Search NASA⌕ Search

SEARCH · Search NASA

Results for “electromagnetic processes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS2026

Application of Energy-efficient Electromagnetic Melt-Processing for the Upcycling of Recycled Polyphenylene Sulfide into Multifunctional Segregated Nanocomposites

Polyphenylene sulfide (PPS) is widely used in structural and functional composites because of its thermal stability, chemical resistance, and mechanical strength. As circular manufacturing becomes increasingly important, extending the service life of recycled PPS (rPPS) is essential. However, conventional high-temperature reprocessing accelerates thermo-oxidative degradation, reducing recycled composite performance. This study proposes a rapid and potentially energy-saving upcycling strategy for rPPS using electromagnetic (EM) melt-processing to form segregated carbon nanotube (CNT) networks and produce EM-responsive nanocomposites. The aim was to determine whether CNT-assisted EM heating could reduce polymer degradation while improving multifunctional properties at ultralow filler loadings. rPPS micropellets were coated with CNTs by ball milling to create conductive shells, then compacted into green bodies (GBs) and selectively melted by rapid EM irradiation. Structural, electrical, mechanical, rheological, and electromagnetic interference (EMI) shielding properties were evaluated. Electrical percolation occurred at an ultralow CNT loading of 0.08 wt%, with conductivity reaching (1.24 ± 0.74) × 10 -5 S⋅m -1 at 0.1 wt%. At this concentration, tensile strength and modulus increased by 72% and 99%, respectively. At ~ 0.7 mm thickness, X-band EMI shielding effectiveness reached 6 dB for GBs and 3 dB after EM processing. This shows that EM melt-processing upcycles rPPS into high-performance multifunctional nanocomposites with minimum thermal degradation.

recycled↗
NASA NTRS1995

Nial and Nial-Based Composites Directionally Solidified by a Containerless Zone Process

A containerless electromagnetically levitated zone (CELZ) process has been used to directionally solidify NiAl and NiAl-based composites. The CELZ processing results in single crystal NiAl (HP-NiAl) having higher purity than commercially pure NiAl grown by a modified Bridgman process (CP-NiAl). The mechanical properties, specifically fracture toughness and creep strength, of the HP-NiAl are superior to binary CP-NiAl and are used as a base-line for comparison with the composite materials subsequently studied. Two-phase composite materials (NiAl-based eutectic alloys) show improvement in room temperature fracture toughness and 1200 to 1400 K creep strength over that of binary HP-NiAl. Metallic phase reinforcements produce the greatest improvement in fracture toughness, while intermetallic reinforcement produces the largest improvement in high temperature strength. Three-phase eutectic alloys and composite materials were identified and directionally solidified with the intent to combine the improvements observed in the two-phase alloys into one alloy. The room temperature fracture toughness and high temperature strength (in air) serve as the basis for comparison between all of the alloys. Finally, the composite materials are discussed in terms of dominant fracture mechanism observed by fractography.

Joslin, Steven M.↗
NASA NTRS1994

Stopping powers and cross sections due to two-photon processes in relativistic nucleus-nucleus collisions

The effects of electromagnetic-production processes due to two-photon exchange in nucleus-nucleus collisions are discussed. Feynman diagrams for two-photon exchange are evaluated using quantum electrodynamics. The total cross section and stopping power for projectile and target nuclei of identical charge are found to be significant for heavy nuclei above a few GeV per nucleon-incident energy.

Cheung, Wang K.↗
NASA NTRS1991

Analysis of electromagnetic interference from power system processing and transmission components for Space Station Freedom

The goal is to analyze the potential effects of electromagnetic interference (EMI) originating from power system processing and transmission components for Space Station Freedom.The approach consists of four steps: (1) develop analytical tools (models and computer programs); (2) conduct parameterization studies; (3) predict the global space station EMI environment; and (4) provide a basis for modification of EMI standards.

Barber, Peter W.↗
NASA NTRS1992

Analysis of electromagnetic interference from power system processing and transmission components for Space Station Freedom

The goal of this research project was to analyze the potential effects of electromagnetic interference (EMI) originating from power system processing and transmission components for Space Station Freedom. The approach consists of four steps: (1) developing analytical tools (models and computer programs); (2) conducting parameterization (what if?) studies; (3) predicting the global space station EMI environment; and (4) providing a basis for modification of EMI standards.

