Search NASA⌕ Search

SEARCH · Search NASA

Results for “Approximation methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
NASA NTRS2013

Trajectory Optimization Using Adjoint Method and Chebyshev Polynomial Approximation for Minimizing Fuel Consumption During Climb

This paper describes two methods of trajectory optimization to obtain an optimal trajectory of minimum-fuel- to-climb for an aircraft. The first method is based on the adjoint method, and the second method is based on a direct trajectory optimization method using a Chebyshev polynomial approximation and cubic spine approximation. The approximate optimal trajectory will be compared with the adjoint-based optimal trajectory which is considered as the true optimal solution of the trajectory optimization problem. The adjoint-based optimization problem leads to a singular optimal control solution which results in a bang-singular-bang optimal control.

Chebyshev Polynomial↗
NASA NTRS2009

Application of Reduced Order Transonic Aerodynamic Influence Coefficient Matrix for Design Optimization

Supporting the Aeronautics Research Mission Directorate guidelines, the National Aeronautics and Space Administration [NASA] Dryden Flight Research Center is developing a multidisciplinary design, analysis, and optimization [MDAO] tool. This tool will leverage existing tools and practices, and allow the easy integration and adoption of new state-of-the-art software. Today s modern aircraft designs in transonic speed are a challenging task due to the computation time required for the unsteady aeroelastic analysis using a Computational Fluid Dynamics [CFD] code. Design approaches in this speed regime are mainly based on the manual trial and error. Because of the time required for unsteady CFD computations in time-domain, this will considerably slow down the whole design process. These analyses are usually performed repeatedly to optimize the final design. As a result, there is considerable motivation to be able to perform aeroelastic calculations more quickly and inexpensively. This paper will describe the development of unsteady transonic aeroelastic design methodology for design optimization using reduced modeling method and unsteady aerodynamic approximation. The method requires the unsteady transonic aerodynamics be represented in the frequency or Laplace domain. Dynamically linear assumption is used for creating Aerodynamic Influence Coefficient [AIC] matrices in transonic speed regime. Unsteady CFD computations are needed for the important columns of an AIC matrix which corresponded to the primary modes for the flutter. Order reduction techniques, such as Guyan reduction and improved reduction system, are used to reduce the size of problem transonic flutter can be found by the classic methods, such as Rational function approximation, p-k, p, root-locus etc. Such a methodology could be incorporated into MDAO tool for design optimization at a reasonable computational cost. The proposed technique is verified using the Aerostructures Test Wing 2 actually designed, built, and tested at NASA Dryden Flight Research Center. The results from the full order model and the approximate reduced order model are analyzed and compared.

Pak, Chan-gi↗
NASA NTRS1979

An improved analysis/synthesis capability based on dual methods - ACCESS 3

Approximation concepts and dual method algorithms are combined to create a new method for minimum weight design of structural systems. Approximation concepts convert the basic mathematical programming statement of the structural synthesis problem into a sequence of explicit primal problems of separable form. These problems are solved by constructing explicit dual functions, which are maximized subject to nonnegativity constraints. The dual method is successfully extended to deal with pure discrete and mixed continuous-discrete design variable problems. The power of the method presented is illustrated with numerical results for example problems, including a thin delta wing with fiber composite skins.

Schmit, L. A.↗
NASA NTRS1979

Perturbation solutions of combustion instability problems

A method involving approximate modal analysis using the Galerkin method followed by an approximate solution of the resulting modal-amplitude equations by the two-variable perturbation method (method of multiple scales) is applied to two problems of pressure-sensitive nonlinear combustion instability in liquid-fuel rocket motors. One problem exhibits self-coupled instability while the other exhibits mode-coupled instability. In both cases it is possible to carry out the entire linear stability analysis and significant portions of the nonlinear stability analysis in closed form. In the problem of self-coupled instability the nonlinear stability boundary and approximate forms of the limit-cycle amplitudes and growth and decay rates are determined in closed form while the exact limit-cycle amplitudes and growth and decay rates are found numerically. In the problem of mode-coupled instability the limit-cycle amplitudes are found in closed form while the growth and decay rates are found numerically. The behavior of the solutions found by the perturbation method are in agreement with solutions obtained using complex numerical methods.

