Search NASA⌕ Search

SEARCH · Search NASA

Results for “electronic resistance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

A Printed Microscopic Universal Gradient Interface for Super Stretchable Strain‐Insensitive Bioelectronics

Abstract Stretchable electronics capable of conforming to nonplanar and dynamic human body surfaces are central for creating implantable and on‐skin devices for high‐fidelity monitoring of diverse physiological signals. While various strategies have been developed to produce stretchable devices, the signals collected from such devices are often highly sensitive to local strain, resulting in inevitable convolution with surface strain‐induced motion artifacts that are difficult to distinguish from intrinsic physiological signals. Here all‐printed super stretchable strain‐insensitive bioelectronics using a unique universal gradient interface (UGI) are reported to bridge the gap between soft biomaterials and stiff electronic materials. Leveraging a versatile aerosol‐based multi‐materials printing technique that allows precise spatial control over the local stiffnesses with submicron resolution, the UGI enables strain‐insensitive electronic devices with negligible resistivity changes under a 180% uniaxial stretch ratio. Various stretchable devices are directly printed on the UGI for on‐skin health monitoring with high signal quality and near‐perfect immunity to motion artifacts, including semiconductor‐based photodetectors for sensing blood oxygen saturation levels and metal‐based temperature sensors. The concept in this work will significantly simplify the fabrication and accelerate the development of a broad range of wearable and implantable bioelectronics for real‐time health monitoring and personalized therapeutics.

Song, Kaidong [Department of Aerospace and Mechani↗
DOE OSTI2022

Stabilization of Ultrasmall Platinum Nanoparticles by Nitrogen-Doped Carbon: Implications for Catalysis and Electrocatalysis

Heterogeneous materials comprising platinum nanoparticles on carbon supports have numerous applications including fuel cell electrodes and heterogeneous catalysts. The effective application of these materials for fuel cells and catalysis will be greatly advanced by the ability to control the oxidation and sintering of the nanoparticles by modifications of the carbon support. One attempt of such control has been doping carbon supports with nitrogen. Here, in this work, a cutting-edge, high-sensitivity, in situ XRD instrument, which allows observation of ultrasmall Pt nanoparticles, has been combined with in situ XPS to provide unprecedented clarity in the characterization of supported Pt nanoparticles in oxidizing and high-temperature environments. On a nitrogen-doped carbon support derived from poly-phenylporphyrin, Pt nanoparticles show increased stability to oxidation and thermal sintering. The enhanced Pt–support interaction arising from the N dopant versus the N-free carbon is manifested by (1) decreased initial Pt particle sizes, (2) small particle size at higher surface densities, (3) increased resistance of Pt nanoparticles to oxidation, (4) increased electron binding energy of Pt0, and (5) increased resistance of Pt nanoparticles to sintering. It is expected that the higher stability of Pt on NC will be manifested in higher activity in fuel cells and high-temperature catalytic reactions.

catalytic reactions↗
DOE OSTI2021

Resonance from antiferromagnetic spin fluctuations for superconductivity in UTe 2

We report superconductivity originates from the formation of bound (Cooper) pairs of electrons that can move through the lattice without resistance below the superconducting transition temperature $T_c$. Electron Cooper pairs in most superconductors form anti-parallel spin singlets with total spin S = 0, although they can also form parallel spin-triplet Cooper pairs with S = 1 and an odd parity wavefunction. Spin-triplet pairing is important because it can host topological states and Majorana fermions relevant for quantum computation. Because spin-triplet pairing is usually mediated by ferromagnetic (FM) spin fluctuations3, uranium-based materials near an FM instability are considered to be ideal candidates for realizing spin-triplet superconductivity. Indeed, UTe 2 , which has a $T_c$ ≈ 1.6 K, has been identified as a candidate for a chiral spin-triplet topological superconductor near an FM instability, although it also has antiferromagnetic (AF) spin fluctuations. Here we use inelastic neutron scattering (INS) to show that superconductivity in UTe 2 is coupled to a sharp magnetic excitation, termed resonance, at the Brillouin zone boundary near AF order. Because the resonance has only been found in spin-singlet unconventional superconductors near an AF instability, its observation in UTe 2 suggests that AF spin fluctuations may also induce spin-triplet pairing or that electron pairing in UTe 2 has a spin-singlet component.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Extended quantum anomalous Hall states in graphene/hBN moiré superlattices

