Search NASA⌕ Search

SEARCH · Search NASA

Results for “avoidance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Development and Certification of a New Stall Warning and Avoidance System

Several methods may be employed to improve natural stall characteristics. The method employed on all learjets to obtain improved stall characteristics is a stall warning and avoidance system that employs angle of attack vanes, an electronic computer, a control column shaker motor, and a torquer which drives the control column in a pusher mode to avoid unwanted further buildup of angle of attack. The new system was developed with changes that improve system response with no performance penalty or increase in turbulence sensitivity. The following changes were made included modified system time constants and (alpha) time rate of change of vane angle dead zone and the addition of an alpha signal limiter and an alpha cut out below a specified angle of attack.

Gertsen, W. M.↗
NASA NTRS1984

Influence of a perspective cockpit traffic display format on pilot avoidance maneuvers

Perspective projections of cockpit displays of traffic information (CDTI) on CRTs to present vertical separation information to airline pilots were examined. The perspective projection was compared with plan view projections of the same air traffic situations. Comparison of the pilots' avoidance maneuvers made when using the perspective display with those made while using more the conventional plan view display showed that pilots maneuvered somewhat earlier with perspective displays. With the perspective display, they maneuvered more frequently in the vertical dimension. The bias to maneuver horizontally probably reflected the poorer presentation of vertical separation on previously used plan view traffic displays. The avoidance decisions made by pilots using both perspective and plan view displays shows fewer unsuccessful maneuvers and fewer maneuvers producing spacing violations with the perspective format.

Ellis, S. R.↗
NASA NTRS1985

Node-avoiding Levy flight - A numerical test of the epsilon expansion

A study is conducted of an extension of Levy flight to include self-repulsion in the path of the walk. The extension is called node-avoiding Levy flight and its equivalence to the n approaches 0 limit of a statistical mechanical model for a magnetic system with long-range interactions between the spins is shown. By use of this equivalence it is possible to make a detailed comparison beween the results of the epsilon expansion for the magnetic model, a Monte Carlo simulation of the Levy flight model, and the results of a Flory-type argument. This is the first comparison of the epsilon expansion for epsilon much less than 1 with a numerical simulation for any model. Some speculations are made on applications of the model of node-avoiding Levy flight.

Halley, J. W.↗
NASA NTRS1987

Information transfer in pilots' use of a collision avoidance system

A flight simulator study of pilots' use of the Traffic-alert and Collision Avoidance System is described. Three levels of information on the location of other air traffic were presented to different groups of airline pilots. The amount of informtion on the location of other traffic had little effect on pilots' performance of the maneuvers commanded by the collision avoidance system. Measured crew responses were similar with no presentation of traffic location, with limited information, and with continuous traffic information. No learning effects were observed, and differences in flight experience did not contribute to the performance difference found.

Chappell, Sheryl L.↗
NASA NTRS1988

The Traffic-Alert and Collision Avoidance System (TCAS) in the glass cockpit

This volume contains the contributions of the participants in the NASA Ames Research Center workshop on the traffic-alert and collision avoidance system (TCAS) implementation for aircraft with cathode ray tube (CRT) or flat panel displays. To take advantage of the display capability of the advanced-technology aircraft, NASA sponsored this workshop with the intent of bringing together industry personnel, pilots, and researchers so that pertinent issues in the area could be identified. During the 2-day workshop participants addressed a number of issues including: What is the optimum format for TCAS advisories. Where and how should maneuver advisories be presented to the crew. Should the maneuver advisories be presented on the primary flight display. Is it appropriate to have the autopilot perform the avoidance maneuver. Where and how should traffic information be presented to the crew. Should traffic information be combined with weather and navigation information. How much traffic should be shown and what ranges should be used. Contained in the document are the concepts and suggestions produced by the workshop participants.

Chappell, Sheryl L.↗
NASA NTRS1989

Integration of active and passive sensors for obstacle avoidance

The automatic obstacle-avoidance guidance problem is studied under the operational constraints imposed by the rotorcraft nap-of-the-earth (NOE) environment. The problem is discussed for two different circumstances. The first assumes that a full range map is available, irrespective of the type of sensor being used. Two approaches are proposed to extend a two-dimensional obstacle-avoidance concept presented by Cheng (1988). The situation where only a sparse range map is available from a passive sensor is also treated. An integrated approach that augments the passive sensor with an active one is discussed, along with the problem of data fusion and how it is affected by the characteristics of NOE flight.

