Search NASA⌕ Search

SEARCH · Search NASA

Results for “Source sample”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Selective Sampling for Sensor Type Classification in Buildings

A key barrier to applying any smart technology to a building is the requirement of locating and connecting to the necessary resources among the thousands of sensing and control points, i.e., the metadata mapping problem. Existing solutions depend on exhaustive manual annotation of sensor metadata --- a laborious, costly, and hardly scalable process. To reduce the amount of manual effort required, this paper presents a multi-oracle selective sampling framework to leverage noisy labels from information sources with unknown reliability such as existing buildings, which we refer to as weak oracles, for metadata mapping. This framework involves an interactive process, where a small set of sensor instances are progressively selected and labeled for it to learn how to aggregate the noisy labels as well as to predict sensor types. Two key challenges arise in designing the framework, namely, weak oracle reliability estimation and instance selection for querying. To address the first challenge, we develop a clustering-based approach for weak oracle reliability estimation to capitalize on the observation that weak oracles perform differently in different groups of instances. For the second challenge, we propose a disagreement-based query selection strategy to combine the potential effect of a labeled instance on both reducing classifier uncertainty and improving the quality of label aggregation. We evaluate our solution on a large collection of real-world building sensor data from 5 buildings with more than 11,000 sensors of 18 different types. The experiment results validate the effectiveness of our solution, which outperforms a set of state-of-the-art baselines.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗
DOE OSTI2024

Executive summary of error sources in dynamic surface temperature measurements

Obtaining bulk T requires measuring apparent sample interface T surface , knowledge of any window conditions T window , and knowledge of thermal transport from the sample to the window. To obtain bulk T with uncertainties below 5% requires relatively small uncertainties in each of these areas, and large uncertainties in one area require smaller uncertainties in others to maintain the error budget. For example, if T window is known to 10%, a 5% total uncertainty can be obtained if T surface is known to 1% and combined transport uncertainties are known to 20%. If T surface can only be measured to 2%, combined transport uncertainties must be 17% to reach the same overall uncertainty. As the form of transport is unknown at high pressure, and window temperatures are difficult to measure by their very nature, reducing surface T uncertainties is the practical first step. Here we will discuss various error sources in the measurement of apparent T surface , and which ones must be correctly obtained prior to the experiment.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Ice-nucleating particles in precipitation samples from the Texas Panhandle

Ice-nucleating particles (INPs) influence the formation of ice crystals in clouds and many types of precipitation. This study reports unique properties of INPs collected from 42 precipitation samples in the Texas Panhandle region from June 2018 to July 2019. We used a cold stage instrument called the West Texas Cryogenic Refrigerator Applied to Freezing Test system to estimate INP concentrations per unit volume of air (nINP) through immersion freezing in our precipitation samples with our detection capability of >0.006 INP L -1 . A disdrometer was used for two purposes: (1) to characterize the ground-level precipitation type and (2) to measure the precipitation intensity as well as size of precipitating particles at the ground level during each precipitation event. While no clear seasonal variations of n INP values were apparent, the analysis of yearlong ground-level precipitation observation as well as INPs in the precipitation samples showed some INP variations, e.g., the highest and lowest n INP values at -25°C both in the summer for hail-involved severe thunderstorm samples (3.0 to 1130 INP L -1 ), followed by the second lowest at the same temperature from one of our snow samples collected during the winter (3.2 INP L -1 ). Furthermore, we conducted bacteria community analyses using a subset of our precipitation samples to examine the presence of known biological INPs. In parallel, we also performed metagenomics characterization of the bacterial microbiome in suspended ambient dust samples collected at commercial open-lot livestock facilities (cattle feedyards hereafter) in the Texas Panhandle (i.e., the northernmost counties of Texas, also known as “West Texas”) to ascertain whether local cattle feedyards can act as a source of bioaerosol particles and/or INPs found in the precipitation samples. Some key bacterial phyla present in cattle feedyard samples appeared in precipitation samples. However, no known ice nucleation active species were detected in our samples. Overall, our results showed that cumulative n INP in our precipitation samples below -20°C could be high in the samples collected while observing > 10 mm h -1 precipitation with notably large hydrometeor sizes and an implication of cattle feedyard bacteria inclusion.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Device and system for selective ionization and analyte detection and method of using the same

