Search NASA⌕ Search

SEARCH · Search NASA

Results for “Trajectory analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

Ulysses orbit determination at high declinations

The trajectory of the Ulysses spacecraft caused its geocentric declination to exceed 60 deg South for over two months during the Fall of 1994, permitting continuous tracking from a single site. During this time, spacecraft operations constraints allowed only Doppler tracking data to be collected, and imposed a high radial acceleration uncertainty on the orbit determination process. The unusual aspects of this situation have motivated a re-examination of the Hamilton-Melbourne results, which have been used before to estimate the information content of Doppler tracking for trajectories closer to the ecliptic. The addition of an acceleration term to this equation is found to significantly increase the declination uncertainty for symmetric passes. In addition, a simple means is described to transform the symmetric results when the tracking pass is non-symmetric. The analytical results are then compared against numerical studies of this tracking geometry and found to be in good agreement for the angular uncertainties. The results of this analysis are applicable to the Near Earth Asteroid Rendezvous (NEAR) mission and to any other missions with high declination trajectories, as well as to missions using short tracking passes and/or one-way Doppler data.

Mcelrath, Timothy P.↗
NASA NTRS2014

Atmospheric Entry Studies for Uranus

To better understand the technology requirements for a Uranus atmospheric entry probe, an internal NASA study was conducted. The main objectives for this study were: (1) to determine the entry trade space through parametric studies; and (2) to identify entry technologies that could be used to enable a mission that would meet at least the Tier 1 science objectives described in the Decadal Survey. The paper describes two different approaches to the planet: 1) direct ballistic entry 2) aerocapture followed by direct entry of probe. For direct ballistic entry the trajectory analyses were performed for a range of entry flight path angles and ballistic coefficients. The larger size probes was also considered in an attempt to enable Tier 2 science objectives. For aerocapture analysis a single case was studied to demonstrate feasibility and benefits with this option. A summary of all of the above analyses, including factors that constrain allowable entry trajectories, is presented

Atmospheric entry↗
NASA NTRS2013

Small Launch Vehicle Trade Space Definition: Development of a Zero Level Mass Estimation Tool with Trajectory Validation

Recent high level interest in the capability of small launch vehicles has placed significant demand on determining the trade space these vehicles occupy. This has led to the development of a zero level analysis tool that can quickly determine the minimum expected vehicle gross liftoff weight (GLOW) in terms of vehicle stage specific impulse (Isp) and propellant mass fraction (pmf) for any given payload value. Utilizing an extensive background in Earth to orbit trajectory experience a total necessary delta v the vehicle must achieve can be estimated including relevant loss terms. This foresight into expected losses allows for more specific assumptions relating to the initial estimates of thrust to weight values for each stage. This tool was further validated against a trajectory model, in this case the Program to Optimize Simulated Trajectories (POST), to determine if the initial sizing delta v was adequate to meet payload expectations. Presented here is a description of how the tool is setup and the approach the analyst must take when using the tool. Also, expected outputs which are dependent on the type of small launch vehicle being sized will be displayed. The method of validation will be discussed as well as where the sizing tool fits into the vehicle design process.

Waters, Eric D.↗
NASA NTRS2014

James Webb Space Telescope Initial Mid-Course Correction Monte Carlo Implementation using Task Parallelism

The James Webb Space Telescope will be launched into a highly elliptical orbit that does not possess sufficient energy to achieve a proper Sun-Earth/Moon L2 libration point orbit. Three mid-course correction (MCC) maneuvers are planned to rectify the energy deficit: MCC-1a, MCC-1b, and MCC-2. To validate the propellant budget and trajectory design methods, a set of Monte Carlo analyses that incorporate MCC maneuver modeling and execution are employed. The first analysis focuses on the effects of launch vehicle injection errors on the magnitude of MCC-1a. The second on the spread of potential V based on the performance of the propulsion system as applied to all three MCC maneuvers. The final highlights the slight, but notable, contribution of the attitude thrusters during each MCC maneuver. Given the possible variations in these three scenarios, the trajectory design methods are determined to be robust to errors in the modeling of the flight system.