Cheng, Victor H. L.↗
NASA NTRS1990

Details Of Collision-Avoidance Study

Report provides background information on and detailed description of study of pilots' use of traffic-alert and collision-avoidance system (TCAS II) in simulated flights. Described in article, "Evaluation of an Aircraft-Collision-Avoidance System" (ARC-12367). Plans, forms, training narratives, scripts, questionnaires, and other information compiled.

Chappell, Sheryl L.↗
NASA NTRS1989

A collision avoidance system for a spaceplane manipulator arm

Part of the activity in the area of collision avoidance related to the Hermes spaceplane is reported. A collision avoidance software system which was defined, developed and implemented in this project is presented. It computes the intersection between the solids representing the arm, the payload, and the objects. It is feasible with respect to the resources available on board, considering its performance.

Sciomachen, Anna↗
NASA NTRS1989

Avoiding a maneuvering aircraft with TCAS

The present investigation was carried out in NASA's Man-Vehicle Systems Research Facility B 727 simulator because of the need for veridical aircraft response. Pilot performance was measured in testing TCAS II after an avoidance maneuver has been initiated. A proposed change to the system will cause the TCAS II to issue a subsequent maneuver. This maneuver may be an increase in climb or descent rate from 1500 to 2500 ft/min, or a change from a climb to a descent or a descent to a climb. Three questions were addressed: (1) can the pilot detect the change in the maneuver advisory, (2) can the pilot respond promptly and accurately to the new advisory, and (3) can the maneuver be performed in the normal operating envelope of the aircraft. The reaction times found in the study suggest that pilots are able to respond within the two seconds targeted by the TCAS logic. The pilot performance data were used to modify the TCAS II logic to reflect actual pilot performance. This will result in a safe and appropriate maneuver selection in the rare instance when the conflicting aircraft maneuvers, and by doing so invalidates the initial maneuver issued by the collision avoidance system.

Chappell, Sheryl L.↗
NASA NTRS1990

Fuzzy logic control system to provide autonomous collision avoidance for Mars rover vehicle

NASA is currently involved with planning unmanned missions to Mars to investigate the terrain and process soil samples in advance of a manned mission. A key issue involved in unmanned surface exploration on Mars is that of supporting autonomous maneuvering since radio communication involves lengthy delays. It is anticipated that specific target locations will be designated for sample gathering. In maneuvering autonomously from a starting position to a target position, the rover will need to avoid a variety of obstacles such as boulders or troughs that may block the shortest path to the target. The physical integrity of the rover needs to be maintained while minimizing the time and distance required to attain the target position. Fuzzy logic lends itself well to building reliable control systems that function in the presence of uncertainty or ambiguity. The following major issues are discussed: (1) the nature of fuzzy logic control systems and software tools to implement them; (2) collision avoidance in the presence of fuzzy parameters; and (3) techniques for adaptation in fuzzy logic control systems.

Murphy, Michael G.↗
NASA NTRS1991

Fuzzy Logic Path Planning System for Collision Avoidance by an Autonomous Rover Vehicle

Systems already developed at JSC have shown the benefits of applying fuzzy logic control theory to space related operations. Four major issues are addressed that are associated with developing an autonomous collision avoidance subsystem within a path planning system designed for application in a remote, hostile environment that does not lend itself well to remote manipulation of the vehicle involved through Earth-based telecommunication. A good focus for this is unmanned exploration of the surface of Mars. The uncertainties involved indicate that robust approaches such as fuzzy logic control are particularly appropriate. The four major issues addressed are: (1) avoidance of a single fuzzy moving obstacle; (2) back off from a dead end in a static obstacle environment; (3) fusion of sensor data to detect obstacles; and (4) options for adaptive learning in a path planning system.

Murphy, Michael G.↗
NASA NTRS1992

Real-time obstacle avoidance using harmonic potential functions

This paper presents a new formulation of the artificial potential approach to the obstacle avoidance problem for a mobile robot or a manipulator in a known environment. Previous formulations of artificial potentials for obstacle avoidance have exhibited local minima in a cluttered environment. To build an artificial potential field, harmonic functions that completely eliminate local minima even for a cluttered environment are used. The panel method is employed to represent arbitrarily shaped obstacles and to derive the potential over the whole space. Based on this potential function, an elegant control strategy is proposed for the real-time control of a robot. The harmonic potential, the panel method, and the control strategy are tested with a bar-shaped mobile robot and a three-degree-of-freedom planar redundant manipulator.

