Search NASA⌕ Search

SEARCH · Search NASA

Results for “Multilayer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

Ultrasonic evaluation of mechanical properties of thick, multilayered, filament-wound composites

A preliminary investigation is conducted to define capabilities and limitations of ultrasonic and acousto-ultrasonic measurements related to mechanical properties of filament wound graphite/epoxy composite structures. The structures studied are segments of filament wound cylinders formed of multiple layers of hoop and helical windings. The segments consist of 24 to 35 layers and range from 3.02 to 3.34 cm in wall thickness. The resultant structures are anisotropic, heterogeneous, porous, and highly attenuating to ultrasonic frequencies greater than 1 MHz. The segments represent structures to be used for Space Shuttle booster cases.Ultrasonic velocity and acousto-ultrasonic stress wave factor measurement approaches are discussed. Correlations among velocity, density, and porosity, and between the acousto-ultrasonic stress wave factor and interlaminar shear strength are presented.

Kautz, H. E.↗
NASA NTRS1990

Distributed structural control using multilayered piezoelectric actuators

A method of segmenting piezoelectric sensors and actuators is proposed which can preclude the currently experienced cancelation of sensor signals, or the reduction of actuator effectiveness, due to the integration of the property undergoing measurement or control. The segmentation method is demonstrated by a model developed for beam structures, to which multiple layers of piezoelectric materials are attached. A numerical study is undertaken of increasing active and passive damping of a beam using the segmented sensors and actuators over unsegmented sensors and actuators.

Cudney, Harley H.↗
NASA NTRS1990

Multilayer sea ice in the Arctic - Model- and satellite-derived

The behavior of sea ice is a strong function of ice strength which, in the central Arctic, depends on the relative fractions of multiyear and first-year ice coverage. A dynamic-thermodynamic sea ice model has been configured to include both multiyear and first-year ice. The model has been run for a 7-year period, 1979-1985, for which a satellite microwave record of multiyear sea ice coverage is available. The simulated concentrations of multiyear ice are slightly higher than the satellite-derived concentrations, although the total coverage of simulated multiyear ice agrees well with the satellite-derived coverage. Both the simulated and the satellite-derived coverages in the early 1980s show large interannual variations that represent potentially large perturbations in the mass balance of Arctic pack ice. These fluctuations are generally consistent in the model and satellite data, and they are generally consistent with year-to-year differences in the large-scale wind forcing. In at least some cases the wintertime distribution of multiyear ice is influenced by the pattern of ice drift as far back as the previous summer. The late December coverage of multiyear ice in the Alaskan region appears to foreshadow summer ice conditions in the same region. The short-term response to an intense synoptic system is considerably larger in the satellite data than in the model results.

Walsh, John E.↗
NASA NTRS1989

Distributed structural control using multilayered piezoelectric actuators. I - Analysis

Timoshenko beam theory is applied to beams with multiple layers of piezoelectric material attached. The model is developed using a Hamiltonian approach, and includes a model of the external electrical circuits to which the piezoelectric layers are attached, as well as a complete set of boundary conditions. The resulting model is then formulated in state space, and compared to a state space model of the standard Timoshenko beam.

Cudney, H. H.↗
NASA NTRS1991

Design and analysis of aspherical multilayer imaging X-ray microscope

Spherical Schwarzschild microscopes for soft X-ray applications in microscopy and projection lithography employ two concentric spherical mirrors that are configured such that the third-order spherical aberration and coma are zero. Based on incoherent, sine-wave MTF calculations, the object-plane resolution of a magnification-factor-20 microscope is presently analyzed as a function of object height and numerical aperture of the primary for several spherical Schwarzschild, conic, and aspherical two-mirror microscope configurations.

