Search NASA⌕ Search

SEARCH · Search NASA

Results for “High activity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS2005

Salt Kinematics and InSAR

As part of a long-term attempt to learn how the climatic and tectonic signal interact to shape a steady state mountain monitored displacement of a markers in SE termination and also near the summit of a small viscous salt fountain extruding onto the Central plateau of Iran. The marker displacements relate to the first InSAR interferograms of salt extrusion (980913 to 990620) calculated Earth tides, winds, air pressures and temperatures. In the first documented staking exercise, hammered wooden stakes vertically through the surgical marl (c. 1 Ocm deep) onto the top of crystalline salt. These stakes installed in an irregular array elongate E-W along the c.50 m high cliff marking the effective SE terminus of the glacier at Qum Kuh(Centra1 Iran) ,just to the E of a NE trending river cliff about 40 m high. We merely measured the distances between pairs of stakes with known azimuth about 2 m apart to calculate sub horizontal strain in a small part of Qum Kuh. Stakes moved and micro strains for up to 46 pairs of stakes (p strain= ((lengthl-length2)/1engthl) x 10-1) was calculated for each seven stake epochs and plotted against their azimuth on simplified array maps. The data fit well the sine curves cxpected of the maximum and minimum strain ellipses. The first documented stakes located on the SE where the InSAR image show -1 1 to 0 mm pink to purple, 0 to lOmm purple to blue, and show high activity of salt in low activity area of the InSAR image (980913 to 990620).Short term micro strains of stake tie lines record anisotropic expansions due to heating and contraction due to cooling. All epochs changed between 7 to 1 17 days (990928 to000 1 16), showed 200 to 400 micro strain lengthening and shortening. The contraction and extension existed in each epoch, but the final strain was extension in E-W in Epoch land 6, contraction in E-W direction during epochs 2-3-4-5 and 7. The second pair of stakes hammered about 20 cm deep into the deep soils(more than 1 m) , near summit, where the colors change between 19 to 29mm in InSAR image(9809 13 to 990620). Additional information is included in the original abstract.

Aftabi, Pedarm↗
NASA NTRS1996

Process for producing nickel electrode having lightweight substrate

A nickel electrode having a lightweight porous nickel substrate is subjected to a formation cycle involving heavy overcharging and under-discharging in a KOH electrolyte having a concentration of 26% to 31%, resulting in electrodes displaying high active material utilization.

Lim, Hong S.↗
NASA NTRS2010

Understanding the Reactivity of Lunar Dust for Future Lunar Missions

Fluorescence and EPR can be used to measure the reactivity of lunar soil. Lunar soil is highly activated by grinding. Reactivity is dependent upon soil maturity and locale. Maturity is based on the amount of nanophase iron (np-Fe) in a soil relative to the total iron (FeO). Lunar soil activity ia a direct function of the amount of np-Fe present. Reactive soil can be "deactivated" by humid atmosphere.

Wallace, W. T.↗
NASA NTRS2010

Catalyst for Carbon Monoxide Oxidation

In many applications, it is highly desirable to operate a CO2 laser in a sealed condition, for in an open system the laser requires a continuous flow of laser gas to remove the dissociation products that occur in the discharge zone of the laser, in order to maintain a stable power output. This adds to the operating cost of the laser, and in airborne or space applications, it also adds to the weight penalty of the laser. In a sealed CO2 laser, a small amount of CO2 gas is decomposed in the electrical discharge zone into corresponding quantities of CO and O2. As the laser continues to operate, the concentration of CO2 decreases, while the concentrations of CO and O2 correspondingly increase. The increasing concentration of O2 reduces laser power, because O2 scavenges electrons in the electrical discharge, thereby causing arcing in the electric discharge and a loss of the energetic electrons required to boost CO2 molecules to lasing energy levels. As a result, laser power decreases rapidly. The primary object of this invention is to provide a catalyst that, by composition of matter alone, contains chemisorbed water within and upon its structure. Such bound moisture renders the catalyst highly active and very long-lived, such that only a small quantity of it needs to be used with a CO2 laser under ambient operating conditions. This object is achieved by a catalyst that consists essentially of about 1 to 40 percent by weight of one or more platinum group metals (Pt, Pd, Rh, Ir, Ru, Os, Pt being preferred); about 1 to 90 percent by weight of one or more oxides of reducible metals having multiple valence states (such as Sn, Ti, Mn, Cu, and Ce, with SnO2 being preferred); and about 1 to 90 percent by weight of a compound that can bind water to its structure (such as silica gel, calcium chloride, magnesium sulfate, hydrated alumina, and magnesium perchlorate, with silica gel being preferred). Especially beneficial results are obtained when platinum is present in the catalyst composition in an amount of about 5 to 25 (especially 7) percent by weight, SnO2 is present in an amount of about 30 to 40 (especially 40) percent by weight, and silica gel is present in an amount of 45 to 55 (especially 50) percent by weight. The composition of this catalyst was suggested by preliminary experiments in which a Pt/SnO2 catalyst was needed for bound water to enhance its activity. These experimental results suggested that if the water were bound to the surface, this water would enhance and prolong catalyst activity for long time periods. Because the catalyst is to be exposed to a laser gas mixture, and because a CO2 laser can tolerate only a very small amount of moisture, a hygroscopic support for the catalyst would provide the needed H2O into the gas. Silica gel is considered to be superior because of its property to chemisorb water on its surface over a wide range of moisture content.