James Webb Space Telescope↗
NASA NTRS2014

James Webb Space Telescope Initial Mid-Course Correction Monte Carlo Implementation using Task Parallelism

The James Webb Space Telescope will be launched into a highly elliptical orbit that does not possess sufficient energy to achieve a proper Sun-Earth L2 libration point orbit. Three mid-course correction (MCC) maneuvers are planned to rectify the energy deficit: MCC-1a, MCC-1b, and MCC-2. To validate the propellant budget and trajectory design methods, a set of Monte Carlo analyses that incorporate MCC maneuver modeling and execution are employed. The first analysis focuses on the effects of launch vehicle injection errors on the magnitude of MCC-1a. The second on the spread of potential V based on the performance of the propulsion system as applied to all three MCC maneuvers. The final highlights the slight, but notable, contribution of the attitude thrusters during each MCC maneuver. Given the possible variations in these three scenarios, the trajectory design methods are determined to be robust to errors in the modeling of the flight system.

Libration Point Orbit↗
DOE OSTI2019

Analysis of the origins of black carbon and carbon monoxide transported to Beijing, Tianjin, and Hebei in China

A novel back-trajectory approach was adopted to determine the origins of black carbon (BC) and carbon monoxide (CO) transported to Beijing, Tianjin and Hebei. Results showed that the transport efficiency was controlled mainly by mid-latitude westerlies in winter, the South Asian monsoon in summer and prevailing westerly and northwesterly winds in spring and autumn. Hebei was identified as the most important source region of both BC (respectively accounting for 55% and 49%) and CO (39% and 38%) transported to Beijing and Tianjin. Inner Mongolia contributed more to the effective emission intensity (EEI) in winter than in summer for both BC and CO transported to Beijing and Tianjin. Shandong was responsible for higher EEI in summer than in winter. The six provinces making the greatest contributions to BC transported to Hebei were Shandong (19%), Shanxi (19%), Inner Mongolia (17%), Beijing (11%), Henan (11%), and Tianjin (10%), whereas thosemaking the greatest contributions to CO transported to Hebei were Shandong (20%), Inner Mongolia (10%), Tianjin (9%), Henan (9%), Shanxi (9%), and Beijing (8%). In summary, Hebei, Inner Mongolia, Shandong, Tianjin and Shanxi were determined as the dominant source regions of not only BC but also CO transported to Beijing. Hebei, Shandong, Beijing, Inner Mongolia, Henan, Liaoning and Shanxi were relatively important source regions for Tianjin. Shandong, Shanxi, Inner Mongolia, Beijing, Henan, Tianjin, Liaoning, Jiangsu and Anhui were the main source regions for Hebei. Residential and industrial sectors were the dominant sectors for BC and CO transported to the receptors, respectively. These results are consistent with the results of previous studies. Finally, comparing the observed.BC/.CO ratiowith the enhancement ratio of the EEI of BCwith that of CO (Delta EEIBC/Delta EEICO) atMiyun site, we further confirmed that the EEI can be used to represent the amounts of BC and CO reaching receptors. (c) 2018 Published by Elsevier B.V.

black carbon↗
NASA NTRS1976

State-plane trajectories used to observe and control the behavior of a voltage step-up dc-to-dc converter

State-plane analysis techniques are employed to study the voltage step up energy storage dc-to-dc converter. Within this framework, an example converter operating under the influence of a constant on time and a constant frequency controller is examined. Qualitative insight gained through this approach is used to develop a conceptual free running control law for the voltage step up converter which can achieve steady state operation in one on/off cycle of control. Digital computer simulation data is presented to illustrate and verify the theoretical discussions presented.

Burns, W. W., III↗
NASA NTRS1988

PSA: A program to streamline orbit determination for launch support operations

An interactive, menu driven computer program was written to streamline the orbit determination process during the critical launch support phase of a mission. Residing on a virtual memory minicomputer, this program retains the quantities in-core needed to obtain a least squares estimate of the spacecraft trajectory with interactive displays to assist in rapid radio metric data evaluation. Menu-driven displays allow real time filter and data strategy development. Graphical and tabular displays can be sent to a laser printer for analysis without exiting the program. Products generated by this program feed back to the main orbit determination program in order to further refine the estimate of the trajectory. The final estimate provides a spacecraft ephemeris which is transmitted to the mission control center and used for antenna pointing and frequency predict generation by the Deep Space Network. The development and implementation process of this program differs from that used for most other navigation software by allowing the users to check important operating features during development and have changes made as needed.

