Search NASA⌕ Search

SEARCH · Search NASA

Results for “radiation absorption”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Significance of semiannual waves in the mesospheric zonal wind and evidence of influence by the geomagnetic field

The recently described polar semiannual oscillations in zonal wind can explain midwinter weakening of the polar winter vortex and the relatively short stratospheric and mesospheric summer easterlies. This explanation implies that stratospheric sudden warmings may be caused or affected by the polar semiannual oscillation. Two potential physical mechanisms (not mutually exclusive) for the oscillation are presented: planetary wave action and changes in the radiation field. Radiation absorption changes are suggested to result from changes in ozone concentration during magnetic storms. Contours of amplitude of both the polar and tropical semiannual wind oscillations are more nearly congruent with geomagnetic than with geographic latitude.

Belmont, A. D.↗

The radiobiological implications of statistical variations in energy deposition by ionizing radiations

Traditional approaches to microdosimetry, the fundamental physics of energy deposition, the importance of statistical processes, an illustration of possible radiobiological interpretation, and modeling based on microdosimetric concepts are discussed. Emphasis is on the inadequacies in linear energy transfer (LET) theory. For many reasons, concepts based on averaging may not be applicable to ionizing radiation absorption by and damage to small biological targets.

Baily, N. A.↗

Analytical study of laser supported combustion waves in hydrogen

A one-dimensional energy equation, with constant pressure and area, was used to model the LSC wave. This equation balances convection, conduction, laser energy absorption, radiation energy loss and radiation energy transport. Solutions of this energy equation were obtained to give profiles of temperature and other properties, as well as the relation between laser intensity and mass flux through the wave. The flow through the LSC wave was then conducted through a variable pressure, variable area streamtube to accelerate it to high speed, with the propulsion application in mind. A numerical method for coupling the LSC wave model to the streamtube flow was developed, and a sample calculation was performed. The result shows that 42% of the laser power has been radiated away by the time the gas reaches the throat. It was concluded that in the radially confined flows of interest for propulsion applications, transverse velocities would be less important than in the unconfined flows where air experiments have been conducted.

Kemp, N. H.↗

On the possibility of analytical approximation of line forms during random disorders of the resonance frequencies in molecular vibration-rotation spectra for satellite sounding

The generalization spectral line contour concept and formulas for a two component mixture, as well as consequences of the general formula are discussed. The calculation procedure, initial information, calculation results and comparison of calculations with available experimental data, for radiation absorption in three CO2 bands are presented.

Fomin, V. V.↗

MHD conversion of solar energy

Low temperature plasmas wherein an alkali metal vapor is a component are uniquely suited to simultaneously absorb solar radiation by coupling to the resonance lines and produce electrical power by the MHD interaction. This work is an examination of the possibility of developing space power systems which take advantage of concentrated solar power to produce electricity. It is shown that efficient cycles in which expansion work takes place at nearly constant top cycle temperature can be devised. The power density of the solar MHD generator is lower than that of conventional MHD generators because of the relatively high seed concentration required for radiation absorption and the lower flow velocity permitted to avoid total pressure losses due to heating.

Lau, C. V.↗

Some experience with arc-heater simulation of outer planet entry radiation

An electric arc heater was operated at 800 amperes and 100,000 pa (1 atm) with hydrogen, helium, and two mixtures of hydrogen and helium. A VUV-scanning monochromator was used to record the spectra from an end view while a second spectrometer was used to determine the plasma temperature using hydrogen continuum radiation at 562 nm. Except for pure helium, the plasma temperature was found to be too low to produce significant helium radiation, and the measured spectra were primarily the hydrogen spectra with the highest intensity in the pure hydrogen case. A radiation computer code was used to compute the spectra for comparison to the measurements and to extend the study to simulation of outer planet entry radiation. Conductive cooling prevented ablation of phenolic carbon material samples mounted inside the arc heater during a cursory attempt to produce radiation absorption by ablation gases.

Wells, W. L.↗

Influence of nonequilibrium radiation and shape change on aerothermal environment of a Jovian entry body

The influence of nonequilibrium radiative energy transfer and the effect of probe configuration changes on the flow phenomena around a Jovian entry body are investigated. The radiating shock layer flow is assumed to be axisymmetric, viscous, laminar and in chemical equilibrium. The radiative transfer equations are derived under nonequilibrium conditions which include multilevel energy transitions. The equilibrium radiative transfer analysis is performed with an existing nongray radiation model which accounts for molecular band, atomic line, and continuum transitions. The nonequilibrium results are obtained with and without ablation injection in the shock layer. The nonequilibrium results are found to be greatly influenced by the temperature distribution in the shock layer. In the absence of ablative products, the convective and radiative heating to the entry body are reduced under nonequilibrium conditions. The influence of nonequilibrium is found to be greater at higher entry altitudes. With coupled ablation and carbon phenolic injection, 16 chemical species are used in the ablation layer for radiation absorption. Equilibrium and nonequilibrium results are compared under peak heating conditions.