Electrons in topological flat bands can form new topological states driven by correlation effects. The pentalayer rhombohedral graphene/hexagonal boron nitride (hBN) moiré superlattice was shown to host fractional quantum anomalous Hall effect (FQAHE) at approximately 400 mK, triggering discussions around the underlying mechanism and role of moiré effects. In particular, new electron crystal states with non-trivial topology have been proposed. Here, in this paper, we report electrical transport measurements in rhombohedral pentalayer and tetralayer graphene/hBN moiré superlattices at electronic temperatures down to below 40 mK. We observed two more fractional quantum anomalous Hall (FQAH) states and smaller R xx values in pentalayer devices than those previously reported. In the new tetralayer device, we observed FQAHE at moiré filling factors v = 3/5 and 2/3. With a small current at the base temperature, we observed a new extended quantum anomalous Hall (EQAH) state and magnetic hysteresis, where R xy = h/e 2 and vanishing R xx spans a wide range of v from 0.5 to 1.3. At increased temperature or current, EQAH states disappear and partially transition into the FQAH liquid. Furthermore, we observed displacement field-induced quantum phase transitions from the EQAH states to the Fermi liquid, FQAH liquid and the likely composite Fermi liquid. Our observations established a new topological phase of electrons with quantized Hall resistance at zero magnetic field and enriched the emergent quantum phenomena in materials with topological flat bands.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Atomic structure of an FeCrMoCBY metallic glass revealed by high energy x-ray diffraction

Amorphous bulk metallic glasses with the composition Fe 48 Cr 15 Mo 14 C 15 B 6 Y 2 have been of interest due to their special mechanical and electronic properties, including corrosion resistance, high yield-strength, large elasticity, catalytic performance, and soft ferromagnetism. Here, we apply a reverse Monte Carlo technique to unravel the atomic structure of these glasses. The pair-distribution functions for various atomic pairs are computed based on the high-energy x-ray diffraction data we have taken from an amorphous sample. Monte Carlo cycles are used to move the atomic positions until the model reproduces the experimental pair-distribution function. The resulting fitted model is consistent with our ab initio simulations of the metallic glass. Our study contributes to the understanding of functional properties of Fe-based bulk metallic glasses driven by disorder effects.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Simulation study of particle transport by weakly coherent mode in the Alcator C-Mod tokamak

A simulation study has been conducted of the physical mechanisms behind the weakly coherent mode (WCM) and its produced particle transport in the I-mode edge plasmas by using the BOUT++ code. The WCM is identified in our simulations by its poloidal and radial distributions as well as its frequency and wavenumber spectra. Its produced radial particle flux is calculated and compared with the experimental value. The good agreement indicates that the WCM is an important particle transport channel in the I-mode pedestal. It is found that the WCM can transport particles across the strong outer shear layer of the Er well established in the formation of I-mode, based on which a possible explanation is provided why I-mode does not feature a density pedestal. The key point lies in the change of the cross-phase between the electric potential and density fluctuations induced by the E × B Doppler shift. In the strong shear layer, although the electric potential fluctuation is significantly suppressed, the cross-phase is close to π/2, resulting in a strong drive of the density fluctuation and particle transport. To identify the physical nature of the WCM, a linear dispersion relation for drift Alfvén modes is derived in the slab geometry. A drift Alfvén wave instability is found to have similar dependence to the simulated linear instability behind the WCM on the resistivity and the parallel electron pressure gradient and thermal force terms in the parallel Ohm's law.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Isotropically conducting (hidden) quantum Hall stripe phases in a two-dimensional electron gas

