Search NASA⌕ Search

SEARCH · Search NASA

Results for “Memory device”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72

Quantum-authenticated clock signal

The present disclosure is directed to a system and method of distributing time information to enable synchronization in an authenticated manner via a quantum channel. A source device may transmit a timing signal, T on a communication channel from the source device to a receiver device. The timing signal T may be include a time or times stored in memory or calculated using a previously agreed upon formula. The method may include transmitting a quantum system Q from the source device to the receiver device. The quantum system may be prepared in a randomly chosen state and may be measured by the receiver device in a randomly chosen measurement basis.

47 OTHER INSTRUMENTATION↗

Quasi-perfect FIFO: Synchronous or asynchronous with application in controller design for the UNICON laser memory

The first-in-first-out memory buffer (FIFO), is an elastic digital memory whose main application is in data buffering between devices operating at different rates. Data written into the top is moved autonomously down toward the bottom of the FIFO to the lowest unoccupied location, and data read from the bottom of the FIFO will cause data from the top to move autonomously down toward the bottom. The FIFO is available in MOS LSI asynchronous form with data rate in the 1 MHz region. The FIFO described yields a simple high-speed iterative implementation, either synchronous of asynchronous. Because of this simple iterative structure, the FIFO is expandable in both number of words and bits per word, and it is attractive from the viewpoint of integrated-circuit production. For the synchronous FIFO, a model was built and successfully used in the controller for the UNICON laser memory. For the asynchronous FIFO, a model was built and also successfully used in a high-performance magnetic tape controller.

Lim, R. S.↗

AI-Enhanced Co-Design for Next-Generation Microelectronics: Innovating Innovation (Workshop Report)

The Artificial Intelligence Enhanced Co-Design for Next Generation Microelectronics virtual workshop was held April 4-5, 2023, and attended by subject matter experts from universities, industry, and national laboratories. This was the third in a series of workshops to motivate the research community to identify and address major challenges facing microelectronics research and production. The 2023 workshop focused on a set of topics from materials to computing algorithms, and included discussions on relevant federal legislation and such as the Creating Helpful Incentives to Produce Semiconductors and Science Act (CHIPS Act) which was signed into law in the summer of 2022. Talks at the workshop included edge computing in radiation environments, new materials for neuromorphic computing, advanced packaging for microelectronics, and new AI techniques. We also received project updates from several of the Department of Energy (DOE) microelectronics co-design projects funded in the fall of 2021, and from three of the Energy Frontier Research Centers (EFRCs) that had been funded in the fall of 2022. The workshop also conducted a set of breakout discussions around the five principal research directions (PRDs) from the 2018 Department of Energy workshop report: 1) define innovative material, device, and architecture requirements driven by applications, algorithms, and software; 2) revolutionize memory and data storage; 3) re-imagine information flow unconstrained by interconnects; 4) redefine computing by leveraging unexploited physical phenomena; 5) reinvent the electricity grid through new materials, devices, and architectures. We tasked each breakout group to consider one primary PRD (and other PRDs as relevant topics arose during discussions) and to address questions such as whether the research community has embraced co-design as a methodology and whether new developments at any level of innovation from materials to programming models requires the research community to reevaluate the PRDs developed back in 2018.

97 MATHEMATICS AND COMPUTING↗

IoT Firmware Emulation and Its Security Application in Fuzzing: A Critical Revisit

As IoT devices with microcontroller (MCU)-based firmware become more common in our lives, memory corruption vulnerabilities in their firmware are increasingly targeted by adversaries. Fuzzing is a powerful method for detecting these vulnerabilities, but it poses unique challenges when applied to IoT devices. Direct fuzzing on these devices is inefficient, and recent efforts have shifted towards creating emulation environments for dynamic firmware testing. However, unlike traditional software, firmware interactions with peripherals that are significantly more diverse presents new challenges for achieving scalable full-system emulation and effective fuzzing. This paper reviews 27 state-of-the-art works in MCU-based firmware emulation and its applications in fuzzing. Instead of classifying existing techniques based on their capabilities and features, we first identify the fundamental challenges faced by firmware emulation and fuzzing. We then revisit recent studies, organizing them according to the specific challenges they address, and discussing how each specific challenge is addressed. We compare the emulation fidelity and bug detection capabilities of various techniques to clearly demonstrate their strengths and weaknesses, aiding users in selecting or combining tools to meet their needs. Finally, we highlight the remaining technical gaps and point out important future research directions in firmware emulation and fuzzing.