Shealy, David L.↗
NASA NTRS1991

Predictor-corrector procedures for thermal buckling analysis of multilayered composite plates

A study is made of two predictor-corrector procedures for the accurate determination of global, as well as detailed, thermal buckling response characteristics of composite plates. Both procedures use first-order shear deformation theory in the predictor phase, but differ in the elements of the computational model being adjusted in the corrector phase. The first procedure calculates a posteriori estimates of the composite correction factors and uses them to adjust the transverse shear stiffnesses of the plate. The second procedure calculates a posteriori the functional dependence of the displacement components on the thickness coordinate. The corrected quantities are then used in conjunction with three-dimensional equations to obtain better estimates for the different response quantities. Extensive numerical results are presented, showing the effects of variation in the geometric and lamination parameters for antisymmetrically laminated composite plates subjected to uniform temperature rise, on the accuracy of the thermal buckling response obtained by predictor-corrector procedures.

Noor, A. K.↗
NASA NTRS1990

Fault characterization of a multilayered perceptron network

The results of a set of simulation experiments conducted to quantify the effects of faults in a classification network implemented as a three-layered perception model are reported. The percentage of vectors misclassified by the classification network, the time taken for the network to stabilize, and the output values are measured. The results show that both transient and permanent faults have a significant impact on the performance of the network. Transient faults are also found to cause the network to be increasingly unstable as the duration of a transient is increased. The average percentage of the vectors misclassified is about 25 percent; after relearning, this is reduced to 10 percent. The impact of link faults is relatively insignificant in comparison with node faults (1 percent versus 19 percent misclassified after relearning). A study of the impact of hardware redundancy shows a linear increase in misclassifications with increasing hardware size.

Tan, Chang H.↗
NASA NTRS1991

Wave propagation in a multilayered laminated cross-ply composite plate

Dispersion of guided waves in a cross-ply laminated plate has been studied here using a stiffness method and an exact method. It is shown that the number of laminae strongly influences the dispersion behavior. Further, it is found that when the number of laminae is sufficiently large, then the dispersion behavior can be predicted by treating the plate as homogeneous with six stiffness constants obtained by using an effective modulus method.

Shah, A. H.↗
NASA NTRS1991

Ultrasonic characterization of multilayered thick composite plates

Guided wave propagation in a periodically laminated plate is considered when each lamina is transversely isotropic with its symmetry axis lying in the plane of the graphite-epoxy plate. The dispersion behavior of propagation modes influences the dynamic response and can be used to ultrasonically characterize the mechanical properties of the laminated plate. It is assumed that fibers are oriented at 90 deg to one another in adjacent layers and all the laminae are of equal thickness. Results obtained are in good agreement with exact solutions of previous studies.

Karunasena, W.↗
NASA NTRS1992

Thermomechanical buckling and postbuckling of multilayered composite panels

A study is made of the thermomechanical buckling and postbuckling responses of flat unstiffened composite panels. The panels are subjected to combined temperature change and applied edge displacement. The analysis is based on a first-order shear deformation, von Karman type nonlinear plate theory. A mixed formulation is used with the fundamental unknowns consisting of the generalized displacements and the stress resultants of the plate. An efficient multiple-parameter reduction method is used in conjunction with mixed finite element models, for determining the stability boundary and postbuckling response. The reduction method is also used for evaluating the sensitivity coefficients which measure the sensitivity of the buckling and postbuckling responses to variations in the different lamination and material parameters of the panel. Numerical results are presented showing the effects of variations in the laminate stacking sequence, fiber orientation, number of layers and aspect ratio of the panels on their thermomechanical buckling and postbuckling responses and their sensitivity coefficients.

Noor, Ahmed K.↗
NASA NTRS1992

Postbuckling of multilayered composite plates subjected to combined axial and thermal loads

A study is made of the postbuckling response of composite plates subjected to combined axial and thermal loadings. The analysis is based on a first-order shear deformation, von Karman type of nonlinear plate theory. A mixed formulation is used with the fundamental unknowns consisting of the generalized displacements and the stress resultants of the plate. An efficient reduction method is used in conjunction with mixed finite element models for determining the stability boundary and the postbuckling response of the plate. Sensitivity derivatives are evaluated and used to study the sensitivity of the postbuckling response to variations in the different lamination and material parameters of the plate. For quasi-isotropic plates, numerical results are presented showing the effects of variations in the material characteristics and fiber orientation of individual layers on the postbuckling response of the plate.

