Search NASA⌕ Search

SEARCH · Search NASA

Results for “VAPOR PHASE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71

Temperature control of a cryogenic bath

Foreign gas introduced into vapor phase above liquid region cools cryogenic baths. Equipment consists of gas tank and cover of styrofoam. Helium is considered the best choice to produce cooling, though any gas with boiling point lower than that of bath liquid may be used.

Asher, I. M.↗

Some observations on uranium carbide alloy/tungsten compatibility

Chemical compatibility between both pure and thoriated tungsten and uranium carbide alloys was studied at 1800 C for up to 3300 hours. Alloying with zirconium carbide appeared to widen the homogeneity range of uranium carbide, making additional carbon available for reaction with the tungsten. Reaction layers were formed both by vapor phase reaction and by physical contact, producing either or both UWC2 and W2C, dependent upon the phases present in the starting fuel alloy. Formation of UWC2 results in slow growth of the reaction layer with time, while W2C reaction layers grow rapidly, allowing equilibrium to be reached in less than 2500 hours at 1800 C. The presence of a thermal gradient had no effect on the reactions observed nor did the presence of thoria in the tungsten clad.

Phillips, W. M.↗

Development of high temperature gallium phosphide rectifiers

Large area high performance, GaP rectifiers were fabricated by means of Zn diffusion into vapor phase epitaxial GaP. Devices with an active area of 0.01 sq cm typically exhibit forward voltages of 3 volts for a bias current of 1 ampere and have reverse breakdown voltages of 300 volts for temperatures from 27 C to 400 C. Typical device reverse saturation current at a reverse bias of 150 volts is less than 10 to the minus 9th power amp at 27 C and less than 0.000050 amp at 400 C.

Craford, M. G.↗

Equation of state for porous metals under strong shock compression.

An equation of state is developed for metals in the high-pressure high-temperature region that can be extended in a thermodynamically consistent manner to the vapor phase. The constants are obtained from observed thermodynamic properties and are specified for Al, Fe, Cu, Ni, Pb, and W. This equation of state was checked against experimental data by computing the Hugoniot curves for normal and porous samples for cases where experimental data are available. Also, the velocity of sound and release isentropes were computed for various shock conditions.

Naumann, R. J.↗

Some observations on uranium carbide alloy/tungsten compatibility.

Results of chemical compatibility tests between both pure tungsten and thoriated tungsten run at 1800 C for up to 3300 hours with uranium carbide alloys. Alloying with zirconium carbide appeared to widen the homogeneity range of uranium carbide, making additional carbon available for reaction with the tungsten. Reaction layers were formed both by vapor phase reaction and by physical contact, producing either or both UWC2 and W2C, depending upon the phases present in the starting fuel alloy. Formation of UWC2 results in slow growth of the reaction layer with time, while W2C reaction layers grow rapidly, allowing equilibrium to be reached in less than 2500 hours at 1800 C. Neither the presence of a thermal gradient nor the presence of thoria in the tungsten clad affect the reactions observed.

Phillips, W. M.↗

Infrared spectra of group III A metal oxides

The measurement of infrared frequencies of metal-oxygen species which could be formed in the matrix and to investigate with an oxygen-18 enrichment study the controversy on the vibrational assignments for the suboxide. Several new molecules, Al3O2, Ga3O, In3O, In4O2, IntaO, IntaO2, and In2WO4, were found by mass spectrometric sampling to exist in extremely minor concentrations in the vapor phase. The latter three species were formed by reaction with the crucible materials and were unimportant for an infrared analysis. The infrared spectroscopic measurements were obtained by the matrix isolation technique of molecular beam sampling. The MO2 species were formed by direct reaction between metal and O2 in the matrix. A C2v structure and an O-M-O bond angle near 40 deg was favored for these molecules by analogy with a similar investigation of the alkali metals. The vibrational frequencies which were determined are given.

Lynch, D. A., Jr.↗

Barium release system

A chemical system is described for releasing a good yield of free barium neutral atoms and barium ions in the upper atmosphere and interplanetary space for the study of the geophysical properties of the medium. The barium is released in the vapor phase so that it can be ionized by solar radiation and also be excited to emit resonance radiation in the visible range. The ionized luminous cloud of barium becomes a visible indication of magnetic and electrical characteristics in space and allows determination of these properties over relatively large areas at a given time.

Lewis, B. W.↗

Poly/diphenylsiloxy/arylazines. I - Synthesis and characterization

A detailed description is presented for the synthesis of poly(diphenylsiloxy)arylazines by the melt polymerization of hydroxyarylazines and bis(anilino)diphenylsilane. The resulting polymers have been characterized by elemental analysis, gel-permeation chromatography, vapor-phase osmometry, and UV-VIS-IR optical spectroscopy.

Goldsberry, R. E.↗

Detection of dilute organic acids in water by inelastic tunneling spectroscopy

Study of inelastic electron tunneling spectroscopy (IETS) spectra obtained from junctions exposed to dilute solutions of organic molecules in both liquid and vapor phases. The results indicate that it is possible in principle to detect the presence and to measure the concentration of at least some organic molecules in dilute aqueous solution by means of the IETS technique. Some fine points pertaining to the application of this technique are discussed, and it is pointed out that through appropriate refinements IETS may become a valuable tool for analytical water chemistry.

Skarlatos, Y.↗

The study of single crystals for space processing and the effect of zero gravity

A study was undertaken to analyze different growth techniques affected by a space environment. Literature on crystal growth from melt, vapor phase and float zone was reviewed and the physical phenomena important for crystal growth in zero-gravity environment was analyzed. Recommendations for potential areas of crystal growth feasible for space missions are presented and a bibliography of articles in the area of crystal growth in general is listed.

