Search NASA⌕ Search

SEARCH · Search NASA

Results for “supercapacitor energy storage”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

An energy storage dispatch optimization for demand-side management in industrial facilities

An energy storage (ES) dispatch optimization was implemented to test lithium-ion battery ES, supercapacitor ES, and compressed air ES on two different industrial facilities – one intermittent process facility and one continuous process facility. The model first shows the capability of optimizing the size of a single technology on a single industrial facility to maximize the return on investment. Then, for the same profile, the model identifies significant differences in the optimal size for different technologies based on their performance parameters. Third, the model identifies differences in the optimal size for each technology based on the facilities profile. Here the results show compressed air ES yields the highest return on investment for both facilities and provides insight for future development of ES systems.

25 ENERGY STORAGE↗
DOE OSTI2021

Graphitized Biocarbon Derived from Hydrothermally Liquefied Low-Ash Corn Stover

Graphitized biocarbon can be utilized for energy storage applications such as supercapacitors. The scientific community have geared their attention to obtain such value-added product from abundantly available and low-cost biomass feedstock agricultural residues such as corn stover. Lignocellulosic components embedded within the cell wall of biomass substrates can provide a fine template for enhanced ion storage, transport, and rate capabilities, desirable for electrochemical storage. Presented is the utilization of homogenized low ash content corn stover milled and sieved to desired specifications, which underwent hydrothermal liquefaction in the presence of Ni-based catalytic salts at 275 o C. The hydrochar obtained by solid residue extracted from the reaction slurry was washed to acid neutral and subjected to catalytic activation using ZnCl 2 , followed by thermal annealing at 400 o C for morphological and pore size enhancement of the resulting biochar. Carbonization was performed on acid neutralized hydrochar at 850 °C to further enhance pore structures and increase graphitization for improved conductivity. Catalytic materials exhibited a specific capacitance of 316 F g -1 and held a 100% retention beyond 10,000 cycles. BET, Raman, XRD, cyclic voltammetry, chronopotentiometry, and EIS are discussed herein.

Biomass↗
DOE OSTI2023

Energy management systems for forecasted demand error compensation using hybrid energy storage system in nanogrid

This paper proposes an energy management system (EMS) for nanogrids to balance the power supply and forecasted demand in consideration of forecasting errors arising from high instantaneous demand. The proposed EMS employs a power-balancing optimization process for forecasted demand and a reference power modulation strategy for forecasting errors. This power-balancing optimization utilizes nanogrid sources, such as photovoltaics, fuel cells, and batteries, to meet forecasted demand and a supercapacitor charging process to overcome issues with a low energy density. The proposed reference power modulation strategy is utilized to allocate power from a hybrid energy storage system consisting of a battery and supercapacitor in order to compensate for forecasting errors. In addition, this proposed strategy considers battery and supercapacitor constraints such as the power changing rate and total power limitations. Further, the power-balancing optimization process also operates at faster sampling rate than the reference power modulation process in order to improve the computational efficiency. The performance of the proposed EMS is evaluated using real data obtained from the Korea Electric Power Exchange.

25 ENERGY STORAGE↗
DOE OSTI2022

In situ anodic electrodeposition of two-dimensional conductive metal-organic framework@nickel foam for high-performance flexible supercapacitor

Owing to their large specific surface area and well-defined porosity, metal-organic frameworks (MOFs) have long been considered as promising materials for energy storage. Unfortunately, their straightforward utilization in supercapacitors was hindered for years due to poor conductivity until the emergence of 2D conductive MOF materials. To date, several 2D conductive MOF-based supercapacitors have been reported. Nevertheless, almost all these supercapacitors were fabricated from MOF powders through a slurry coating method or dense packing method, which negatively affected their capacitor performance. Herein, we have developed an anodic electrodeposition (AED) approach to fabricate a uniformly deposited 2D conducting MOF on nickel foam and use it directly as electrodes for supercapacitors without any additives. Finally, the superior performance of the 2D conducting MOF on nickel foam in both aqueous and organic electrolytes was then disclosed by a series of electrochemical measurements, demonstrating the significant advantages of the AED approach over traditional methods.