Davis, Patricia↗
NASA NTRS2009

Decadal Variation of the Number of El Nino Onsets and El Nino-Related Months and Estimating the Likelihood of El Nino Onset in a Warming World

Examination of the decadal variation of the number of El Nino onsets and El Nino-related months for the interval 1950-2008 clearly shows that the variation is better explained as one expressing normal fluctuation and not one related to global warming. Comparison of the recurrence periods for El Nino onsets against event durations for moderate/strong El Nino events results in a statistically important relationship that allows for the possible prediction of the onset for the next anticipated El Nino event. Because the last known El Nino was a moderate event of short duration (6 months), having onset in August 2006, unless it is a statistical outlier, one expects the next onset of El Nino probably in the latter half of 2009, with peak following in November 2009-January 2010. If true, then initial early extended forecasts of frequencies of tropical cyclones for the 2009 North Atlantic basin hurricane season probably should be revised slightly downward from near average-to-above average numbers to near average-to-below average numbers of tropical cyclones in 2009, especially as compared to averages since 1995, the beginning of the current high-activity interval for tropical cyclone activity.

Wilson, Robert M.↗
NASA NTRS2008

Stochastic Transport Theory for Investigating the Three-Dimensional Canopy Structure from Space Measurements

Radiation reflected from vegetation canopies exhibits high spatial variation. Satellite-borne sensors measure the mean intensities emanating from heterogeneous vegetated pixels. The theory of radiative transfer in stochastic media provides the most logical linkage between satellite observations and the three-dimensional canopy structure through a closed system of simple equations which contains the mean intensity and higher statistical moments directly as its unknowns. Although this theory has been a highly active research field in recent years, its potential for satellite remote sensing of vegetated surfaces has not been fully realized because of the lack of models of a canopy pair-correlation function that the stochastic radiative transfer equations require. The pair correlation function is defined as the probability of finding simultaneously phytoelements at two points. This paper presents analytical and Monte Carlo generated pair correlation functions. Theoretical and numerical analyses show that the spatial correlation between phytoelements is primarily responsible for the effects of the three-dimensional canopy structure on canopy reflective and absorptive properties. The pair correlation function, therefore, is the most natural and physically meaningful measure of the canopy structure over a wide range of scales. The stochastic radiative transfer equations naturally admit this measure and thus provide a powerful means to investigate the three-dimensional canopy structure from space. Canopy reflectances predicted by the stochastic equations are assessed by comparisons with the PARABOLA measurements from coniferous and broadleaf forest stands in the BOREAS Southern Study Areas. The pair correlation functions are derived from data on tree structural parameters collected during field campaigns conducted at these sites. The simulated canopy reflectances compare well with the PARABOLA data.

Huang, Dong↗
NASA NTRS2011

The July 2010 Outburst of the NLS1 PMN J0948+0022

We report about the multiwavelength campaign on the Narrow-Line Seyfert 1 (NLS1) Galaxy PMN J0948+0022 (z = 0.5846) performed in 2010 July-September and triggered by high activity as measured by Fermi/LAT. The peak luminosity in the 0.1 - 100 GeV energy band exceeded, for the first time in this type of source, the value of 1048 erg/s, a level comparable to the most powerful blazars. The comparison of the spectral energy distribution of the NLS1 PMN J0948+0022 with that of a typical blazar like 3C 273 shows that the power emitted at gamma rays is extreme.