Quantum Hall stripe (QHS) phases, predicted by the Hartree-Fock theory, are manifested in GaAs-based two-dimensional electron gases as giant resistance anisotropies. In this communication, we predict a “hidden” QHS phase which exhibits isotropic resistivity whose value, determined by the density of states of QHS, is independent of the Landau index $N$ and is inversely proportional to the Drude conductivity at zero magnetic field. At high enough $N$, this phase yields to an Ando-Unemura-Coleridge-Zawadski-Sachrajda phase in which the resistivity is proportional to 1/$N$ and to the ratio of quantum and transport lifetimes. Experimental observation of this border should allow one to find the quantum relaxation time.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Magnetic order in the S eff =1/2 triangular-lattice compound NdCd 3 ⁢P 3

Here, we present and characterize a new member of the R⁢Cd 3 ⁢P 3 (R=rare earth) family of materials, NdCd 3 ⁢P 3 , which possesses Nd 3+ cations arranged on well-separated triangular lattice layers. Magnetic susceptibility and heat capacity measurements demonstrate a likely S eff =1/2 ground state, and also reveal the formation of long-range antiferromagnetic order at T N =0.34K. Via measurements of magnetization, heat capacity, and electrical resistivity, we characterize the electronic properties of NdCd 3 ⁢P 3 and compare results to density functional theory calculations.

36 MATERIALS SCIENCE↗
DOE OSTI2021

EIC Hadron Beamline Vacuum Studies

Ninety percent of the EIC hadron ring vacuum chamber consists of cold-bore sections running through and interconnecting 4.55 K RHIC superconducting (SC) magnets. The EIC operating specification requires shorter bunches and 3x higher intensity beams which are not appropriate for the present RHIC stainless steel cold-bore beam tube. The intensity and emittance of the hadron beams will degrade due to interactions with residual gas or vacuum instabilities arising from the expected resistive-wall (RW) heating, electron clouds, and beam-induced desorption mechanisms. Without strategies to limit RW heating, major cryogenic system modifications are needed to prevent SC magnet quenches. The SC magnet cold-bore beam tubes will be equipped with a high RRR copper-clad stainless steel screen to significantly reduce RW heating and so the effect on the SC magnet cryogenic heat load and temperature. A thin amorphous carbon film applied to the beam-facing copper surface will suppress electron cloud formation. This paper discusses the vacuum requirements imposed by the EIC hadron beams and the plans to achieve the necessary vacuum and thermal stability that ensure acceptable beam quality and lifetime.

43 PARTICLE ACCELERATORS↗
DOE OSTI2023

Collective Energy Transport of Excitons in Two-dimensional Materials

Electronic thermal transport and thermoelectric measurements are pursued in this project to obtain unique insights into the unusual collective energy transport behaviors in two-dimensional (2D) heterostructures. Electronic thermal transport and thermoelectric measurements are essential techniques for characterizing bulk superconductors by probing the heat-carrying quasi-particles. Thermoelectric and electronic thermal transport measurements are expanded in this work beyond bulk systems to probe interactions among electrons, holes, and phonons in 2D heterostructures. In one experiment, a microbridge platform is advanced to demonstrate field-effect resistive-thermometry measurements of the electronic thermal conductivity of graphene heterostructures. Together with first principles theoretical calculations and analytical models, the experimental results suggest that tunable electron coupling with flexural phonons provides a knob to control quantum matters in graphene heterostructures with broken reflection symmetry. In another experiment, the Seebeck coefficient (S) is measured to probe interlayer interactions in electron-hole bilayers that are predicted to give rise to the emergence of a variety of correlated states. As a measure of the entropy, the measured S reveals the signature of electric injection of interlayer excitons in transition metal dichalcogenide (TMD) structures.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Purely electronic insulator-metal transition in rutile VO 2

Volatile resistive switching in neuromorphic computing can be tuned by external stimuli such as temperature or electric-field. However, this type of switching is generally coupled to structural changes, resulting in slower reaction speed and higher energy consumption when incorporated into an electronic device. The vanadium dioxide (VO 2 ), which has near room temperature metal-insulator transition (MIT), is an archetypical volatile resistive switching system. Here, we demonstrate an isostructural MIT in an ultrathin VO 2 film capped with a photoconductive cadmium sulfide (CdS) layer. Transmission electron microscopy, resistivity experiments, and first-principles calculations show that the hole carriers induced by CdS photovoltaic effect are driving the MIT in rutile VO 2 . The insulating-rutile VO 2 phase has been proved and can remain stable for hours. Our finding provides a new approach to produce purely electronically driven MIT in VO 2 , and widens its applications in fast-response, low-energy neuromorphic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

