Search NASA⌕ Search

SEARCH · Search NASA

Results for “passivation layer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Effect of Lithium Doping on MgO Hydroxylation and Carbonation

Recovery of magnesium from brines can potentially be used to source MgO (periclase) as a CO 2 sorbent or for Mg-based cements. However, it is not clear how common impurities in brines, such as lithium, affect the resulting MgO reactivity. Here, to test the effect of lithium incorporation on MgO reactivity for hydration and carbonation, we combined computational simulations with experiments. Experimentally altered (Mg,Li)O with a low dopant concentration (0.012 ± 0.002% w/w Li) was characterized using synchrotron-based X-ray scattering and high-resolution electron microscopy to measure reaction layer formation on (Mg,Li)O. Single-crystal X-ray diffraction analysis of (Mg,Li)O demonstrates that the incorporation of lithium leads to the formation of oxygen vacancies. The presence of vacancies is likely causing faster hydroxylation rates as predicted by ab initio molecular dynamics simulations. However, the faster hydroxylation rates likely lead to faster passivation of the surface because we observe thinner reaction layers on (Mg,Li)O samples both over short time periods (30 days) and over long time periods (28 years). After 28 years, the reaction layer on the (Mg,Li)O sample was less than one-third of the thickness of that of the pure MgO sample. In addition, over 30 days, reaction layers on (Mg,Li)O samples primarily formed at steps rather than on terraces, in contrast to our previous observations on MgO. Based on our results, naturally occurring impurities in MgO modify its reactivity even at very low concentrations and need to be considered for accurate reaction rate prediction for application of MgO as a CO 2 sorbent or in cements.

MgO↗
DOE OSTI2025

Carbonation of MgO Single Crystals: Implications for Direct Air Capture of CO 2

Direct air capture (DAC) may be feasible to remove carbon dioxide (CO 2 ) from the atmosphere at the gigaton scale, holding promise to become a major contributor to climate change mitigation. Mineral looping using magnesium oxide (MgO) is potentially an economical, efficient, and sustainable pathway to gigaton-scale DAC. The hydroxylation and carbonation of MgO determine the efficiency of the looping process, but their rates and mechanisms remain uncertain. Here, in this work, MgO single crystals were reacted in air or CO 2 at varying humidities and characterized by X-ray scattering, microscopy, and vibrational spectroscopy. Results show that the hydroxylation formed a brucite (Mg(OH) 2 )-like layer immediately after crystal cleaving. Concurrently, the carbonation formed hydrated magnesium carbonate phases, including barringtonite (MgCO 3 ·2H 2 O) and nesquehonite (MgCO 3 ·2H 2 O), in the layer. Rapid initial growth of the layer is also manifested in short-range bending/warping of nanocrystallites, resulting in multiple orientations of the same phases on the surface. The layer growth slowed down over time, indicating surface passivation. The formation of barringtonite and nesquehonite with 1:1 CO 3 /Mg ratio indicates an efficient carbonation when compared to other magnesium carbonate phases of lower ratio. Our results are essential for understanding surface passivation mechanisms and tackling the passivation issue of mineral looping DAC technology.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Operational stability of mixed Sn–Pb perovskite solar cells: Mechanisms, mitigation strategies, and perspectives

Mixed Sn–Pb perovskites provide the 1.2–1.3 eV narrow-bandgap absorber needed for high efficiency of all perovskite tandems, but their deployment is limited by operational instability under light. This review synthesizes mechanistic origins and recent mitigation strategies for mixed Sn–Pb perovskite solar cells. The oxidation of Sn 2+ to Sn 4+ , often driven by iodine formation under light and bias, is the primary failure pathway; it creates Sn vacancies, self-doping, and nonradiative loss. Surface/grain-boundary defects, halide migration, reactive oxygen species, and interfacial redox at charge-transport layers, along with hole accumulation from poor band alignment, further accelerate Sn–Pb perovskite degradation. Here we survey recent stability advances across additive chemistry, surface and grain-boundary passivation, buried-interface redesign with modified or alternative hole transport layers, and solvent systems that preserve Sn 2+ and correct Sn–Pb speciation for scalable coating. Together, these recent advances have enabled devices to retain 80%–90% output for hundreds to over a thousand hours. Lastly, we provide our perspectives on further improving the operational stability of Sn–Pb perovskite and solar cells.