2D conductive metal-organic frameworks↗
DOE OSTI2022

Surface engineering of MXenes for energy and environmental applications

We report MXenes, a new family of two-dimensional (2D) transition-metal carbides, nitrides, and carbonitrides, have received considerable attention in energy and environmental applications due to their intriguing electronic, electrochemical, optical, and chemical properties. Applications of MXenes have been witnessed in photocatalysis, electrocatalysis, thermocatalysis, sensing and biosensing, electrochemical energy storage, energy conversion and storage, rechargeable batteries, supercapacitors, and biomedicine. Notably, the tunable surface chemistry of MXenes plays an important role in their success in those applications. The surface composition of MXenes is considered to have a significant influence on their physicochemical properties and functionalities. In order to achieve a comprehensive understanding and rational design of MXenes by surface engineering, in this review, we highlight the application of several kinds of surface engineering approaches for MXenes, including tuning the surface termination groups, surface functionalization, surface defects, surface doping, surface oxidation, and the theoretical simulation of surface engineering of MXenes. Moreover, the relationship between the surface engineering and the physicochemical properties of MXenes is discussed. Finally, the ongoing challenges and opportunities for the future development of MXene surface engineering are also highlighted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Machine learning the electric field response of condensed phase systems using perturbed neural network potentials

Abstract The interaction of condensed phase systems with external electric fields is of major importance in a myriad of processes in nature and technology, ranging from the field-directed motion of cells (galvanotaxis), to geochemistry and the formation of ice phases on planets, to field-directed chemical catalysis and energy storage and conversion systems including supercapacitors, batteries and solar cells. Molecular simulation in the presence of electric fields would give important atomistic insight into these processes but applications of the most accurate methods such as ab-initio molecular dynamics (AIMD) are limited in scope by their computational expense. Here we introduce Perturbed Neural Network Potential Molecular Dynamics (PNNP MD) to push back the accessible time and length scales of such simulations. We demonstrate that important dielectric properties of liquid water including the field-induced relaxation dynamics, the dielectric constant and the field-dependent IR spectrum can be machine learned up to surprisingly high field strengths of about 0.2 V Å −1 without loss in accuracy when compared to ab-initio molecular dynamics. This is remarkable because, in contrast to most previous approaches, the two neural networks on which PNNP MD is based are exclusively trained on molecular configurations sampled from zero-field MD simulations, demonstrating that the networks not only interpolate but also reliably extrapolate the field response. PNNP MD is based on rigorous theory yet it is simple, general, modular, and systematically improvable allowing us to obtain atomistic insight into the interaction of a wide range of condensed phase systems with external electric fields.

Science & Technology - Other Topics↗
DOE OSTI2024

Silica–Derived Nanostructured Electrode Materials for ORR, OER, HER, CO 2 RR Electrocatalysis, and Energy Storage Applications: A Review**

Silica-derived nanostructured catalysts (SDNCs) are a class of materials synthesized using nanocasting and templating techniques, which involve the sacrificial removal of a silica template to generate highly porous nanostructured materials. The surface of these nanostructures is functionalized with a variety of electrocatalytically active metal and non-metal atoms. SDNCs have attracted considerable attention due to their unique physicochemical properties, tunable electronic configuration, and microstructure. These properties make them highly efficient catalysts and promising electrode materials for next generation electrocatalysis, energy conversion, and energy storage technologies. The continued development of SDNCs is likely to lead to new and improved electrocatalysts and electrode materials. This review article provides a comprehensive overview of the recent advances in the development of SDNCs for electrocatalysis and energy storage applications. It analyzes 337,061 research articles published in the Web of Science (WoS) database up to December 2022 using the keywords “silica”, “electrocatalysts”, “ORR”, “OER”, “HER”, “HOR”, “CO 2 RR”, “batteries”, and “supercapacitors”. The review discusses the application of SDNCs for oxygen reduction reaction (ORR), oxygen evolution reaction (OER), hydrogen evolution reaction (HER), carbon dioxide reduction reaction (CO 2 RR), supercapacitors, lithium-ion batteries, and thermal energy storage applications. It concludes by discussing the advantages and limitations of SDNCs for energy applications.