Legerton, V. N.↗
NASA NTRS2015

NASA's Meteoroid Environments Office's Response to Three Significant Bolide Events Over North America

Being the only U.S. Government entity charged with monitoring the meteor environment, the Meteoroid Environment Office has deployed a network of all sky and wide field meteor cameras, along with the appropriate software tools to quickly analyze data from these systems. However, the coverage of this network is still quite limited, forcing the incorporation of data from other cameras posted to the internet in analyzing many of the fireballs reported by the public and media. A procedure has been developed that determines the analysis process for a given fireball event based on the types and amount of data available. The differences between these analysis process will be explained and outlined by looking at three bolide events, all of which were large enough to produce meteorites. The first example is an ideal event - a bright meteor that occurred over NASA's All Sky Camera Network on August 2, 2014. With clear video of the event from various angles, a high-accuracy trajectory, beginning and end heights, orbit and approximate brightness/size of the event are able to be found very quickly using custom software. The bolide had the potential to have dropped meteorites, so dark flight analysis and modeling was performed, allowing potential fall locations to be mapped as a function of meteorite mass. The second case study was a bright bolide that occurred November 3, 2014 over West Virginia. This was just north of the NASA southeastern all-sky network, and just south of the Ohio-Pennsylvania network. This case study showcases the MEO's ability to use social media and various internet sources to locate videos of the event from obscure sources (including the Washington Monument) for anything that will permit a determination of a basic trajectory and fireball light curve The third case study will highlight the ability to use doppler weather radar in helping locate meteorites, which enable a definitive classification of the impactor. The input data and analysis steps differ for each case study, but the goals remain the same - a trajectory, orbit, and mass estimate for the bolide within hours of the event, and, for events with a high probability of producing meteorites, a location of the strewn field within a day.

Blaauw, Rhiannon C.↗
NASA NTRS2012

Trajectory Control of Rendezvous with Maneuver Target Spacecraft

In this paper, a nonlinear trajectory control algorithm of rendezvous with maneuvering target spacecraft is presented. The disturbance forces on the chaser and target spacecraft and the thrust forces on the chaser spacecraft are considered in the analysis. The control algorithm developed in this paper uses the relative distance and relative velocity between the target and chaser spacecraft as the inputs. A general formula of reference relative trajectory of the chaser spacecraft to the target spacecraft is developed and applied to four different proximity maneuvers, which are in-track circling, cross-track circling, in-track spiral rendezvous and cross-track spiral rendezvous. The closed-loop differential equations of the proximity relative motion with the control algorithm are derived. It is proven in the paper that the tracking errors between the commanded relative trajectory and the actual relative trajectory are bounded within a constant region determined by the control gains. The prediction of the tracking errors is obtained. Design examples are provided to show the implementation of the control algorithm. The simulation results show that the actual relative trajectory tracks the commanded relative trajectory tightly. The predicted tracking errors match those calculated in the simulation results. The control algorithm developed in this paper can also be applied to interception of maneuver target spacecraft and relative trajectory control of spacecraft formation flying.

Zhou, Zhinqiang↗
DOE OSTI2016

FRiED: A NOVEL THREE-DIMENSIONAL MODEL OF CORONAL MASS EJECTIONS

We present a novel three-dimensional (3D) model of coronal mass ejections (CMEs) that unifies all key evolutionary aspects of CMEs and encapsulates their 3D magnetic field configuration. This fully analytic model is capable of reproducing the global geometrical shape of a CME with all major deformations taken into account, i.e., deflection, rotation, expansion, “pancaking,” front flattening, and rotational skew. Encapsulation of 3D magnetic structure allows the model to reproduce in-situ measurements of magnetic field for trajectories of spacecraft-CME encounters of any degree of complexity. As such, the model can be used single-handedly for the consistent analysis of both remote and in-situ observations of CMEs at any heliocentric distance. We demonstrate the latter by successfully applying the model for the analysis of two CMEs.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS2019

