Search NASA⌕ Search

SEARCH · Search NASA

Results for “Integral Experiments”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

Update on NNL TSL Evaluations and Validation [Slides]

12 new/revised TSL evaluations were contributed to ENDF/B-VIII.1. The thermal diffusion length $L$ is an integral property of a single material’s absorption and scattering cross sections (both differential and integral). No other neutron reactions or materials are involved. The MC21-calculated $L$ for water is consistent with the spread of experimental data and is sufficiently sensitive to different H-H 2 O TSL physics models to use the method as a TSL integral performance benchmark. Modern high-quality diffusion experiments at elevated $T$ would allow direct low-cost physics benchmarking of water TSLs when public elevated-$T$ critical benchmarks are limited. NNL is working with LLNL and RPI to develop experimental PNDA capability. An ICSBEP Fundamental Physics benchmark of the Nassar and Murphy PNDA experiment is being developed to provide an example of how to evaluate these type of benchmarks.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

High Yield Xray Imager Final Design Review

The High Yield Xray Imager (HYXI) is a new NIF target diagnostic system currently under development. The goal of HYXI is to provide high-fidelity, high temporal resolution x-ray imaging capability on high yield NIF implosions at 10MJ and above. The HYXI instrument design concept is based on the combination of two technologies that have been successfully utilized at the NIF on previous instruments, electron pulse-dilation and hybrid-CMOS sensor imaging. The combination of these two techniques will give HYXI sufficient data quality to ascertain differences in hot spot formation dynamics between high and low yield implosions. This information will highlight the critical hot spot conditions needed for ignition and burn. The HYXI design leverages the successful operation of the PDIXI x-ray imager at the NIF on multi MJ yield shots. A new radiation tolerant CMOS imaging array (HYPERION) is being developed to eliminate the significant background noise which limits the data quality of PDIXI. We successfully placed the contract with Advanced hCMOS Systems (AHS) to develop the HYPERION sensor, which fulfils our criteria to place long lead time item procurements by end of FY24. The HYXI Final Design Review was completed at the end of Q4 FY24 (Sep 24 th and Sep 30 th ). The HYXI project is a multi-year effort with a phased approach to be bring up system functionality over time in parallel with the development and fabrication effort of the HYPERION CMOS imaging array. In Phase 1, time-integrated x-ray images on NIF DT experiments will be collected starting in Q3 FY25. In Phase 2 of the project, time-resolved imaging with HYXI utilizing a spare microchannel plate detector back-end will begin in Q3 FY26. Phase 3 concludes the project with the installation of the HYPERION sensor array and the final performance qualification of the HYXI instrument which is scheduled for Q3 FY27 as discussed in the PDR and MRT report on this project in FY23.

42 ENGINEERING↗

APOLLO: a facility-scale differentiable virtual accelerator for Fermilab

As the design complexity of modern accelerators grows, there is more interest in using advanced simulations that have fast execution time or yield additional insights like gradients. The FAST/IOTA facility has been working on implementing and experimentally validating an end-to-end digital twin that is both fast and gradient-aware, allowing for rapid prototyping of new software and experiments with minimal beam time costs. Our framework integrates physics and ML codes for linac and ring simulation through a set of generic interfaces between surrogate and physics-based sections. To reproduce device inputs and outputs, system state is exposed as a deterministic discrete event simulator. Because Fermilab is undergoing control system transition, both EPICS and ACNET frontends are supported. Recently, we have begun transitioning to a new community lattice standard, PALS, as well as developing standardized infrastructure for data ingest and normalization to prepare for model calibration during FAST proton injector commissioning. We discuss implementation details as well as challenges, and future plans to extend modelling to main complex proton accelerators like PIPII and Booster.

