Search NASA⌕ Search

SEARCH · Search NASA

Results for “ambient resonance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Lunar accelerometer network gravitational observatory (LANGO)

With ground-based interferometers detecting hundreds of gravitational-wave (GW) events, GW astronomy has continued to blossom. U.S. and European scientists are developing plans to construct third-generation ground-based interferometers. ESA has proceeded through the mission formulation phase of space-based interferometer in a lower-frequency band, 10 –4 –0.1 Hz. Despite all these exciting developments, there is still a missing frequency band, 0.1–10 Hz. This mid-frequency band is rich with interesting astrophysical events. Coalescence and merger of intermediate-mass black holes (IMBHs) will occur in this frequency band. Coalescing stellar-mass BHs will pass through this frequency band days before they reach the frequency band of LIGO and Virgo. Detection of such signals would enable a mid-frequency detector to issue an advance notice to the high-frequency GW detectors, as well as to optical, x-ray and γ-ray telescopes. We propose Lunar Accelerometer Network Gravitational Observatory (LANGO) to detect GWs in this frequency band. In the first phase (LANGO 1), we propose to deploy four ambient-temperature (250 K) accelerometers in the tetrahedral or in a square configuration on the hemisphere facing the Earth. After successful operation at 250 K, LANGO would be upgraded to a cryogenic (4 K) version with over two orders of magnitude increased sensitivity (LANGO 2), with coherent rejection of seismic noise implemented. LANGO is a full-tensor detector, capable of determining the source direction and wave polarization. Each test mass (TM) is suspended as a pendulum with resonance frequency ∼ 0.01 Hz, thus is only weakly coupled to the lunar surface horizontally. LANGO is designed to detect the relative motion of globally separated, nearly free, TMs by using the Moon as a large quiet platform. LANGO 1 and 2 accelerometers aim at sensitivities ⩽ 10 –11 m s –2 Hz –1/2 and ⩽ 10 –13 m s –2 Hz –1/2 in the horizontal axes over the frequency band of 1 mHz–10 Hz, which yield GW sensitivities 1.1 x 10 -21 Hz -1/2 and 3.8 x 10 -24 Hz -1/2 at 1 Hz, respectively. The LANGO accelerometers will be 10 3 –10 5 times more sensitive than Apollo seismometers. With such sensitivity, LANGO will also make great contribution to the advancement of lunar geophysics.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Material and Interface Engineering Strategies to Mitigate Decoherence in Superconducting Qubits

While significant strides have been made to increase the coherence time of superconducting qubits, further advancements are essential for realizing scalable quantum computing. Decoherence is often a result of loss and noise stemming from two-level systems and excess quasiparticles, arising due to material defects, fabrication processes, and ambient exposure, particularly at surfaces and interfaces. Our recent efforts to mitigate these decoherence mechanisms have employed a variety of strategies, including low-loss surface encapsulation materials, advanced substrate preparation techniques, modifications to metal film growth, and the development of novel fabrication processes. The structural and chemical properties of materials, surfaces, and interfaces are studied using scanning probe microscopy, electron microscopy, photoelectron spectroscopy, mass spectrometry, and X-ray diffraction, which is correlated to device performance metrics, including superconducting resonator internal quality factor and qubit T1 time. This information is used to identify and understand material sources of loss and their origins in the device fabrication process. Through multi-institution efforts within SQMS we have identified the loss mechanism of interstitial hydrogen in niobium-based devices and shown how standard fabrication processes introduce these hydrides, developing strategies to mitigate their formation.1 Furthermore, we have characterized the metal-substrate interface, including the loss of niobium-silicides formed at that interface, and developed silicon surface treatments that reduce atomic scale roughness and oxygen content at the metal-substrate and Josephson junction interfaces.2-4 By developing the connection between materials properties and the overall performance of superconducting quantum circuitry, we can develop fabrication strategies to mitigate material losses, thus supporting the ongoing efforts to enhance coherence time in superconducting quantum devices. 1. Torres-Castanedo, C. G.*, Goronzy, D. P.*, et al., Adv. Funct. Mater., 2401365 (2024) 2. Lu, X., et al., Phys. Rev. Materials 6, 064402 (2022) 3. Berti, G., Appl. Phys. Lett. 122, 192605 (2023) 4. Kopas, C. J., Goronzy, D. P., et al., arXiv:2408.02863 (2024)

