Search NASA⌕ Search

SEARCH · Search NASA

Results for “PLASMA PROPULSION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

16 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Segmented wall-less hall thruster

Disclosed is a miniaturized plasma propulsion device with minimized surface area of the thruster walls exposed to the plasma and, as a result, reduced plasma-surface interactions including a set of segmented electrodes to facilitate the following improvements compared to relevant existing technologies: 1) control of the plasma flow including focusing of the plasma plume 2) increase of the thrust 2) reduction of inefficiencies associated with the electron cross field current, and 3) mitigation of low frequency oscillations. The electrodes affect all these actions when a DC or modulated voltage is applied to one or all of them with the same or different amplitudes, with the same or different frequencies or phases which are all optimized to realize the best performance through changes in the acceleration and/or ionization regions. In addition, the applied voltage to the main electrodes may also be modulated.

Simmonds, Jacob↗
DOE OSTI2026

Measurements and scaling of ion propulsion impulse during driven magnetic reconnection

Impulse scaling during magnetic reconnection, the magnetic energy conversion to kinetic energy, via direct Mach probe measurements in Magnetic Reconnection Experiment is examined. Ion exhaust velocity and impulse scalings with reconnecting magnetic field during the push phase of driven reconnection are presented. The outflows and impulse measurements are compared with global MHD simulations. Both measurements and simulations reveal a favorable scaling, greater than linear, of impulse with reconnecting field. These scaling results establish that magnetic reconnection could be utilized for plasma propulsion.

Ebrahimi, Fatima [Princeton Plasma Physics Laborat↗
DOE OSTI2024

Laser-stimulated photodetachment of electrons from the negatively charged dielectric substrates

The photon-stimulated emission of bulk electrons has been extensively studied for various types of materials, while the photodetachment of surplus surface electrons has not been fully explored. The photodetachment barrier energy is commonly defined by the surface electron affinity of material, which is typically less than the work function and more pronounced for non-conducting substrates and in environments with a continuous flux of electrons to the surface, such as in gas discharge plasmas. Herein, it is experimentally shown that the photodetachment yield of surplus electrons created by plasma-induced charging of non-conductive surfaces of dielectric materials depends on the initial surface charge density and do not correlate with the tabulated affinity values of these materials under gas discharge charging conditions. In cocnclusion, this result obtained using laser-stimulated photodetachment for fused silica, boron nitride, and alumina, is critically important for the understanding of charging and discharging dynamics, secondary electron emission, and photo emission effects affecting plasma–wall interactions relevant to surface and capacitively coupled discharges, dusty plasmas, electrostatic probe diagnostics, and applications for plasma processing of materials, plasma propulsion, and gas breakdown.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

LLNL FESP Theory Highlights: November 2024

This talk presented a refined understanding of plasma-facing thermionic emitter cathodes by examining the limitations of the conventional space charge-limited model, which overlooks ion trapping dynamics within the virtual cathode. While conventional theory distinguishes between temperature-limited and space charge-limited regimes based on electron current constraints, recent findings reveal that trapped ions can form a quasi-neutral "second plasma," expanding upstream and interacting with the primary plasma. These effects are amplified in non-planar geometries, such as cylindrical or spherical sheaths, where trapped ions create a positive feedback loop with the upstream plasma. To address these phenomena, a new "Aid-and-Compete" model was developed, offering insights into current enhancement and sheath mode transitions relevant for plasma devices, including emissive cathodes in electric propulsion, fusion applications, thin film deposition systems, and plasma diagnostics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Hot Hydrogen Exposure of U x Zr 1-x C y Nuclear Fuel: The Influence of Composition and Density

Refractory carbide nuclear fuel has been one of the most promising fuel candidates for space nuclear propulsion due to its high melting point, temperature stability, and compatibility in a hot hydrogen environment. In this study, U x Zr 1-x C y fuel was produced by means of a carbothermic reduction process in different UC compositions including 5,10, 20, and 30 at.% UC in the fuel compound. The powder feedstock was consolidated via direct current sintering with densities up to 97% of the theoretical density. The samples with different U x Zr 1-x C y compositions were exposed to hot hydrogen at 2600 K for a cumulative time of 300 min. The samples were characterized by SEM, XRD, density, and measured for mass losses. The high-density samples displayed improved performance in hot hydrogen by minimizing porous sites and reducing areas of direct contact with hydrogen gas, leading to reduced mass losses. Variations in sample density proved to induce large changes in mass loss rates, increasing them up to 90%. The compositions with higher UC content reported the largest mass losses in the study. The loss of uranium occurred primarily at the surfaces exposed to the hot hydrogen where changes in the lattice constant confirmed losses exceeding 50% of the initial UC content in higher compositions, specifically to U 0.3 Zr 0.7 C y . XRD analyses revealed the presence of UH 3 in U 0.3 Zr 0.7 C y suggesting that metallic uranium formed inside the sample as a product of carbon losses. High-density U x Zr x-1 C y fuel with UC concentrations at or below 20 at.% UC exhibited stability and negligible density changes in a high temperature hydrogen environment.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Theoretical Modeling of Reactor Relevant Conditions for Plasma Jet Driven Magneto-Inertial Fusion