Disclosed herein are embodiments of a system for selectively ionizing samples that may comprise a plurality of different analytes that are not normally detectable using the same ionization technique. The disclosed system comprises a unique split flow tube that can be coupled with a plurality of ionization sources to facilitate using different ionization techniques for the same sample. Also disclosed herein are embodiments of a method for determining the presence of analytes in a sample, wherein the number and type of detectable analytes that can be identified is increased and sensitivity and selectivity are not sacrificed.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2021

Device and system for selective ionization and analyte detection and method of using the same

Disclosed herein are embodiments of a system for selectively ionizing samples that may comprise a plurality of different analytes that are not normally detectable using the same ionization technique. The disclosed system comprises a unique split flow tube that can be coupled with a plurality of ionization sources to facilitate using different ionization techniques for the same sample. Also disclosed herein are embodiments of a method for determining the presence of analytes in a sample, wherein the number and type of detectable analytes that can be identified is increased and sensitivity and selectivity are not sacrificed.

Denis, Elizabeth↗
DOE OSTI2022

Simultaneous imaging and diffraction in the dynamic diamond anvil cell

The ability to visualize a sample undergoing a pressure-induced phase transition allows for the determination of kinetic parameters, such as the nucleation and growth rates of the high-pressure phase. For samples that are opaque to visible light (such as metallic systems), it is necessary to rely on x-ray imaging methods for sample visualization. Here, we present an experimental platform developed at beamline P02.2 at the PETRA III synchrotron radiation source, which is capable of performing simultaneous x-ray imaging and diffraction of samples that are dynamically compressed in piezo-driven diamond anvil cells. This setup utilizes a partially coherent monochromatic x-ray beam to perform lensless phase contrast imaging, which can be carried out using either a parallel- or focused-beam configuration. The capabilities of this platform are illustrated by experiments on dynamically compressed Ga and Ar. Melting and solidification were identified based on the observation of solid/liquid phase boundaries in the x-ray images and corresponding changes in the x-ray diffraction patterns collected during the transition, with significant edge enhancement observed in the x-ray images collected using the focused-beam. These results highlight the suitability of this technique for a variety of purposes, including melt curve determination.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Systems, method and computer-accessible medium for providing balanced asymmetric interferometry for vibrationally isolated optical scanning probe(s)

An exemplary apparatus can provide radiation to a sample(s), which can include, for example, a radiation source arrangement configured to provide radiation, a beam splitter configured to split the radiation into (i) a first radiation, and (ii) a second radiation. An optical element can also be provided which, in operation, can, e.g., (a) receive the first radiation and the second radiation, (b) reflect the first radiation as a reference radiation, (c) provide the second radiation as illumination for the sample(s), (d) receive a resultant radiation from the sample(s) that can be based on the illumination from the second radiation, and (e) provide the reference radiation and the resultant radiation to be detected and used for interferometric imaging or spectroscopy.

McLeod, Alexander Swinton↗
DOE OSTI2019

Identifying the 3FHL Catalog. I. Archival Swift Observations and Source Classification

We present the results of an identification campaign of unassociated sources from the Fermi Large Area Telescope 3FHL catalog. Out of 200 unidentified sources, we selected 110 sources for which archival Swift-XRT observations were available, 52 of which were found to have exactly one X-ray counterpart within the 3FHL 95% positional uncertainty. In this work, we report the X-ray, optical, IR, and radio properties of these 52 sources using positional associations with objects in various catalogs. The Wide-field Infrared Survey Explorer color–color plot for sources suggests that most of these belong to the blazar class family. The redshift measurements for these objects range from z = 0.277 to z = 2.1. Additionally, under the assumption that the majority of these sources are blazars, three machine-learning algorithms are employed to classify the sample into flat spectrum radio quasars or BL Lacertae objects. Finally, these suggest that the majority of the previously unassociated sources are BL Lac objects, in agreement with the fact the BL Lac objects represent by far the most numerous population detected above 10 GeV in 3FHL.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2026