14 SOLAR ENERGY↗
DOE OSTI2025

High and Ultra-High Temperature Reaction Kinetics by Single Nanoparticle Mass Spectrometry

Methodology is presented for non-destructive, optically-detected single nanoparticle (NP) mass spectrometry, with the goal of extracting surface reaction kinetics for single NPs at high temperatures. Methods for determining the NP charge, mass, and temperature as a function of time are discussed, and the data are used to extract both the absolute kinetics for mass change, as well as the efficiencies of the surface processes that cause them. Factors that contribute to the uncertainties in absolute and relative mass determination, and in the resulting kinetic parameters, are discussed. The method allows the NP-to-NP variations in initial reactivity to be measured directly, along with the time evolution of reactivity resulting from NP structural/compositional changes that occur under reaction conditions. The strengths and limitations of single nanoparticle mass spectrometry as a high temperature surface kinetics tool are discussed in the context of sublimation and O2 oxidation kinetics experiments for single hafnium (Hf) NPs at temperatures ranging above 2400 K. The Hf oxidation kinetics are compared to analogous oxidation experiments for silicon, graphite, and carbon black NPs. In all four cases, the oxidation chemistry was dominated by processes that result in net mass loss, and the distinct mechanisms responsible are discussed. All four NPs also eventually passivated, i.e., the efficiencies for oxidative etching decreased by at least two orders of magnitude, relative to the initial efficiencies. Furthermore, the passivation mechanisms, which are quite different for carbon, compared to silicon or hafnium, are discussed. Carbon NP passivation is attributed to structural isomerization leading to fully coordinated, fullerene-like NP surfaces, while for silicon and hafnium, passivation results from delayed formation of an oxide layer, triggered by accumulation of oxygen in the NP sub-surface region.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Resolving the Electron Plume within a Scanning Electron Microscope

Scanning electron microscopy (SEM), a century-old technique, is today a ubiquitous method of imaging the surface of nanostructures. However, most SEM detectors simply count the number of secondary electrons from a material of interest, and thereby overlook the rich material information contained within them. Here, by simple modifications to a standard SEM tool, we resolve the momentum and energy information on secondary electrons by directly imaging the electron plume generated by the electron beam of the SEM. Leveraging these spectroscopic imaging capabilities, our technique is able to image lateral electric fields across a prototypical silicon p–n junctions and to distinguish differently doped regions, even when buried beyond depths typically accessible by SEM. Intriguingly, the subsurface sensitivity of this technique reveals unexpectedly strong surface band bending within nominally passivated semiconductor structures, providing useful insights for complex layered component designs, in which interfacial dynamics dictate device operation. Further, these capabilities for noninvasive, multimodal probing of complicated electronic components are crucial in today’s electronic manufacturing but is largely inaccessible even with sophisticated techniques. These results show that seemingly simple SEM can be extended to probe complex and useful material properties.

36 MATERIALS SCIENCE↗
DOE OSTI2024

All-optical phase conjugation using diffractive wavefront processing

Abstract Optical phase conjugation (OPC) is a nonlinear technique used for counteracting wavefront distortions, with applications ranging from imaging to beam focusing. Here, we present a diffractive wavefront processor to approximate all-optical phase conjugation. Leveraging deep learning, a set of diffractive layers was optimized to all-optically process an arbitrary phase-aberrated input field, producing an output field with a phase distribution that is the conjugate of the input wave. We experimentally validated this wavefront processor by 3D-fabricating diffractive layers and performing OPC on phase distortions never seen during training. Employing terahertz radiation, our diffractive processor successfully performed OPC through a shallow volume that axially spans tens of wavelengths. We also created a diffractive phase-conjugate mirror by combining deep learning-optimized diffractive layers with a standard mirror. Given its compact, passive and multi-wavelength nature, this diffractive wavefront processor can be used for various applications, e.g., turbidity suppression and aberration correction across different spectral bands.