Ultra-low thermal resistance and pressure drop copper and copper-tungsten diamond-shaped pin fin cold plates for liquid cooling of electronics

Modern and future data centers face increasing cooling challenges due to increasing chip thermal design power and die size, along with the need to reduce energy consumption used for cooling. High performance cooling solutions that maintain a low chip junction temperature are needed to ensure electronics reliability. This work develops an ultra-low thermal resistance and low pressure drop 75 mm × 75 mm cold plate, intended for next-generation electronics cooling. The cold plate features an array of diamond-shaped pin fins and integrated copper tungsten heat spreader, selected for its low coefficient of thermal expansion which reduces thermomechanical deformation and allows for closer integration of the cold plate with silicon dies. Starting with 300 candidate designs, three-dimensional computational fluid dynamics simulations predict the thermal-hydraulic performance of cold plate subsections. The highest performing geometries are evaluated with high fidelity simulations. Four cold plates are manufactured for experiments: three with diamond-shaped pin fins and one with straights fins for comparison purposes. The cold plates are fabricated from copper-tungsten (CuW), copper (Cu), or aluminum-silicon-magnesium alloy (AlSi10Mg). The diamond-shaped pin fins achieve a roughly 15 % lower thermal resistance compared to the conventional straight fin microchannel. The highest performing design achieves a chip-to-coolant (including thermal interface material) thermal resistance of 9.0 K/kW in CuW and 6.9 K/kW in Cu under a 1 kW heat load with an inlet-to-outlet pressure drop of 9.0 kPa and water as the working fluid. This work demonstrates ultra-low thermal resistance and pressure drop cold plates for large die, high heat load applications, and shows that CuW is an attractive cold plate material for improved reliability in next generation data center cooling.

Coefficient of thermal expansion↗
DOE OSTI2021

Electronic properties of the bulk and surface states of Fe 1+y Te 1-x Se x

The idea of employing non-Abelian statistics for error-free quantum computing ignited interest in reports of topological surface superconductivity and Majorana zero modes (MZMs) in FeTe 0.55 Se 0.45 . However, the topological features and superconducting properties are not observed uniformly across the sample surface. The understanding and practical control of these electronic inhomogeneities present a prominent challenge for potential applications. Here, we combine neutron scattering, scanning angle-resolved photoemission spectroscopy, and microprobe composition and resistivity measurements to characterize the electronic state of Fe 1+y Te 1-x Se x . Furthermore, we establish a phase diagram in which the superconductivity is observed only at sufficiently low Fe concentration, in association with distinct antiferromagnetic correlations, whereas the coexisting topological surface state occurs only at sufficiently high Te concentration. We find that FeTe 0.55 Se 0.45 is located very close to both phase boundaries, which explains the inhomogeneity of superconducting and topological states. Our results demonstrate the compositional control required for use of topological MZMs in practical applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Confinement-Induced Chiral Edge Channel Interaction in Quantum Anomalous Hall Insulators

In quantum anomalous Hall (QAH) insulators, the interior is insulating but electrons can travel with zero resistance along one-dimensional (1D) conducting paths known as chiral edge channels (CECs). These CECs have been predicted to be confined to the 1D edges and exponentially decay in the two-dimensional (2D) bulk. Here, in this Letter, we present the results of a systematic study of QAH devices fashioned in a Hall bar geometry of different widths under gate voltages. At the charge neutral point, the QAH effect persists in a Hall bar device with a width of only ~7⁢2 nm, implying the intrinsic decaying length of CECs is less than ~3⁢6 nm. In the electron-doped regime, we find that the Hall resistance deviates quickly from the quantized value when the sample width is less than 1 μ⁢m. Our theoretical calculations suggest that the wave function of CEC first decays exponentially and then shows a long tail due to disorder-induced bulk states. Therefore, the deviation from the quantized Hall resistance in narrow QAH samples originates from the interaction between two opposite CECs mediated by disorder-induced bulk states in QAH insulators, consistent with our experimental observations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Beam-Impedance Considerations for the EIC HSR Screen

