Search NASA⌕ Search

SEARCH · Search NASA

Results for “Isotope Geochemistry”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

U–Pb Geochronology and Stable Isotope Geochemistry of Terrestrial Carbonates, Lower Cretaceous Cedar Mountain Formation, Utah: Implications for Synchronicity of Terrestrial and Marine Carbon Isotope Excursions

The terrestrial Lower Cretaceous Cedar Mountain Formation, Utah, is a critical archive of paleoclimate, tectonics, and vertebrate ecology and evolution. Early Cretaceous carbon cycle perturbations associated with ocean anoxia have been interpreted from this succession, as expressed in stable carbon isotopes. However, refining the timing of the observed stable isotope excursions remains a key challenge in understanding how marine anoxia affects the Earth system, and is ultimately recorded in the terrestrial realm. The geochronology and geochemistry of a terrestrial carbonate near the base of this succession, which potentially records the Ap7 global carbon isotope excursion, is studied here. Petrographic and geochemical analyses are used to test plausible mechanisms for U incorporation into the calcite lattice in this sample. Using these methods, the hypothesis that the incorporation of U was at or close to the timing of carbonate precipitation is evaluated. U–Pb geochronology of calcite indicates a plausible Early Cretaceous age. However, comparison of the new U–Pb ages of calcite with detrital zircon maximum depositional ages immediately beneath the studied sample indicates a disparity in the apparent sedimentation rates if both types of geochronologic information are interpreted as reflecting the timing of sediment deposition. The totality of data supports an early, and high-temperature, diagenetic timing of U incorporation, with potential for minor leaching of U in subsequent fluid–rock interaction. The most likely mechanism for U transport and immobilization in these samples is hydrothermal fluid–rock interaction. Therefore, the radiometric ages, and corresponding stable isotope composition of U-bearing carbonate domains in this sample, indicate early subsurface fluid–rock interactions and not a record of atmosphere–soil geochemical reactions.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Bulk and position-specific isotope geochemistry of natural gases from the Late Cretaceous Eagle Ford Shale, south Texas

Here, a dataset of bulk and position-specific isotope compositions of shale gases from the Late Cretaceous Eagle Ford Shale, south Texas is reported. The chemical and bulk isotopic compositions of the seven samples in this study and those available from the literature show that across the play, produced natural gas from the Eagle Ford Shale preserves a wide range of gas compositions (wetness, ~5 to >90%) and δ 13 C values of C 1 –C 3 . The depth profiles of the isotopic compositions suggest that the western region of the Eagle Ford Shale deposit had experienced as much as 700–800 m of uplift-erosion or gas migration. The timing of and lost-gas fractions by gas expulsion events very likely affected their gas compositions and bulk isotope compositions. Some deep (>3000–3500 m), matured (%Ro > 1.5) gases with heavy δ 13 C(C 1 –C 3 ) values indicate significant loss (>50%) of the early-stage gases. For the position-specific isotope deviations of propane, the ΔC 2-1 values of the five samples show small decrease with well depths, while the ΔH 2-1 values have a general increasing trend. Although some samples fall very close to the equilibrium model trajectories with reasonable calculated temperatures (138–148 °C), the position-specific isotope compositions of propane from the Eagle Ford Shale gases are likely results of thermal cracking of various organic molecules within the source rocks, which have different activation energy for cracking and non-statistical distributions of C/H isotope within them.

58 GEOSCIENCES↗
DOE OSTI2024

SIMS Data Correction Procedure for Quasi‐Simultaneous Arrival ( QSA ) Under‐counting and Ramifications of Misapplication

Isotope geochemistry requires isotope ratios measured using secondary ion mass spectrometry (SIMS) to be made with optimal precision and accuracy. Under some analytical conditions when using electron multiplier detectors, secondary ions may be under‐counted because of quasi‐simultaneous arrival (QSA) at the first dynode. The relative magnitude of the associated QSA correction to raw measured isotopic ratios can be up to seventy permil or more. Therefore, not applying the correction, or misapplication of it could lead to significant inaccuracies in published isotope ratio data. Examples and ramifications of the latter are described in addition to a straightforward procedure for QSA under‐counting correction.