42 ENGINEERING↗
DOE OSTI2024

Optimizing the quality factor of InP nanobeam cavities using atomic layer deposition

Photonic crystal nanobeam cavities are valued for their small mode volume, CMOS compatibility, and high coupling efficiency-crucial features for various low-power photonic applications and quantum information processing. However, despite their potential, nanobeam cavities often suffer from low quality factors due to fabrication imperfections that create surface states and optical absorption. In this work, we demonstrate InP nanobeam cavities with up to 140% higher quality factors by applying a coating of Al 2 O 3 via atomic layer deposition to terminate dangling bonds and reduce surface absorption. Additionally, changing the deposition thickness allows precise tuning of the cavity mode wavelength without compromising the quality factor. This Al 2 O 3 atomic layer deposition approach holds great promise for optimizing nanobeam cavities that are well-suited for integration with a wide range of photonic applications.

42 ENGINEERING↗
DOE OSTI2024

Atmospheric Exposure Triggers Light-Induced Degradation in 2D Lead-Halide Perovskites

Quasi-2D perovskites have been pivotal in recent efforts to stabilize perovskite solar cells. Despite the stability boost provided when these materials are introduced in perovskite solar cells, little is known about the intrinsic light and environmental stability of quasi-2D perovskites. In this study, we characterize the photostability of exfoliated quasi-2D perovskite single crystals in air using photoluminescence, infrared, X-ray fluorescence, and energydispersive X-ray spectroscopy. Photoexcitation leads to severe material loss with oxygen as a prerequisite for material breakdown. The effect can be traced to the formation of reactive oxygen species, as demonstrated by increases in the photostability under oxygen-free conditions. We show the effect of combined passivation steps, showcasing the stability enhancement offered by 2D-capping layers in combination with an oxygen-free atmosphere. Our results reveal that the stability of illuminated quasi-2D perovskites depends critically on oxygen exposure, highlighting the importance of oxygen-blocking passivation strategies for stable 2D perovskite-based devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Bulky Cation-Modified Interfaces for Thermally Stable Lead Halide Perovskite Solar Cells

Charged conjugated organic molecules offer promising prospects for reducing nonradiative recombination at interfaces in perovskite solar cells, while protecting the active layer from moisture. However, several studies have shown that the heat induced diffusion of these cations leads to irreversible solar cell degradation. Passivation molecules for perovskite can reconstruct the film surface into lower-dimensional phases when exposed to thermal stress, impeding charge extraction and affecting the photoconversion efficiency (PCE) of devices. In this work, we study how molecular interactions between passivation molecules and 3D CsFAPbI 3 perovskite impact stability and charge extraction at the perovskite/hole transport layer interfaces. Two model π- conjugated molecules are studied: 2-([2,2′-bithiophen]-5-yl)ethan-1-aminium iodide (2TI) and 2-(3‴,4′-dimethyl-[2,2′:5′,2″:5″,2‴- quaterthiophen]-5-yl)ethan-1-ammonium iodide (4TmI). We demonstrate that the speed of surface layer reconstruction under thermal stress can be controlled by the cation size and correlate these structural changes with the solar cell performance and stability. Devices treated with 2TI and 4TmI achieve PCEs over 21% and maintain their performance under thermal stress. Our findings demonstrate that thermal stability in PSCs can be achieved via the design engineering of passivation agents, offering a blueprint for developing next-generation passivation molecules.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Passivated Contacts for Direct Wafer Product (Final Technical Report)