Zhou, Wei (ORCID:0000000178340839)↗

Macrospin modeling of sub-ns pulse switching of perpendicularly magnetized free layer via spin-orbit torques for cryogenic memory applications

We model, using the macrospin approximation, the magnetic reversal of a perpendicularly magnetized nanostructured free layer formed on a normal, heavy-metal nanostrip, subjected to spin-orbit torques (SOTs) generated by short (≤0.5 ns) current pulses applied to the nanostrip, to examine the potential for SOT-based fast, efficient cryogenic memory. Due to thermal fluctuations, if solely an anti-damping torque is applied, then, for a device with sufficiently low anisotropy (H{sub anis}{sup 0} ∼ 1 kOe) suitable for application in cryogenic memory, a high magnetic damping parameter (α∼0.1−0.2) is required for reliable switching over a significant variation of pulse current. The additional presence of a substantial field-like torque improves switching reliability even for low damping (α≤0.03).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Breaking the Current‐Retention Dilemma in Cation‐Based Resistive Switching Devices Utilizing Graphene with Controlled Defects

Abstract Cation‐based resistive switching (RS) devices, dominated by conductive filaments (CF) formation/dissolution, are widely considered for the ultrahigh density nonvolatile memory application. However, the current‐retention dilemma that the CF stability deteriorates greatly with decreasing compliance current makes it hard to decrease operating current for memory application and increase driving current for selector application. By centralizing/decentralizing the CF distribution, this current‐retention dilemma of cation‐based RS devices is broken for the first time. Utilizing the graphene impermeability, the cation injecting path to the RS layer can be well modulated by structure‐defective graphene, leading to control of the CF quantity and size. By graphene defect engineering, a low operating current (≈1 µA) memory and a high driving current (≈1 mA) selector are successfully realized in the same material system. Based on systematically materials analysis, the diameter of CF, modulated by graphene defect size, is the major factor for CF stability. Breakthrough in addressing the current‐retention dilemma will instruct the future implementation of high‐density 3D integration of RS memory immune to crosstalk issues.

Zhao, Xiaolong↗

Direct measurement of reduced exchange stiffness and its impact on magnetic vortex behavior in PyGd alloys

Thin films composed of sputtered transition metal/rare earth (TM/RE) ferrimagnets have emerged as promising building blocks for future spintronic devices, offering tunable magnetic properties critical for data storage, memory, and logic applications. However, understanding how the combination of TM and RE elements influences effective magnetic properties, such as exchange stiffness (Aex), remains challenging. Magnetic vortices provide a versatile tool for probing these properties in thin film systems. By combining magnetic imaging via soft x-ray microscopy and micromagnetic modeling, we quantify the effective exchange stiffness in PyGd ferrimagnetic disks with varying Gd concentrations. Our results indicate a reduction in Aex to below 3 pJ/m for a 20% Gd concentration when compared to reference Py, and values below 2 pJ/m for 30% Gd, reflecting weak Ni–Gd exchange coupling. These findings highlight the critical role of rare earth content in tuning the exchange stiffness. The reduced exchange stiffness facilitates a linear field response of the magnetization up to the edge of the disk, as well as significant deformations in the vortex core itself when compared to films with larger Aex. Our results are in line with, albeit lower than, recent measurements of the exchange stiffness in intermixed PyGd. This reduced exchange stiffness has implications for the development of spintronic devices based on ferrimagnetic skyrmions.

Jacob, Liyan↗

A Normal Incidence X-ray Telescope (NIXT) sounding rocket payload

Work on the High Resolution X-ray (HRX) Detector Program is described. In the laboratory and flight programs, multiple copies of a general purpose set of electronics which control the camera, signal processing and data acquisition, were constructed. A typical system consists of a phosphor convertor, image intensifier, a fiber optics coupler, a charge coupled device (CCD) readout, and a set of camera, signal processing and memory electronics. An initial rocket detector prototype camera was tested in flight and performed perfectly. An advanced prototype detector system was incorporated on another rocket flight, in which a high resolution heterojunction vidicon tube was used as the readout device for the H(alpha) telescope. The camera electronics for this tube were built in-house and included in the flight electronics. Performance of this detector system was 100 percent satisfactory. The laboratory X-ray system for operation on the ground is also described.