25 ENERGY STORAGE↗
DOE OSTI2023

Vanadium and Niobium MXenes—Bilayered V 2 O 5 Asymmetric Supercapacitors

MXenes offer high metallic conductivity and redox capacitance that are attractive for high-power, high-energy storage devices. However, they operate limitedly under high anodic potentials due to irreversible oxidation. Pairing them with oxides to design asymmetric supercapacitors may expand the voltage window and increase the energy storage capabilities. Hydrated lithium preintercalated bilayered V 2 O 5 ( δ-Li x V 2 O 5 ·nH 2 O) is attractive for aqueous energy storage due to its high Li capacity at high potentials; however, its poor cyclability remains a challenge. To overcome its limitations and achieve a wide voltage window and excellent cyclability, it is combined with V 2 C and Nb 4 C 3 MXenes. Asymmetric supercapacitors employing lithium intercalated V 2 C (Li-V 2 C) or tetramethylammonium intercalated Nb 4 C 3 (TMA-Nb 4 C 3 ) MXenes as the negative electrode, and a δ-Li x V 2 O 5 ·nH 2 O composite with carbon nanotubes as the positive electrode in 5 m LiCl electrolyte operate over wide voltage windows of 2 and 1.6 V, respectively. The latter shows remarkably high cyclability—capacitance retention of ≈95% after 10 000 cycles. Here, this work highlights the importance of selecting appropriate MXenes to achieve a wide voltage window and a long cycle life in combination with oxide anodes to demonstrate the potential of MXenes beyond Ti 3 C 2 in energy storage.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Complex polycation redox material interfaced with renewable porous carbon for asymmetric supercapacitors

Mixed polycation transition metal ferrites are known to exhibit unique and superior characteristics for structural, electrical, magnetic, and optical applications. Although a few binary transition metal ferrites are found to be suitable for electrochemical energy storage application, ternary transition metal ferrites are not investigated for asymmetric supercapacitors (ASCs). Mixed polycation oxides are expected to have increased active sites that can facilitate proton and electron transfer impacting the redox reactions. Specific crystal structure and associated lattice parameters as well as surface and morphological characteristics can also influence the energy storage properties. This study for the first time reports a novel complex polycation redox material, (Cu p Mn q Zn r ) x Fe y O z and renewable pinewood (PW) derived porous carbon (POC) as electrodes for ASC. Both (Cu p Mn q Zn r ) x Fe y O z and PW-POC are subjected to electrochemical characterization and used in ASC configuration with aqueous KOH electrolyte. It is anticipated that the Faradaic characteristics of (Cu p Mn q Zn r ) x Fe y O z will make it to serve as a cathode while PW-POC with capacitive behavior will act as anode in ASCs. Relatively higher specific capacitance of > 200 F/g is observed for the (Cu p Mn q Zn r ) x Fe y O z reference electrode and fabricated ASCs. Capacitance retention rate is tested in 10,000 cycles for the working electrodes whereas for ASC, the stability tests are performed over 100 charging-discharging cycles exhibiting relatively higher capacitance retention. (Cu p Mn q Zn r ) x Fe y O z appears to be a promising material for a supercapacitor.

(CupMnqZnr)xFeyOz↗
DOE OSTI2022

Pseudocapacitive Charge Storage in Electrochromic Transition-Metal Oxide Thin Films

Electrochromic pseudocapacitive transition-metal oxide materials, such as tungsten oxide, which combine fast response, high energy density, and optical effects, can play a significant role as energy storage materials. Here we investigate the electrochemical kinetics of thin films of tungsten oxide, which turn transparent to sky-blue color in the lithiated state due to the reduction of W 6+ to W 5+ . In this study, we investigated the charge density, charge transfer, ion diffusion, and interfacial behavior upon Li + insertion/de-insertion in WO 3 . The electrochromic thin film's pseudocapacitive and electrical double layer mechanism was differentiated based on the power-law. Faradaic diffusion-controlled process dominates over the surface capacitive behavior at scan rates below 40 mV s –1 . These films exhibit an areal charge density of around 100 mC cm –2 and a capacitance of 80 mF cm –2 , superior to most comparable electrochromic materials and supercapacitors. This work combines electrochromics and energy storage properties and provides a fundamental understanding of pseudocapacitive and electrochromic mechanisms in WO 3 .