Foschini, L.↗
NASA NTRS2015

Food Fortification Stability Study

NASA has established the goal of traveling beyond low-Earth orbit and extending manned exploration to Mars. The extended length of a Mars mission, along with the lack of resupply missions increases the importance of nutritional content in the food system. The purpose of this research is to assess the stability of vitamin supplementation in traditionally processed spaceflight foods. It is expected that commercially available fortificants will remain stable through long-duration missions if proper formulation, processing, and storage temperatures are all achieved. Five vitamins (vitamin E, vitamin K, pantothenic acid, folic acid, and thiamin) were blended into a vitamin premix (DSM, Freeport, TX); premixes were formulated to be compatible with current processing techniques (retort or freeze-dried), varied water activities (high or low), and packaging material. The overall goal of this process is to provide 25% of the recommended daily intake of each vitamin (per serving), following processing and two years of ambient storage. Four freeze-dried foods (Scrambled Eggs, Italian Vegetables, Potatoes Au Gratin, Noodles and Chicken) and four thermostabilized foods (Curry Sauce with Vegetables, Chicken Noodle Soup, Grilled Pork Chop, Rice with Butter) were produced (with and without the vitamin premix), to assess the impact of the added fortificant on color and taste, and to determine the stability of supplemental vitamins in spaceflight foods. The use of fortification in spaceflight foods appears to be a plausible mitigation step to inadequate nutrition. This is due to the ease of vitamin addition as well as the sustainability of the premixes through initial processing steps. Postprocessing analysis indicated that vitamin fortification with this premix did not immediately impact organoleptic properties of the food. At this stage, the largest hurdle to fortification is the preciseness to which vitamins can be added; the total amount of vitamins required for production is 10 - 20 grams, a minor percentage of the formulation. As demonstrated by the over-fortification measured in Italian Vegetables and Grilled Pork Chop, homogeneity may be difficult to achieve with such small amounts. Thus, pouch-to-pouch variability, over-fortification, and underfortification may ensue if a method for precise addition is not identified. Stability will continue to be evaluated over two years of storage at three temperatures, and future analysis should reveal the extent to which this issue should be a concern

Abdulmalik, T. O.↗
NASA NTRS2011

Comet Ephemerides for the EPOXI and Stardust-NExT Flybys

The recently successful flybys of Comet 103P/Hartley 2 by the Deep Impact spacecraft and Comet 9P/Tempel 1 by the Stardust spacecraft each presented different challenges from the perspective of comet ephemeris prediction and spacecraft targeting. Hartley 2 is a small, highly active comet, with nongravitational accelerations that proved very difficult to model, requiring some amount of "cometchasing" by the spacecraft navigators. In contrast, Tempel 1 is a far larger and less active comet. It showed very stable ephemeris behavior and at flyby was within 1-sigma of predictions issued more than a year prior to encounter. This happenstance was fortuitous because the Stardust spacecraft had very little fuel margin available for comet ephemeris errors.

non-gravitational accelerations↗
NASA NTRS2015

The 2014 KCG Meteor Outburst: Clues to a Parent Body

The Kappa Cygnid (KCG) meteor shower exhibited unusually high activity in 2014, producing ten times the typical number of meteors. The shower was detected in both radar and optical systems and meteoroids associated with the outburst spanned at least five decades in mass. In total, the Canadian Meteor Orbit Radar, European Network, and NASA All Sky and Southern Ontario Meteor Network produced thousands of KCG meteor trajectories. Using these data, we have undertaken a new and improved characterization of the dynamics of this little-studied, variable meteor shower. The Cygnids have a di use radiant and a significant spread in orbital characteristics, with multiple resonances appearing to play a role in the shower dynamics. We conducted a new search for parent bodies and found that several known asteroids are orbitally similar to the KCGs. N-body simulations show that the two best parent body candidates readily transfer meteoroids to the Earth in recent centuries, but neither produces an exact match to the KCG radiant, velocity, and solar longitude. We nevertheless identify asteroid 2001 MG1 as a promising parent body candidate.