The hadron storage ring (HSR) of the Electron-Ion Collider (EIC) will use the superconducting magnets from the Relativistic Heavy Ion Collider (RHIC). However, the beam pipes of these magnets show too large resistive-wall impedance and secondary electron yield to the HSR beams. The planned solution is to install beam screens that feature a thin film of amorphous carbon with low SEY on top of a high RRR copper layer for reduced impedance. This note discusses beam-impedance considerations that impact the EIC HSR beam screen design.

43 PARTICLE ACCELERATORS↗
DOE OSTI2025

PtCoO 2 for Scaled Interconnects

Copper (Cu) interconnects are an increasingly important bottleneck in integrated circuits due to energy consumption and latency caused by the notable increase in Cu resistivity as dimensions decrease, primarily due to electron scattering at surfaces. Herein, the potential of a directional conductor, PtCoO 2 , which has a low bulk resistivity and a distinctive anisotropic structure that mitigates electron surface scattering is showcased. Thin films of PtCoO 2 of various thicknesses are synthesized by molecular beam epitaxy (MBE) coupled with a postdeposition annealing process and the superior quality of PtCoO 2 films is demonstrated by multiple characterization techniques. The thickness‐dependent resistivity curve illustrates that PtCoO 2 significantly outperforms effective Cu (Cu with TaN barriers) and Ru in resistivity below 20.0 nm with a more than 6x reduction compared to effective Cu below 6.0 nm, having a value of only 6.32 μΩ cm at 3.3 nm. It is determined that grain boundary scattering can still be improved for even lower resistivities in this material system through a combination of experiments and theoretical simulations. PtCoO 2 is therefore a highly promising alternative material for future interconnect technologies promising lower resistivities, better stability, and significant improvements in energy efficiency and latency for advanced integrated circuits.

Li, Yansong [Department of Electrical Engineering ↗
DOE OSTI2025

In Situ Analysis of Electron-Induced Chemical Transformations in Vapor-Phase-Synthesized Al-Based Inorganic–Organic Hybrid Thin Films for EUV Resist Platform

The rapid advancement and stringent requirements of extreme ultraviolet (EUV) lithography technology necessitate the development of advanced photoresist systems for next-generation microelectronics. Recent studies have demonstrated that inorganic-based hybrid photoresists offer notable improvements in EUV sensitivity, etch resistance, and greater insusceptibility to pattern collapse compared to their purely organic counterparts. However, variations in the synthesis/coating approaches and chemistry of inorganic–organic photoresists can result in distinct exposure mechanisms. In this work, an Al-based hybrid thin film resist system synthesized via molecular (atomic) layer deposition (MLD or MALD) is explored, focusing on its electron-beam and EUV patterning mechanisms. The Al-based hybrid thin films are deposited using trimethylaluminum (TMA) and the organic precursor hydroquinone, exhibiting a saturated growth rate within the temperature range of 150–200°C. In diluted tetramethylammonium hydroxide (TMAH)-based developer solutions, the electron-irradiated Al-based hybrid thin film system behaves as a negative tone resist, achieving a sensitivity of 10.4 mC/cm 2 at 0.1 kV electron beam lithography (EBL). Chemical changes induced by electron exposure are also analyzed in this study using X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, and a unique infrared spectroscopy setup, revealing the potential cross-linking pathways. To further correlate the electron-induced chemical transformations with those mediated by EUV irradiations, a combination of X-ray photoemission electron microscopy/low-energy electron microscopy (XPEEM/LEEM) system is also employed. In conclusion, this study provides critical insights into the mechanisms underlying solubility switching and contributes to the design of advanced resist materials for EUV lithography.

36 MATERIALS SCIENCE↗