25 ENERGY STORAGE↗
DOE OSTI2024

EchemFEM: A Firedrake-based Python package for electrochemical transport

The transition from fossil fuels to renewable energy has brought about a rapid increase in the availability of clean electricity. However, electricity generated from sources such as wind and solar are limited to intermittent operation due to daily and seasonal variation. One solution is to utilize electrochemical devices in energy storage and electrochemical manufacturing applications, where they can harness surplus energy and decarbonize chemical industries traditionally reliant on petrochemical feedstocks. Managing the growing prevalence of renewable energy underscores the importance of developing and scaling up these technologies, which can in turn facilitate the achievement of carbon emission reduction commitments of companies and developed economies. Likewise, the electrification of transport creates an increasing need for energy-dense electrochemical energy storage devices such as batteries and supercapacitors. Naturally, simulation tools are required to assist in the design of efficient and industrial-scale electrochemical devices.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2024

Assessing Nonlinear Polarization in Electrochemical Cells using AC Impedance Spectroscopy

AC impedance spectroscopy is widely used to evaluate performance limitations in energy storage and conversion devices (e.g., batteries, supercapacitors, and fuel cells). This work shows that integrating the resistive elements in an equivalent circuit as functions of steady-state current enables one to recover overpotentials associated with different processes (e.g., ion migration, charge transfer, and diffusion) in nonlinear electrochemical power supplies. Closed form expressions for diffusion overpotentials are derived using this method for transmissive and reflective boundary conditions and three electrode symmetries (planar, cylindrical, and spherical). Discussion is also extended to macroscopically homogenous porous electrodes which are relevant for most real-world devices. Overall, the approach described herein is a powerful tool to identify rate-limiting steps and guide material/component design.

25 ENERGY STORAGE↗
DOE OSTI2020

Carbon Nanotubes: Applications to Energy Storage Devices

Carbon nanotubes (CNTs) are an extraordinary discovery in the area of science and technology. Engineering them properly holds the promise of opening new avenues for future development of many other materials for diverse applications. Carbon nanotubes have open structure and enriched chirality, which enable improvements the properties and performances of other materials when CNTs are incorporated in them. Energy storage systems have been using carbon nanotubes either as an additive to improve electronic conductivity of cathode materials or as an active anode component depending upon structural and morphological specifications. Furthermore, they have also been used directly as the electrode material in supercapacitors and fuel cells. Therefore, CNTs demand a huge importance due to their underlying properties and prospective applications in the energy storage research fields. There are different kinds of carbon nanotubes which have been successfully used in batteries, supercapacitors, fuel cells and other energy storage systems. This chapter focuses on the role of CNTs in the different energy storage and conversion systems and impact of their structure and morphology on the electrochemical performances and storage mechanisms.

Amin, Ruhul↗
DOE OSTI2025

Subvoxel Control of Fiber Orientation via Multidirectional Shearing in 3D Printing

Anisotropy, the characteristic of materials exhibiting different properties based on their direction, is widespread in nature. Conventional manufacturing techniques often fall short in recreating such complex anisotropy. While 3D printing allows for precise fiber deposition in anisotropic composites, previous studies have only achieved bulk reorientation of fibers at the voxel level in two dimensions. This limits the replication of localized 3D anisotropies found in natural materials. To address this, a novel 3D printing technique is presented that enables subvoxel control of fiber orientation in all three directions using multidirectional shearing via nozzle rotation and inclination. The fiber orientation control in these experimental tests is driven by a numerical model, enabling a fully digital approach to program microstructures within a strand. This programmability is demonstrated through mechanical and thermal tests, illustrating a localized and controllable response to external stimuli. Achieving such complex anisotropy holds potential across several fields, including wearables and biomedical implants, lightweight composite structures, and energy storage technologies such as batteries and supercapacitors.