Kim, Jin-Oh↗
NASA NTRS1991

Collision avoidance for CTV: Requirements and capabilities

Collision avoidance must be ensured during Cargo Transfer Vehicle (CTV) operations near the space station. The design of the Collision Avoidance Maneuver (CAM) will involve analysis of CTV failure modes during rendezvous and proximity operations as well as analysis of possible problems external to the CTV, but that would require CTV to execute a CAM. In considering the requirements and design of the CAM for the CTV, the CAM design for the Orbital Maneuvering Vehicle (OMV) is a useful reference point from which some lessons can be learned and many CTV design options can be set forth.

Nosek, Thomas↗
NASA NTRS1991

Collision avoidance for CTV: Requirements and capabilities

Cargo transfer vehicle (CTV) operations near Space Station Freedom will require positive collision avoidance maneuver (CAM) capability to preclude any change of collision, even in the event of CTV failures. The requirements for CAM are discussed, and the CAM design approach and design of the Orbiting Maneuvering Vehicle (OMV) are reviewed; this design met requirements for OMV operation near the Space Station, provided a redundant collision avoidance maneuver capability. Significant portions of the OMV CAM design should be applicable to CTV. The key features of the OMV design are summarized and related to the CTV mission design to that of OMV's. CAM is a defined sequence of events executed by the CTV to place the vehicle in a safe position relative to a target such as the Space Station. CAM can be performed through software commands to the propulsion system, or through commands pre-stored in hardware. Various techniques for triggering CAM are considered, and the risks associated with CAM enable and execution in phases are considered. OMV CAM design features both hardware and software CAM capability, with analyses conducted to assess the ability to meet the collision-free requirement during all phases of the mission.

Nosek, Thomas P.↗
NASA NTRS1993

Control of a serpentine manipulator with collision avoidance

The robotics lab at the Kennedy Space Center is investigating the possibility of using a 'serpentine' manipulator for Shuttle inspection and payload processing. Serpentine manipulators are characterized by a large number of degrees of freedom giving them a high degree of redundancy. This redundancy allows them to be used to reach confined areas while avoiding collisions with their environment. In this paper, the author describes a new approach to controlling the joint rates for an n degree of freedom robot such that it moves its end effector to a desired position while simultaneously avoiding collision of any part of the robot arm with obstacles. Joint rates which move the end effector toward the target are found via a Lyapunov stability function. The gradient of an obstacle cost function indicates the direction toward obstacle collision in the joint space. The component of the end effector joint rates orthogonal to the obstacle gradient becomes the commanded joint rates. A notional eleven DOF model is used to numerically demonstrate the efficacy of the control law.

Byers, Robert M.↗
NASA NTRS1998

Weather Avoidance Using Route Optimization as a Decision Aid: An AWIN Topical Study

The aviation community is faced with reducing the fatal aircraft accident rate by 80 percent within 10 years. This must be achieved even with ever increasing, traffic and a changing National Airspace System. This is not just an altruistic goal, but a real necessity, if our growing level of commerce is to continue. Honeywell Technology Center's topical study, "Weather Avoidance Using Route Optimization as a Decision Aid", addresses these pressing needs. The goal of this program is to use route optimization and user interface technologies to develop a prototype decision aid for dispatchers and pilots. This decision aid will suggest possible diversions through single or multiple weather hazards and present weather information with a human-centered design. At the conclusion of the program, we will have a laptop prototype decision aid that will be used to demonstrate concepts to industry for integration into commercialized products for dispatchers and/or pilots. With weather a factor in 30% of aircraft accidents, our program will prevent accidents by strategically avoiding weather hazards in flight. By supplying more relevant weather information in a human-centered format along with the tools to generate flight plans around weather, aircraft exposure to weather hazards can be reduced. Our program directly addresses the NASA's five year investment areas of Strategic Weather Information and Weather Operations (simulation/hazard characterization and crew/dispatch/ATChazard monitoring, display, and decision support) (NASA Aeronautics Safety Investment Strategy: Weather Investment Recommendations, April 15, 1997). This program is comprised of two phases, Phase I concluded December 31, 1998. This first phase defined weather data requirements, lateral routing algorithms, an conceptual displays for a user-centered design. Phase II runs from January 1999 through September 1999. The second phase integrates vertical routing into the lateral optimizer and combines the user interface into a prototype software testbed. Phase II concludes with a dispatcher and pilot evaluation of the route optimizer decision aid. This document describes work completed in Phase I in contract with NASA Langley August 1998 - December 1998. This report includes: (1) Discuss how weather hazards were identified in partnership with experts, and how weather hazards were prioritized; (2) Static representations of display layouts for integrated planning function (3) Cost function for the 2D route optimizer; (4) Discussion of the method for obtaining, access to raw data of, and the results of the flight deck user information requirements definition; (5) Itemized display format requirements identified for representing weather hazards in a route planning aid.