Goronzy, Dominic P.↗
DOE OSTI2024

Enhanced superconducting qubit performance through ammonium fluoride etch

The performance of superconducting qubits is often limited by dissipation and two-level systems (TLS) losses. The dominant sources of these losses are believed to originate from amorphous materials and defects at interfaces and surfaces, likely as a result of fabrication processes or ambient exposure. Here, we explore a novel wet chemical surface treatment at the Josephson junction-substrate and the substrate-air interfaces by replacing a buffered oxide etch (BOE) cleaning process with one that uses hydrofluoric acid followed by aqueous ammonium fluoride. We show that the ammonium fluoride etch process results in a statistically significant improvement in median $\text{T}_1$ by $\sim22\%$ (p = 0.002), and a reduction in the number of strongly-coupled TLS in the tunable frequency range. Microwave resonator measurements on samples treated with the ammonium fluoride etch after niobium deposition and etching also show $\sim33\%$ lower TLS-induced loss tangent compared to the BOE treated samples. As the chemical treatment primarily modifies the Josephson junction-substrate interface and substrate-air interface, we perform targeted chemical and structural characterizations to examine materials differences at these interfaces and identify multiple microscopic changes that could contribute to decreased TLS losses.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Structural properties of plastically deformed SrTiO 3 and KTaO 3

Dislocation engineering has the potential to open new avenues toward the exploration and modification of the properties of quantum materials. Strontium titanate (SrTi⁢O 3 , STO) and potassium tantalate (KTa⁢O 3 , KTO) are incipient ferroelectrics that show metallization and superconductivity at extremely low charge-carrier concentrations and have been the subject of resurgent interest. These materials also exhibit remarkable ambient-temperature ductility, and thus represent exceptional platforms for studies of the effects of deformation-induced dislocation structures on electronic properties. Recent work on plastically deformed STO revealed an enhancement of the superconducting transition temperature and the emergence of local ferroelectricity and magnetism near self-organized dislocation walls. Here, in this work, we present a comprehensive structural analysis of plastically deformed STO and KTO, employing specially designed strain cells, diffuse neutron and x-ray scattering, Raman scattering, and nuclear magnetic resonance (NMR). Diffuse scattering and NMR provide insight into the dislocation configurations and densities and their dependence on strain. As in the prior work on STO, Raman scattering reveals evidence for local ferroelectric order near dislocation walls in plastically deformed KTO. Our findings provide valuable information about the self-organized defect structures in both materials, and they position KTO as a second model system in which to explore the associated emergent physics.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Improvements to the Faraday cup fast ion loss detector and magnetohydrodynamic induced fast ion loss measurements in Joint European Torus plasmas

Upgrades to electronic hardware and detector design have been made to the JET thin-foil Faraday cup fast ion loss detector in anticipation of the upcoming deuterium–tritium (DT) campaign. An improved foil stack design has been implemented, which greatly reduces the number of foil-to-foil shorts, and triaxial cabling has mitigated ambient noise pickup. Initial tests of 200 kHz digitizers, as opposed to the original 5 kHz digitizers, have provided enhanced analysis techniques and direct coherence measurements of fast ion losses with magnetohydrodynamic activity. Here, we present recent loss measurements in JET deuterium plasmas correlated with kink modes, fishbone modes, edge-localized modes, and sawteeth. Sources of systematic noise are discussed with emphasis on capacitive plasma pickup. Overall, the system upgrades have established a diagnostic capable of recording alpha particle losses due to a wide variety of resonant fast ion transport mechanisms to be used in future DT-experiments and modeling efforts.