Geochemistry & Geophysics↗
DOE OSTI2021

Practical considerations for amino acid isotope analysis

Over the last few decades, isotopic analysis of amino acids at the compound- and position-specific levels has been rapidly advancing across diverse fields. As these techniques progress, evaluation of isotopic fractionation associated with sample workup is essential. This critical review of analytical methods through the lens of isotope geochemistry provides a benchmark for researchers across disciplines seeking to make compound- and position-specific amino acid isotope measurements. We focus on preparation, acid hydrolysis, clean-up, derivatization, separation, and C, H, N, and S isotope measurement. Despite substantial customizability across these steps, the following general recommendations should maximize recovery while minimizing isotopic fractionation. Samples should be freeze-dried and stored anoxically at ≤ –20 °C prior to conventional acid hydrolysis (6N HCl, 110 °C, 20–24 h, anoxic), which suffices for many residues. Both gas and liquid chromatographic (GC and LC, respectively) techniques are well-established and separate about 15 amino acids; LC bypasses the need for derivatization, while GC provides higher sensitivity. Furthermore, when derivatization is needed, n-acetyl and alkoxycarbonyl esters provide the most reproducible C isotope ratios. For compound-specific analyses, online GC–IRMS and LC–IRMS systems offer the easiest workflow, but EA–IRMS enables potential multi-element isotope analysis. Emerging techniques like high-resolution mass spectrometry are also promising for multi-element analysis and recover position-specific isotopic information. Looking forward to the next decade of innovation, isotope geochemists and ecologists can improve amino acid isotope analysis by focusing on streamlining multi-element analysis and standardizing calibration practices across laboratories.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Intra-Molecular Isotope Study of Light Hydrocarbons

Light hydrocarbons (C 1 -C 10 ) are the largest fraction of petroleum hydrocarbons and some of the most ubiquitous and mobile fluids within sedimentary basins. It has been increasingly recognized that hydrocarbons of varying chain-lengths can be stable even under mantle conditions and that their fluxes may play a key role in the carbon dynamics of the Earth. Major formation mechanisms of these light hydrocarbons include microbial, thermogenic, and abiogenic origins. Despite their proven utility, conventional approaches using the bulk or global stable isotopes of light hydrocarbons are often not sufficient to distinguish their sources (particularly, biogenic vs. abiogenic), maturation stages/temperatures, and migration-degradation processes. Most natural compounds, including light hydrocarbons, are composed of a set of diverse isotopic molecules that differ in the number of isotopic substitutions and/or positions of isotopic substitution within a given molecules. Many of light hydrocarbon molecules contain hydrogen and carbon in energetically non-equivalent positions: isotopomers or position-specific (intra-molecular) isotope fractionation. Position-specific isotopic compositions can differ due either to equilibrium or to path-dependent kinetic or biological processes. Thus, the position-specific isotopic fractionation between different carbon and hydrogen positions within a single molecular compound could be used regardless of their reactants and other products. We hypothesize that the formation, transport and degradation processes of light hydrocarbons in the subsurface induce and control significant, perhaps unique position-specific 13 C/ 12 C and 2 H/ 1 H isotope fractionation. In this proposal, we propose to develop a new dimension in stable isotope geochemistry of light hydrocarbons: intra-molecular isotope study of light hydrocarbons. The specific objectives of our proposal include: (a) develop robust and routine quantitative nuclear magnetic resonance (NMR) methods for high-precision/high-accuracy isotopomer analysis of propane and other light hydrocarbons (C 3 -C 10 ), (b) gain a first clear picture on position-specific δ 2 H and δ 13 C values of select light hydrocarbons of both natural and industrial sources, including samples of natural gases (C 3 and possibly C 4 -C 5 ) collected from select sedimentary basins with conventional and unconventional reservoirs, (c) acquire information on position-specific 13 C/ 12 C and 2 H/ 1 H isotope fractionation of light hydrocarbons in key natural processes (thermogenic formation and oxidative degradation) based on well-controlled laboratory experiments, and (d) establish a general framework for interpreting/modeling position-specific 13 C/ 12 C and 2 H/ 1 H isotope compositions of light hydrocarbons. Intra-molecular isotope study of light hydrocarbons is expected to open up great potentials that the bulk and position-specific isotope fractionation of light hydrocarbons, in combination with mathematical/theoretical kinetic models, could provide unprecedented wealth of information on the sources, transport, and sinks of light hydrocarbons in sedimentary basins and deep Earth.

