Search NASA⌕ Search

SEARCH · Search NASA

Results for “serialization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

The SMART MIL-STD-1553 bus adapter hardware manual

The SMART Multiplexer Interface Adapter, (SMIA) a complete system interface for message structure of the MIL-STD-1553, is described. It provides buffering and storage for transmitted and received data and handles all the necessary handshaking to interface between parallel 8-bit data bus and a MIL-STD serial bit stream. The bus adapter is configured as either a bus controller of a remote terminal interface. It is coupled directly to the multiplex bus, or stub coupled through an additional isolation transformer located at the connection point. Fault isolation resistors provide short circuit protection.

Ton, T. T.↗

Parallel processing implementations of a contextual classifier for multispectral remote sensing data

The applicability of parallel processing schemes to the implementation of a contextual classification algorithm which exploits the spatial and spectral context of a multispectral remote sensing pixel to achieve classification is examined. Two algorithms for classifying each multivariate pixel taking into account the probable classifications of neighboring pixels are presented which make use of a size three horizontally linear neighborhood, and the serial computational complexity of the more efficient algorithm is shown to grow in proportion to the number of pixels and the cube of the number of possible categories. The implementation of the more efficient algorithm on a CDC Flexible Processor system and on a multimicroprocessor system such as the proposed PASM is then discussed. It is noted that the use of N processors to perform the calculations N times faster than a single processor overcomes the principal disadvantage of contexual classifiers, i.e., their computational complexity.

Siegel, H. J.↗

Inventory estimation on the massively parallel processor

This paper describes algorithms for efficiently computing inventory estimates from satellite based images. The algorithms incorporate a one dimensional feature extraction which optimizes the pairwise sum of Fisher distances. Biases are eliminated with a premultiplication by the inverse of the analytically derived error matrix. The technique is demonstrated with a numerical example using statistics obtained from an actual Landsat scene. Attention was given to implementation of the Massively Parallel processor (MPP). A timing analysis demonstrates that the inventory estimation can be performed an order of magnitude faster on the MPP than on a conventional serial machine.

Argentiero, P. D.↗

Converting Time Signals From BCD to IRIG-B

Coded representation of time signals--day, hour, minute, second--is changed from binary-coded decimal (BCD) to IRIG standard time-code format B by circuit that uses nine integrated circuits. Input to code-converter circuit is parallel BCD pulses on bus output is serial pulses of IRIG-B on single line.

Houston, J. B.↗

Motor power factor controller with a reduced voltage starter

A power factor type motor controller is disclosed in which the conventional power factor constant voltage command signal is replaced during a starting interval with a graduated control voltage. This continuation-impart of a pending patent application (Serial No. 199, 765: Three Phase Factor Controller) provides a means for modifying the operation of the system for a motor start-up interval of 5 to 30 second. Using a ramp generators, an initial ramp-like signal replaces a constant power factor signal supplied by a potentiometer. The ramp-like signal is applied to a 15 terminal where it is summed with an operating power factor signal from phase detectors in order to obtain a control signal for ultimately controlling SCR devices. The SCR devices are turned on at an advancing rate with time responsive to the combination signal described rather than simply a function of a ramp-like signal alone.

Nola, F. J.↗

SAR processing on the MPP

The processing of synthetic aperture radar (SAR) signals using the massively parallel processor (MPP) is discussed. The fast Fourier transform convolution procedures employed in the algorithms are described. The MPP architecture comprises an array unit (ARU) which processes arrays of data; an array control unit which controls the operation of the ARU and performs scalar arithmetic; a program and data management unit which controls the flow of data; and a unique staging memory (SM) which buffers and permutes data. The ARU contains a 128 by 128 array of bit-serial processing elements (PE). Two-by-four surarrays of PE's are packaged in a custom VLSI HCMOS chip. The staging memory is a large multidimensional-access memory which buffers and permutes data flowing with the system. Efficient SAR processing is achieved via ARU communication paths and SM data manipulation. Real time processing capability can be realized via a multiple ARU, multiple SM configuration.