The Charger Advanced Power and Propulsion Laboratory (CAPP), a laboratory within the Propulsion Research Center (PRC) at the University of Alabama in Huntsville (UAH) is working with Los Alamos National Laboratory (LANL). to develop models and inform on promising paths for high gain magneto-inertial fusion (MIF) conditions. This report provides a framework for identifying promising conditions for achieving ignition in plasma-jet-driven magneto-inertial fusion (PJMIF)[1]. As proposed, for the first part of the contract, UAH proposes to develop a gain over unity set of stagnation conditions to provide a state of plasma conditions to achieve to set long terms goals for the PJMIF program. Specifically, UAH will model PJMIF stagnation conditions to include radiation, heat transfer, two temperature energy equations, fusion reactivity and nonlocal fusion product deposition, but no hydrodynamics for these purposes. These calculations will use a stationary plasma model to reduce simulation complexity—focusing on a DT target at 10 keV. Subsequent work will include a DD plasma layer acting as an afterburner. UAH will assume an initial magnetic field without any consideration of the topology, just assume a field strength, most likely scaled with consideration of the local hall parameter. This effort will inform the team on the tradeoff between mass, peak target field, etc and the achievable gain.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Establishing criteria for the transition from kinetic to fluid modeling in hollow cathode analysis

Hollow cathodes for plasma switch applications are investigated via 2D3V particle-in-cell simulations of the channel and plume region. The kinetic nature of the plasma within the channel is dependent on the thermalization rate of electrons, emitted from the insert. When Coulomb collisions occur at a much greater rate than ionization or excitation collisions, the electron energy distribution function rapidly relaxes to a Maxwellian and the plasma within the channel can be described accurately via a fluid model. In contrast, if inelastic processes are much faster than Coulomb collisions, then the electron energy distribution function in the channel exhibits a notable high-energy tail, and a kinetic treatment is required. This criterion is applied to hollow cathodes from the literature, revealing that a fluid approach is suitable for most electric propulsion applications, whereas a kinetic treatment can be more critical to accurate modeling of plasma switches.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Achieving high tensile strength and ductility in refractory alloys by tuning electronic structure

The energy efficiency of heat engines (gas and steam turbines) for electricity production and propulsion is determined by the Carnot cycle and scales with operating temperature. Commercial nickel- and cobalt-based superalloys melt near 1,500 °C and rapidly lose mechanical strength beyond 1,000 °C. Refractory metals melt well above 2,000 °C but have inherent manufacturability challenges that are barriers to adoption, such as high ductile-to-brittle transition temperatures. Using density functional theory-guided design, we demonstrate tailored local lattice distortions that promote phase-stable, non-equiatomic refractory concentrated solid solutions with both high ductility and strength. Here, we exemplify this for single-phase, body-centred cubic Nb 4 Ta 4 V 3 Ti that exhibits castability, excellent room-temperature tensile yield strength (∼1 GPa) and ductility (approaching 20% uniform strain), and exceptional high-temperature tensile strength (500 MPa at 1,000 °C). These findings illustrate a path for designing materials that hold great potential for advancing next-generation technologies such as Generation IV fission reactors, first-generation fusion-plasma reactors, and more efficient gas turbines for electricity generation and propulsion.