Kuklev, Nikita [Fermilab]↗

ZPRD Database: ZPPR-15 Monte Carlo Results

The ZPPR-15 experiments [1] were mockups of a 330 MWe Integral Fast Reactor (IFR). The ZPPR-15 assembly consisted of a clean, two zone, approximately circular core surrounded by a thin depleted uranium (DU) blanket with sodium (Na) cooling and a thick stainless steel reflector. The ZPPR-15 program was conducted in four phases: A, B, C, and D. Each phase was marked by a particular composition of the reference assembly, with the last three being representative of the three stages of the IFR fuel cycle. This report documents all MCNP [2] runs of the ZPPR-15 loadings that were included in the ZPRD database on GitLab. In the present work, eigenvalues and associated standard deviations were computed for each ZPPR-15 loading with the use of the three data libraries (ENDF/B-VII.0 [3], ENDF/B-VII.1 [4] and ENDF/B-VIII.0 [5]). Relevant results from the obtained outputs are also discussed in this report with two main objectives: a) provide and evaluate updated calculated values with respect to previous reports, notably Refs. [6] and [7] that were based on the use of the ENDF/B-VII.0 library. b) address any change in the observed reactivity effects relevant to the analysis of the experimental data when a different data library is used (previously reported results were mostly based on the use of ENDF/B-VII.0 data only).

Aliberti, Gerardo↗

Combined CDF and D0 upper limits on MSSM Higgs boson production in tau-tau final states with up to 2.2 fb-1

Combined results are presented on the search for a neutral Higgs boson in the di-tau final state using 1.8 fb{sup -1} and 2.2 fb{sup -1} of integrated luminosity collected at the CDF and D0 experiments respectively. Data were collected in p{bar p} collisions at a centre of mass energy of 1.96 TeV during RunII of the Tevatron. Limits are set on the cross section x branching ratio ranging from 13.6 pb to 0.653 pb for Higgs masses from 90 GeV to 200 GeV respectively. The results are then interpreted as limits in four different benchmark scenarios within the framework of the MSSM.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

THz transceiver characterization : LDRD project 139363 final report.

LDRD Project 139363 supported experiments to quantify the performance characteristics of monolithically integrated Schottky diode + quantum cascade laser (QCL) heterodyne mixers at terahertz (THz) frequencies. These integrated mixers are the first all-semiconductor THz devices to successfully incorporate a rectifying diode directly into the optical waveguide of a QCL, obviating the conventional optical coupling between a THz local oscillator and rectifier in a heterodyne mixer system. This integrated mixer was shown to function as a true heterodyne receiver of an externally received THz signal, a breakthrough which may lead to more widespread acceptance of this new THz technology paradigm. In addition, questions about QCL mode shifting in response to temperature, bias, and external feedback, and to what extent internal frequency locking can improve stability have been answered under this project.

42 ENGINEERING↗

Data distribution service-based interoperability framework for smart grid testbed infrastructure

This study presents the design and implementation of a communication and control infrastructure for smart grid operation. The proposed infrastructure enhances the reliability of the measurements and control network. The advantages of utilizing the data-centric over message-centric communication approach are discussed in the context of smart grid applications. The data distribution service (DDS) is used to implement a data-centric common data bus for the smart grid. This common data bus improves the communication reliability, enabling distributed control and smart load management. These enhancements are achieved by avoiding a single point of failure while enabling peer-to-peer communication and an automatic discovery feature for dynamic participating nodes. The infrastructure and ideas presented in this paper were implemented and tested on the smart grid testbed. A toolbox and application programing interface for the testbed infrastructure are developed in order to facilitate interoperability and remote access to the testbed. This interface allows control, monitoring, and performing of experiments remotely. Furthermore, it could be used to integrate multidisciplinary testbeds to study complex cyber-physical systems (CPS).

97 MATHEMATICS AND COMPUTING↗

A Two-Fold Structural Classification Method for Determining the Accurate Ensemble of Protein Structures

