conventional S-N based fatigue damage model may not be accurate to predict the fatigue life of a structure with high stress concentration. With the dual spring model, static delamination failure can be simulated using springs of cohesive type material model while fatigue delamination development can be predicted using linear springs, where the crack driving force is computed based on virtual crack closure technique (VCCT). A Paris law type fatigue growth law with its mode mixity is applied for fatigue crack growth prediction. After verified using benchmark examples, including Double Cantilever Beam (DCB), End-Notched Flexure (ENF) and Mix-Mode Bending (MMB), the proposed dual spring model is applied in the static and fatigue damage prediction of NASA/Boeing sub-elements and UTC sub-elements.

Cui, Xiaodong↗
NASA NTRS1981

AgRISTARS: Supporting research. Spring small grains planting date distribution model

A model was developed using 996 planting dates at 51 LANDSAT segments for spring wheat and spring barley in Minnesota, Montana, North Dakota, and South Dakota in 1979. Daily maximum and minimum temperatures and precipitation were obtained from the cooperative weather stations nearest to each segment. The model uses a growing degree day summation modified for daily temperature range to estimate the beginning of planting and uses a soil surface wetness variable to estimate how a fixed number of planting days are distributed after planting begins. For 1979, the model predicts first, median, and last planting dates with root mean square errors of 7.91, 6.61, and 7.09 days, respectively. The model also provides three or four dates to represent periods of planting activity within the planting season. Although the full model was not tested on an independent data set, it may be suitable in areas other than the U.S. Great Plains where spring small grains are planted as soon as soil and air temperatures become warm enough in the spring for plant growth.

Hodges, T.↗
NASA NTRS1986

Leaf spring made of fiber-reinforced resin

A leaf spring made of a matrix reinforced by at least two types of reinforcing fibers with different Young's modulus is described in this Japanese patent. At least two layers of reinforcing fibers are formed by partially arranging the reinforcing fibers toward the direction of the thickness of the leaf spring. A mixture of different types of reinforced fibers is used at the area of boundary between the two layers of reinforced fibers. The ratio of blending of each type of reinforced fiber is frequently changed to eliminate the parts where discontinuous stress may be applied to the leaf spring. The objective of this invention is to prevent the rapid change in Young's modulus at the boundary area between each layer of reinforced fibers in the leaf spring.

Hori, J.↗
NASA NTRS1994

Spring- And Air-Suspension Mechanism For Testing Structures

Spring-and air-suspension mechanism supports weight of one end of test structure, yet allows that end to move almost completely unhindered as though it were weightless and not attached to suspension. Mechanisms of this type called "zero-spring-rate mechanisms" (ZSRM's) because they support structure in manner of spring suspension exhibiting approximately zero stiffness (zero spring rate) within some range of motion about nominal equilibrium or central support position. This suspension mechanism does not include overhead cables, which necessitate large amounts of overhead clearance and overhead support structures: suspension mechanism more compact (much smaller than structure) and supports structure from below.

Woodard, Stanley E.↗
NASA NTRS1998

Biomarkers in Carbonate Thermal Springs: Implications for Mars

Evidence of possible relict biogenic activity has been reported in carbonate inclusions within martian meteorite ALH 84001. The initial evidence included ovoid and elongated forms 50 - 500 nanometers in length, morphologically similar to but significantly smaller than many terrestrial microbes. More recently, thin structures resembling the remains of organic biofilms have been reported in the same meteorite. Carbonates have also been discussed in the context of Mars sample return missions. Thermal spring deposits have often been cited as prime locations for exobiological exploration. By analogy to Earth, specialized microbes may have existed in the heated, mineralized waters, and precipitates of carbonate and/or silica from these waters may have trapped and preserved evidence of life. Since the geological interactions that produce thermal springs can be recognized in orbital imagery, directed searches for microfossils in such deposits are deemed possible. We are engaged in a study of the signatures produced by contemporary biogenic activity (biomarkers) in carbonate thermal springs. We are examining the microbes that live in such environments and the preservation of microbial forms, biofilms, and petrographic fabrics indicative of life in thermal spring mineral deposits. This work is part of a much more extensive study to refine the appropriate tools, techniques, and approaches to seek evidence of life in a range of planetary samples. A deeper understanding of biological signatures will prepare us for the detailed search for life on Mars and eventually on other planets. Overall. the study of biomarkers in rocks and soils will provide insight into the evolution of life because such signatures are a record of how life interacts with its environment, how it adapts to changing conditions, and how life can influence geology and climate.