47 OTHER INSTRUMENTATION↗
DOE OSTI2025

A Conjugated Oligoelectrolyte Exhibiting Room Temperature Spin-Correlated Radical Pair Character for Biological Sensing

We report a water-soluble conjugated oligoelectrolyte (COE) composed of carbazole-benzophenone, COE-CbzBP, that exhibits photogenerated spin-correlated radical pair (SCRP) behavior sensitive to static electric fields from DNA but not from lipid bilayers. The SCRP forms from a thermally activated, spin-polarized state enabled by partial π-conjugation disruption at the donor–acceptor (carbazole-benzophenone) nitrogen–carbon (N–C) junction, which facilitates a twisted intramolecular charge-transfer (TICT) geometry. This state minimizes the singlet–triplet energy gap (ΔE ST = 0.12 eV), radical–pair exchange coupling (J RP ∼ ΔE ST /2), and charge separation free energy (ΔG CS ) in both DNA (−0.19 eV) and lipid bilayers (−0.55 eV). Room-temperature continuous-wave electron paramagnetic resonance (CW-EPR) reveals a photogenerated spin-polarized singlet for COE-CbzBP that splits upon DNA association, consistent with modulation of J RP and hyperfine coupling (A x ), presumably via electric field-spin coupling. No spin-polarized signal was observed under dark, cryogenic conditions, or in liposomes, but was quenched by the spin trap 4-POBN. Transient absorption and spectroelectrochemistry confirmed magnetic-field sensitive long-lived excited-state absorption features attributed to charge-separated states 3 [Cbz •+ -BP •– ]*, which were lengthened by DNA, and quenched in lipid bilayers and 4-POBN. Quantum chemical simulations show that planar geometries (lipid-like) increase ΔE ST by 0.31 eV compared to TICT-optimized structures. This geometry-dependent modulation explains the absence of SCRP signatures in rigid environments, underscoring the importance of TICT states, minimized ΔE ST , and favorable ΔG CS for achieving room-temperature SCRP generation. These findings establish design principles for TICT-enabled molecules exhibiting qubit-like behavior that operate under ambient and biologically relevant conditions, with direct implications for quantum information science (QIS).

Aromatic compounds↗
DOE OSTI2020

Nano- to microscale three-dimensional morphology relevant to transport properties in reactive porous composite paint films

The quantitative evaluation of the three-dimensional (3D) morphology of porous composite materials is important for understanding mass transport phenomena, which further impact their functionalities and durability. Reactive porous paint materials are composites in nature and widely used in arts and technological applications. In artistic oil paintings, ambient moisture and water and organic solvents used in conservation treatments are known to trigger multiple physical and chemical degradation processes; however, there is no complete physical model that can quantitatively describe their transport in the paint films. In the present study, model oil paints with lead white (2PbCO 3 ·Pb(OH) 2 ) and zinc white (ZnO) pigments, which are frequently found in artistic oil paintings and are associated with the widespread heavy metal soap deterioration, were studied using synchrotron X-ray nano-tomography and unilateral nuclear magnetic resonance. This study aims to establish a relationship among the paints’ compositions, the 3D morphological properties and degradation. This connection is crucial for establishing reliable models that can predict transport properties of solvents used in conservation treatments and of species involved in deterioration reactions, such as soap formation.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Electrical control of coherent spin rotation of a single-spin qubit