Mars-GRAM Support for the Mars Ascent Vehicle

Mars sample return is a bold concept, which entails gathering a varied, scientifically-relevant collection of Martian rock core samples and bringing them to Earth for analysis. To support this endeavor, the Marshall Space Flight Center (MSFC) is developing the Mars Ascent Vehicle (MAV), which is responsible for getting the collected samples off the planet. The MAV Preliminary Architecture Assessment (PAA) study is designing two vehicle architectures based on different propulsion configurations: a two-stage solid-solid concept, and a hybrid concept. Given different thrust profiles for the two configurations, each concept uses a unique trajectory to reach the same orbit. In support of the PAA, The MSFC Natural Environments Branch (EV44) was asked to produce tables of atmospheric parameters along each of the two trajectories. The Mars Global Reference Atmospheric Model (Mars-GRAM) is an EV44 tool that is ideally suited for this analysis. Mars-GRAM will continue supporting MAV development in future design cycles.

Burns, K. L.↗
NASA NTRSDate not supplied

Uncovering Hazards Using a Multi-Objective Optimization to Explore the Faulty State-Space

Considering resilience when designing complex engineered systems is crucial to ensure the system is safe under unexpected hazardous scenarios. Traditional risk-based approaches, such as Failure Modes and Effects Analysis (FMEA) are useful for designing the system to mitigate hazardous scenarios that can be identified by the designer, but often require experience or prior knowledge of system failures to generate. More recently, researchers have developed simulation tools that enable the designer to model large sets of hazardous scenarios (driven by both internal faults and external factors) through simulation. While these tools enable a wider scope of fault modes to be evaluated (e.g., by injecting combined set of fault modes or injecting modes at different times), the resulting assessments (like FMEA) still require knowledge of the specific modes to be evaluated. However, failure to analyze a wide variety of fault scenarios can lead to an incomplete picture of the system resilience, especially to "surprise events'' which may be difficult for the designer to identify and predict beforehand. To overcome this challenge, previous work developed a fault sampling approach for resilience simulations which would procedurally-generate a wide variety of potential faults by systematically perturbing the health states of the system. While the resulting fault modes generated covered a much larger space hazards than would be otherwise considered (and identified many unique failure trajectories which would not have otherwise been identified), it also significantly increased the computational cost of the analysis and resulted in the simulation and analysis of a large set of essentially duplicate scenarios. Additionally, as the number of dimensions in the faulty state-space increases, the full elaboration of possible modes becomes computationally infeasible, justifying the use of a more targeted search. To resolve this limitation, this work proposes the use of a multiobjective optimization algorithm to search the health state space for potential fault modes that are both (1) hazardous and (2) unique. To solve this type of problem, this work proposes the use of a cooperative co-evolutionary algorithm. To demonstrate this approach, it will be applied to a model of an autonomous rover which uses line markings to navigate, focusing on potential hazards in the drive system which could cause the rover to crash. To determine the merit of the approach, it will further be compared with the previously-presented range elaboration approach and a random mode generation approach on the basis of computational efficiency and found modes.

Resilience↗
NASA NTRS2016

Trajectory Design to Mitigate Risk on the Transiting Exoplanet Survey Satellite (TESS) Mission

The Transiting Exoplanet Survey Satellite (TESS) will employ a highly eccentric Earth orbit, in 2:1 lunar resonance, reached with a lunar flyby preceded by 3.5 phasing loops. The TESS mission has limited propellant and several orbit constraints. Based on analysis and simulation, we have designed the phasing loops to reduce delta-V and to mitigate risk due to maneuver execution errors. We have automated the trajectory design process and use distributed processing to generate and to optimize nominal trajectories, check constraint satisfaction, and finally model the effects of maneuver errors to identify trajectories that best meet the mission requirements.

design↗
NASA NTRSDate not supplied

The CLVTOPS Toolchain for NASA Space Launch System Liftoff Analysis and Post Flight Validation

This paper showcases the unique technical capabilities of the CLVTOPS multi-body flight dynamics toolchain developed by Marshall Space Flight Center (MSFC) for analyzing NASA’s Space Launch System (SLS) liftoff events. The CLVTOPS toolchain integrates high-fidelity simulations, geometric algorithms, advanced data analytics, and post-flight telemetry to demonstrate positive clearance between separating bodies and inform design decisions that enhance mission reliability. Proper liftoff separation is crucial to the success of the launch vehicle’s mission; vehicle impacts with the launch tower and supporting components incur a heightened risk of mission failure. For liftoff analysis, the CLVTOPS toolchain enables the integration of vehicle, launch pad, and environmental input models for the investigation of key clearance effectors. Furthermore, recent enhancements to the CLVTOPS toolchain allow for validation via photogrammetric trajectory reconstruction and plume pressure impingement estimation on the tower. The following sections will walk through the tool-chain, SLS liftoff ground rules and assumptions, key models, standard analysis, recent enhancements, and post-flight validation of the Artemis I mission liftoff event.