Barber, Peter W.↗
NASA NTRS1997

STS-83 Mission Highlights Resources Tape

The STS-83 mission flight crew, Cmdr. James D. Halsell Jr., Pilot Susan L. Still, Payload Cmdr. Janice E. Voss, Mission Specialists Michael L. Gernhardt and Donald A. Thomas, and Payload Specialist Gregory T. Linteris and Roger K. Crouch present an overview of their mission. The primary payload is the Microgravity Science Laboratory (MSL), which is a collection of microgravity experiments housed inside a European Spacelab Long Module (LM). MSL features 19 materials science investigations in 4 major facilities. These facilities are the Large Isothermal Furnace, the EXpedite the PRocessing of Experiments to the Space Station (EXPRESS) Rack, the Electromagnetic Containerless Processing Facility (TEMPUS), and the Coarsening in Solid-Liquid Mixtures (CSLM) Facility, the Droplet Combustion Experiment (DCE); and the Combustion Module-1 Facility. Additional technology experiments will be performed in the Middeck Glovebox (MGBX) developed by the Marshall Space Flight Center (MSFC) and the High-Packed Digital Television (HI-PAC DTV) system will be used to provide multi-channel real-time analog science video. Pre-flight, launch, and orbital footage is followed a discussion of the spaceborne experiments aboard the MSL. The end footage shows the shuttle's prelanding checkout, reentry, and landing.

Source record↗
NASA NTRS1995

Magnetic Annual Arc (MAARC)

Electromagnetic propulsion systems offer high specific impulses (greater than 1500) and high thrust-density as compared to conventional chemical rocket propulsion system. Understanding and simulating the physical processes in electromagnetic propulsion devices (as well as testing with refined diagnostic equipment) hold the key to improved performance and longevity of these devices. This in turn is an essential requirement for a practical application in future space endevors.

Thomas, Herbert↗
NASA NTRS2020

Cathode & Electromagnet Qualification Status and Power Processing Unit Development Update for the Ascendant Sub-kW Transcelestial Electric Propulsion System

A review of the component-level flight qualification efforts and power processing unit development status of the Ascendant Sub-kW Transcelestial Electric Propulsion System (ASTRAEUS) program is presented. Component-level qualification efforts were undertaken for the system’s ultra-compact heaterless LaB6 hollow cathode and electromagnets, both of which employ designs bespoke to ASTRAEUS, as they represent the highest failure risks for the thruster. Through parallel long-duration wear and ignition tests, the ASTRAEUS cathode demonstrated invariant discharge performance over more than 5000 h of operation at its maximum operating current of 4 A and demonstrated more than 25,000 ignition cycles. The ASTRAEUS electromagnets completed their environmental qualification through a demonstration of more than 1200 deep thermal cycles with no indication of coil degradation (the test articles previously completed qualification-level vibration and shock testing). ASTRAEUS’s prototype power processing unit has demonstrated more than 92% total power conversion efficiency and class-leading power density & specific power density of 4.5 W/cm3 & 1670 W/kg, respectively. The various power converters found in the ASTRAEUS power processing unit are reviewed with a focus on the methods by which such high performance was achieved.

Conversano, Ryan W.↗
NASA NTRS1990

Re-forming supercritical quasi-parallel shocks. II - Mechanism for wave generation and front re-formation

This paper continues the study of Thomas et al. (1990) in which hybrid simulations of quasi-parallel shocks were performed in one and two spatial dimensions. To identify the wave generation processes, the electromagnetic structure of the shock is examined by performing a number of one-dimensional hybrid simulations of quasi-parallel shocks for various upstream conditions. In addition, numerical experiments were carried out in which the backstreaming ions were removed from calculations to show their fundamental importance in reformation process. The calculations show that the waves are excited before ions can propagate far enough upstream to generate resonant modes. At some later times, the waves are regenerated at the leading edge of the interface, with properties like those of their initial interactions.

Winske, D.↗
NASA NTRS1988

Containerless science for materials processing

Containerless materials processing in space to restrict specimen deformation from hydrostatic pressure of contact with the container is discussed. Several containerless science studies are reviewed, including the study of drop dynamics, nucleation studies, metastable solid phases experiments, glass research, biological materials research, and protein crystal growth. The development of technologies for materials research in space are examined, including acoustic containerless systems, and electrostatic and electromagnetic containerless processing.