Nitrogen vacancy (NV) centers, optically active atomic defects in diamond, have attracted tremendous interest for quantum sensing, network, and computing applications due to their excellent quantum coherence and remarkable versatility in a real, ambient environment. One of the critical challenges to develop NV-based quantum operation platforms results from the difficulty in locally addressing the quantum spin states of individual NV spins in a scalable, energy-efficient manner. Here, we report electrical control of the coherent spin rotation rate of a single-spin qubit in NV-magnet based hybrid quantum systems. By utilizing electrically generated spin currents, we are able to achieve efficient tuning of magnetic damping and the amplitude of the dipole fields generated by a micrometer-sized resonant magnet, enabling electrical control of the Rabi oscillation frequency of NV spins. Our results highlight the potential of NV centers in designing functional hybrid solid-state systems for next-generation quantum-information technologies. The demonstrated coupling between the NV centers and the propagating spin waves harbored by a magnetic insulator further points to the possibility to establish macroscale entanglement between distant spin qubits.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Direct Conversion of Methane to Ethylene and Acetylene over an Iron-Based Metal–Organic Framework

Conversion of methane (CH 4 ) to ethylene (C 2 H 4 ) and/or acetylene (C 2 H 2 ) enables routes to a wide range of products directly from natural gas. However, high reaction temperatures and pressures are often required to activate and convert CH 4 controllably, and separating C 2+ products from unreacted CH 4 can be challenging. Here, we report the direct conversion of CH 4 to C 2 H 4 and C 2 H 2 driven by non-thermal plasma under ambient (25 °C and 1 atm) and flow conditions over a metal–organic framework material, MFM-300(Fe). The selectivity for the formation of C 2 H 4 and C 2 H 2 reaches 96% with a high time yield of 334 μmol g cat –1 h –1 . At a conversion of 10%, the selectivity to C 2+ hydrocarbons and time yield exceed 98% and 2056 μmol g cat –1 h –1 , respectively, representing a new benchmark for conversion of CH 4 . In situ neutron powder diffraction, inelastic neutron scattering and solid-state nuclear magnetic resonance, electron paramagnetic resonance (EPR), and diffuse reflectance infrared Fourier transform spectroscopies, coupled with modeling studies, reveal the crucial role of Fe–O(H)–Fe sites in activating CH 4 and stabilizing reaction intermediates via the formation of an Fe–O(CH 3 )–Fe adduct. In addition, a cascade fixed-bed system has been developed to achieve online separation of C 2 H 4 and C 2 H 2 from unreacted CH 4 for direct use. Integrating the processes of CH 4 activation, conversion, and product separation within one system opens a new avenue for natural gas utility, bridging the gap between fundamental studies and practical applications in this area.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Structural and spectroscopic characterization of a Tb(IV) polyoxometalate

There has been a renaissance in high valent lanthanide chemistry, which has resulted in the first examples of tetravalent praseodymium (Pr) and terbium (Tb) in molecular systems. These feats have been achieved with tailored ligands that facilitate tetravalent lanthanide stability in non-aqueous conditions. The next step in realizing the potential of high valent lanthanide chemistry is moving towards complexes that are stable in ambient and aqueous conditions. In this investigation, we advance this paradigm by obtaining definitive evidence of Tb(IV) in a molecular system under aqueous conditions utilizing the lacunary Wells-Dawson polyoxometalate, K 10 P 2 W 17 O 61 •20H 2 O. Herein we present the single crystal structure of K 16 Tb(IV)(P 2 W 17 O 61 ) 2 •39.85H 2 O (Tb(IV)W 34 ) as well as extensive spectroscopic evidence obtained via UV–Vis-NIR, X-ray absorption near edge spectroscopy, continuous wave X-band electron paramagnetic resonance spectroscopy and SQUID magnetometry measurements to confirm the oxidation state of Tb in W 34 complexes as +4.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Improved high-gradient performance for medium-velocity superconducting half-wave resonators: Surface preparation and trapped flux mitigation

