Search NASA⌕ Search

SEARCH · Search NASA

Results for “phase field method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Modeling asymmetric beams using higher-order phase-space moments

Shadwick et al. developed [Commun. Nonlinear. Sci. Numer. Simulat. 17, 2153-2160 (2012)] a self-consistent model of beam transport using a phase-space moment description (up to 2nd order) based on the Vlasov-Maxwell Hamiltonian structure. Tzoufras et al. have shown [Physics of Plasmas 16, 056705 (2009)] that for a laser-wakefield-accelerated electron beam, the spatial profile that minimizes the energy spread is a trapezoidal distribution. This profile is spatially asymmetric and thus cannot be described by only using moments less than order three, and so the moment method developed by Shadwick et al. was expanded upon to account for asymmetry by taking the profile to be a sum of two gaussian 'blobs.' It was found that, as long as the electric field across the beam was close to linear, treating the two blobs as separate species was a good approximation.

43 PARTICLE ACCELERATORS↗

Understanding Reentrance in Frustrated Magnets: The Case of the Er 2 Sn 2 O 7 Pyrochlore

Reentrance, the return of a system from an ordered phase to a previously encountered less-ordered one as a controlled parameter is continuously varied, is a recurring theme found in disparate physical systems, yet its microscopic cause is often not investigated thoroughly. Here, through detailed characterization and theoretical modeling, we uncover the microscopic mechanism behind reentrance in the strongly frustrated pyrochlore antiferromagnet Er 2 Sn 2 O 7 . We use single crystal heat capacity measurements to expose that Er 2 Sn 2 O 7 exhibits multiple instances of reentrance in its magnetic field B vs temperature T phase diagram for magnetic fields along three cubic high symmetry directions. Through classical Monte Carlo simulations, mean field theory, and classical linear spin-wave expansions, we argue that the origins of the multiple occurrences of reentrance observed in Er 2 Sn 2 O 7 are linked to soft modes. These soft modes arise from phase competition and enhance thermal fluctuations that entropically stabilize a specific ordered phase, resulting in an increased transition temperature for certain field values and thus the reentrant behavior. Our work represents a detailed examination into the mechanisms responsible for reentrance in a frustrated magnet and may serve as a template for the interpretation of reentrant phenomena in other physical systems.

36 MATERIALS SCIENCE↗

Neutrino fast flavor instability in three dimensions for a neutron star merger

The flavor evolution of neutrinos in core collapse supernovae and neutron star mergers is a critically important unsolved problem in astrophysics. Following the electron flavor evolution of the neutrino system is essential for calculating the thermodynamics of compact objects as well as the chemical elements they produce. Accurately accounting for flavor transformation in these environments is challenging for a number of reasons, including the large number of neutrinos involved, the small spatial scale of the oscillation, and the nonlinearity of the system. We take a step in addressing these issues by presenting a method which describes the neutrino fields in terms of angular moments. We apply our moment method to neutron star merger conditions and show it simulates fast flavor neutrino transformation in a region where this phenomenon is expected to occur. By comparing with particle-in-cell calculations we show that the moment method is able to capture the three phases of growth, saturation, and decoherence, and correctly predicts the lengthscale of the fastest growing fluctuations in the neutrino field.

79 ASTRONOMY AND ASTROPHYSICS↗

Low-energy enhancement in the magnetic dipole γ-ray strength functions of heavy nuclei

A low-energy enhancement (LEE), which was observed experimentally in the gamma-ray strength function (γSF) describing the decay of compound nuclei, would have profound effects on r-process nucleosynthesis if it persists in heavy neutron-rich nuclei. The LEE was shown to be a feature of the magnetic dipole (M1) strength function in configuration-interaction shell-model calculations in medium-mass nuclei. However, its existence in heavy open-shell nuclei remains an open question. Here, using a combination of many-body methods, we identify a LEE in the M1 γSFs of heavy samarium nuclei. In particular, we use the static-path plus random-phase approximation (SPA+RPA), which includes static and small-amplitude quantal fluctuations beyond the mean field. Using the SPA+RPA strength as a prior, we apply the maximum-entropy method (MEM) to obtain finite-temperature M1 γSFs from exact imaginary-time response functions calculated with the shell model Monte Carlo (SMMC) method. We find that the slope of the LEE in samarium isotopes is roughly independent of the average initial energy over a wide range below the neutron separation energy. As the neutron number increases, strength transfers to a low-energy excitation, which we interpret as the scissors mode built on top of excited states.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Phase retrieval and reconstruction of coherent synthesis by genetic algorithm

