Search NASA⌕ Search

SEARCH · Search NASA

Results for “instrument placement”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2006

Improved target handoff for single cycle instrument placement

Single Cycle Instrument Placement(SCIP)could dramatically increase the speed of various planetary rover operations. JPL is validating SCIP for use on its upcoming Mars Science Laboratory mission. Two major sources of error in the implementation submitted for validation were imprecision in selecting a distant target and error introduced while handing the target off to the rover's hazard cameras (hazcams). We have added the capability to designate a target using high resolution cameras (pancams) and then hand off to medium resolution cameras (navcams) with little error later in the traverse. We implemented several options for handoff from navcams to hazcams. We evaluated their performance on several test cases. Two methods produced average handoff error of 1 pixel when successful, but these only worked in half of the tests. Two other methods reliably produced about 10 pixels of error. None reliably reach the goal of 1 pixel handoff accuracy.

handoff↗
NASA NTRS2005

Target Tracking, Approach, and Camera Handoff for Automated Instrument Placement

This paper describes the target designation, tracking, approach, and camera handoff technologies required to achieve accurate, single-command autonomous instrument placement for a planetary rover. It focuses on robust tracking integrated with obstacle avoidance during the approach phase, and image-based camera handoff to allow vision-based instrument placement. It also provides initial results from a complete system combining these technologies with rover base placement to maximize arm manipulability and image-based instrument placement.

target tracking↗
NASA NTRS2009

Autonomous Instrument Placement for Mars Exploration Rovers

Autonomous Instrument Placement (AutoPlace) is onboard software that enables a Mars Exploration Rover to act autonomously in using its manipulator to place scientific instruments on or near designated rock and soil targets. Prior to the development of AutoPlace, it was necessary for human operators on Earth to plan every motion of the manipulator arm in a time-consuming process that included downlinking of images from the rover, analysis of images and creation of commands, and uplinking of commands to the rover. AutoPlace incorporates image analysis and planning algorithms into the onboard rover software, eliminating the need for the downlink/uplink command cycle. Many of these algorithms are derived from the existing groundbased image analysis and planning algorithms, with modifications and augmentations for onboard use.

Leger, P. Chris↗
NASA NTRS2005

Approach and Instrument Placement Validation

The Mars Exploration Rovers (MER) from the 2003 flight mission represents the state of the art technology for target approach and instrument placement on Mars. It currently takes 3 sols (Martian days) for the rover to place an instrument on a designated rock target that is about 10 to 20 m away. The objective of this project is to provide an experimentally validated single-sol instrument placement capability to future Mars missions. After completing numerous test runs on the Rocky8 rover under various test conditions, it has been observed that lighting conditions, shadow effects, target features and the initial target distance have an effect on the performance and reliability of the tracking software. Additional software validation testing will be conducted in the months to come.

Ator, Danielle↗
NASA NTRS2005

Multi-Target Single Cycle Instrument Placement

This presentation is about the robotic exploration of Mars using multiple targets command cycle, safe instrument placements, safe operation, and K9 Rover which has a 6 wheel steer rocket-bogey chassis (FIDO, MER), 70% MER size, 1.2 GHz Pentium M laptop running Linux OS, Odometry and compass/inclinometer, CLARAty architecture, 5 DOF manipulator w/CHAMP microscopic camera, SciCams, NavCams and HazCams.

Pedersen, Liam↗
NASA NTRS2005

Single-Command Approach and Instrument Placement by a Robot on a Target

AUTOAPPROACH is a computer program that enables a mobile robot to approach a target autonomously, starting from a distance of as much as 10 m, in response to a single command. AUTOAPPROACH is used in conjunction with (1) software that analyzes images acquired by stereoscopic cameras aboard the robot and (2) navigation and path-planning software that utilizes odometer readings along with the output of the image-analysis software. Intended originally for application to an instrumented, wheeled robot (rover) in scientific exploration of Mars, AUTOAPPROACH could be adapted to terrestrial applications, notably including the robotic removal of land mines and other unexploded ordnance. A human operator generates the approach command by selecting the target in images acquired by the robot cameras. The approach path consists of multiple legs. Feature points are derived from images that contain the target and are thereafter tracked to correct odometric errors and iteratively refine estimates of the position and orientation of the robot relative to the target on successive legs. The approach is terminated when the robot attains the position and orientation required for placing a scientific instrument at the target. The workspace of the robot arm is then autonomously checked for self/terrain collisions prior to the deployment of the scientific instrument onto the target.