DFT↗
DOE OSTI2024

Numerical modeling of plasma assisted deflagration to detonation transition in a microscale channel

Here, this work numerically studies the plasma assisted deflagration to detonation transition (DDT) of H 2 /O 2 mixtures in a microscale channel with detailed chemistry and transport. The results show that the DDT onset time is non-monotonically dependent on the discharge pulse number. The DDT is accelerated with small pulse numbers, whereas retarded with large ones. Two different DDT regimes, respectively at a small and large plasma discharge number, via acoustic choking of the burned gas and plasma-enhanced reactivity gradient without acoustic choking, are observed. Without plasma discharge, pronounced pressure and temperature gradients in front of the flame are generated by acoustic compression after the choking of the burned gas, triggering DDT via autoignition. With small plasma pulse numbers, the plasma-generated species enhance the ignition kinetics and lead to an increased reactivity in the boundary layer. After the choking of the burned gas, the plasma-enhanced reactivity advances the sequence of autoignition near the wall, strengthens ignition-shock wave coupling, and accelerates DDT. However, with a large discharge pulse number, a direct autoignition initiating DDT can occur without the acoustic choking of the burned gas due to the strongly accelerated reactivity and elevated temperature. In this case, DDT onset is retarded because the elevated temperature increases sonic velocity and the increased reactivity accelerates fuel oxidation in front of the flame, decelerating the formation of a leading shock and subsequent pressure buildup ahead of the flame. The present modeling reveals that no matter with or without plasma discharge, DDT is initiated by autoignition in thermal, pressure, and reactivity gradient fields via the Zel'dovich gradient mechanism. The acoustic choking of the burned gas may not be the necessary condition of DDT with strong plasma-enhanced reactivity gradient. This work provides an answer to the experimentally observed non-monotonic DDT onset time by plasma, which provides guidance to control DDT in advanced detonation engines and fire safety of hydrogen-fueled catalytic reactors in microchannels by non-equilibrium plasma discharge.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2024

Sunbeam: Near-sun statites as beam platforms for beam-driven rockets

Here, we outline a method of beamed power for propulsion that utilizes relativistic electron beams. The physics of charged particle beam propagation in the space plasma environment is discussed and the long-range (> 100 AU) advantage of relativistic electron beams is emphasized. A preliminary statite-based beam emitter for powering probes to 0.1c is proposed and the challenges in beamed-power uses are explored.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2024

Decarbonization of Off-Road, Rail, Marine, and Aviation (DORMA) Program (2023 Annual Progress Report)

This document summarizes the progress of VTO's Decarbonization of Off-Road, Rail, Marine, and Aviation (DORMA) program during the fiscal year 2023. DORMA's R&D focus was on research, development, and demonstration of new propulsion and vehicle technologies that will reduce greenhouse gas emissions in difficult-to-decarbonize transportation applications.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2026

USACA Spring Technical Meeting 2026

Overview slides of ceramic and material needs for nuclear technology along with a few other advanced manufacturing info slides on harsh material space.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Foliar element determination from field survey in association with the National Ecological Observatory Network Airborne Observation Platform survey, East River, Colorado 2018

The purpose of this dataset is to support research aimed at understanding the coupling between hydrologic and biogeochemical processes at watershed scale, particularly the relationship between aboveground vegetation characteristics and subsurface soil properties. These data are intended to inform and calibrate models of catchment-scale biogeochemical fluxes, including rock-derived nutrient cycling, and they were procured to address the following questions: (1) What is the distribution of vegetation characteristics across the study catchments? (2) Are foliar concentrations of rock-derived nutrients related to underlying lithology and soil availability, or are these signals masked by biotic nutrient cycling and retention processes?This data package contains foliar elemental data collected during the 2018 National Ecological Observatory Networks (NEON) Airborne Observation Platform (AOP) imaging spectroscopy and lidar surveys in Gunnison County, Colorado. Folair samples were collected across the East River, Washington Gulch, Slate River, and Coal Creek watersheds and contain a mixture of vegetation including meadow, shrub, and tree foliar samples. The samples were processed using aqua regia digestion and analyzed for elemental determination on inductively coupled plasma optical emission spectrometry (ICP-OES).The data package includes: (1) raw foliar elemental data files in CSV and PDF formats, (2) quality control certificates in PDF format, and (3) an aggregated CSV file containing all elemental measurements compiled across samples. No specialized software is required to access or use these files.