Batcher, K. E.↗

ID slicing and the automated factory

The automation of the slicing system utilizing internal-diameter saws for the production of the silicon wafers used in solar arrays is discussed. It is argued that saw productivity can be increased by reducing silicon waste, decreasing usage of consumables, keeping the saw slicing, and increasing the cutting speed. Several machine enhancements utilizing automatic control are discussed. The need for record keeping to anticipate maintenance operations is noted, and a digital serial communication interface with the microprocessor-based saws is recommended. Distributed control of the manufacturing process is discussed in detail, and is recommended as a method for increasing productivity.

Lewandowski, T.↗

A simple atmospheric model on the sphere with 100% parallelism

A simple shallow water equations model used to test numerical weather prediction schemes is presented. The spherical geometry is transformed into a formally doubly periodic configuration which can be implemented on a massively parallel computer at 100% parallelism. A nonstaggered grid with all variables defined at the grid points (circles) is used. The parallel structure was simulated by performing step 1 in a FORTRAN array, on an Amdahl serial machine, changing the signs of the winds on the dark side.

Kalnay, E.↗

A general method to determine the stability of compressible flows

Several problems were studied using two completely different approaches. The initial method was to use the standard linearized perturbation theory by finding the value of the individual small disturbance quantities based on the equations of motion. These were serially eliminated from the equations of motion to derive a single equation that governs the stability of fluid dynamic system. These equations could not be reduced unless the steady state variable depends only on one coordinate. The stability equation based on one dependent variable was found and was examined to determine the stability of a compressible swirling jet. The second method applied a Lagrangian approach to the problem. Since the equations developed were based on different assumptions, the condition of stability was compared only for the Rayleigh problem of a swirling flow, both examples reduce to the Rayleigh criterion. This technique allows including the viscous shear terms which is not possible in the first method. The same problem was then examined to see what effect shear has on stability.

Guenther, R. A.↗

Formation of peptides from amino acids by single or multiple additions of ATP to suspensions of nucleoproteinoid microparticles

The synthesis of peptides from individual amino acids or pairs of amino acids and ATP in the presence of catalysis by nucleoproteinoid microparticles is investigated. Experiments were performed with suspensions formed from the condensation of lysine-rich and acidic proteinoids with polyadenylic acid, to which were added glycine, phenylalanine, proline, lysine or glycine-phenylalanine mixtures, and ATP either at once or serially. Peptide yields are found to be greatest for equal amounts of acidic and basic proteinoids. The addition of imidazole is found to alter the preference of glycine-phenylalanine mixtures to form mixed heteropeptides rather than homopeptides. A rapid ATP decay in the peptide synthesis reaction is observed, and a greater yield is obtained for repeated small additions than for a single addition of ATP. The experimental system has properties similar to modern cells, and represents an organizational unit ready for the evolution of associated biochemical pathways.

Nakashima, T.↗

Performance analysis for the expanding search PN acquisition algorithm

An approach is described for approximating the cumulative probability distribution of the acquisition time of the serial pseudonoise (PN) search algorithm. The results are applicable to both variable and fixed dwell time systems. The theory is developed for the case where some a priori information is available on the PN code epoch (reacquisition problem or acquisition of very long codes). Also considered is the special case of a search over the whole code. The accuracy of the approximation is demonstrated by comparisons with published exact results for the fixed dwell time algorithm.

Braun, W. R.↗

Symbiosis in cell evolution: Life and its environment on the early earth

The book treats cell evolution from the viewpoint of the serial endosymbiosis theory of the origin of organelles. Following a brief outline of the symbiotic theory, which holds that eukaryotes evolved by the association of free-living bacteria with a host prokaryote, the diversity of life is considered, and five kingdoms of organisms are distinguished: the prokaryotic Monera and the eukaryotic Protoctista, Animalia, Fungi and Plantae. Symbiotic and traditional direct filiation theories of cell evolution are compared. Recent observations of cell structure and biochemistry are reviewed in relation to early cell evolution, with attention given to the geological context for the origin of eukaryotic cells, the origin of major bacterial anaerobic pathways, the relationship between aerobic metabolism and atmospheric oxygen, criteria for distinguishing symbiotic organelles from those that originated by differentiation, and the major classes of eukaryotic organelles: mitochondria, cilia, microtubules, the mitotic and meiotic apparatuses, and pastids. Cell evolution during the Phanerozoic is also discussed with emphasis on the effects of life on the biosphere