Atomic-level structural characterization of flexible proteins, such as intrinsically disordered proteins and multi-domain proteins connected by flexible linkers, is challenging as they possess distinct conformations in physiological conditions. Significant efforts have been made to develop integrated approaches by combining small angle neutron/X-ray scattering experiments with molecular simulations to reveal the distinct atomic structures and the corresponding populations for these flexible proteins. One widely used method, the basis-set supported ensemble method, classifies the simulation-generated protein conformations into a set of structural basis and then derives the corresponding populations by fitting to the experimental data. This method makes an implicit assumption that protein conformations of similar structures have similar small angle scattering profiles.The present work demonstrates that, for various protein systems ranging from compact globular proteins and flexible multidomain proteins through to intrinsically disordered proteins, this method provides inaccurate assessment of the structural ensemble of the protein molecules due to the breakdown of the assumption made. To alleviate this problem, a two-fold-clustering method is developed to cluster the simulation-generated protein structures using information on both 3D structure and scattering profiles. As benchmarked by both simulation and experimental results, this new method yields much more accurate populations of structural basis of protein molecules.

59 BASIC BIOLOGICAL SCIENCES↗

Battery inverter experimental data

The increase in power electronic based generation sources require accurate modeling of inverters. Accurate modeling requires experimental data over wider operation range. We used 30 kW off-the-shelf grid following battery inverter in the experiments. We used controllable AC supply and controllable DC supply to emulate AC and DC side characteristics. The experiments were performed at NREL's Energy Systems Integration Facility. Inverter is tested under 100%, 75%, 50%, 25% load conditions. In the first dataset, for each operating condition, controllable AC source voltage is varied from 0.9 to 1.1 per unit (p.u) with a step value of 0.025 p.u while keeping the frequency at 60 Hz. In the second dataset, under similar load conditions (100%, 75%, 50%, 25% ), the frequency of the controllable AC source voltage was varied from 59 Hz to 61 Hz with a step value of 0.2 Hz. Voltage and frequency range is chosen based on inverter protection. Voltages and currents on DC and AC side are included in the dataset.

24 POWER TRANSMISSION AND DISTRIBUTION↗

PV inverter experimental data

The increase in power electronic based generation sources require accurate modeling of inverters. Accurate modeling requires experimental data over wider operation range. We used 20 kW off-the-shelf grid following PV inverter in the experiments. We used controllable AC supply and controllable DC supply to emulate AC and DC side characteristics. The experiments were performed at NREL's Energy Systems Integration Facility. Due to the limitations of the DC supply used, inverter is tested under 75%, 50%, 25% load conditions (This dataset does not contain 100% load condition). In the first dataset, for each operating condition, controllable AC source voltage is varied from 0.88 to 1.09 per unit (p.u) with a step value of 0.025 p.u while keeping the frequency at 60 Hz. In the second dataset, under similar load conditions (75%, 50%, 25% ), the frequency of the controllable AC source voltage was varied from 59.4 Hz to 60.45 Hz with a step value of 0.2 Hz. Voltage and frequency range is chosen based on inverter protection. Voltages and currents on DC and AC side are included in the dataset.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Split phase inverter data

The increase in power electronic based generation sources require accurate modeling of inverters. Accurate modeling requires experimental data over wider operation range. We used 8.35 kW off-the-shelf grid following split phase PV inverter in the experiments. We used controllable AC supply and controllable DC supply to emulate AC and DC side characteristics. The experiments were performed at NREL's Energy Systems Integration Facility. Inverter is tested under 100%, 75%, 50%, 25% load conditions. In the first dataset, for each operating condition, controllable AC source voltage is varied from 0.9 to 1.1 per unit (p.u) with a step value of 0.025 p.u while keeping the frequency at 60 Hz. In the second dataset, under similar load conditions (100%, 75%, 50%, 25% ), the frequency of the controllable AC source voltage was varied from 59 Hz to 61 Hz with a step value of 0.2 Hz. Voltage and frequency range is chosen based on inverter protection. Voltages and currents on DC and AC side are included in the dataset.