Googerdy, A.↗
NASA NTRS1986

Comparative accuracy of selected multiple scattering approximations

Doubling method computational results which have yielded plane albedo, total transmission and fractional absorption for plane-parallel atmospheres composed of cloud droplets are presently compared with data obtained with selected radiative transfer approximations. The relative and absolute accuracies of asymptotic theory for thick layers and delta-Eddington, Meador-Weaver (1980) and Coakley-Chylek (1975) approximations are compared as a function of optical thickness, solar zenith angle, and single scattering albedo. The delta-Eddington approximation is the most accurate for conservative scattering when the solar zenith angle is small, while Meador-Weaver is the most accurate for nonconservative scattering.

King, M. D.↗
NASA NTRS1989

Methods for local gravity field approximation

The most widely known modern method for estimating gravity field values from observed data is least-squares collocation. Its advantages are that it can make estimates at arbitrary locations based on irregularly spaced observations, and that it makes use of statistical information about errors in the input data while providing corresponding information about the quality of the output estimates. Disadvantages of collocation include the necessity of inverting square matrices of dimension equal to the number of data values and the need to assume covariance models for the gravity field and the data errors. Fourier methods are an important alternative to collocation; having the advantage of greater computational efficiency, but requiring data estimates to be on a regular grid and not using or providing statistical accuracy information. The GEOFAST algorithm is an implementation of collocation that achieves high computational efficiency by transforming the estimation equations into the frequency domain where an accurate approximation may be made to reduce the workload. The forward and inverse Fast Fourier Transforms (FFTs) are utilized. The accuracy and computational efficiency of the GEOFAST algorithm is demonstrated using two sets of synthetic gravity data: marine gravity for an ocean trench region including wavelengths longer than 200 km; and local land gravity containing wavelengths as short as 5 km. These results are discussed along with issues such as the advantages of first removing reference field models before carrying out the estimation algorithm.

Sailor, R. V.↗
NASA NTRS1988

Explicit and implicit solution of the Navier-Stokes equations on a massively parallel computer

The design, implementation, and performance of a two-dimensional time-accurate Navier-Stokes solver for the CM2 supercomputer are described. The program uses a single processor for each grid point. Two different time-stepping methods have so far been implemented: an explicit third-order Runge-Kutta method and an implicit approximation-factorization method. The CM2 results are checked against those of a mature well-vectorized Cray 2 program, both for correctness and performance. The code is found to be correct, and the performance in some cases is up to several times that of the Cray 2.

Levit, Creon↗
NASA NTRSDate not supplied

Intent Modeling and Intent Conflict Probability Calculation for Operations in Upper Class E Airspace

This work presents probabilistic intent models for two typical vehicles in ETM operational environment. Several methods, including analytical methods for approximated solutions and a numerical method for exact solution, are presented and applied to compute the intent conflict probability for ETM operations. A comparison of these methods will be conducted in the final paper. Furthermore, simulations will be performed to verify the probabilistic intent model and verify the results of intent conflict probability from different methods.

Operational intent↗
NASA NTRS2003

An Approximate Dissipation Function for Large Strain Rubber Thermo-Mechanical Analyses

Mechanically induced viscoelastic dissipation is difficult to compute. When the constitutive model is defined by history integrals, the formula for dissipation is a double convolution integral. Since double convolution integrals are difficult to approximate, coupled thermo-mechanical analyses of highly viscous rubber-like materials cannot be made with most commercial finite element software. In this study, we present a method to approximate the dissipation for history integral constitutive models that represent Maxwell-like materials without approximating the double convolution integral. The method requires that the total stress can be separated into elastic and viscous components, and that the relaxation form of the constitutive law is defined with a Prony series. Numerical data is provided to demonstrate the limitations of this approximate method for determining dissipation. Rubber cylinders with imbedded steel disks and with an imbedded steel ball are dynamically loaded, and the nonuniform heating within the cylinders is computed.