03 NATURAL GAS↗
DOE OSTI2021

Carbonate clumped isotope analysis (Δ 47 ) of 21 carbonate standards determined via gas‐source isotope‐ratio mass spectrometry on four instrumental configurations using carbonate‐based standardization and multiyear data sets

Rationale Clumped isotope geochemistry examines the pairing or clumping of heavy isotopes in molecules and provides information about the thermodynamic and kinetic controls on their formation. The first clumped isotope measurements of carbonate minerals were first published 15 years ago, and since then, interlaboratory offsets have been observed, and laboratory and community practices for measurement, data analysis, and instrumentation have evolved. Here we briefly review historical and recent developments for measurements, share Tripati Lab practices for four different instrument configurations, test a recently published proposal for carbonate‐based standardization on multiple instruments using multi‐year data sets, and report values for 21 different carbonate standards that allow for recalculations of previously published data sets. Methods We examine data from 4628 standard measurements on Thermo MAT 253 and Nu Perspective IS mass spectrometers, using a common acid bath (90°C) and small‐sample (70°C) individual reaction vessels. Each configuration was investigated by treating some standards as anchors (working standards) and the remainder as unknowns (consistency standards). Results We show that different acid digestion systems and mass spectrometer models yield indistinguishable results when instrument drift is well characterized. For linearity correction, mixed gas‐and‐carbonate standardization or carbonate‐only standardization yields similar results. No difference is observed in the use of three or eight working standards for the construction of transfer functions. Conclusions We show that all configurations yield similar results if instrument drift is robustly characterized and validate a recent proposal for carbonate‐based standardization using large multiyear data sets. Δ 47 values are reported for 21 carbonate standards on both the absolute reference frame (ARF; also refered to as the Carbon Dioxide Equilibrated Scale or CDES) and the new InterCarb‐Carbon Dioxide Equilibrium Scale (I‐CDES) reference frame, facilitating intercomparison of data from a diversity of labs and instrument configurations and restandardization of a broad range of sample sets between 2006, when the first carbonate measurements were published, and the present.

58 GEOSCIENCES↗
DOE OSTI2025

Geochemistry and Strontium Isotopes for Coal Creek Watershed, Colorado, 2021-2022

The geochemistry and strontium isotope data for Coal Creek Watershed, Colorado, consists of cation, anion, and 87Sr/87Sr isotope values from samples collected at 8 stream location along Coal Creek, samples from two groundwater springs within the watershed, and a shallow subsurface piezometer. All stream and spring samples were collected between June and October, 2021, and the shallow, near stream piezometer sample was collected in July of 2022. These data were collected to evaluate how groundwater contributions to Coal Creek originating from shallow vs deep flow paths respond seasonal drying. Understanding of groundwater-surface water interactions in montane systems in critical for the future of water availability in the Western US as groundwater contributions are expected to become more important for sustaining summer stream flows. This data package contains: (1) a csv of all cation samples; (2) a csv of all anion samples; (3) a csv of all 87Sr/87Sr isotope samples; and (4) a csv of locations for each sampling site. The dataset additionally includes a file-level metadata (flmd.csv) file that lists each file contained in the dataset with associated metadata; and a data dictionary (dd.csv) file that contains column/row headers used throughout the files along with a definition, units, and data type.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Equilibrium carbon isotope fractionation factors of hydrocarbons: Semi-empirical force-field method