CLVTOPS↗
NASA NTRS1990

Modeling issues in precision orbit determination for Mars orbiter

This paper examines the accuracy of recent Mars gravity models and the importance of perturbations due to the Mars radiation pressure and the Martian moons, Phobos and Deimos, on the trajectories of Mars orbiters. A linear orbit perturbation theory is used to characterize the patterns of gravity field near resonances for the Viking and Mariner 9 spacecraft. These resonances are shown to have considerable power and their potential for contributing to Mars gravity solutions is emphasized. It is shown that some of the same resonance orders which appear in the Viking orbits, dominate the radial orbit error spectrum for Mars Observer. Results of orbit determination simulations at the Goddard Space Flight Center show that the perturbations caused by the Martian moons and the Mars radiation pressure are larger than 0.1 mm/s, the expected precision of the Mars Observer Doppler tracking data. Tests with the Viking Doppler data indicate that best analysis of these data mandates the inclusion of the Phobos gravitational perturbation in the modeling of Viking spacecraft trajectories.

Lemoine, Frank G.↗
NASA NTRS2019

Probabilistic Risk Analysis and Margin Process for a Flexible Thermal Protection System

Atmospheric entry vehicle thermal protection systems are margined due to the uncertainties that exist in entry aeroheating environments and the thermal response of the materials and structures. Entry vehicle thermal protections systems are traditionally over-margined for the heat loads that are experienced along the entry trajectory by designing to survive stacked worst-case scenarios. Additionally, the conventional heat shield design and margin process offers very little insight into the risk of over-temperature during flight and the corresponding reliability of the heat shield performance. A probabilistic margin process can be used to appropriately margin the thermal protection system based on rigorously calculated risk of failure. This probabilistic margin process allows engineers to make informed aeroshell design, entry-trajectory design, and risk trades while preventing excessive margin from being applied. This study presents the methods of the probabilistic margin process and how the uncertainty analysis is used to determine the reliability of the entry vehicle thermal protection system and associated risks of failure.

Tobin, Steven A.↗
NASA NTRS2018

An Overview of the Layered and Extensible Aircraft Performance System (LEAPS) Development

The Layered and Extensible Aircraft Performance System (LEAPS) is a new sizing and synthesis tool being developed within the Aeronautics Systems Analysis Branch (ASAB) at NASA Langley Research Center. It is a modular, multidisciplinary, multi- fidelity sizing and synthesis tool for modeling advanced aircraft concepts and architectures such as electric/hybrid-electric propulsion, unconventional propulsion airframe integration, and non-traditional mission trajectories. The development of LEAPS is motivated by the lack of existing tools that meet the needs of ASAB. The Flight Optimization System (FLOPS) has been the primary sizing and synthesis tool of ASAB for three decades. However, FLOPS has a number of limitations that make it dicult to use for unconventional aircraft designs. Three high-level goals have been adopted to guide the LEAPS development pro- cess. LEAPS is being developed in Python with an architecture built to enable a exible and extensible analysis capability using the concept of an aircraft object that combines data and analysis models. Five challenge problems for LEAPS have been identi ed to measure progress: analysis of a conventional tube-and-wing aircraft using legacy methods, coupled aeroelastic analysis for weight estimation of a conventional tube-and-wing aircraft, analysis of an advanced hybrid-electric concept, analysis of the X-57 Maxwell distributed electric propulsion aircraft, and optimization of the trajectory of a supersonic vehicle to minimize sonic boom. LEAPS will be a publicly available capability of exceptional quality with modularity and extensibility that makes it a robust tool for design and analysis of current and future unconventional aircraft concepts.

Welstead, Jason R.↗