Search NASA⌕ Search

SEARCH · Search NASA

Results for “ZENER DIODE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

JANTX/N937B Zener diode

Zener diodes manufactured by Motorola and Siemens were tested. Apparent failure mode in all three groups was B (sub) V (Zener-breakdown-voltage) minimum failure. Both manufacturers had apporximately same amount of failure in each testing.

Source record↗

JANTX/N972B zener diode

Tested Zeners were manufactured by Siemens and Motorola. Devices tested in groups 1 and 2 did quite well. Notable damage to both manufacturer lots occurred in group 2 testing.

Source record↗

Zener diode protection network in submount for LEDs connected in series

A transient voltage suppressor circuit is disclosed for a plurality (N) of LEDs connected in series. Only one zener diode is created for connection to each node between LEDs, and a pair of zener diodes (the “end” zener diodes) are connected to the two pins (anode and cathode pads) of the series string. Therefore, only N+1 zener diodes are used. The end zener diodes (Q1 and Qn+1) effectively create back-to-back zener diodes across the two pins since the zener diodes share a common p+ substrate. The n+ regions of the end zener diodes Q1 and Qn+1 have the highest breakdown voltage requirement and must be placed relatively far apart. Adjacent n+ regions of the intermediate zener diodes have a much lower breakdown voltage requirement so may be located close together. The zener diodes may be placed within a very small footprint or can be larger for better suppressor performance.

Wei, Yajun↗

Zener Diode Compact Model Parameter Extraction Using Xyce-Dakota Optimization.

This report presents a detailed process for compact model parameter extraction for DC circuit Zener diodes. Following the traditional approach of Zener diode parameter extraction, circuit model representation is defined and then used to capture the different operational regions of a real diode's electrical behavior. The circuit model contains 9 parameters represented by resistors and characteristic diodes as circuit model elements. The process of initial parameter extraction, the identification of parameter values for the circuit model elements, is presented in a way that isolates the dependencies between certain electrical parameters and highlights both the empirical nature of the extraction and portions of the real diode physical behavior which of the parameters are intended to represent. Optimization of the parameters, a necessary part of a robost parameter extraction process, is demonstrated using a 'Xyce-Dakota' workflow, discussed in more detail in the report. Among other realizations during this systematic approach of electrical model parameter extraction, non-physical solutions are possible and can be difficult to avoid because of the interdependencies between the different parameters. The process steps described are fairly general and can be leveraged for other types of semiconductor device model extractions. Also included in the report are recommendations for experiment setups for generating optimum dataset for model extraction and the Parameter Identification and Ranking Table (PIRT) for Zener diodes.

42 ENGINEERING↗

Zener diode controls switching of large direct currents

High-current zener diode is connected in series with the positive input terminal of a dc supply to block the flow of direct current until a high-frequency control signal is applied across the zener diode. This circuit controls the switching of large dc signals.

Source record↗

Simple cryogenic temperature regulator - The Zener diode

For obtaining optimum performance from cooled infrared detectors used in astronomy, it is often necessary to operate the preamplifier transistor (usually a JFET) at a higher temperature than that provided by the cryogen. Various means of elevating the temperature of the FET above the temperature of its environment are considered. A description is presented of a method which uses a 10 V Zener diode (actually an avalanche diode) as a self-stabilizing heater element. The diode is mounted in good thermal contact with the FET, and both are isolated from the work surface by a link of poor conductivity. The diode is driven by a stable, constant voltage power supply.

Storey, J. W. V.↗

JANTX1N3016B zener diode

Report evaluates effects of power and temperature overstress on Motorola and Siemens devices. Reverse bias leakage maximum limit failure and Zener-breakdown maximum limit failure were common. Other failures are described.

Source record↗

JANTX/N98B Zener diode

Tested diodes were manufactured aby Motorola and Siemens. Both sample lots performed well in groups 1 and 3 testing. Group 2 testing was most detrimental of three groups. Extreme heat was big factor in failure mode.

Source record↗

JANTX1N4570A zener diode

Siemens and Motorola diodes were tested. Of three stress groups, group 2 prove to be most detrimental to both sample lots.

Source record↗

JANTX1N2970B zener diode

Report evaluates effects of power and temperature overstress on General Semi-conductor and Siemens devices. Excessive failure rates limited testing. Failure modes are described.

Source record↗