Allen, C. C.↗
NASA NTRS1995

Diverse Thermus species inhabit a single hot spring microbial mat

Through an effort to characterize aerobic chemoorganotrophic bacteria in the Octopus Spring cyano-bacterial mat community, we cultivated four Thermus isolates with unique 16S rRNA sequences. Isolates clustered within existing Thermus clades, including those containing Thermus ruber, Thermus aquaticus, and a subgroup closely related to T. aquaticus. One Octopus Spring isolate is nearly identical (99.9% similar) to isolates from Iceland, and two others are closely related to a T. ruber isolated from Russia. Octopus Spring isolates similar to T. aquaticus and T. ruber exhibited optimal growth rates at high (65-70 degrees C) and low (50 degrees C) temperatures, respectively, with the most abundant species best adapted to the temperature of the habitat (50-55 degrees C). Our results display a diversity of Thermus genotypes defined by 16S rRNA within one hot spring microbial community. We suggest that specialization to temperature and perhaps other local environmental features controls the abundance of Thermus populations.

Non-NASA Center↗
NASA NTRS2004

Evaluation of High Temperature Knitted Spring Tubes for Structural Seal Applications

Control surface seals are crucial to current and future space vehicles, as they are used to seal the gaps surrounding body flaps, elevons, and other actuated exterior surfaces. During reentry, leakage of high temperature gases through these gaps could damage underlying lower temperature structures such as rudder drive motors and mechanical actuators, resulting in impaired vehicle control. To be effective, control surface seals must shield lower temperature structures from heat transfer by maintaining sufficient resiliency to remain in contact with opposing sealing surfaces through multiple compression cycles. The current seal exhibits significant loss of resiliency after a few compression cycles at elevated temperatures (i.e., 1900 F) and therefore would be inadequate for advanced space vehicles. This seal utilizes a knitted Inconel X-750 spring tube as its primary resilient element. As part of a larger effort to enhance seal resiliency, researchers at the NASA Glenn Research Center performed high temperature compression testing (up to 2000 F) on candidate spring tube designs employing material substitutions and modified geometries. These tests demonstrated significant improvements in spring tube resiliency (5.5x better at 1750 F) through direct substitution of heat treated Rene 41 alloy in the baseline knit design. The impact of geometry modification was minor within the range of parameters tested, however trends did suggest that moderate resiliency improvements could be obtained by optimizing the current spring tube geometry.

Taylor, Shawn C.↗
NASA NTRS2006

Further Investigations of High Temperature Knitted Spring Tubes for Advanced Control Surface Seal Applications

Knitted metallic spring tubes are the structural backbones that provide resiliency in control surface seals for use on current and future reusable space launch vehicles. Control surface seals fill the space between movable control surfaces such as body flaps, rudders and elevons, and the static body structures to which they are attached. These seals must remain in continuous contact with opposing surfaces to prevent the ingestion of damaging hot gases encountered during atmospheric re-entry. The Inconel X-750 (Special Metals Corporation) spring tube utilized in the baseline control surface seal shows significant resiliency loss when compressed at temperatures as low as 1200 F. High temperature compression testing and microstructural analysis show that creep is the dominant deformation mechanism leading to permanent set and resiliency loss in tested spring tube samples. Additional evaluation using a structured design of experiments approach shows that spring tube performance, primarily high temperature resiliency, can be enhanced through material substitution of Rene 41 (Allvac) alloy (for the baseline Inconel X-750 material) when coupled with specialized thermal processing.

Taylor, Shawn C.↗