2018 National Ecological Observatory Network Campa↗
DOE OSTI2025

Enabling Low-Temperature (LTP) Ignition Technologies for Multi-Mode Engines through the Development of a Validated High-Fidelity LTP Model for Predicative Simulations Tools

The goal of multi-mode engine architectures is to extend current lean-burn dilution limits with renewable fuels, which requires spark plugs to deposit high energies (hundreds of mJ) in order to initiate ignition and complete combustion. At elevated energy deposition rates, spark plugs experience increased electrode erosion and thermal losses, which ultimately shortens the spark-plug lifetime and lowers ignition efficiency. As such, in order to safeguard the efficiency gains of multi-mode concepts, new and improved ignition technologies are required. Recently, non-equilibrium low-temperature plasmas (LTP) have been shown to promote energy-efficient ignition via quenching and transport of electronically excited atoms and molecules, selective radical production and fast heating of hydrocarbon/air mixtures [1-2]. Thus, LTP is seen as a technology that can potentially improve the energy extraction efficiency of fuels, while enabling kinetically controlled combustion modes towards fuel leaner conditions to realize current DOE VTO goals of improving the sustainability of future mobility [3]. Although many previous studies have demonstrated the efficacy of plasma-assisted ignition to enhance combustion, the detailed enhancement mechanisms remain largely unknown, especially for oxygenated fuels and at elevated pressures that are most relevant to practical engine conditions. These barriers hinder the development of accurate and comprehensive numerical models that seek to describe LTP-based ignition in existing engine design software tools and methods. Current state-of-the-art simulation capabilities for LTP ignition systems are in need of improvements since they deliver qualitative results only due to important limitations of existing approaches. Firstly, validated kinetic models with elementary steps for plasma discharges in oxygenated fuel/air mixtures of relevance to the transportation sector are required. Such kinetic models do not exist at present and will be developed and validated within this project. Secondly, plasma discharges and reactive mixture ignition are multi-scale, unsteady processes requiring high-performance numerical methods and software that execute efficiently on DOE supercomputers. Such software does not exist at present and will be developed and applied to practical LTP ignition scenarios as part of this project. Thirdly, experimental databases that are tailored to serve as benchmark in support of the development of predictive computational models of LTP ignition do not exist and will be part of this project.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2024

Observational evidence for Criegee intermediate oligomerization reactions relevant to aerosol formation in the troposphere

Criegee intermediates are reactive intermediates that are implicated in transforming the composition of Earth’s troposphere and in the formation of secondary organic aerosol, impacting Earth’s radiation balance, air quality and human health. Yet, direct identification of their signatures in the field remains elusive. Here, from particulate and gas-phase mass-spectrometric measurements in the Amazon rainforest, we identify sequences of masses consistent with the expected signatures of oligomerization of the CH 2 OO Criegee intermediate, a process implicated in ozonolysis-driven aerosol formation. In this study, we assess the potential contributions of oligomerization through laboratory ozonolysis experiments, direct kinetic studies of Criegee intermediate reactions, and high-level theoretical calculations. Global atmospheric models built on these kinetics results indicate that Criegee intermediate chemistry may play a larger role in altering the composition of Earth’s troposphere than is captured in current atmospheric models, especially in areas of high humidity. However, the models still capture only a relatively small fraction of the observed signatures, suggesting considerable underestimates of Criegee intermediate concentrations and reactivity and/or the dominance of other, presently uncharacterized, oxidation mechanisms. Resolving the remaining uncertainties in emission inventories and the effects of atmospheric water vapour on key chemical reactions will be required to definitively assess the role of Criegee intermediate oligomerization reactions.

58 GEOSCIENCES↗
DOE OSTI2025

Durability of PGM catalyst MEAs of polymer electrolyte membrane fuel cells for heavy-duty vehicles

Polymer electrolyte membrane fuel cells (PEMFCs) are promising power sources for heavy-duty vehicles (HDVs) owing to cleanliness and efficiency. However, the degradation of membrane electrode assemblies (MEAs) under HDV conditions remains a huge challenge. Here, this work investigated MEA durability under HDV conditions using a US Department of Energy standard accelerated stress test for 180,000 cycles (equivalent to 1 million miles of HDV operation). Effects of catalyst Pt content on MEA durability were examined using homemade 30% Pt/C (H-Pt/C) and commercial 46% Pt/C (C-Pt/C) catalysts. Both MEAs experienced H 2 /air and H 2 /O 2 performance loss over cycles. Analysis with scanning transmission electron microscopy, X-ray diffraction, inductively coupled plasma mass spectrometry, and mercury intrusion porosimetry revealed severe degradation of Pt nanoparticles (NPs), support structures, and the catalyst layer. Two degradation stages for NPs were proposed: Ostwald ripening dominated the initial 60,000 cycles, followed by combined Ostwald ripening and particle migration. Measurements with ion chromatography, high-frequency resistance, and oxygen-diffusion resistance revealed degradation of membrane and ionomer, respectively.

25 ENERGY STORAGE↗