24 POWER TRANSMISSION AND DISTRIBUTION↗

PV Inverter Experimental Dataset Version 2 with 100 Percent Power

The increase in power electronic based generation sources require accurate modeling of inverters. Accurate modeling requires experimental data over wider operation range. We used 20 kW off-the-shelf grid following PV inverter in the experiments. We used controllable AC supply and controllable DC supply to emulate AC and DC side characteristics. The experiments were performed at NREL's Energy Systems Integration Facility. The PV inverter is tested under 100%, 75%, 50%, 25% load conditions. In the first dataset, for each operating condition, controllable AC source voltage is varied from 0.88 to 1.09 per unit (p.u) with a step value of 0.025 p.u while keeping the frequency at 60 Hz. In the second dataset, under similar load conditions (100%, 75%, 50%, 25% ), the frequency of the controllable AC source voltage was varied from 59.4 Hz to 60.45 Hz with a step value of 0.2 Hz. Voltage and frequency range is chosen based on inverter protection. Voltages and currents on DC and AC side are included in the dataset.

14 SOLAR ENERGY↗

NETL to establish Dynamic Simulation Research and Training Center to promote IGCC technology with CO2 cpture

To meet increasing demand for education and experience with commercial-scale, coal-fired, integrated gasification combined cycle (IGCC) plants with CO2 capture, the Department of Energy’s (DOE) National Energy Technology Laboratory (NETL) is leading a project to deploy a generic, full-scope, real-time IGCC dynamic plant simulator for use in establishing a world-class research and training center, and to promote and demonstrate IGCC technology to power industry personnel. The simulator, being built by Invensys Process Systems (IPS), will be installed at two separate sites, at NETL and West Virginia University (WVU), and will combine a process/gasification simulator with a power/combined-cycle simulator together in a single dynamic simulation framework for use in engineering research studies and training applications. The simulator, scheduled to be launched in mid-year 2010, will have the following capabilities: High-fidelity, dynamic model of process-side (gasification and gas cleaning with CO2 capture) and power-block-side (combined cycle) for a generic IGCC plant fueled by coal and/or petroleum coke. Highly flexible configuration that allows concurrent training on separate gasification and combined cycle simulators, or up to two IGCC simulators. Ability to enhance and modify the plant model to facilitate studies of changes in plant configuration, equipment, and control strategies to support future R&D efforts. Training capabilities including startup, shutdown, load following and shedding, response to fuel and ambient condition variations, control strategy analysis (turbine vs. gasifier lead, etc.), representative malfunctions/trips, alarms, scenarios, trending, snapshots, data historian, etc. To support this effort, process descriptions and control strategies were developed for key sections of the plant as part of the detailed functional specification, which is serving as the basis of the simulator development. In this paper, we highlight the contents of the detailed functional specification for the simulator. We also describe the engineering, design, and expert testing process that the simulator will undergo in order to ensure that maximum fidelity is built into the generic simulator. Future applications and training programs associated with gasification, combined cycle, and IGCC simulations are discussed, including plant operation and control demonstrations, as well as education and training services.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Education in Safeguards and Security Technology Meeting Challenges with Technology and Experience

Education and hands-on experience are crucial to ensuring a workforce of safeguards and security professionals who can meet the challenges currently faced in global nuclear safeguards and security. Global demand for nuclear energy and technology, the new Strategic Arms Reduction Treaty (START), and the cleanup of Cold War facilities have resulted in an increased need for trained safeguards and security personnel. At the same time, the global community is facing a growing shortage of experienced workers with hands-on knowledge of nuclear material processing. Limited access to operating facilities has dramatically reduced the opportunities for next-generation practitioners to obtain hands-on training experience. To address these needs, the Safeguards Technology Integration Center (STIC) at Oak Ridge National Laboratory was created as a Department of Energy User Facility to provide access both to the latest technology and to field-experienced professionals. The STIC provides real-world conditions, process equipment mock-ups, and controlled access to encapsulated radioactive materials (including highly enriched uranium and plutonium) for training and technology evaluation encompassing various techniques and skills, such as Radiation Inspection Systems, Containment and Surveillance Systems, Nondestructive Assay, Security System Performance Testing, and System Design and Analysis. The STIC facilities, laboratories, test beds, and training facilities are described along with the more notable aspects of the training program, which has included more than 1000 participants in the last four years.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Combined search for the Standard Model Higgs boson using up to 4.9 fb(-1) of pp collision data at root s=7 TeV with the ATLAS detector at the LHC