Margulis, L.↗

Labeling Solar-Cell Modules

Photocopying machine produces durable identification label. Process used for double glass photovoltaic-cell modules. Matrix of cells sandwiched between thin, flexible glass mats and covered above and below by protective sheets of glass. Label contains such information as manufacturer, model number, voltage and power ratings, and serial number. May also contain electrical-shock hazard warning and identification of positive and negative terminals. Method saves expense of procuring and applying conventional labels.

Watson, E. G.↗

The VLSI design of a single chip Reed-Solomon encoder

A design for a single chip implementation of a Reed-Solomon encoder is presented. The architecture that leads to this single VLSI chip design makes use of a bit serial finite field multiplication algorithm.

Truong, T. K.↗

RS-232 communications analyzer module for HP-1602A logic analyzer

The design and construction of a simple ASCII analyzer is described. It was built to interface directly to a Hewlett-Packard 1602A logic state analyzer but the circuitry could easily be configured to operate with any logic analyzer. The design of the ASCII analyzer allows the use of all the trace and delay functions for the HF-1602A. The ASCII analyzer circuit utilizes two universal Asynchronous Receiver/Transmitters (UAR/Ts) to simultaneously examine both the transmit and receive serial data lines. Baud rates from 300 to 9600 bits per second are selectable with the externally mounted DIP switch. The unit requires no external power supply connection and all of the integrated circuits are CMOS for low power consumption.

Yost, S. R.↗

Thematic mapper protoflight model preshipment review data package. Volume 4: Appendix. Part A: Multiplexer data book 2

Final performance test data for the thematic mapper flight model multiplexer are presented in tables. Aspects covered include A/D thresholds for bands 5, 6, and 7; cross talk; the thermistor; bilevel commands signal parameters; A/D threshold ambient, voltage margin low bus; serial data and bit clock parameters; and the wire check. Tests were conducted at ambient temperature.

Source record↗

Distributed multiport memory architecture

A multiport memory architecture is diclosed for each of a plurality of task centers connected to a command and data bus. Each task center, includes a memory and a plurality of devices which request direct memory access as needed. The memory includes an internal data bus and an internal address bus to which the devices are connected, and direct timing and control logic comprised of a 10-state ring counter for allocating memory devices by enabling AND gates connected to the request signal lines of the devices. The outputs of AND gates connected to the same device are combined by OR gates to form an acknowledgement signal that enables the devices to address the memory during the next clock period. The length of the ring counter may be effectively lengthened to any multiple of ten to allow for more direct memory access intervals in one repetitive sequence. One device is a network bus adapter which serially shifts onto the command and data bus, a data word (8 bits plus control and parity bits) during the next ten direct memory access intervals after it has been granted access. The NBA is therefore allocated only one access in every ten intervals, which is a predetermined interval for all centers. The ring counters of all centers are periodically synchronized by DMA SYNC signal to assure that all NBAs be able to function in synchronism for data transfer from one center to another.

Kohl, W. H.↗

Using radar image simulation to assess relative geometric distortions inherent in radar imagery

A unique method for observing the relative contributions of backscatter and propagation effects is afforded by radar image simulation. Digital terrain data are used in modeling radar image formation. Backscatter and propagation effects are modeled separately. These are incorporated serially and the image expression of each is noted. Sequences of images are presented illustrating these effects over a range of slopes and angles of incidence. The conclusions reached are that at angles of incidence that are smaller than the average slope of the terrain in a region, propagation phenomena predominate. As the angle of incidence increases beyond this, the radar image portrays an increasingly faithful representation of the backscatter from the ground. It is also demonstrated that digital simulation affords an important tool for evaluating complex interactions between the ground and radar, for training users in radar image interpretation, and for selecting optimum sensor parameters for particular applications.

Kaupp, V. H.↗