Golub, Leon↗

Unexpected Giant Microwave Conductivity in a Nominally Silent BiFeO 3 Domain Wall

Nanoelectronic devices based on ferroelectric domain walls (DWs), such as memories, transistors, and rectifiers, have been shown in recent years. Practical high-speed electronics, on the other hand, usually demand operation frequencies in the gigahertz (GHz) regime, where the effect of dipolar oscillation is important. Herein, an unexpected giant GHz conductivity on the order of 10 3 S m -1 is observed in certain BiFeO 3 DWs, which is about 100 000 times greater than the carrier-induced direct current (dc) conductivity of the same walls. Surprisingly, the nominal configuration of the DWs precludes the alternating current (ac) conduction under an excitation electric field perpendicular to the surface. Theoretical analysis reflects that the inclined DWs are stressed asymmetrically near the film surface, whereas the vertical walls in a control sample are not. The resultant imbalanced polarization profile can then couple to the out-of-plane microwave fields and induce power dissipation, which is confirmed by the phase-field modeling. Since the contributions from mobile-carrier conduction and bound-charge oscillation to the ac conductivity are equivalent in a microwave circuit, the research on local structural dynamics may open a new avenue to implement DW nano-devices for radio-frequency applications.

36 MATERIALS SCIENCE↗

MT29F512G08AUCBBH8-6IT:B NAND Flash Memory Total Ionizing Dose Test Report

The purpose of this test was to characterize the Micron 512 GB NAND (MT29F512G08AUCBBH8-6IT:B) flash memory parameter degradation for total dose response. In the test, the device was exposed to high dose rate (HDR) irradiations using gamma radiation. Device parameters such as leakage currents, quantity of upset bits and overall chip and die health were investigated.

TID↗

The future scientific CCD

Since the first introduction of charge-coupled devices (CCDs) in 1970, CCDs have been considered for applications related to memories, logic circuits, and the detection of visible radiation. It is pointed out, however, that the mass market orientation of CCD development has left largely untapped the enormous potential of these devices for advanced scientific instrumentation. The present paper has, therefore, the objective to introduce the CCD characteristics to the scientific community, taking into account prospects for further improvement. Attention is given to evaluation criteria, a summary of current CCDs, CCD performance characteristics, absolute calibration tools, quantum efficiency, aspects of charge collection, charge transfer efficiency, read noise, and predictions regarding the characteristics of the next generation of silicon scientific CCD imagers.

Janesick, J. R.↗

Experimental Characterization of OpenMP Offloading Memory Operations and Unified Shared Memory Support

The OpenMP specification recently introduced support for unified shared memory, allowing implementation to leverage underlying system software to provide a simpler GPU offloading model where explicit mapping of variables is optional. Support for this feature is becoming more available in different OpenMP implementations on several hardware platforms. A deeper understanding of the different implementation’s execution profile and performance is crucial for applications as they consider the performance portability implications of adopting a unified memory offloading programming style. This work introduces a benchmark tool to characterize unified memory support in several OepnMP compilers and runtimes, with emphasis on identifying discrepancies between different OpenMP implementations as to how they various memory allocation strategies interact with unified shared memory. The benchmark tool is used to characterize OpenMP compilers on three leading High Performance Computing platforms supporting different CPU and device architectures. The benchmark tool is used to assess the impact of enabling unified shared memory on the performance of memory-bound code, highlighting implementation differences that should be accounted for when applications consider performance portability across platforms and compilers.

Elwasif, Wael↗

Multiferroic oxide thin films and heterostructures

Multiferroic materials promise a tantalizing perspective of novel applications in next-generation electronic, memory, and energy harvesting technologies, and at the same time they also represent a grand scientific challenge on understanding complex solid state systems with strong correlations between multiple degrees of freedom. In this review, we highlight the opportunities and obstacles in growing multiferroic thin films with chemical and structural integrity and integrating them in functional devices. Besides the magnetoelectric effect, multiferroics exhibit excellent resistant switching and photovoltaic properties, and there are plenty opportunities for them to integrate with other ferromagnetic and superconducting materials. The challenges include, but not limited, defect-related leakage in thin films, weak magnetism, and poor control on interface coupling. Although our focuses are Bi-based perovskites and rare earth manganites, the insights are also applicable to other multiferroic materials. We will also review some examples of multiferroic applications in spintronics, memory, and photovoltaic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Timescale Separation of Positive and Negative Signaling Creates History-Dependent Responses to IgE Receptor Stimulation

The high-affinity receptor for IgE expressed on the surface of mast cells and basophils interacts with antigens, via bound IgE antibody, and triggers secretion of inflammatory mediators that contribute to allergic reactions. To understand how past inputs (memory) influence future inflammatory responses in mast cells, a microfluidic device was used to precisely control exposure of cells to alternating stimulatory and non-stimulatory inputs. We determined that the response to subsequent stimulation depends on the interval of signaling quiescence. For shorter intervals of signaling quiescence, the second response is blunted relative to the first response, whereas longer intervals of quiescence induce an enhanced second response. Through an iterative process of computational modeling and experimental tests, we found that these memory-like phenomena arise from a confluence of rapid, short-lived positive signals driven by the protein tyrosine kinase Syk; slow, long-lived negative signals driven by the lipid phosphatase Ship1; and slower degradation of Ship1 co-factors. This work advances our understanding of mast cell signaling and represents a generalizable approach for investigating the dynamics of signaling systems.