Abstract In the context of diffractive optics, phase retrieval is a heavily investigated process of recreating an entire complex electric field from partial amplitude-only information through iterative algorithms. However, existing methods can fall into local minima during reconstructions or struggle to recover unusual and novel electric field distributions. We present a numerical method based on a global-optimization genetic algorithm that reconstructs non-trivial electric field distributions from single diffracted intensity distributions. Diffraction and propagation of the optical fields over arbitrary distances is modeled through implementation of the angular spectrum technique. Additionally, a coherently-locked laser array system is used as an experimental case-study demonstrating 0.09 π phase reconstruction accuracy of initial laser parameters from single intensity images.

59 BASIC BIOLOGICAL SCIENCES↗

An Integrated High-Speed Microstructural Characterization Method Using Simultaneous XRD, Stereo-DIC, and PCI

High-speed characterization of the deformation mechanisms in polycrystalline metals requires the quantification of full strain fields and local microstructural evolutions simultaneously. In this paper, we present a novel experimental method to integrate phase-contrast imaging (PCI), stereographic digital image correlation (stereo-DIC), and full-ring X-ray diffraction (XRD) to allow for the simultaneous characterization of polycrystalline metals at 1MHz or higher. A Kolsky bar was integrated into the synchrotron X-ray source in Sector 32 ID-B at the Advance Photon Source (APS) at Argonne National Laboratory. When the sample is dynamically loaded, the diagnostic methods of full-ring XRD, PCI, and stereo-DIC are properly synchronized to record the deformation behavior at both continuum and microstructural scales as a function of the loading history. An advanced high-strength steel (AHSS) is used as a model material to demonstrate the capabilities of this new experimental method.

36 MATERIALS SCIENCE↗

UV light sensing properties of Sm doped vertically aligned ZnO nanorod arrays

Samarium doped ZnO nanorods were grown on silicon substrate by using vapor phase transport method (VPT) with the growth temperature of 950°C. The synthesized nanorods were characterized by XRD, field emission scanning electron microscopy, Raman spectra, and photocurrent measurements. The XRD result revealed that Sm was successfully doped into lattice plane of hexagonal ZnO nanorods. The FESEM result confirms the pure ZnO has nanorod like morphology with an average diameter and length of 130nm and 10µm respectively. The above observation is supported by the Micro-Raman spectroscopy result. The photocurrent in the visible region has been significantly enhanced due to deposition of Sm on the surface of the ZnO nanorods. Sm acts as a visible sensitizer because of its lower band gap compared to ZnO.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A test on reactive force fields for the study of silica dimerization reactions

We studied silica dimerization reactions in the gas and aqueous phase by density functional theory (DFT) and reactive force fields based on two parameterizations of ReaxFF. For each method (both ReaxFF force fields and DFT), we performed constrained geometry optimizations, which were subsequently evaluated in single point energy calculations using the other two methods. Standard fitting procedures typically compare the force field energies and geometries with those from quantum mechanical data after a geometry optimization. The initial configurations for the force field optimization are usually the minimum energy structures of the ab initio database. Hence, the ab initio method dictates which structures are being examined and force field parameters are being adjusted in order to minimize the differences with the ab initio data. As a result, this approach will not exclude the possibility that the force field predicts stable geometries or low transition states which are realistically very high in energy and, therefore, never considered by the ab initio method. Our analysis reveals the existence of such unphysical geometries even at unreactive conditions where the distance between the reactants is large. To test the effect of these discrepancies, we launched molecular dynamics simulations using DFT and ReaxFF and observed spurious reactions for both ReaxFF force fields. Our results suggest that the standard procedures for parameter fitting need to be improved by a mutual comparative method.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High-precision measurement of magnetic penetration depth in superconducting films

We report that the magnetic penetration depth (λ) in thin superconducting films is usually measured by the mutual inductance technique. The accuracy of this method has been limited by uncertainties in the geometry of the solenoids and in the film position and thickness, by parasitic coupling between the coils, etc. Here, we present several improvements in the apparatus and the method. To ensure the precise thickness of the superconducting layer, we engineer the films at atomic level using atomic-layer-by-layer molecular beam epitaxy. In this way, we also eliminate secondary-phase precipitates, grain boundaries, and pinholes that are common with other deposition methods and that artificially increase the field transmission and thus the apparent λ. For better reproducibility, the thermal stability of our closed-cycle cryocooler used to control the temperature of the mutual inductance measurement has been significantly improved by inserting a custom-built thermal conductivity damper. Next, to minimize the uncertainties in the geometry, we fused a pair of small yet precisely wound coils into a single sapphire block machined to a high precision. Lastly, the sample is spring-loaded to exactly the same position with respect to the solenoids. Altogether, we can measure the absolute value of λ with the accuracy better than ±1%.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ab initio study on fcc Pr with correlation matrix renormalization theory