This TCF project developed a thin-oxide (SiO 2 )/polycrystalline silicon (poly-Si) passivated contact solar cell on CubicPV's (formally 1366 Technologies, Inc.) Direct Wafer® Product (DWP) kerfless wafers. The project used two NREL-developed technologies described in U.S. Patent No. 9,911,873, Hydrogenation of Passivated Contacts and U.S. Patent Application Serial No. 15/890,172, Doped Passivated Contacts . The project was motivated by a potential higher efficiency cell (compared to a PERC cell) using passivated contacts on the ultra-low cost kerfless wafers grown using the Direct Wafer process. The hope was to accelerate market adoption of the cell and wafer by delivering the lowest LCOE in the PV industry. The project tested both n-type and p-type SiO 2 /poly-Si passivated contacts grown by thermal oxidation and plasma enhanced chemical vapor deposition (PECVD) of the poly-Si layer on DWP with varying wafer resistivities. Both deposition techniques are industry standards and thus economically viable methods for commercializing the contacts. The results indicated that both n-type and p-type poly-Si passivated contacts can be formed on polycrystalline DWP wafers, but implied open-circuit voltages (i Voc ) were limited to below 0.65 mV (compared with ~ 730 mV on n-Cz wafers). Diffusion of H to the Si/SiO 2 /poly-Si interface was key to obtaining high i Voc values. In this study, H was diffused from a high-temperature SiN x layer deposited over the poly-Si layer during a high-temperature firing step, similar to one used for screen printed metals. The study concluded that poly-Si passivated contacts on DWP wafers passivated the surface of the wafers as well as PERC passivated surfaces, which use a less expensive dielectric layer stack. The project showed that Direct Wafer Product wafers grown by CubicPV could produce high i Voc values (~0.647 mV), which could produce a cell over 20% efficient with proper processing and metallization. These cells, though not economically viable in 2024 as a stand-alone cell, could be integrated with a wide-bandgap top solar cell to form a two-junction tandem cell that could be viable under certain circumstances. This is because the bottom cell of a 30%, two-terminal tandem only needs to be a 20% cell under one-sun conditions. Thus, the DWP could be an ideal low-cost wafer for tandems. The project also revealed that a TOPCon type cell could be formed on a p-type DWP wafer using a P-diffused emitter and a p-type poly-Si contact. In fact, the p-type version of the poly-Si contact out-performed the n-type version for a variety of wafer resistivities, from highly doped to lowly doped. This curiosity requires more work to understand because on Cz wafers, the n-type poly-Si contact is of much higher quality than the p-type version.

14 SOLAR ENERGY↗
DOE OSTI2025

First fluctuation measurements using an Imaging Neutral Particle Analyzer on DIII-D

A recent upgrade to the Imaging Neutral Particle Analyzer (INPA) on DIII-D has allowed for the first fluctuation measurements using an INPA to be taken during a neoclassical tearing mode (NTM). The INPA signal tracked the mode over 150 ms as the mode frequency dropped to zero, capturing both the NTM with poloidal and toroidal mode numbers $m/n=2/1$ and a $3/2$ mode at double the frequency. Analysis shows that the signals originate from charge exchange events near the edge of the plasma, and relative fluctuation amplitudes are greater than 25% for the duration of the NTM. Filtered signals show frequency beating patterns that are phase-space dependent. Simulated signal is dominated by prompt transport from the neutral beams to the INPA sightline, while the contribution from the slowing down distribution is significantly lower. Simulated measurements in the range of pitches that the diagnostic is sensitive to (0.5≤|v∥/v|≤ 0.75) show the signal is dominated by trapped orbits that pass through magnetic islands near the edge of the plasma. Calculations of expected fluctuation levels show that only direct interaction with the NTM can provide the strong relative fluctuation levels seen experimentally. The prompt nature of the orbits and thin radial layer found to contribute to synthetic signals suggest INPA passive data may be used to measure the perturbations of confined orbits on a single pass through a plasma instability.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Structural inversion asymmetry in epitaxial ultrathin films of Bi(111)/InSb(111)B

Bismuth (Bi) films hold potential for spintronic devices due to strong spin-orbit coupling. Understanding the growth, surface states, and interactions with the substrate is key to their functionalization. Large-area high-quality (111) Bi ultrathin films were grown on InSb (111)B substrates by molecular beam epitaxy (MBE). Strong film-substrate interactions epitaxially stabilize the (111) orientation and lead to nonequivalent interface potentials. Analysis of angle-resolved photoemission spectroscopy (ARPES) measurements, employed to characterize the evolution of the surface states with film thickness, indicate a crossing at the $\overline{M}$ point, suggesting a topologically trivial phase in the thin film. In conclusion, the results show the presence of interfacial bonds to the substrate breaks inversion symmetry, preventing the semimetal-to-semiconductor transition predicted for freestanding bismuth layers, highlighting the importance of controlled functionalization and surface passivation of two-dimensional materials.