Source record↗
NASA NTRS1995

Large-Scale Structures in the Zone of Avoidance: The Galactic Anticenter Region

We have selected a sample of 876 galaxy candidates from the IRAS Point Source Catalog in the region of 2(exp h) < alpha < 10(exp h) and 0 deg < delta < 36 deg, which crosses the Galactic anticenter part of the Zone of Avoidance (ZOA) and includes most of the highly obscured Orion-Taurus complex region. We have identified galaxies among the candidate sources by attempting to detect the 21 cm H I line of those sources which were not known to be galaxies at the beginning of the survey. In this manner, we constructed a galaxy sample which is largely free from Galactic reddening. Of the 272 observed candidates, 89 were detected in the H I line up to a heliocentric velocity of v(sub h) approximately 16,000 km/s. The resulting galaxy sample of 717 galaxies is fairly complete (within about 10%) and uniform (within about 4%) in the part of the survey area 10 deg away from the Galactic plane and for velocities up to at least 9000 km/s. This provides, for the first time, a largely unbiased view on the large-scale structures in much of the survey area. Our main results are the following: (1) Several large voids are identified. In particular, a void between alpha approximately equals 3(sup h) and 4(sup h), up to v(sub h) approximately 6000 km/s, separates the Pisces-Perseus supercluster at alpha < 3(sup h) from structures at alpha > 4(sup h); and a "nearby void" occupies most of our survey area and reaches out to a redshift of nearly 3000 km/s. (2) We found no nearby galaxy concentration that could significantly contribute to the "Local Velocity Anomoly" (LVA), but a general excess of galaxies around v(sub h) approximately 5000 km/s in the survey area. (3) The contrast between the "Great Wall" at v(sub h) approximately 8500 km/s and the void in front of it appears to gradually diffuse out after it enters the Zone of Avoidance from the northern Galactic hemisphere. (4) Our data combined with other galaxy surveys in or near the Galactic anticenter part of the ZOA suggest that the main ridge of the Pisces-Perseus supercluster does not extend to Abell 569, a cluster in the northern Galactic hemisphere, and that the simple gravitational model consisting of the Local Void of Tully & Fisher, our nearby void, and Puppis and Fornax-Eridanus clusters would predict a LVA whose direction is probably too far away from that derived from observations.

Lu, Nanyao Y.↗
NASA NTRS1999

Avoiding Braess' Paradox Through Collective Intelligence

In an Ideal Shortest Path Algorithm (ISPA), at each moment each router in a network sends all of its traffic down the path that will incur the lowest cost to that traffic. In the limit of an infinitesimally small amount of traffic for a particular router, its routing that traffic via an ISPA is optimal, as far as cost incurred by that traffic is concerned. We demonstrate though that in many cases, due to the side-effects of one router's actions on another routers performance, having routers use ISPA's is suboptimal as far as global aggregate cost is concerned, even when only used to route infinitesimally small amounts of traffic. As a particular example of this we present an instance of Braess' paradox for ISPA'S, in which adding new links to a network decreases overall throughput. We also demonstrate that load-balancing, in which the routing decisions are made to optimize the global cost incurred by all traffic currently being routed, is suboptimal as far as global cost averaged across time is concerned. This is also due to "side-effects", in this case of current routing decision on future traffic. The theory of COllective INtelligence (COIN) is concerned precisely with the issue of avoiding such deleterious side-effects. We present key concepts from that theory and use them to derive an idealized algorithm whose performance is better than that of the ISPA, even in the infinitesimal limit. We present experiments verifying this, and also showing that a machine-learning-based version of this COIN algorithm in which costs are only imprecisely estimated (a version potentially applicable in the real world) also outperforms the ISPA, despite having access to less information than does the ISPA. In particular, this COIN algorithm avoids Braess' paradox.

Wolpert , David H.↗