A development effort to improve the performance of superconducting radio-frequency half-wave resonators (SRF HWRs) is underway at the Facility for Rare Isotope Beams (FRIB), where 220 such resonators are in operation. Our goal was to achieve an intrinsic quality factor (𝑄 0 ) of ≥ 2 × 10 10 at an accelerating gradient (𝐸 acc ) of 12 MV/m. FRIB production resonators were prepared with buffered chemical polishing. First trials of electropolishing (EP) and post-EP low-temperature baking of FRIB HWRs allowed us to reach higher gradient (15 MV/m, limited by quench) with a higher quality factor at high gradient, but 𝑄 0 was still below our goal. Trapped magnetic flux during the Dewar test was found to be a source of 𝑄 0 reduction. Three strategies were used to reduce the trapped flux: (i) adding a local magnetic shield (LMGS) to supplement the “global” magnetic shield around the Dewar for reduction of the ambient magnetic field; (ii) performing a “uniform cooldown” (UC) to reduce the thermoelectric currents; and (iii) using a compensation coil to further reduce the ambient field with active field cancellation (AFC). The LMGS improved the 𝑄 0 , but not enough to reach our goal. With UC and AFC, we exceeded our goal, reaching 𝑄 0 = 2.8 ×10 10 at 𝐸 acc = 12 MV/m.

Cryogenics & vacuum technology↗
DOE OSTI2021

Characterizing the solid hydrolysis product, UF 4 (H 2 O) 2.5 , generated from neat water reactions with UF 4 at room temperature

Uranium tetrafluoride (UF 4 ) is an important intermediate in the production of UF 6 and uranium metal. Room temperature hydrolysis of UF 4 was investigated using a combination of Fluorine-19 nuclear magnetic resonance spectroscopy ( 19 F NMR), Raman and infrared spectroscopy, powder X-ray diffraction, and microscopy measurements. UF 4 (H 2 O) 2.5 was identified as the primary solid hydrolysis product when anhydrous UF 4 was stirred in deionized water. Static NMR and 19 F magic angle spinning NMR measurements revealed that a small amount of uranyl fluoride can also form when anhydrous UF 4 is left in water, although this species comprises less than 5% of the total sample with the remaining parts being UF 4 (H 2 O) 2.5 . Since UF 4 is generally considered to be stable under ambient conditions, these findings mark the first time that a room temperature reaction between UF 4 and water has been detected and analyzed without interference from additional chemical reagents. The Raman characterization of UF 4 (H 2 O) 2.5 presented herein is the first on record. Since UF 4 is one of the most used intermediates during chemical conversion of uranium ore to uranium metal for nuclear fuel and weapons, the results presented herein are applicable to numerous nuclear science fields where solid state detection of uranium is of value, including nuclear nonproliferation, nuclear forensics, and environmental remediation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

A versatile Johansson-type tender x-ray emission spectrometer

We present a high energy resolution x-ray spectrometer for the tender x-ray regime (1.6–5.0 keV) that was designed and operated at Stanford Synchrotron Radiation Lightsource. The instrument is developed on a Rowland geometry (500 mm of radius) using cylindrically bent Johansson analyzers and a position sensitive detector. By placing the sample inside the Rowland circle, the spectrometer operates in an energy-dispersive mode with a subnatural line-width energy resolution (~0.32 eV at 2400 eV), even when an extended incident x-ray beam is used across a wide range of diffraction angles (~30° to 65°). The spectrometer is enclosed in a vacuum chamber, and a sample chamber with independent ambient conditions is introduced to enable a versatile and fast-access sample environment (e.g., solid/gas/liquid samples, in situ cells, and radioactive materials). The design, capabilities, and performance are presented and discussed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2025

Microscopic Characterization of Pb 10−x Cu x (PO 4 ) 6 O by 31 P and 63/65 Cu NMR Measurements