X-ray Response of the Fully-Depleted, p-Channel SiSeRO-CCD

We present an X-ray characterization of a fully depleted, 725 $μ$m thick p-channel SiSeRO CCD. Measurements with a $^{55}$Fe source yield an energy resolution of $54 \pm 0.9$ eV ($14.6 \pm 0.25 e^{-}$) at 5.9 keV for single-pixel events, demonstrating that the SiSeRO amplifier preserves the intrinsic charge resolution of the CCD under multi-sample non-destructive readout. Characterization with a $^{241}$Am source extends the response to higher-energy photons, with reconstructed spectral features observed between 9-26 keV and the 59.5 keV $γ$ emission. These measurements, together with a muon-derived diffusion calibration, show that charge transport and diffusion are consistent with interactions spanning the full sensor depth. These results demonstrate that the SiSeRO CCD simultaneously achieves sub-electron noise performance and efficient charge collection in a thick, fully depleted silicon detector. This combination enables X-ray spectroscopy across a broad energy range while maintaining sensitivity to faint signals.

Cuevas-Zepeda, Julian↗
DOE OSTI2018

Comparative SEM and TEM analyses of apatite phases prepared by a multi-sample loading device

Highlights: • A multi-sample loading device which ultrasonically disperses samples was developed. • Comparative EM analyses on various apatite phases were efficiently carried out. • SEM-EDS data revealed distinctive values of O/P and Ca/P intensity ratios. • TEM-SAED data presented characteristic structural features of apatite phases. • Lattice parameters of bone and fossil apatite were affected by CO{sub 3} content. - Abstract: Comparative chemical and structural characterization of various apatite phases from both synthetic and natural sources were carried out by utilizing a multi-sample loading device developed for scanning electron microscopy (SEM) and transmission electron microscopy (TEM) analyses. The device is capable of spraying nanoparticles via ultrasonication, and four separate samples were loaded on a single TEM grid by a masking tool to characterize different apatite phases in consistent instrumental and analytical conditions. SEM energy dispersive spectroscopy (EDS) analysis of the apatite samples revealed distinctive values of O/P and Ca/P intensity ratios except for the fossil apatite due to its high proportion of externally originating phases. Selected area electron diffraction (SAED) pattern analysis presented the characteristic lattice parameters of the apatite phases, especially the bone and fossil apatite which had CO{sub 3}in their chemistry. Analyzing distinctive chemical and structural features among varied apatite phases can be efficiently carried out through electron microscopy with multiple samples on a single TEM grid, and such methods can be employed for characterizing a wider range of materials.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Investigating Particle Phase State Dependencies during a Historic Pacific Northwest Wildfire Event

The function and lifetime of an atmospheric particle are greatly dependent upon its phase state. Studying particle phase states from specific ambient source types is often challenging due to uncontrolled environmental conditions and multiple source contributions. However, a historic Pacific Northwest wildfire event occurred in September 2020, providing a rare opportunity to study a pseudo-single particle type ambient sample (i.e., wildfire) over time. Sampling was performed in Richland, Washington, capturing aged particles from shifting wildfire sources. In addition to source variability, temporal variation in wildfire particle phase state was observed from single particle analyses. Despite this, single particle elemental compositions were homogenous over time (=87% carbonaceous) with no significant temporal variation in organic functional group abundances within individual particles either (e.g., 4% relative standard deviation in alkene contributions). While particle composition is indeed known to affect phase state, water uptake appeared to be the most significant contributor to phase state variability amongst single particles here, as particle aspect ratios (related to phase state) linearly correlated with ambient relative humidity during sampling (R2 = 0.65). Therefore, while limited to a case study, meteorological considerations are found to convey greater comparative importance than particle composition for aged particle phase state predictions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Pragmatic protocols for working cleanly when measuring ice nucleating particles