Inbar, Hadass S. [Univ. of California, Santa Barba↗
DOE OSTI2024

Graphene-transition metal catalyst for hydrogen evolution reaction

Functionalized catalysts for use in a hydrogen evolution reaction (HER) contain nanoparticles containing a transition metal enveloped in layers of graphene, which renders the nanoparticles resistant to passivation while maintaining an optimal ratio of transition metal and transition metal oxide in the nanoparticles. The catalysts can be utilized with anionic exchange polymer membranes for hydrogen production by alkaline water electrolysis.

Mukerjee, Sanjeev↗
DOE OSTI2025

High-Throughput In-Line Deposition of Silicon Oxide for Polycrystalline Silicon Passivating Contacts

Polycrystalline silicon passivating contacts rely on an ultrathin (1–2 nm) silicon oxide layer to minimize recombination at the wafer/oxide interface and regulate dopant diffusion. Traditionally formed by thermal or chemical oxidation, this oxide is herein replaced by silicon oxide deposited via aerosol impact-driven assembly (AIDA), enabling high wafer-per-hour throughput and precise thickness control. In this study, we show that AIDA coatings conformally cover planar or textured substrates and achieve a SiO x /poly-Si(n) structure with an implied open-circuit voltage (iV oc = 726 mV) and contact saturation current density (J 0 = 8.8 fA/cm 2 ). Furthermore, annealing AIDA SiO x films at elevated temperatures desorbs hydroxyl groups while the stoichiometry transitions toward SiO 2 , improving passivation quality. Together, these results highlight AIDA’s potential for scalable, high-throughput manufacturing of advanced passivating contacts, offering a cost-effective alternative to conventional low-pressure chemical vapor deposition and plasma-enhanced chemical vapor deposition-based silicon and oxide processes.

TOPcon↗
DOE OSTI2025

Sensitivities of Large Eddy Simulations of Aerosol Plume Transport and Cloud Response

Abstract Cloud responses to surface‐based sources of aerosol perturbation partially depend on how turbulent transport of the aerosol to cloud base affects the spatial and temporal distribution of aerosol. Here, scenarios of plume injection below a marine stratocumulus cloud are modeled using large eddy simulations coupled to a prognostic bulk aerosol and cloud microphysics scheme. Both passive plumes, consisting of an inert tracer, and active plumes are investigated, where the latter are representative of saltwater droplet plumes such as have been proposed for marine cloud brightening. Passive plume scenarios show higher in‐plume cloud brightness (relative to out‐of‐plume) due to the predominant transport of the passive plume tracer from the near‐surface to the cloud layer within updrafts. These updrafts rise into brighter areas within the cloud deck, even in the absence of an aerosol perturbation associated with an active plume. Comparing albedo at in‐plume to out‐of‐plume locations associates the inert plume with the brightest cloud locations, without any causal effect of the plume on the cloud. Numerical sensitivities are first assessed to establish a suitable model configuration. Then sensitivity to particle injection rate is investigated. Trade‐offs are identified between the number of injected particles and the suppressive effect of droplet evaporation on plume loft and spread. Furthermore, as the near‐field in‐plume brightening effect does not depend significantly on injection rate given a suitable definition of perturbed versus unperturbed regions of the flow, plume area is a key controlling factor on the overall cloud brightening effect of an aerosol perturbation.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Alkaline Zinc Passivation Mechanism is Controlled by Hydroxide Concentration