59 BASIC BIOLOGICAL SCIENCES↗

Nanogranular SiO{sub 2} proton gated silicon layer transistor mimicking biological synapses

Silicon on insulator (SOI)-based transistors gated by nanogranular SiO{sub 2} proton conducting electrolytes were fabricated to mimic synapse behaviors. This SOI-based device has both top proton gate and bottom buried oxide gate. Electrical transfer properties of top proton gate show hysteresis curves different from those of bottom gate, and therefore, excitatory post-synaptic current and paired pulse facilitation (PPF) behavior of biological synapses are mimicked. Moreover, we noticed that PPF index can be effectively tuned by the spike interval applied on the top proton gate. Synaptic behaviors and functions, like short-term memory, and its properties are also experimentally demonstrated in our device. Such SOI-based electronic synapses are promising for building neuromorphic systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Variation Tolerant and Energy-Efficient Charge Domain Compute-in-Memory Array with Binary and Multi-Level Cell Ferroelectric FET

Here, in this work, we present a variation-tolerant and energy-efficient charge-domain Ferroelectric FET (FeFET) based Compute-in-Memory (CiM) array design that is compatible with both binary and multi-level cell memory sensing. We demonstrate that: 1) by exploiting FeFET as a nonvolatile switch, its high ON/OFF ratio in the subthreshold region can suppress the error introduced by the inaccurate ON state conductance, thus realizing robust CiM operations, unlike the current-domain CiM design where the computation results is highly sensitive to the device conductance variation; 2) by leveraging a dense dynamic random access memory (DRAM)-like 1FeFET1C cell structure, the proposed design benefits from the existing high density DRAM establishment while also significantly relaxing the capacitor retention and transistor leakage requirement; 3) the charge-domain CiM supports both binary FeFET with minimum overhead and MLC FeFET with tolerable latency for MLC state sensing, whose efficacy is validated experimentally on both cell-level and array-level; 4) the proposed CiM shows much better device variation resilience than conventional current-domain CiM, and also improves inference accuracy. Macro-level evaluation results demonstrate significantly higher energy efficiency and area efficiency compared to prior CiM works.

Duan, Jiahui [University of Notre Dame, IN (United↗

Memory node controller

A memory node controller for a node of a data processing network, the network including at least one computing device and at least one data resource, each data resource addressed by a physical address. The node is configured to couple the at least one computing device with the at least one data resource. Elements of the data processing network are addressed via a system address space. The memory node controller includes a first interface to the at least one data resource, a second interface to the at least one computing device, and a system to physical address translator cache configured to translate a system address in the system address space to a physical address in the physical address space of the at least one data resource.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

Analysis of the energy distribution of interface traps related to tunnel oxide degradation using charge pumping techniques for 3D NAND flash applications

Graphical abstract: The degradation tendency extracted by CP technique was almost the same in both the bulk-type and TFT-type cells. - Highlights: • D{sub it} is directly investigated from bulk-type and TFT-type CTF memory. • Charge pumping technique was employed to analyze the D{sub it} information. • To apply the CP technique to monitor the reliability of the 3D NAND flash. - Abstract: The energy distribution and density of interface traps (D{sub it}) are directly investigated from bulk-type and thin-film transistor (TFT)-type charge trap flash memory cells with tunnel oxide degradation, under program/erase (P/E) cycling using a charge pumping (CP) technique, in view of application in a 3-demension stackable NAND flash memory cell. After P/E cycling in bulk-type devices, the interface trap density gradually increased from 1.55 × 10{sup 12} cm{sup −2} eV{sup −1} to 3.66 × 10{sup 13} cm{sup −2} eV{sup −1} due to tunnel oxide damage, which was consistent with the subthreshold swing and transconductance degradation after P/E cycling. Its distribution moved toward shallow energy levels with increasing cycling numbers, which coincided with the decay rate degradation with short-term retention time. The tendency extracted with the CP technique for D{sub it} of the TFT-type cells was similar to those of bulk-type cells.

36 MATERIALS SCIENCE↗