Johnson, Arthur R.↗
NASA NTRS1976

A kinetic-theory approach to turbulent chemically reacting flows

The paper examines the mathematical and physical foundations for the kinetic theory of reactive turbulent flows, discussing the differences and relation between the kinetic and averaged equations, and comparing some solutions of the kinetic equations obtained by the Green's function method with those obtained by the approximate bimodal method. The kinetic method described consists essentially in constructing the probability density functions of the chemical species on the basis of solutions of the Langevin stochastic equation for the influence of eddies on the behavior of fluid elements. When the kinetic equations are solved for the structure of the diffusion flame established in a shear layer by the bimodal method, discontinuities in gradients of the mean concentrations at the two flame edges appear. This is a consequence of the bimodal approximation of all distribution functions by two dissimilar half-Maxwellian functions, which is a very crude approximation. These discontinuities do not appear when the solutions are constructed by the Green's function method described here.

Chung, P. M.↗
NASA NTRS1994

Designing An Approximately Balanced LQG Compensator

Method of designing approximately balanced, low-order linear-quadratic-Gaussian LQG compensator for use in feedback control of flexible structure devised. Low-order controller and estimator controls flexible structure efficiently.

Gawronski, Wodek↗
NASA NTRS1992

Radiation Transport Around Axisymmetric Blunt Body Vehicles Using a Modified Differential Approximation

A moment method for computing 3-D radiative transport is applied to axisymmetric flows in thermochemical nonequilibrium. Such flows are representative of proposed aerobrake missions. The method uses the P-1 approximation to reduce the governing system of integro-di erential equations to a coupled set of partial di erential equations. A numerical solution method for these equations given actual variations of the radiation properties in thermochemical nonequilibrium blunt body flows is developed. Initial results from the method are shown and compared to tangent slab calculations. The agreement between the transport methods is found to be about 10 percent in the stagnation region, with the difference increasing along the flank of the vehicle.

Hartung, Lin C.↗
NASA NTRS1996

Spline Approximation of Thin Shell Dynamics

A spline-based method for approximating thin shell dynamics is presented here. While the method is developed in the context of the Donnell-Mushtari thin shell equations, it can be easily extended to the Byrne-Flugge-Lur'ye equations or other models for shells of revolution as warranted by applications. The primary requirements for the method include accuracy, flexibility and efficiency in smart material applications. To accomplish this, the method was designed to be flexible with regard to boundary conditions, material nonhomogeneities due to sensors and actuators, and inputs from smart material actuators such as piezoceramic patches. The accuracy of the method was also of primary concern, both to guarantee full resolution of structural dynamics and to facilitate the development of PDE-based controllers which ultimately require real-time implementation. Several numerical examples provide initial evidence demonstrating the efficacy of the method.

delRosario, R. C. H.↗
NASA NTRS1992

Radiation transport around axisymmetric blunt body vehicles using a modified differential approximation

A moment method for computing 3D radiative transport in axisymmetric thermochemical nonequilibrium flows is developed. The method uses the P-1 approximation to reduce the governing system of integro-differential equations to a coupled set of partial differential equations. The numerical solution of these equations for realistic variations of the radiation properties is discussed. Representative results from the method are shown and compared to tangent slab calculations. The agreement between the transport methods is found to be about 10 percent in the stagnation region, with the difference increasing along the flank of the vehicle.

Hartung, Lin C.↗
NASA NTRS1988

A new method of imposing boundary conditions in pseudospectral approximations of hyperbolic equations

A new method to impose boundary conditions for pseudospectral approximations to hyperbolic equations is suggested. This method involves the collocation of the equation at the boundary nodes as well as satisfying boundary conditions. Stability and convergence results are proven for the Chebyshev approximation of linear scalar hyperbolic equations. The eigenvalues of this method applied to parabolic equations are shown to be real and negative.

Funaro, D.↗