Wang, T. G.↗
NASA NTRS1991

Making High-Pass Filters For Submillimeter Waves

Micromachining-and-electroforming process makes rigid metal meshes with cells ranging in size from 0.002 in. to 0.05 in. square. Series of steps involving cutting, grinding, vapor deposition, and electroforming creates self-supporting, electrically thick mesh. Width of holes typically 1.2 times cutoff wavelength of dominant waveguide mode in hole. To obtain sharp frequency-cutoff characteristic, thickness of mesh made greater than one-half of guide wavelength of mode in hole. Meshes used as high-pass filters (dichroic plates) for submillimeter electromagnetic waves. Process not limited to square silicon wafers. Round wafers also used, with slightly more complication in grinding periphery. Grid in any pattern produced in electroforming mandrel. Any platable metal or alloy used for mesh.

Siegel, Peter H.↗
NASA NTRS1974

AAFE man-made noise experiment project. Volume 2: Project and experiment discussions

An experiment for the acquisition and processing of man-made noise interference data on earth orbital altitudes is discussed. The objectives of the project are to confirm the results of analytical studies concerning radio frequency man-made noise in space. It is stated that the measurements of the amounts and types of noise in frequency bands of interest could allow the allocation and utilization of frequencies to be optimized and would also contribute to the engineering objective of optimizing flight receiving systems. A second objective of the project was to design and fabricate a noise measuring receiver which would demonstrate the feasibility of the experiment design under the project. The procedures for acquiring and processing the electromagnetic radiation data are discussed.

Source record↗
NASA NTRS1984

Wet model of Saturn's ionosphere: Water from the rings

Current theoretical models of Saturn's ionosphere are difficult to reconcile with the ionospheric electron density profiles obtained from the Pioneer and Voyager radio occultation observations and the large diurnal variation of maximum ionospheric electron density deduced from studies of Saturn lightning discharges. A model of Saturn's ionosphere is proposed in which water plays a major role as a minor constituent present by virtue of downward diffusion from an external source. This model of the Saturn ionosphere is a classical 'F2' type layer resulting from the photodissociative production of H(+) from H2 and rapid chemical loss due to a series of charge exchange reactions with water. A planet-wide influx of about 4x10 to the 7th power molecules/sec/sq cm of water from the rings is consistent with the observed ionospheric electron densities and estimates of influx due to micrometeoride bombardment of the rings. An enhanced influx of water occurs at latitudes (-38 deg, +44 deg) magnetically connected to the inner edge of Saturn's B ring which results from an electromagnetic erosion process contributing substantially to the (local) upper atmosphere water content. Present day influx at these latitudes is possibly as large as 2x10 to the 9th power molecules/sec/sq cm.

Connerney, J. E. P.↗
NASA NTRS1985

On magnetic pair production above fast pulsar polar caps

Magnetic pair production is one of high-energy electromagnetic conversion processes important to the development of pair-photon cascades in pulsars. On the basis of current polar cap models, the properties of magnetic pair production in fast pulsars are discussed. Suppose there is a roughly dipole magnetic field at the stellar surface, the author estimate the effects on non-zero curvature of magnetic field lines upon curvature radiation from primary particles and pair production rate near the surface of pulsars.

An, S.↗
NASA NTRS1984

New model of Saturn's ionosphere with an influx of water from the rings

A radically different model of Saturn's ionosphere is proposed in which water plays a major role as a minor constituent present by downward diffusion from an external source. The model ionosphere is a classical F2 type layer resulting from the photodissociative production of H(+) from H2 and rapid chemical loss by a series of charge exchange reactions with water. A planet-wide influx of about 4 x 10 to the 7th molecules/sq cm/s of water from the rings is consistent with the observed ionospheric electron densities. An enhanced influx of water occurs at latitudes (-38, +44 deg) connected magnetically at the inner edge of Saturn's B ring, where an electromagnetic erosion process takes place. The present-day influx at these latitudes may be as large as 2 x 10 to the 9th molecules/sq cm/s.

Connerney, J. E. P.↗
NASA NTRS1985

Modification of the Electromagnetic Levitator (EML) Hardware

The goals of this project are: (1) to study the upgrade requirements and approaches needed for incorporation of an Electromagnetic Levitator (EML) into the shuttle orbiter, (2) to work with members of the Electromagnetic Containerless Processing science working group (SWG) to define future experiments for the EML, and (3) to assist these investigators in further development of ground-based experiment techniques to the limits possible in the terrestrial gravitational environment. Present work is directed toward: (1) upgrading the EML flight apparatus to meet requirements of safety and integration interfaces with the MSL orbiter carrier, (2) development of new experiment components required to carry out approved experiments in undercooled solidification and associated fluid flow studies directed by MIT, and (3) construction, test, qualification and integration assistance for the EML MSL flight package.

Frost, R. T.↗