Moorhead, Althea V.↗
NASA NTRS2018

Co-Adsorption of Carbon Dioxide on Zeolite 13X in the Presence of Preloaded Water

Environmental Control and Life Support requires highly effective CO2 removal systems. The current system onboard the International Space Station is known as Carbon Dioxide Removal Assembly. Recent high-fidelity simulation of this system predicted a major efficiency gain via reduction of desiccant zeolite. Commercial beaded 13X zeolite is used in the desiccant bed to scrub water below 1 ppm but is also a highly active CO2 sorbent. The simultaneous adsorption of water vapor and CO2 is known to strongly favor water, but more accurate measurements are needed. This work details the characterization of the zeolite to be used in the next-generation CO2 removal system for co-adsorption of water and CO2.

Cmarik, Gregory E↗
NASA NTRS2018

Upgrades to the International Space Station Water Processor Assembly

The International Space Station Water Processor Assembly provides contaminant control and deionization to the Water Recovery System. The Water Processor Assembly presently utilizes sorbent-based Multifiltration Beds and a downstream Catalytic Reactor for these operations. Upgrades and process improvements are desired to improve performance, increase reliability, and decrease consumable resupply. To this end, reverse osmosis membrane separation technologies were evaluated to reduce influent contaminant loads, candidate additives to inhibit wastewater biofilm formation were studied, and life stability testing was completed for a recently developed high-activity catalyst. Evaluation of an adsorption media integration concept was also completed. The performance and applicability of these new technologies within the Water Processor Assembly, as well as their suitability for exploration missions, are discussed herein.

Kayatin, Matthew J.↗
NASA NTRS2013

The Regolith Biters: A Divide-And-Conquer Architecture for Sample-Return Missions

The collective interaction of simple systems can be leveraged to attain complex goals. Based on this principle, we envision space system architectures where the core functional components are decoupled, autonomous, and cooperative. We aim to pursue this vision in the context of small-body sample-return missions. After all, no experimental study sheds more light into our understanding of the origin and evolution of the Solar System than the analysis of samples from asteroids and comets. We also believe that their study is important from a strategic perspective: meteorite impacts pose a direct and credible threat to life on Earth, and the development of contingency small-body deflection missions presupposes some knowledge of the target body. The current architectural paradigm for sample-return missions is centered around a design where spacecraft and sampling device are merged into a single, complex system. We argue that this monolithic approach couples the navigation and sample-collection problems, making both more difficult. In contrast, we propose a decoupled system based on the coordinated interaction between a spacecraft and a collective of small, simple devices - the Regolith Biters (RBs). A spacecraft carrying a number of RBs would travel to the vicinity of a small body. From a favorable vantage point, and while remaining within a safe distance in a non-colliding trajectory, it would release the RBs towards the target body. Upon encountering the body, they would bite the regolith (thus retaining a sample), and eject back to orbit. The spacecraft, being endowed with appropriate navigation and tracking capabilities, would rendezvous with and collect those RBs within its reach, and bring them back to Earth. Separating the navigation and sampling concerns removes the need for proximity operations with the small body-the stage in current architectures that carries the most challenges and risks. Eliminating the need for proximity operations brings back to the discussion the exploration of exciting prospects, like highly active comets, fast-rotating bodies, and binary systems. Distributing the sampling problem among a collective of agents provides the opportunity to sample multiple regions in a single mission. It also provides robustness to various environmental conditions, and may enable the distributed, in situ characterization of the body. In the search for reliability, current architectures rely on complexity: an elaborate system should succeed at once. We rely on numbers: a given agent may fail at any stage, but success is attained by the collective.

Asteroids↗
NASA NTRS2021

The X-ray Bursts of XTE J1739-285: A NICER Sample

In this work, we report on observations with the Neutron Star Interior Composition Explorer of the known neutron star X-ray transient XTE J1739–285. We observed the source in 2020 February and March, finding it in a highly active bursting state. Across a 20 day period, we detected 32 thermonuclear X-ray bursts, with an average burst recurrence time of-+2.0 hr0.30.4. A timing and spectral analysis of the ensemble of X-ray bursts reveals homogeneous burst properties, evidence for short-recurrence time bursts, and the detection of a 386.5 Hz burst oscillation candidate. The latter is especially notable, given that a previous study of this source claimed a 1122 Hz burst oscillation candidate. We did not find any evidence of variability near 1122 Hz and instead find that the 386.5 Hz oscillation is the more prominent signal of the two burst oscillation candidates. Hence, we conclude it is unlikely that XTE J1739–285 has a submillisecond rotation period.