Huntsberger, Terrance↗
NASA NTRS2003

Terrain Model Registration for Single Cycle Instrument Placement

This paper presents an efficient and robust method for registration of terrain models created using stereo vision on a planetary rover. Our approach projects two surface models into a virtual depth map, rendering the models as they would be seen from a single range sensor. Correspondence is established based on which points project to the same location in the virtual range sensor. A robust norm of the deviations in observed depth is used as the objective function, and the algorithm searches for the rigid transformation which minimizes the norm. An initial coarse search is done using rover pose information from odometry and orientation sensing. A fine search is done using Levenberg-Marquardt. Our method enables a planetary rover to keep track of designated science targets as it moves, and to hand off targets from one set of stereo cameras to another. These capabilities are essential for the rover to autonomously approach a science target and place an instrument in contact in a single command cycle.

Deans, Matthew↗
NASA NTRS2012

Method and system for providing autonomous control of a platform

The present application provides a system for enabling instrument placement from distances on the order of five meters, for example, and increases accuracy of the instrument placement relative to visually-specified targets. The system provides precision control of a mobile base of a rover and onboard manipulators (e.g., robotic arms) relative to a visually-specified target using one or more sets of cameras. The system automatically compensates for wheel slippage and kinematic inaccuracy ensuring accurate placement (on the order of 2 mm, for example) of the instrument relative to the target. The system provides the ability for autonomous instrument placement by controlling both the base of the rover and the onboard manipulator using a single set of cameras. To extend the distance from which the placement can be completed to nearly five meters, target information may be transferred from navigation cameras (used for long-range) to front hazard cameras (used for positioning the manipulator).

Seelinger, Michael J.↗
NASA NTRS1985

Initial placement of STO instruments

The current plans for the placement of the Solar Terrestrial Observatory (STO) space station will make use of each of the currently planned space station elements - the manned space station, the polar platform, and the coorbiting platform. A designation of the instrument placement on each element along with a summary of the mass, volume, power and data requirements which these instrument will impose is provided in tabular form.

Source record↗
NASA NTRS1986

Initial placement of STO instruments

The current plans for the placement of the Solar Terrestrial Observatory (STO) space station will make use of each of the currently planned space station elements - the manned space station, the polar platform, and the coorbiting platform. A designation of the instrument placement on each element along with a summary of the mass, volume, power and data requirements which these instrument will impose is provided in tabular form.

Source record↗
NASA NTRS1999

Autonomous Vision-Based Manipulation from a Rover Platform

Current rover designs use on-board manipulators to enhance their capabilities for planetary exploration and in-situ science. In this paper, we describe how these manipulators can be used to perform two types of operations: rock sample aquisition for return to earth and instrument placement for in-situ science meausrements.

autonomous manipulation rock acquisition instrumen↗
NASA NTRS1997

A Prototype Manipulation System for Mars Rover Science Operations

This paper provides an overview of a new manipulation system developed for sampling and instrument placement from small autonomous mobile robots for Mars exploration. Selected out of the design space, two manipulators have been constructed and integrated into the Rocky 7 Mars rover prototype. This paper describes objectives and constraints for these manipulators, and presents the finished system and some results from its operation.

Mars Rover manipulation system sampling instrument↗
NASA NTRS2002

Science Target Assessment for Mars Rover Instrument Deployment

This paper introduces the system being developed at NASA Ames Research Center, intended for the Mars '09 Smart Lander, to robustly place sensors or tools against rocks in a single communications cycle. Science targets must be assessed prior to instrument placement in order to segment them from the background and determine where, if possible, to position the instrument. An initial result of this research effort is a novel Bayesian based method for segmenting rocks from the ground using 3D data.

Pedersen, Liam↗
NASA NTRS2005

Inspection with Robotic Microscopic Imaging

Future Mars rover missions will require more advanced onboard autonomy for increased scientific productivity and reduced mission operations cost. One such form of autonomy can be achieved by targeting precise science measurements to be made in a single command uplink cycle. In this paper we present an overview of our solution to the subproblems of navigating a rover into place for microscopic imaging, mapping an instrument target point selected by an operator using far away science camera images to close up hazard camera images, verifying the safety of placing a contact instrument on a sample or finding nearby safe points, and analyzing the data that comes back from the rover. The system developed includes portions used in the Multiple Target Single Cycle Instrument Placement demonstration at NASA Ames in October 2004, and portions of the MI Toolkit delivered to the Athena Microscopic Imager Instrument Team for the MER mission still operating on Mars today. Some of the component technologies are also under consideration for MSL mission infusion.

Pedersen, Liam↗