Tiwari, S. N.↗

Phase-A COBE study

A scaled version of a conical apodizing horm similar to the one used in the Cosmic Background Explorer as the antenna for the far infrared absolute spectrometer (FIRAS) was tested to determine its diffraction patterns. The test transmitter used and results are described. Calculation of the tradeoff between noise and spectral resolution for the FIRAS are examined. Flexural transports, the optical properties of the Martin-Pupplet polarizing interferometer, and radiation absorption of thin bismuth films are also discussed.

Source record↗

Flight testing of the Space Shuttle

An account is given of the flight testing development phase of the Space Shuttle Orbiter. Because of its low lift-to-drag ratio, the Orbiter must make its 280-kt landing approach in the lower atmosphere with a steep descent angle of 19 deg, pulling up at 1800 feet altitude to a 1-1.5 deg descent angle, and finally gliding to a landing at 195 kt. The Orbiter has almost neutral aerodynamic static stability in pitch and yaw, requiring the use of electronic stabilization to augment the vehicle's natural stability. Attention is given to the flight test program, which comprised the first four flights of the Space Shuttle, and which substantially relied on preflight analysis to establish confidence in Shuttle flight performance. Also discussed are the solar radiation absorption and aerodynamic heating characteristics

Brand, V. D.↗

A model function for ocean microwave brightness temperatures

A relatively simple, yet accurate, relationship between the microwave brightness temperature of the ocean and conventional oceanographic and meteorological parameters is derived. The equation for the brightness temperature upwelling from the sea surface through the intervening atmosphere is obtained, considering radiative emission and scattering by the sea surface along with radiative absorption and emission by the atmosphere. A number of approximations are applied to the integral brightness temperature equation and its supporting equations in order to obtain a simple equation for the brightness temperature that does not contain integrals. Values for a number of atmospheric parameters are determined, including temperature sensitivities, oxygen opacity, water vapor and liquid water normalized absorption coefficients, and effective columnar height. The sea surface emissivity model is then considered, modelling the sea surface as a composite of foam-free rough water and foam patches.

Wentz, F. J.↗

Fire control method and analytical model for large liquid hydrocarbon pool fires

The dominate parameter governing the behavior of a liquid hydrocarbon (JP-5) pool fire is wind speed. The most effective method of controlling wind speed in the vicinity of a large circular (10 m dia.) pool fire is a set of concentric screens located outside the perimeter. Because detailed behavior of the pool fire structure within one pool fire diameter is unknown, an analytical model supported by careful experiments is under development. As a first step toward this development, a regional pool fire model was constructed for the no-wind condition consisting of three zones -- liquid fuel, combustion, and plume -- where the predicted variables are mass burning rate and characteristic temperatures of the combustion and plume zones. This zone pool fire model can be modified to incorporate plume bending by wind, radiation absorption by soot particles, and a different ambient air flow entrainment rate. Results from the zone model are given for a pool diameter of 1.3 m and are found to reproduce values in the literature.

Fenton, D. L.↗

The GEISA spectroscopic line parameters data bank in 1984

The 1984 update of the GEISA data bank, containing spectroscopic information on 323,521 lines corresponding to 36 molecules and 79 isotopic species in the spectal range 3 x 10 to the -6th/cm to 17,879/cm, is discussed. The bank compiles parameters describing the radiation absorption or emission properties of gases involved in the atmospheres of the earth and planets. Values of a new exponent which summarized the variation of the collision halfwidth with temperature are given for 10 molecules. Six new molecules, HOCl, N2, CH3Cl, H2O2, H2S, and HCOOH, are included in this edition.

Husson, N.↗

Advanced Solar-propelled Cargo Spacecraft for Mars Missions

Three concepts for an unmanned, solar powered, cargo spacecraft for Mars support missions were investigated. These spacecraft are designed to carry a 50,000 kg payload from a low Earth orbit to a low Mars orbit. Each design uses a distinctly different propulsion system: A Solar Radiation Absorption (SRA) system, a Solar-Pumped Laser (SPL) system and a solar powered magnetoplasmadynamic (MPD) arc system. The SRA directly converts solar energy to thermal energy in the propellant through a novel process. In the SPL system, a pair of solar-pumped, multi-megawatt, CO2 lasers in sunsynchronous Earth orbit converts solar energy to laser energy. The MPD system used indium phosphide solar cells to convert sunlight to electricity, which powers the propulsion system. Various orbital transfer options are examined for these concepts. In the SRA system, the mother ship transfers the payload into a very high Earth orbit and a small auxiliary propulsion system boosts the payload into a Hohmann transfer to Mars. The SPL spacecraft and the SPL powered spacecraft return to Earth for subsequent missions. The MPD propelled spacecraft, however, remains at Mars as an orbiting space station. A patched conic approximation was used to determine a heliocentric interplanetary transfer orbit for the MPD propelled spacecraft. All three solar-powered spacecraft use an aerobrake procedure to place the payload into a low Mars parking orbit. The payload delivery times range from 160 days to 873 days (2.39 years).