The report of the first room-temperature, ambient-pressure superconductivity in copper-doped lead apatite Pb 10−x Cu x (PO 4 ) 6 O has attracted lots of attention. However, subsequent studies revealed the presence of numerous impurity phases in the polycrystalline sample, and the sharp superconducting-like transition is not due to a superconducting transition but most likely due to a reduction in resistivity caused by the first-order structural phase transition of Cu 2 S at around 385 K from the β phase at high temperature to the γ phase at low temperature. Before now, only bulk measurements have been performed on a Pb 10−x Cu x (PO 4 ) 6 O powder sample, which could be affected by the impurity phases, masking the intrinsic properties of Pb 10−x Cu x (PO 4 ) 6 O. In this study, 31 P and 63/65 Cu nuclear magnetic resonance (NMR) measurements have been performed on a Pb 10−x Cu x (PO 4 ) 6 O powder sample to investigate its physical properties from a microscopic point of view. Our NMR data evidence the non-magnetic insulating nature of Pb 10−x Cu x (PO 4 ) 6 O without any trace of electron correlation effects. Furthermore, the 63/65 Cu NMR results suggest that no copper or very little copper is substituted for Pb in Pb 10 (PO 4 ) 6 O prepared by sintering Pb 2 SO 5 and Cu 3 P.

lead apatite↗
DOE OSTI2020

Discrete Open-Shell Tris(bipyridinium radical cationic) Inclusion Complexes in the Solid State

In the solid state the properties of organic radicals depend heavily on radical-radical interactions that are influenced by the superstructure of the crystalline phase. Here, we report the synthesis and characterization of a substituted tetracationic cyclophane, cyclobis(paraquat-p-1,4- dimethoxyphenylene), and outline how its bisradical dicationic redox state associates with the methyl viologen radical cation (MV •+ ) to give a trisradical tricationic inclusion complex. The (super)structures of the reduced cyclophane and this 1:1 complex in the solid-state deviate from the analogous (super)structures observed for the reduced state of cyclobis(paraquat-p-phenylene) and that of its trisradical tricationic complex. Titration experiments with a range of guests reveal that the methoxy substituents on the para-xylenyl do not influence significantly of the binding affinity of the cyclophane for small neutral guests, whereas the affinity decreases by an order of magnitude for larger radical cationic guests such as MV •+ . X-Ray diffraction reveals that the solid- state structures of the tricationic trisradical complexes to be a discrete entity with weak intermolecular orbital overlap between the neighboring complexes. Transient nutation EPR experiment and DFT calculations confirm that the complex has a doublet spin configuration in the ground state as a result of the strong orbital overlap within the complex, while the quartet-state spin configuration is higher in energy and so is inaccessible at ambient temperature. The superconducting quantum interference device (SQUID) measurement reveals that trisradical tricationic complexes interact antiferromagnetically (J/k = - 2.33 K) and form a 1D Heisenberg antiferromagnetic chain along the a-axis in the crystal. Furthermore, these results offer new insights into the design and synthesis of organic magnetic materials based on host-guest inclusion complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Polarization and properties of low-frequency waves in warm magnetized two-fluid plasma

This paper presents the derivation of a general wave dispersion relation for warm magnetized plasma under the two-fluid formalism. The discussion is quite general except for the assumption of low frequency and slow phase speed, for which the displacement current is negligible, under the implicit assumption that the plasma is sufficiently dense to satisfy the condition ωpe>ωce, where ωpe and ωce denote the plasma oscillation frequency and electron gyro frequency, respectively. The present discussion does not invoke charge neutrality associated with the fluctuations although it is implicitly satisfied. The resulting dispersion relation that includes the fluid thermal effects shows that there are three eigen modes, which include those corresponding to ideal MHD, namely, fast, slow, and kinetic Alfvén waves, as well as higher-frequency modes including the ion and electron cyclotron and lower-hybrid resonances. The fluid effects in the ideal MHD wave branches are influenced by the finite Larmor radius scales, and when the wave number in the cross field direction is comparable to these values, the fluid effects become significant. It is found that the Larmor radius should be interpreted in the sense as ion-acoustic gyro-radius instead of ion thermal gyro radius only. That is, it is found that the electrons also contribute to the non-ideal effect associated with the kinetic Alfvén wave. A comprehensive explanation of the polarization of each mode is also presented. The present findings indicate that the polarity may change its sign only for the kinetic Alfvén mode branch and that such a transition is based on the propagation angle. When such a change does take place, it is found that the kinetic Alfvén wave transits to an ion-acoustic mode. For each branch, it is also found that the electric field along the ambient magnetic field is purely transverse.