We report that measuring ice nucleating particles (INPs) is critical for understanding, and modeling, cloud formation, reflectivity, and precipitation patterns. However, because INPs are very rare in the atmosphere, but abundant—sometimes alarmingly so—in the dust that covers all work surfaces, contamination during processing of collected aerosol samples can be a significant hindrance to obtaining accurate measures of INPs. In preparing this technical note, we questioned the cleanliness of every collection and processing step involved in making immersion freezing measurements of INPs re-suspended from filter samples. The aim was to identify, and then minimize, all potential sources of significant contamination, including containers and tools used to store filters and prepare liquid suspensions, gloves, work surfaces, and the polymerase chain reaction (PCR) trays commonly used for sample analysis. While plasticware released few INPs, most gloves readily shed them, but this can be mitigated by using washed cleanroom vinyl or polyethylene gloves. Work surfaces, even those that had been cleaned, were prodigious reservoirs of contaminating INPs, but simply covering them with aluminum foil will provide an INP-free surface. By applying these practices, we developed a method to reduce the background level of INPs on Nuclepore™ polycarbonate filters in our tests to 0 at -25 °C and < 20 at -27 °C, making them suitable for use in all sampling environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Adaptive Sample Preparation and Target Fabrication for High-Throughput Materials Science

High-repetition-rate brilliant and coherent light sources are significantly increasing the rate at which scientific experiments can be performed. An investment in transformative technologies to make samples of condensed matter could enable a paradigm shift for that field or open new exciting frontiers in high-energy density science (HEDS). This will especially be true for dynamic materials in extremes research or HEDS, where the repetition rate for placing samples into extreme environments is increasing and the samples or targets are irreversibly destroyed in each experiment. Research teams that are able to implement solutions to all aspects of the experimental process and enable a paradigm of high-throughput science will have the greatest success and impact. There are two different directions for adaptive samples. One is research when the number of experiments can be greatly increased with increased volume, such as in high energy density science. The other is when flexibility and agility can aid Bayesian optimization computational methods and speed up the discovery process, as with materials science. Conducting a similar equation-of-state (EOS) experiment took three years on the OMEGA laser facility, compared to five days of shifts at the LCLS XFEL. New materials with improved properties have been found by guided optimization of experimental science. Adaptive sample preparation and target fabrication can create a tremendous return on scientific investment. High-throughput enabling precision science is also a desirable goal. To address these issues, we sought a diverse set of innovative participants who had ideas of how to achieve this paradigm shift. We invited 42 researchers from a variety of disciplines and fields to attend a workshop in College Station, Texas, May 14–16, 2019. Many of the participants had never been in the same room before, and most found it very exciting to hear about new and different research. The goal was twofold: to define the challenges, i.e., “what would we like to be able to do and why it is difficult to do so,” and to describe the progress, approaches and capabilities, as well as the vision, “what we could do if we had more support.”

36 MATERIALS SCIENCE↗
DOE OSTI2018

Applying the principles of isotope analysis in plant and animal ecology to forensic science in the Americas

Forensic science is an applied science that helps investigators answer questions at the heart of a crime: Who, What, When, Where, and How. As part of that process, forensic practitioners use basic laws of chemistry and physics to examine evidence and theories of origin to interpret said evidence. Ecological research has had an extraordinary impact on forensic science through the development and application of a specialized measurement technique useful for examining evidence that appears chemically and physically identical: stable isotope analysis. In this review, we examine the proven utility of stable isotope analysis in forensic settings from an ecological perspective, concentrating on work from the Americas completed within the last three decades. Our primary focus is on the interpretation of stable isotope ratios using plant and animal physiological models for “source inference,” although we also recognize that sample-to-sample comparison of stable isotope ratios can be useful in many forensic settings. Examples of the forensic application of stable isotope analysis cover the gamut, from cotton used in counterfeit bills to anthrax shipped through the U.S. Postal Service, from beer adulterated with cheap adjuncts to human remains discovered in shallow graves and never identified. Recent methodological developments—including isotope analysis of specific compounds, multiple elements, and radioisotopes—and the generation of isotope landscapes, or isoscapes, approaches for data interpretation promises that stable isotope analysis will continue to be used in forensic settings for another three decades… and beyond.