Auziasdeturenne, Jacqueline↗

Titan's surface and troposphere, investigated with ground-based, near-infrared observations

Characterizations are presently made of Titan's haze, cloud, surface albedo, and atmospheric H2 abundance on the bases of 4000-5000/cm near-IR spectrum and points from the Fink and Larson (1979) 4000-12,500/cm spectrum. The strength of solar radiation absorption varies significantly with wavelength, facilitating a probing of the various atmospheric levels down to the surface. The present observations suggest the existence of an optically thin CH4 cloud layer, as well as haze and cloud optical depths sufficiently small for surface sensing at 4900, 6250, and 7700/cm. The albedos at these wavenumbers indicate the dominant surface material to be 'dirty' water ice.

Griffith, Caitlin A.↗

NASA Space Engineering Research Center for utilization of local planetary resources

Because of a change in the NASA funding cycle, the present reporting period covers only the six months from March to September 1991. Nevertheless, remarkable progress was made in a number of areas, some of the most noteworthy of which are: (1) Engineering operation of a breadboard CO2 yields O2 demonstration plant that produced over 10 grams of oxygen per day during several runs of over 100 hours each with a single electrolytic cell. Complete automation of controls, monitoring of various inputs/outputs and critical internal variables, diagnostics, and emergency shutdown in an orderly manner were also included. Moreover, 4-cell and 16-cell units, capable of much higher rates of production, were assembled and tested. (2) Demonstration of a 200 percent increase in the carbothermal reduction of ilmenite through vapor deposition of carbon layers on particles of that material. (3) Demonstration of the deposition of strong iron films from carbonyl chemical vapor deposition, establishing the crucial role of additive gases in governing the process. (4) Discovery of an apparent 800 percent increase in the conversion rates of a modified ilmenite simulant in a plasma-augmented reactor, including direct enhancement by solar radiation absorption. (5) Proof that test specimens of lunar soil with small amounts of metallic additives, recrystallized at moderate temperatures, exhibit an improvement of several orders of magnitude in ductility/tensile strength. (6) Experiments establishing the feasibility of producing silicon-based polymers from indigenous lunar materials. (7) Application of CCD technology to the production of maps of TiO2 abundance, defining primary ilmenite deposits, on the disk of the full moon. (8) Attainment of a discovery rate of approximately 3 new near-Earth asteroids per month by Spacewatch, more than doubling the previous global rate. (9) Coordination of industry and university magma electrolysis investigations in a workshop designed to define remaining problem areas and propose critical experiments.

Ramohalli, Kumar↗

Flame balls - Past, present and future

This paper discusses analytical and numerical work that has been carried out in order to understand flame-balls and related phenomena that have been observed in microgravity experiments. The importance of heat losses is identified, whether from conduction, convection, or radiation. Accurate numerical simulations for hydrogen-air mixtures with radiation losses reveal a flammability limit of 3.5 percent of hydrogen by volume, a value close to the experimental one. The important role of stability analyses is emphasized, with particular attention to the role of three-dimensional instabilities in explaining unsteady spheroidal flames and flame-strings, objects that are observed in the experiments. We speculate that the dynamics of flame-strings is affected by in-depth radiation absorption for mixtures containing SF6, and report on some preliminary calculations in which this phenomenon is accounted for.

Buckmaster, J.↗

Synergistic use of optical and microwave data in agrometeorological applications

Remotely sensed optical and microwave data can be synergistically used to infer land surface properties. Optical data can be used to estimate surface albedo, radiation absorption by vegetation canopies and their photosynthetic efficiencies. Vegetation canopy reflectance at red and near-infrared wavelengths can be used to correct for vegetation effect on microwave emissivities at low frequencies for estimating soil moisture. Optical data can also provide information about surface and air temperatures, precipitable water vapor, cloud top temperature and its water content. This information can be utilized to correct microwave data for atmospheric effects. These points are illustrated with theoretical analyses and by application to satellite data. The basic physical mechanisms operative at the various wavelengths are also discussed.

Myneni, R. B.↗

Development of Prototype Micro-Lidar using Narrow Linewidth Semiconductor Lasers for Mars Boundary Layer Wind and Dust Opacity Profiles

We have developed a compact Doppler lidar concept which utilizes recent developments in semiconductor diode laser technology in order to be considered suitable for wind and dust opacity profiling in the Mars lower atmosphere from a surface location. The current understanding of the Mars global climate and meteorology is very limited, with only sparse, near-surface data available from the Viking and Mars Pathfinder landers, supplemented by long-range remote sensing of the Martian atmosphere. The in situ measurements from a lander-based Doppler lidar would provide a unique dataset particularly for the boundary layer. The coupling of the radiative properties of the lower atmosphere with the dynamics involves the radiative absorption and scattering effects of the wind-driven dust. Variability in solar irradiance, on diurnal and seasonal time scales, drives vertical mixing and PBL (planetary boundary layer) thickness. The lidar data will also contribute to an understanding of the impact of wind-driven dust on lander and rover operations and lifetime through an improvement in our understanding of Mars climatology. In this paper we discuss the Mars lidar concept, and the development of a laboratory prototype for performance studies, using, local boundary layer and topographic target measurements.

Menzies, Robert T.↗