Physics↗
DOE OSTI2020

Collaborative Research: Natural Organic Matter and Microbial Controls on Mobilization/Immobilization of I and Pu in Soils and Waters Affected by Radionuclide Releases in USA and Japan

In this project, the relationship between natural organic matter (NOM) and two radioactive elements that are relevant to nuclear waste disposal were studied: Plutonium (Pu) and Iodine. The human and environmental risks associated with Pu stem mainly from the very long half-lives of several of its isotopes ( 238 Pu, 88 yr; 239 Pu, 24,100 yr; 240 Pu, 6560 yr) and its radiotoxicity. Understanding Pu biogeochemical behavior in both near-field (>10-11M) and far-field scales (<10-11M) is imperative to the development of approaches for reprocessing Pu, remediation of Pu contamination and accurate assessment of risks posed by disposal practices for Pu-bearing wastes. The environmental mobility of Pu can be affected by redox potential, pH, adsorption, precipitation, complexation, colloid formation, and microbial activity, of which the first characteristic has the most profound influence. Numerous studies have shown high affinity of Pu towards NOM, as well as to mineral phases. NOM is ubiquitous in the environment, e.g., both fulvic and humic acids are able to reduce Pu(V,VI) to Pu(IV) and the redox potential of NOM is positively related to the abundance of phenolic/acidic OH groups. NOM can either facilitate or limit actinide migration, depending on specific biogeochemical conditions including pH, mineral and organic matter characteristics, etc. The other radionuclide of interest is radioiodine ( 129 I). 129I is a major by-product of nuclear fission and of serious concern to the Department of Energy (DOE) as it is among the top risk drivers at existing and potential radiowaste-contaminated sites. The risk of 129 I stems largely from its high bioconcentration factor (90% of the body’s iodine is accumulated in the thyroid), a high inventory at source terms, a very long-half life (16M years), and rapid mobility in the subsurface environment. As a consequence, 129 I has the lowest drinking water standard (1 pCi/L) among all radionuclides in the Federal Register. With a novel and sensitive gas chromatography-mass spectrometry (GC-MS) method developed in our lab, it is possible to quickly and simultaneously determine the distribution of 129 I and stable 127 I forms in environments, as low as 2 pCi/L for 129 I. This method was subsequently validated using accelerator mass spectroscopy, AMS. IO 3 - and organo-I were determined as major species in the groundwater of SRS and the Hanford Site, contrary to thermodynamic predictions that I- should be the dominant species at these sites. Mobility of 129 I was also demonstrated to depend greatly on the I species and its concentration, sediment pH, and redox state, with times to achieve equilibrium taking up to 12 weeks. Along the groundwater pathway in the F-Area of SRS, 129 I- supplied from the seepage basins was transformed to 129 IO 3 - and organo- 129 I with increasing iodine sediment sorption, causing the lower total 127 I and 129 I concentrations along the gradient transect of the waste plume. By contrast, groundwater 129 I concentrations in the wetlands (as high as 1617.3 pCi/L) were greatly elevated with respect to the source term (159.3 pCi/L). While the NOM promoted the uptake of 129 I to the wetland sediment, it also promoted the formation of soluble organic fraction. A small fraction of NOM that is bound to iodine can behave as a mobile organo-I source. Iodide was enzymatically incorporated into NOM, whereas both iodide and iodate were abiotically bound to NOM, under certain conditions. Iodate removal from the mobile aqueous phase can also occur through incorporation into carbonate (e.g., at the Hanford Site, USA). Thus immobilization and re-mobilization of iodine species were influenced by pH, Eh and the presence of NOM and metal oxides, which adds to the complexity of site remediation action. A ground-breaking result was to elucidate the products (i.e. organo-iodine moieties formed via enzymatic and non-enzymatic processes) at the molecular level by nuclear magnetic resonance (NMR) and electrospray ionization Fourier transform ion cyclotron resonance mass spectrometry (ESI-FTICRMS). We found that iodine-NOM interactions may be influenced by NOM hydrophobic aliphatic moieties. From the perspective of ESI-FTICRMS, organo-iodine formulas were ascribed to the groups of unsaturated hydrocarbons, lignins and proteins. Iodate is likely abiotically reduced to reactive iodine species by lignin- and tannin-like compounds or carboxylic-rich alicyclic molecules (CRAM). We also investigated microbial mechanisms in iodine incorporation into NOM. We established that soil bacteria isolated from F-Area of SRS did not accumulate significant amounts of I- (0.2-2%). Intracellular uptake of I- decreases with increasing pH when pH ranged from 4 to 6. In contrast, 44 out of 84 strains isolated from the F-Area of SRS can transform I- to IO 3 - and organo-iodine. In some cases, oxidation was facilitated in the presence of H 2 O 2 . Microbes can also excrete organic acids that enhance I- oxidation by lowering the ambient pH and reacting with H 2 O 2 to form peroxy carboxylic acids. At lower pH values (≤5), H 2 O 2 hydrolysis was the driving force for iodide-oxidation; whereas, at pH ≥ 6, spontaneous decomposition of peroxy carboxylic acids, originating from H 2 O 2 and organic acids were the primary cause of iodide oxidation. Lastly, it was determined that microbial processes involved in Mn (II) are capable of directly oxidizing I- via enzymatic catalysis (i.e., multicopper oxidases), or indirectly through the formation of reactive oxygen species (ROS) and/or biogenic manganese oxides. ROS-mediated oxidation of I- was found to predominate at pH >5, whereas the enzymatic and Mn oxide pathways were more active at pH < 5. Together, this project has resulted in 9 publications in high-impact journals, and the training of 1 Ph.D and 4 undergraduate students.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Mixtures of octanol and an ionic liquid: Structure and transport