Noor, Ahmed K.↗
NASA NTRS1993

Development Of Multilayer Metallic Mesh Low-Pass Infrared Filters

Prototype filters exhibit desired transmissivity vs. wavelength. Etched-metallic-film low-frequency-pass (long-wavelength-pass) filters with relatively sharp cut-on at wavelengths of 30 to 40 micrometers developed for use in infrared instruments. Filters particularly useful in observing astronomical bodies exhibiting wide temperature dynamic range. Reduction in signal dynamic range (due to temperature extremes) accomplished by blocking short-wavelength radiance by using low-pass metallic mesh filters.

Mobasser, Sohrab↗
NASA NTRS1992

Imaging performance of multilayer X-ray mirrors

We analyze soft X-ray images of the solar corona, obtained on the day of the solar eclipse in July 1991, and find that the deviations of our telescope mirror from the perfect surface are less than 1 A for spatial periods between 1 micron and 1 mm. Our thin film deposition technique allows us to reduce errors over larger periods to the 1 A level. Thus, we are able to produce larger (diameter over 20 cm) X-ray mirrors with diffraction limited resolution below 0.01 arcsec.

Spiller, Eberhard↗
NASA NTRS1993

Thermomechanical buckling of multilayered composite panels with cutouts

A study is made of the thermomechanical buckling of flat unstiffened composite panels with central circular cutouts. The panels are subjected to combined temperature changes and applied edge loading (or edge displacements). The analysis is based on a first-order shear deformation plate theory. A mixed formulation is used with the fundamental unknowns consisting of the generalized displacements and the stress resultants of the plate. Both the stability boundary and the sensitivity coefficients are evaluated. The sensitivity coefficients measure the sensitivity of the buckling response to variations in the different lamination and material parameters of the panel. Numerical results are presented showing the effects of the variations in the hole diameter, laminate stacking sequence, fiber orientation, and aspect ratio of the panel on the thermomechanical buckling response and its sensitivity coefficients.

Noor, Ahmed K.↗
NASA NTRS1992

Extrapolation limitations of multilayer feedforward neural networks

The limitations of backpropagation used as a function extrapolator were investigated. Four common functions were used to investigate the network's extrapolation capability. The purpose of the experiment was to determine whether neural networks are capable of extrapolation and, if so, to determine the range for which networks can extrapolate. The authors show that neural networks cannot extrapolate and offer an explanation to support this result.

Haley, Pamela J.↗
NASA NTRS1991

High-reflective multilayers as narrowband VUV filters

A novel coating has been developed for the 120-230 nm wavelength VUV region which yields significantly higher reflectivity over selectable bandwidths and can be used to fabricate high-performance narrowband reflection filters; the spectral properties of such filters are greatly enhanced through their use in tandem. The coating uses a combination of high and low refractive index dielectric pairs. The proper choice of high-low ratio reduces the effects of VUV absorption for high refractive index films whose extinction coefficient is much higher than for a low-index material.

Zukic, Muamer↗
NASA NTRS1993

Multilayer thin film design for far ultraviolet polarizers using an induced transmission and absorption technique

An explanation of induced transmission for spectral regions excluding the far ultraviolet (FUV) is given to better understand how induced transmission and absorption can be used to design effective polarizers in the FUV spectral region. We achieve high s-polarization reflectance and a high degree of polarization (P equals (Rs-Rp)/(Rs+Rp)) by means of a MgF2/Al/MgF2 three layer structure on an opaque thick film of Al as the substrate. For example, our polarizer designed for the Lyman-alpha line (lambda equals 121.6 nm) has 87.95 percent reflectance for the s-polarization case and 0.43 percent for the p-polarization case, with a degree of polarization of 99.03 percent. If a double reflection polarizer is made with this design, it will have a degree of polarization of 99.99 percent and s-polarization throughput of 77.35 percent.

Kim, Jongmin↗