A combined search for the Standard Model Higgs boson with the ATLAS experiment at the LHC using datasets corresponding to integrated luminosities from 1.04 fb{sup -1} to 4.9 fb{sup -1} of pp collisions collected at {radical}s = 7 TeV is presented. The Higgs boson mass ranges 112.9-115.5 GeV, 131-238 GeV and 251-466 GeV are excluded at the 95% confidence level (CL), while the range 124-519 GeV is expected to be excluded in the absence of a signal. An excess of events is observed around m{sub H} {approx} 126 GeV with a local significance of 3.5 standard deviations ({sigma}). The local significances of H {yields} {gamma}{gamma}, H {yields} ZZ{sup (*)} {yields} {ell}{sup +}{ell}{sup -}{ell}{prime}{sup +}{ell}{prime}{sup -} and H {yields} WW{sup (*)} {yields} {ell}{sup +}{nu}{ell}{prime}{sup -}{bar {nu}}, the three most sensitive channels in this mass range, are 2.8{sigma}, 2.1{sigma} and 1.4{sigma}, respectively. The global probability for the background to produce such a fluctuation anywhere in the explored Higgs boson mass range 110-600 GeV is estimated to be {approx}1.4% or, equivalently, 2.2{sigma}.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Beam echoes in the presence of coupling

Transverse beam echoes could provide a new technique of measuring diusion characteristics orders of magnitude faster than the current methods; however, their interaction with many accelerator parameters is poorly understood. Using a program written in C, we explored the relationship between coupling and echo strength. We found that echoes could be generated in both dimensions, even with a dipole kick in only one dimension. We found that the echo eects are not destroyed even when there is strong coupling, falling o only at extremely high coupling values. We found that at intermediate values of skew quadrupole strength, the decoherence time of the beam is greatly increased, causing a destruction of the echo eects. We found that this is caused by a narrowing of the tune width of the particles. Results from this study will help to provide recommendations to IOTA (Integrable Optics Test Accelerator) for their upcoming echo experiment.

43 PARTICLE ACCELERATORS↗

Non-Nuclear MicroReactor Test Bed and Article

The goal of the project is to provide proof of concept using sodium heats pipes as an efficient way to transfer heat from to rods to an integrated Brayton Cycle. A single simulated heat pipe experiment was performed and the results of the experiment are discussed. The results are also compared to the ABAQUS model that was made for the simulated experiment. The second portion of the poster discusses the design and challenges related to the test bed and the instrumentation required for the project. This brushes over the general requirements and the application for the data.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Resolution Limits of Near IR and IR Thermography Applied to Imaging Thermal Heterogeneities in Nuclear Fuel Surrogate Materials

ABSTRACT The main goal of the project is: To develop an IR thermographic method to monitor fuel pellet cracking inside the hostile environment of the nuclear core. This method will use a high temperature and radiation resistant fiber optic bundle to monitor the fuel pellet inside the core and transmit the information outside to an IR camera. This method will give a visual cue (using IR video) as to when the crack started to form and how it progresses. To achieve this goal, we identified the following as major milestones of the project: 1. Perform 1D modeling of temperature and blackbody radiation intensity across a crack. 2. Image a crack on a fuel cell surrogate using an IR camera with free-space optics and high power laser setup. 3. Simulate cracking in the surrogate sample through inductive heating method, and demonstrate imaging crack formation using the free-space optics setup. 4. Determine parameters for a suitable fiber optic bundle compatible with the IR camera based on the results from the free-space optics experiments. 5. Demonstrate imaging using fiber bundle and integrate viewing system with nuclear core at INL. This report focuses on Goals 1-3. We have successfully achieved Goals 1-3 and are making steady progress towards achieving Goals 4-9. Goals 2 and 4 are very similar and require 2 basic parts: the imaging system and the method to crack the fuel surrogate to replicate the fuel pellet cracking in the nuclear reactor core. The following sections describe the 1D modeling of temperature and blackbody radiation intensity across a crack (Goal 1), procedure to create crack on fuel surrogates and results (Goals 2 and 3), and the IR imaging system and results (Goal 2).

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