Ionic liquids (ILs) with long alkyl substituents are amphiphilic, which leads to a bicontinuous liquid structure. The strongly interacting anionic and cationic head groups form a long range charge network, with the hydrocarbon tails forming a nonpolar domain. Such nonpolar domains have been shown to dissolve a variety of neutral organic solvents. In mixtures of ILs with solvents the neutral organic molecules residing in the nonpolar domains experience different environments and friction from the charged cations and anions. Thus, the neutral molecules diffuse much faster than predicted by hydrodynamic scaling using the average viscosity of the mixture. Here, we report studies on the structure and transport properties of mixtures of 1-octanol with the IL trihexyltetradecylphosphonium bis(trifluoromethylsulfonyl)imide (P 6,6,6,14 + /NTf 2 – ). The majority of the atom fraction in the P 6,6,6,14 + cation comprises four hydrocarbon substituents. The unique amphiphilic nature of ILs with the P 6,6,6,14 + cation makes 1-octanol fully miscible with the IL at ambient temperatures. X-ray scattering experiments show that the IL structure persists in the mixtures for 1-octanol mole fractions as large as x oct = 0.90. The self-diffusion coefficients of the three molecular species in the mixtures were measured by NMR experiments. The self-diffusion of the P 6,6,6,14 + cation is well described by the Stokes–Einstein equation, while the diffusivity of the NTf 2 – anion is slightly lower than the hydrodynamic prediction. The measured diffusivities of octanol in these mixtures are 1.3–4 times higher than the hydrodynamic predictions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