Chesson, Lesley A.↗
DOE OSTI2025

An Integrated High-Speed Microstructural Characterization Method Using Simultaneous XRD, Stereo-DIC, and PCI

High-speed characterization of the deformation mechanisms in polycrystalline metals requires the quantification of full strain fields and local microstructural evolutions simultaneously. In this paper, we present a novel experimental method to integrate phase-contrast imaging (PCI), stereographic digital image correlation (stereo-DIC), and full-ring X-ray diffraction (XRD) to allow for the simultaneous characterization of polycrystalline metals at 1MHz or higher. A Kolsky bar was integrated into the synchrotron X-ray source in Sector 32 ID-B at the Advance Photon Source (APS) at Argonne National Laboratory. When the sample is dynamically loaded, the diagnostic methods of full-ring XRD, PCI, and stereo-DIC are properly synchronized to record the deformation behavior at both continuum and microstructural scales as a function of the loading history. An advanced high-strength steel (AHSS) is used as a model material to demonstrate the capabilities of this new experimental method.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Characterizing peak electricity demand for U.S. households: an assessment of end-use loads and demand factors

Understanding household peak electricity demand is critical to evaluate the technical need for electrical infrastructure upgrades. This study characterizes peak loads for existing and new equipment using metered data from a convenience sample of 11,940 U.S. dwellings from four sources, including 911 from two sources with end-use metering. After standardized data cleaning and labeling, we derived descriptive statistics for key metrics, such as maximum demand and demand factors, and developed predictive models relating 60- to 15-min demand for the National Electrical Code (NEC). Mean 15-min maximum demand was 9.7 kW (median 9.0 kW; IQR 7.0–11.5 kW, 95% CI 9.6–9.8 kW), indicating spare capacity in 98% of homes with hypothetical 100 A panels. Maximum demand increased with floor area and number of high-demand loads. Dwelling maximum demand was driven by higher-power, longer-duration heating appliances and vehicle charging, while most user-operated appliances contributed little. Demand factors are used to account for how most devices contribute less than their rated power to maximum demand. Existing load mean demand factors (28%; median 10%; IQR 0–58%; CI 28–29%) were higher than those for new loads (21%; median 7%; IQR 0–35%; CI 20–21%), because new loads changed the timing and magnitude of maximum demand. New high-demand loads had higher than average demand factors (40–60%). Whole dwelling demand factors support the NEC's 40% assumption, but they challenge its conservative 100% treatment of new HVAC. We propose a data-driven 50% demand factor for new equipment, which would align with metered data, improve affordability, and modernize electrical codes.

Appliances↗
DOE OSTI2019

Climate change impact on residual contaminants under sustainable remediation

This study investigates the potential impact of climate change on residual contaminants in vadose zones and groundwater. We assume that the effect of climate changes can be represented by perturbations in the natural recharge through the aquifer system. We perform numerical modeling of unsaturated/saturated flow and transport and consider different performance metrics: contaminant concentrations at observation wells and contaminant export at the site's boundary. We evaluate the effect of increasing and decreasing recharge as well as the impact of potential failure of surface capping structures employed to immobilize vadose zone contaminants. Our approach is demonstrated in a real case study by simulating transport of non-reactive radioactive tritium at the U.S. Department of Energy's Savannah River Site. Results show that recharge changes significantly affect well concentrations: after an initial slight dilution we identify a significant concentration increase at different observation wells some years after the recharge increase and/or the cap failure, as a consequence of contaminants' mobilization. This effect is generally emphasized and occurs earlier as the recharge increases. Under decreased aquifers' recharge the concentration could slightly increase for some years, due to a decrease of dilution, depending on the magnitude of the negative recharge shift. We identify trigger levels of recharge above which the concentration/export breakthrough curves and the time of exceedance of the Maximum Contaminant Level for tritium are remarkably affected. Moreover, we observe that the contaminant export at the control plane, identified as the risk pathway to the downgradient population, may only be minimally affected by shifts in the natural recharge regime, except for some extreme cases. We conclude that more frequent sampling and in-situ monitoring near the source zone should be adopted to better explain concentrations' anomalies under changing climatic conditions. Moreover, the maintenance of the cap is critical not only to sequester residual contaminants in the vadose zone, but also to reduce the uncertainty associated with future precipitation changes. Finally, realistic flow and transport simulations achieved through proper calibration processes, rather than conservative modeling, should be adopted to identify non-trivial trade-offs which enable better allocation of resources towards reducing uncertainty in decision making.

54 ENVIRONMENTAL SCIENCES↗