3D printing↗
DOE OSTI2021

A review of energy storage technologies for demand-side management in industrial facilities

Demand-side management (DSM) in industrial facilities provides an opportunity for substantial amounts of energy cost savings, since industrial facilities are the largest energy consuming sectors globally. In this work, energy storage (ES) technologies are critically reviewed and compared with industrial DSM in mind. ES technologies reviewed herein include lithium-ion battery energy storage (BES), sodium-sulfur BES, lead-acid BES, flow BES, supercapacitor ES, superconducting magnetic ES, thermal ES, flywheel ES, pumped hydro ES, and compressed air ES. The fundamentals of these energy storage technologies are reviewed in detail including recent developments, followed by case studies and extensive comparisons. These comparisons include, but are not limited to cost per cycle analyses, levelized cost of energy analyses, and comparisons between performance, transient, and cost characteristics. Here, some key properties analyzed include the rated power, power density, efficiency, lifetime, discharge time, capital costs, and O&M costs.

25 ENERGY STORAGE↗
DOE OSTI2020

Stretchable electrochemical energy storage devices

The increasingly intimate contact between electronics and the human body necessitates the development of stretchable energy storage devices that can conform and adapt to the skin. Therefore, the development of stretchable batteries and supercapacitors has received significant attention in recent years. This review provides an overview of the general operating principles of batteries and supercapacitors and the requirements to make these devices stretchable. The following sections provide an in-depth analysis of different strategies to convert the conventionally rigid electrochemical energy storage materials into stretchable form factors. Namely, the strategies of strain engineering, rigid island geometry, fiber-like geometry, and intrinsic stretchability are discussed. A wide range of materials are covered for each strategy, including polymers, metals, and ceramics. By comparing the achieved electrochemical performance and strain capability of these different materials strategies, we allow for a side-by-side comparison of the most promising strategies for enabling stretchable electrochemical energy storage. The final section consists of an outlook for future developments and challenges for stretchable supercapacitors and batteries.

25 ENERGY STORAGE↗
DOE OSTI2024

Insights into activators on biomass-derived carbon-based composites for electrochemical energy storage

Biomass-derived carbon materials are now an essential source of carbon electrodes for high-performance supercapacitors due to their cost-effectiveness and abundant heteroatom self-doping properties. When preparing porous carbon materials from biomass for supercapacitor use, the use of activators can significantly increase the specific surface area of carbon materials, enhance pore structures, introduce more heteroatoms, promote the generation of various functional groups, and play a crucial role in the capacitance performance of biomass-derived carbon materials. However, the role of activators during the activation process has been overlooked in previous work focused on improving supercapacitor capacitance performance. In addition, there is a lack of comprehensive reviews summarizing the role of activators. Therefore, this work classifies the types of activators, discusses their activation mechanisms, operability, economy, and environmental friendliness, and proposes future development directions for activators. The main mixing methods of activators and carbon materials are also demonstrated, highlighting the advantages and disadvantages of each method. In conclusion, this work could provide valuable insights for the development of activators for high-performance supercapacitors.

25 ENERGY STORAGE↗
DOE OSTI2020

Nature of Terminating Hydroxyl Groups and Intercalating Water in Ti 3 C 2 T x MXenes: A Study by 1 H Solid-State NMR and DFT Calculations

Since the discovery of two-dimensional transition metal carbides, referred to as MXenes, research efforts targeted their applications in energy storage, as lithium-ion batteries and supercapacitors. This interest is attributable to MXenes’ large volumetric capacitance, high rate handling capability and stable cycling performance, which largely rely on surface chemistry provided by the terminating groups, such as -OH, -O, and -F. However, the atomic-scale characterization of these surface terminations challenges the diffraction methods. Solid-state (SS)NMR spectroscopy, especially 1 H SSNMR, is a promising approach for scrutinizing the surface terminations and the intercalated water in an atomistic-scale, yet only a few SSNMR studies in MXenes have been reported to date offering conflicting results and limited understanding of -OH terminations. Here, we used 1 H SSNMR experiments in concert with the DFT calculations of NMR parameters to identify multiple types of -OH groups, residing on the external and internal surfaces, in a commonly studied MXene, Ti 3 C 2 T x . The study also identifies bulk-like water trapped between the MXene flakes and interfacial water stranded on the surface. Lastly, two-dimensional 1 H -1 H correlation spectra elucidated the water-surface interactions and the mechanism of de-intercalation of water upon annealing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