Lal, R. B.↗

Studies related to the surfaces of the moon and planets

A variety of glasses of lunar composition were prepared with different amounts of Fe and Ti under both reducing and oxidizing conditions, and also by sputter-deposition and thermal evaporation and condensation. These materials were analyzed by wet chemical, electron microprobe, ESR, Mossbauer and magnetic methods. The effects of darkening processes on surface soils of airless bodies are discussed along with the effects of vapor phase deposition processes on the optical, chemical, and magnetic properties of the lunar regolith.

Hapke, B.↗

A scanning electron microscope study of olivine crystal surfaces

SEM photographs were taken of euhedral olivine grains from the Murchison C2 chondrite and several terrestrial and lunar occurrences. In general, the crystal faces of the meteorite grains are rough and uneven, with irregular growth patterns. They are very similar to crystal faces on terrestrial olivine grains that formed by sublimation from a vapor phase. They are very different from the relatively smooth and featureless surfaces of magmatic olivine crystals that precipitated from igneous melts. Qualitatively, the surface morphology of the crystal supports the contention that many euhedral crystals of olivine in C2 meteorites condensed from a gas phase.

Olsen, E. J.↗

Detection of water vapor on Jupiter

High-altitude (12.4 km) spectroscopic observations of Jupiter at 5 microns from the NASA 91.5 cm airborne infrared telescope have revealed 14 absorptions assigned to the rotation-vibration spectrum of water vapor. Preliminary analysis indicates a mixing ratio about 1 millionth for the vapor phase of water. Estimates of temperature (greater than about 300 K) and pressure (less than 20 atm) suggest observation of water deep in Jupiter's hot spots responsible for its 5 micron flux. Model-atmosphere calculations based on radiative-transfer theory may change these initial estimates and provide a better physical picture of Jupiter's atmosphere below the visible cloud tops.

Larson, H. P.↗

Composition of the gases associated with the magmas that produced rocks 15016 and 15065

Gases may be trapped in crystallizing minerals in many different ways but gas analyses can provide geologically meaningful information only if the gases can be related to their specific locations in the host mineral. The gases trapped in glass inclusions can be representative samples of the gases associated with the magma adjacent to the mineral at the time it crystallized. Analyses of the gases in glass inclusions in gabbro 15065,44 and basalt 15016,48 show that in both cases the gases in the parent magma started with a composition close to 46% oxygen, 42% carbon and 12% hydrogen and became more water-rich as crystallization progressed. This enrichment is probably due to a selective removal of the less soluble carbon compounds into the vapor phase. Some of the volatile components may react with the rock as temperature falls to give siderite and possibly hydrous phases.

Barker, C.↗

Low cost AMOS solar cell development

Recent developments at JPL have demonstrated that high conversion efficiencies are found with GaAs metal semiconductor solar cells when a particular heat treatment processing step is used to introduce an interfacial layer between the metal and the semiconductor. The new cell, called AMOS (Antireflection-Coated Metal-Oxide-Semiconductor), has open circuit voltages of 0.68-0.72 volts and efficiencies of 15% under terrestrial sunlight, as compared to values of 0.45-0.48 volts and 10%, respectively, for similar cells without an interfacial layer. Potentially higher efficiencies are feasible as further improvements are made in optimizing the interfacial layer effect and in increasing the blue response of the cells. A thin film AMOS cell is proposed that uses a thin recrystallized germanium (Ge) layer between a low cost metal substrate and the vapor phase epitaxially (VPE)-grown GaAs.

Stirn, R. J.↗

Detection and mapping of mineralized areas in the Cortez-Uinta Belt, Utah-Nevada, using computer-enhanced ERTS imagery

The author has identified the following significant results. Preliminary analysis indicates that mineralogical differences between altered rocks and most unaltered rocks in south-central Nevada cause visible and near infrared spectral reflectance differences, which can be used to discriminate these broad categories of rocks in multispectral images. The most important mineralogical differences are the increased abundance of goethite, hematite, and jarosite, and the presence of alunite, montmorillonite, and kaolinite in the altered rock. The technique to enhance subtle spectral differences combines ratioing of the MSS bands and contrast stretching. The stretched ratio values are used to produce black and white images that depict materials according to spectral reflectance; rationing minimizes the influence of topography and overall albedo on the grouping of spectrally similar materials. Field evaluation of color-ratio composite shows that, excluding alluvial areas, approximately 80 percent of the green and brown color patterns are related to hydrothermal alternation. The remaining 20 percent consists mainly of pink hematitic crystallized tuff, a result of vapor phase crystallization, and of tan and red ferruginous shale and siltstone.

Rowan, L. C.↗

Research and development for improved lead-salt diode lasers

A substantial increase in output power levels for lead-salt diode lasers, through the development of improved fabrication methods, as demonstrated. The goal of 1 mW of CW, single-mode, single-ended power output, was achieved, with exceptional devices exhibiting values greater than 8 mW. It was found that the current tuning rate could be controlled by adjusting the p-n junction depth, allowing the tuning rate to be optimized for particular applications. An unexpected phenomenon was encountered when crystal composition was observed to be significantly altered by annealing at temperatures as low as 600 C; the composition was changed by transport of material through the vapor phase. This effect caused problems in obtaining diode lasers with the desired operating characteristics. It was discovered that the present packaging method introduces gross damaging effects in the laser crystal through pressure applied by the C-bend.

Butler, J. F.↗