Here, we have calculated the reduced partition function ratios for carbon isotopes (β-factor) of 67 hydrocarbons (alkanes, alkenes, alkynes, cycloalkanes, and aromatics), including their 267 single-substituted isotopomers. The calculations were performed using the harmonic oscillator – rigid rotator model and the Urey / Bigeleisen-Mayer approach. Normal frequencies of molecular vibrations of the isotopologues were calculated from the molecular structures data and valence field force constants stored in the Light-handled Elucidation of Vibrations (LEV) database elaborated by Dr. Gribov and his colleagues in Russia. The LEV database is constructed from experimental spectroscopic and structural data by solving inverse problems of molecular vibrations. The LEV is internally consistent and the most comprehensive database available to date. The β-factor were calculated in the temperature range of 200–800 K with a 10 K step. Our calculations predict that the β-factors increase with an increasing number of C atoms within the same groups of hydrocarbons (e.g., alkanes). Our calculations also show a general descending order of 13 C enrichments among the different groups of hydrocarbons: cycloalkanes, aromatics, alkenes (double bonds) and isoalkanes, alkanes, alkynes (triple bonds). Position-specific, intramolecular isotope effects within hydrocarbons are determined by the β-factors of C in the different functional groups in the order: quaternary (C), tertiary (methine, CH), secondary (methylene, CH 2 ), primary (methyl, CH 3 ) and double bond (C=C), saturated bond (C - C), triple bond (HC≡). Our calculations on bulk and position-specific carbon isotope β-factors of the hydrocarbons, which are generally consistent with very limited ab initio calculations in the literature, are internally consistent and the most comprehensive to date for future applications to position-specific isotope geochemistry of hydrocarbons.

58 GEOSCIENCES↗
DOE OSTI2023

An empirical calibration of the serpentine-water oxygen isotope fractionation at T = 25–100°C

The ability to precisely constrain the physical–chemical conditions of serpentinization, such as temperature and fluid source, is limited by the accuracy of calibrations for oxygen isotope fractionation between serpentine and water – i.e., 1000 lnα( serpentine-water ) – which disagree by up to 20‰ when extrapolated to T<200°C. In this study, we present a new empirical calibration of 1000 lnα( serpentine-water ) aiming to improve applications of oxygen isotope geochemistry to very low-T serpentinization (T<100°C). We used the high-spatial resolution capabilities of Secondary Ion Mass Spectrometry (SIMS) to analyze oxygen isotope ratios in mineral pairs of calcite + serpentine, quartz + serpentine and talc + serpentine co-crystallized at scales≤50μm in six serpentinite samples from the Samail ophiolite (Oman). SIMS analysis shows that the mineral pairs are relatively homogenous in oxygen isotope ratios with variability in δ 18 O values ≤2‰ (2s). Clumped isotope thermometry and petrological constraints indicate crystallization temperatures from 25 to 100°C for the investigated samples. These independent constraints on temperature allowed us to derive 1000 lnα( serpentine-water ) by combining Δ 18 O( quartz-serpentine ), Δ 18 O( talc-serpentine ) and Δ 18 O( calcite-serpentine ) measured by SIMS in the investigated samples with Δ 18 O( quartz-water ), Δ 18 O( talc-water ) and Δ 18 O( calcite-water ) calibrations available in the literature. Our empirical calibration of 1000 lnα( serpentine-water ) = 1.04±0.20 (2SE) × 10 6 /T 2 (T in K), from T = 25 to 100°C, is within uncertainty of former high-temperature empirical calibrations extrapolated to T<100°C and matches experimental calibrations when extrapolated to T=250°C. In conclusion, the new serpentine-water calibration enables more accurate reconstructions of fluid-rock interactions occurring during low-temperature serpentinization processes in various tectonic settings.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Apatite geochemistry as a tool for understanding the petrogenesis of layered mafic-ultramafic rocks in the Bushveld Complex, South Africa