X-ray burst↗
NASA NTRS2020

Subseasonal-to-Seasonal Hindcast Skill Assessment of Ridging Events Related to Drought Over the Western United States

Persistent atmospheric ridging events centered near the western United States are associated with widespread precipitation deficits and meteorological drought. Due to the relatively low skill of- dynamical models in forecasting precipitation on subseasonal‐to‐seasonal (S2S) time scales across this region, forecasts of ridging are explored in this study as a potential bridge for early warning drought prediction. To assess skill, we evaluate deterministic and probabilistic S2S hindcasts (out to 6 week lead time) of ridging events and geopotential height anomalies over the western United States in five ensemble hindcast systems. Prediction skill for ridging events is shown to be highly variable across models. For some models, longer‐time‐averaged patterns of geopotential height anomalies across the first 6 weeks can be skillfully simulated, when evaluated probabilistically against climatology. The most skillful models show modest skill in forecasting above normal ridging occurrences at lead times of Weeks 3–4 and Weeks 5–6,with some sensitivity to the specific ridge location and method for determining skill. Using the European Centre for Medium‐Range Weather Forecasts (ECMWF) model as a case study, longer lead time forecast busts are shown to often occur under extended periods of highly active La Nina‐like tropical convection. Model errors at simulating these tropical convection features may have a disproportionately large impact and degrade downstream forecasts over the western United States. Despite the documented model shortcomings, our results highlight an opportunity to target skillful ridging forecasts from dynamical models for improving early warning drought forecasting at S2S lead times.

S2S↗
NASA NTRSDate not supplied

Adventures in Astronomical Time Series Analysis

Welcome to a tour of the volatile, highly active Universe — in stark contrast to earlier serene ``clockwork’’ visions. Innovative data analysis techniques have illuminated explosive physical processes animating these systems. Examples include a Fourier transform suited to the irregular sampling characteristic of much astronomical data, but time domain techniques will be emphasized for these applications: gamma-ray activity in the Crab Nebula, gamma-ray bursts, active galactic nuclei, and gravitational waves. I hope this talk will change some of the ways you carry out statistical data analysis.

Jeffrey D Scargle↗
NASA NTRS2022

29P/Schwassmann–Wachmann 1: A Rosetta Stone for Amorphous Water Ice and CO↔CO 2 Conversion in Centaurs and Comets?

Centaur 29P/Schwassmann–Wachmann 1 (SW1) is a highly active object orbiting in the transitional "Gateway" region between the Centaur and Jupiter-family comet (JFC) regions. SW1 is unique among the Centaurs in that it experiences quasi-regular major outbursts and produces CO emission continuously; however, the source of the CO is unclear. We argue that, due to its very large size (∼32 km radius), SW1 is likely still responding, via amorphous water ice (AWI) conversion to crystalline water ice (CWI), to the "sudden" change in its external thermal environment produced by its Myrs-long dynamical migration from the Kuiper Belt to its current location at the inner edge of the Centaur region. It is this conversion process that is the source of the abundant CO and dust released from the object during its quiescent and outburst phases. If correct, these arguments have a number of important predictions testable via remote sensing and in situ spacecraft characterization, including the quick release on Myr timescales of CO from AWI conversion for any few kilometer-scale scattered disk Kuiper Belt Objects transiting into the inner system; that to date SW1 has only converted between 50% and 65% of its nuclear AWI to CWI; that volume changes on AWI conversion could have caused subsidence and cave-ins, but not significant mass wasting or crater loss; that SW1's coma should contain abundant amounts of CWI+CO 2 "dust" particles; and that when SW1 transits into the inner system within the next 10,000 yr, it will be a very different kind of JFC.

Centaur 29P/Schwassmann–Wachmann 1(SW1)↗
NASA NTRS2010

Development and Application of Plasma Actuators for Active Control of High-Speed and High Reynolds Number Flows

Active flow control is often used to manipulate flow instabilities to achieve a desired goal (e.g. prevent separation, enhance mixing, reduce noise, etc.). Instability frequencies normally scale with flow velocity scale and inversely with flow length scale (U/l). In a laboratory setting for such flow experiments, U is high, but l is low, resulting in high instability frequency. In addition, high momentum and high background noise & turbulence in the flow necessitate high amplitude actuation. Developing a high amplitude and high frequency actuator is a major challenge. Ironically, these requirements ease up in application (but other issues arise).

Sammy, Mo↗