We studied Zn passivation and oxide growth in Zincate (Zn(OH) 4 2− ) in 4 and 8 M KOH solutions using an electrochemical quartz crystal microbalance (EQCM), building on our initial work at 1 M KOH where passivation was kinetically controlled. A porous passivating oxide spontaneously forms on Zn electrodes when KOH is above 4 M and saturated with zincate. However, passivation does not occur when bulk zincate concentration is decreased, resulting in continual Zn dissolution. EQCM data suggests that the passivation mechanism is strongly affected by pOH. Mass transport and kinetic processes in the 4 M KOH electrolytes couple and govern Zn passivation. At 8 M, KOH concentration shifts passivation to mass transport control. We explain this by the increased solubility of Zn(OH) 3 − with increasing pOH. The variation in the mechanism of passivation implications for how passivation is handled in Zn-alkaline batteries. The importance of controlling the mass transport increases with increased pOH, suggesting that electrode design, additives, and potential flow should be optimized. At lower pOHs, kinetics and mass transport must be balanced to manage passivation effectively. Additionally, the changing nature of the native oxide layer on the surface has implications for the evenness of deposition and dissolution on the Zn electrode.

Wittman, Reed M. [Oak Ridge National Laboratory (O↗
DOE OSTI2024

Single-source pulsed laser-deposited perovskite solar cells with enhanced performance via bulk and 2D passivation

Single-source vapor deposition of halide perovskites has, to date, remained challenging due to the dissimilar volatilities of the precursors, limiting the controlled transfer of multiple elements at once. Here, we demonstrate that pulsed laser deposition (PLD) addresses the rate-control challenges of single-source evaporation, enabling perovskite solar cells with power conversion efficiencies above 19% after passivation. Combining dry mechanochemical synthesis and PLD, we fabricated (Cl-passivated) MA1−xFAxPbI3 films from a single-source target. These films grow on hole-selective self-assembled monolayers, initially forming a thin PbI2-rich layer, which fully converts to perovskite. An oleylammonium iodide (OAmI) post-treatment is then applied to passivate the perovskite’s top surface by forming a 2D perovskite film. Incorporating PbCl2 in the target and applying OAmI-based 2D passivation results in a remarkable 19.7% efficiency for p-i-n perovskite solar cells with enhanced device stability. This highlights the appeal of PLD to fully unlock the potential of single-source vapor-deposited perovskites.

Soto-Montero, Tatiana↗
DOE OSTI2026

Observed Land Surface Influence on Atmospheric Heat and Moisture Profiles During Interstorms

Land-atmospheric (L-A) feedbacks have historically been studied using models whose structure and parameterizations influence outcomes and insights. The representation of L-A feedbacks based on observations alone remains an ongoing challenge for understanding boundary layer development and precipitation. To address this gap, we use ground-based passive remote sensing and in-situ observations to present an analysis of the atmosphere during 103 interstorm soil moisture drydown events spanning nine warm seasons (2016–2024) in the U.S. Southern Great Plains region. By separating events based on local L-A coupling signals and characterizing the profiles of atmospheric heat and moisture to surface energy flux behavior, we investigate the physical mechanisms linking land surface processes to boundary layer development. We find that during interstorm drydowns, the atmospheric column follows a consistent pattern: moisture increases within the boundary layer, peaks near its top, and declines rapidly above, while warming occurs through the depth. Drydowns that shift toward evaporation produce stronger and deeper thermodynamic responses than cases dominated by sensible heating, which are weaker and shallower. Additionally, moisture is accumulated faster within the boundary layer during shorter drydowns, with longer drydowns representing slower, moisture-limited growth. Drydowns with wetter initial soil moisture will sustain stronger moistening within and above the boundary layer, accelerating buoyancy growth and convective potential toward the next storm. These results provide observational evidence linking surface flux evolution to boundary layer thermodynamics and offer a process-level benchmark for evaluating coupled L-A representations in models and demonstrating the influence of soil moisture on short-term weather forecasting skill.

Zhang, M. S. [Massachusetts Inst. of Technology (M↗