The sources of the magmas that formed the Rustenburg Layered Suite of the Bushveld Complex in South Africa remain debated, despite decades of research. Vertical and lateral variation in bulk rock and mineral separate Sr-Nd isotopic compositions, which generally indicate enriched sources, demonstrate that the layered sequence was formed by the emplacement of multiple batches of magma, crucially resulting in episodes of PGE-Cr-V mineralisation. The Lu-Hf isotope compositions of zircon are, however, at odds with the bulk rock Sr-Nd isotopic heterogeneity as they show near homogeneous compositions throughout the layered sequence (εHf (2.06 Ga) =−8). This lack of variation in Hf isotope composition has been attributed to deep, continental lithospheric mantle-related and/or crustal contamination of plume-derived Bushveld magmas. In this study, we analysed the major, trace element and Sr-Nd isotope geochemistry of apatite in the Rustenburg Layered Suite. Apatite occurs as an intercumulus mineral in the lowermost regions and a cumulus mineral in the uppermost regions of the layered sequence and can therefore be used to test existing models for the isotopic disequilibrium between bulk rock Sr-Nd and zircon Hf isotopic compositions. Apatite is largely chlorapatite in the lowermost regions and fluorapatite in the uppermost regions of the layered sequence. The Merensky Reef is unusual in that it comprises both chlorapatite and fluorapatite. Apatite throughout the layered sequence is generally unzoned and shows no evidence of late-stage alteration. Trace element data show that apatite is enriched in L/HREE, with common negative Eu-Sr anomalies. These trace element signatures are consistent with a magmatic origin for the apatite grains, with prior, or concurrent, plagioclase crystallization from the same melt. Variability in in situ Sr and Nd isotope compositions of apatite is recorded throughout the layered sequence with εNd (2.06 Ga) compositions varying between −2.5 and − 10.2 and initial 87 Sr/ 86 Sr compositions varying between 0.7079 and 0.7103 (for the Marikana dikes only). The variability in Sr-Nd isotope compositions of apatite is consistent with the bulk rock (and mineral separate) variation in Sr-Nd isotope compositions, suggesting apatite preserves primary magmatic compositions in the Rustenburg Layered Suite.

Apatite↗
DOE OSTI2023

Equilibrated Gas and Carbonate Standard‐Derived Dual (Δ 47 and Δ 48 ) Clumped Isotope Values

Abstract Carbonate clumped isotope geochemistry has primarily focused on mass spectrometric determination of m/z 47 CO 2 for geothermometry, but theoretical calculations and recent experiments indicate paired analysis of the m/z 47 ( 13 C 18 O 16 O) and m/z 48 ( 12 C 18 O 18 O) isotopologues (referred to as Δ 47 and Δ 48 ) can be used to study non‐equilibrium isotope fractionations and refine temperature estimates. We utilize 5,448 Δ 47 and 3,400 Δ 48 replicate measurements of carbonate samples and standards, and 183 Δ 47 and 195 Δ 48 replicate measurements of gas standards from 2015 to 2021 from a multi‐year and multi‐instrument data set to constrain Δ 47 and Δ 48 values for 27 samples and standards, including Devils Hole cave calcite, and study equilibrium Δ 47 ‐Δ 48 , Δ 47 ‐temperature, and Δ 48 ‐temperature relationships. We compare results to previously published findings and calculate equilibrium regressions based on data from multiple laboratories. We report acid digestion fractionation factors, Δ* 63‐47 and Δ* 64‐48 , and account for their dependence on the initial clumped isotope values of the mineral.

58 GEOSCIENCES↗
DOE OSTI2020

Geochemical Changes in Response to CO 2 Injection in a CO 2 -EOR Complex in Northern Michigan

The overall purpose of the geochemical monitoring program under Midwestern Regional Carbon Sequestration Partnership (MRCSP) is to use stable and radiogenic isotope geochemistry in concert with analysis of general geochemical parameters of fluids and gases and analysis of core samples to determine geochemical processes occurring in the reef structure because of CO 2 injection..