Here, we studied fcc praseodymium (Pr) with the ab initio correlation matrix renormalization theory (CMRT) explicitly calculating the Coulomb interactions among basis orbitals and without using any adjustable parameters to work for strongly correlated electron systems. We calculated its total energy in a paramagnetic ground state and studied the role of the correlated 4f electrons in the system. Good agreement was obtained between CMRT and experiments in the pressure volume dependence of the fcc phase. We also compared the CMRT results against other theoretical methods including local density approximation + dynamical mean-field theory and showed consistent results among them. Moreover, we found the normalized local charge fluctuation of the 4f electrons as the function of volume exhibits a clear slope change at the volume collapse region, indicating a switch in their correlation nature there.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optimized perturbation theory for charged scalar fields at finite temperature and in an external magnetic field

Symmetry restoration in a theory of a self-interacting charged scalar field at finite temperature and in the presence of an external magnetic field is examined. The effective potential is evaluated nonperturbatively in the context of the optimized perturbation theory method. It is explicitly shown that in all ranges of the magnetic field, from weak to large fields, the phase transition is second order and that the critical temperature increases with the magnetic field. In addition, we present an efficient way to deal with the sum over the Landau levels, which is of interest especially in the case of working with weak magnetic fields.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Magnetic properties of the quasi-XY Shastry-Sutherland magnet ER 2 Be 2 SiO 7

Polycrystalline and single-crystal samples of the insulating Shastry-Sutherland compound Er 2 ⁢Be 2 ⁢SiO 7 were synthesized via a solid-state reaction and the floating zone method, respectively. The crystal structure, Er single-ion anisotropy, zero-field magnetic ground state, and magnetic phase diagrams along high-symmetry crystallographic directions were investigated with bulk measurement techniques, x-ray and neutron diffraction, and neutron spectroscopy. Here, we establish that Er 2 ⁢Be 2 ⁢SiO 7 crystallizes in a tetragonal space group with planes of orthogonal Er dimers and a strong preference for the Er moments to lie in the local plane perpendicular to each dimer bond. We also find that this system has a noncollinear ordered ground state in zero field with a transition temperature of 0.841 K consisting of antiferromagnetic dimers and in-plane moments. Finally, we mapped out the H-T phase diagrams for Er 2 ⁢Be 2 ⁢SiO 7 along the directions H ∥ [001], [100], and [110]. While an increasing in-plane field simply induces a phase transition to a field-polarized phase, we identify three metamagnetic transitions in the H ∥ [001] case. Single-crystal neutron diffraction results reveal that the H ∥ [001] phase diagram can be explained predominantly by the expected field-induced behavior of classical, anisotropic moments, although the microscopic origin of one phase requires further investigation.

36 MATERIALS SCIENCE↗

Benchmark problems for the Me soscale M ultiphysics Ph ase F i eld S imulator (MEMPHIS)

This report details the current benchmark results to verify, validate and demonstrate the capabilities of the in-house multi-physics phase-field modeling framework Me soscale M ultiphysics Ph ase F i eld S imulator (MEMPHIS) developed at the Center for Integrated Nanotechnologies (CINT). MEMPHIS is a general phase-field capability to model various nanoscience and materials science phenomena related to microstructure evolution. MEMPHIS has been benchmarked against a suite of reported 'classical' phase-field benchmark problems to verify and validate the correctness, accuracy and precision of the models and numerical methods currently implemented into the code.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Benchmark problems for the Mesoscale Multiphysics Phase Field Simulator (MEMPHIS)

This report details the current benchmark results to verify, validate and demonstrate the capabilities of the in-house multi-physics phase-field modeling framework Mesoscale Multiphysics Phase Field Simulator (MEMPHIS) developed at the Center for Integrated Nanotechnologies (CINT). MEMPHIS is a general phase-field capability to model various nanoscience and materials science phenomena related to microstructure evolution. MEMPHIS has been benchmarked against a suite of reported classical phase-field benchmark problems to verify and validate the correctness, accuracy and precision of the models and numerical methods currently implemented into the code.