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Nuclear and Chemical Sciences Division: Investment Strategy 2023

The mission of the Nuclear and Chemical Sciences (NACS) Division within the Physical and Life Sciences (PLS) Directorate is to advance scientific understanding, capabilities, and technologies in nuclear and particle physics, radiochemistry, forensic science, and isotope systems to support LLNL’s national security mission. NACS Division personnel conduct a diverse range of research activities in particle physics, nuclear physics, radiation detection, nuclear measurements, chemical and nuclear forensic science, nuclear and radiochemistry, isotope geochemistry, and environmental science. These areas are leveraged to address evolving national security challenges. Scientific research provides the foundation for addressing these challenges, and it is also the principal means of attracting, training, and retaining staff scientists who can deliver solutions across the Laboratory’s mission space. The overarching strategy is to position the NACS Division at the nexus between fundamental nuclear and chemical science research and nuclear security applications. This approach will support efforts to recruit, train, and retain top-flight scientists and engineers who will play a key role in executing the Laboratory’s core nuclear security missions, while also enhancing LLNL’s reputation as a center for innovative scientific research. This document describes the strategic vision that will be used to guide key investments aimed at enabling NACS scientists to lead new efforts and meet future challenges.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2020

Geochemical Changes in Response to CO 2 Injection in a CO 2 -EOR Complex in Northern Michigan (Volume II.1)

The Midwest Regional Carbon Sequestration Partnership (MRCSP) was founded in 2003 as part of the U.S. Department of Energy’s (DOE’s) Regional Carbon Sequestration Partnership initiative. Since its founding, MRCSP has made significant strides toward making CCUS a viable option for states in the region. The public/private consortium, funded through the DOE Regional Carbon Sequestration Initiative, brings together nearly 40 industry partners and 10 states. Battelle, as the project lead, oversees research, development and operations and coordinates activities among the partners. The incremental, phased approach has built a valuable knowledge base for the industry and paved the way for commercial-scale adoption of CCUS technologies. From 2008 to 2020, MRCSP Phase III focused on the development of large-scale injection projects. This report is part of a series of reports prepared under the Midwestern Regional Carbon Sequestration Partnership (MRCSP) Phase III (Development Phase). These reports summarize and detail the findings of the work conducted under the Phase III project. The report describes the geochemical monitoring program under MRCSP to use stable and radiogenic isotope geochemistry in concert with analysis of general geochemical parameters of fluids and gases and analysis of core samples to determine geochemical processes occurring in the reef structure because of CO 2 injection. Specifically, brine and gas samples were collected and analyzed to determine changes occurring between reefs prior to and following CO 2 injection. The analytical results for general geochemical parameters were modeled with chemical equilibrium models to determine if the injection of CO 2 resulted in the mineral dissolution or precipitation. Finally, core samples were collected and analyzed to determine if there was evidence of dissolution features or mineral precipitation.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2022

DOE new players Carbon cycle (2016-2021)

The overarching scientific goals of our multidisciplinary grant was to further expand understanding about the key microorganisms (players), metabolic strategies (processes), and interspecies relationships (interactions) involved in the formation and oxidation of methane in the environment. This research applied novel environmental metagenomics, transcriptomics, and proteomic techniques, state-of-the-art analytical imaging, stable isotope geochemistry, and reaction-transport modeling to address these goals and develop an ‘ecosystems level’ understanding of the factors which regulate microbial methane cycling in anoxic sedimentary ecosystems. For decades, it was believed that the obligate step in methanogenesis catalyzed by methyl coenzyme M reductase (Mcr) was limited to a specific branch of the archaeal Domain, formerly known as the Euryarchaeota. Less than a decade ago co-I Tyson’s team published a surprising metagenomic-based discovery of divergent Mcr genes in a novel uncultured phylum (Bathyarchaeota), catalyzing a major shift in thinking about the diversity of microorganisms that encode the potential for methane (or higher alkane) metabolism in anoxic environments (Evans et al., 2015). In our work here, we further expand on the groups of archaea harboring the genomic potential for methane or hydrocarbon metabolism using environmental metagenomics and new gene targeted bioinformatics techniques. We additionally advanced understanding about the terminal electron acceptors and metabolic potential supporting the anaerobic oxidation of methane (AOM) in terrestrial ecosystems, specifically focused on new lineages of ANME archaea capable of respiring manganese oxides with methane presumably using large extracellular multi-heme cytochrome complexes. New details about specific syntrophic mechanisms underlying the exchange of electrons during sulfate-coupled methane oxidation between ANME-2 archaea and their sulfate-reducing bacterial partners were also elucidated as part of this funded project. Through a series of experimental ‘omics and single cell stable isotope probing studies with incubated environmental sediment samples and a cultured model electrogenic microorganism combined with model-based predictions. Combined, this work provides strong support for the hypothesis of direct interspecies electron transfer (DIET) is the dominant syntrophic mechanism controlling the anaerobic oxidation of methane with sulfate over other proposed mechanisms and additionally illustrates important spatial constraints and the underlying physico-chemical factors influencing AOM syntrophic consortia structure for DIET and extracellular metal respiration. This collaborative multi-institutional project successfully advanced several of our milestone goals including the identification of new microbial players containing methyl coenzyme M reductases hypothesized to be central to methane or hydrocarbon cycling in anoxic environments and enhancing fundamental knowledge about the role extracellular electron transfer plays in the ecophysiology of methanotrophic archaea respiring metal oxides and in the physical and metabolic structuring of syntrophic interactions in methane-rich sedimentary ecosystems.

03 NATURAL GAS↗
DOE OSTI2025

Elephant range and population, strontium isotopes, and genetics combine to give local-scale specificity to ivory hotspot tracking

We use Sr isotopes to increase the precision of DNA-based origin estimates of wildlife products. Population information is used to develop Sr isotope Elephant Polygons that are overlaid onto the region of origin identified by DNA assignment to determine the sources of seized ivory samples. Our approach is cognizant of isotope mixing due to isotope turnover within animals and also of the large home range of elephants or other mobile species. Genetic information from 3 different law enforcement ivory seizures suggests a region of origin confined to Kenya and Tanzania in eastern Africa. We determine characteristic 87 Sr/ 86 Sr ratios for each of 25 different Elephant Polygons within this region using analyses of more the 600 known-origin reference samples. Using both the 87 Sr/ 86 Sr ratios of the seized ivory samples and elephant population estimates from individual Elephant Polygons we find that at least 75 % of the samples likely came from a single Elephant Polygon which includes the Tsavo National Parks in Kenya and the Mkomazi National Park in Tanzania. A few samples may have come from other regions, most likely from Tanzania. This study illustrates the value of combining genetics, isotope geochemistry, and population surveys in wildlife forensics studies.

Africa↗
DOE OSTI2024

Metal Organic Complexation in Seawater: Historical Background and Future Directions

The speciation of most biologically active trace metals in seawater is dominated by complexation by organic ligands. This review traces the history of work in this area, from the early observations that showed surprisingly poor recoveries using metal preconcentration protocols to the present day, where advances in mass spectroscopy and stable isotope geochemistry are providing new insights into the structure, origin, fate, and biogeochemical impact of organic ligands. Many long-standing hypotheses about the specific biological origin of ligands such as siderophores in seawater are finally being validated. This work has revealed the complexity of organic complexation, with multiple ligands and, in some cases, timescales of ligand exchange that are much slower than originally thought. The influence of organic complexation on scavenging is now a key parameter in biogeochemical models of biologically essential metals, especially iron. New insights about the sources and sinks of ligands are required to enhance the usefulness of these models.

Geochemistry & Geophysics↗