74 ATOMIC AND MOLECULAR PHYSICS↗

Decoding Zeolite Crystallization and Stage III in Nuclear Waste Glasses by Coupled Modeling and Experiments

Under specific conditions of pH and temperature, nuclear waste immobilization borosilicate glasses may exhibit a sudden acceleration in their corrosion kinetics (stage III)—a behavior that has been associated with the formation of zeolite crystals. Such accelerated dissolution may compromise the integrity of nuclear wasteforms placed in geological depositories. However, thus far, none of the available models is able to predict the thermodynamic propensity and kinetics of zeolite precipitation as a function of the solution conditions due to (i) a lack of fundamental knowledge regarding the nucleation & growth mechanisms of zeolitic phases, (ii) uncertainty regarding the compositions (types) of zeolites that may form and the rate-limiting step in their precipitation as a function of the solution conditions, and (iii) the complexities that arise due to the vast parametric space (i.e., solution chemistry, temperature, number of secondary phases, etc.) that encompass these systems under conditions of environmental exposure. To resolve these challenges, this project aimed to unambiguously identify the thermodynamic propensity for zeolite precipitation and the kinetics thereof as a function of the solution conditions (composition, pH, and temperature). To achieve this goal: 1) We identified the solution conditions and zeolite phases relevant to nuclear glass dissolution. 2) We performed a series of ab initio molecular dynamics (AIMD) simulations to compute the thermodynamic properties of a group of characteristic zeolites that features a large range of compositions, various hydration levels, a wide range of framework structures, and partial atomic site occupancies. 3) We released a first-of-a-kind self-consistent thermodynamic database that can be used to assess the kinetics and the stability fields of zeolitic phases within a Gibbs energy minimization (GEM) framework. 4) We developed a robust geochemical modeling method allowing us to predict the stability of secondary phases (including zeolites, calcium–silicate–hydrate gels, and clays) upon the dissolution of nuclear waste immobilization glasses. 5) We introduced a model that predicts the dissolution kinetics of a series of borosilicate nuclear waste immobilization glasses in terms of the topology of their atomic network. 6) We investigated the roles of the solution composition on the crystallization kinetics of phillipsite zeolites and tobermorite silicate hydrates. Via PNNL’s collaboration and engagement, this project directly supports DOE’s nuclear waste immobilization activities by offering a technical, science-based foundation that will (i) facilitate predictions of the long-term corrosion rates and extents of existing nuclear waste immobilization glasses to help ensure safe and successful vitrification operations, (ii) inform the development of advanced glass formulations with enhanced durability, and, (iii) enable cost-savings that result from making more decisive and hence less conservative predictions while offering higher levels of nuclear waste embedment in smaller, more compact glass volumes.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Measurements of large scale disturbances in rectangular wall jets

Detailed measurements of the velocity field and wall surface pressure distribution of a tone-generating wall jet were obtained in the Ames 7- by 10-foot Wind Tunnel and anechoeic chamber. The jet issued from a 0.508 cm by 10.16 cm nozzle adjacent to a 3.81 cm wall, with an initially parabolic velocity profile at the exit. The jet was operated at Reynolds numbers, R, of 4910, 7740, and 9410. At R = 4910 and 7740, the flow appeared as a double-rowed vortex array which formed upstream of the edge and convected downstream without change in structure. At R = 9410, apparent vortex pairing occurred at the edge location. These flow characteristics were observed in both velocity field measurements and flow visualization records. The unsteady vorticity field of the jet was computed from phase-averaged hot-wire anemometer measurements of the velocity field. The associated acoustic field was estimated by the method of Green's functions, and was found to be similar to measurements of the sound field. These observations tend to support theoretical predictions that vortex shedding at the edge tends to cancel the effect of acoustic sources in other parts of the flow field.

Horne, W. C.↗

Coherent structures

In order to develop more quantitative measures of coherent structures that would have comparative value over a range of experiments, it is essential that such measures be independent of the observer. It is only through such a general framework that theories with a fundamental predictive value can be developed. The triple decomposition phi = bar-phi + phi(c) + phi(r) (where bar-phi is the mean, phi(c) is the coherent part, and phi(r) is the random part of any turbulent field phi) serves this purpose. The equations of motion for the mean and coherent flow fields, based on the triple decomposition, are presented and modeling methods for the time-averaged and phase-averaged Reynolds stress are discussed.

Speziale, Charles G.↗