Search NASA⌕ Search

Engineering topics

Bejczy, Antal K.

Publications and source records attributed to Bejczy, Antal K..

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2000

Towards Development of Robotic Aid for Rehabilitation of Locomotion-Impaired Subjects

Manual assistance of therapists to help movement of legs of spinal cord injured (SCI) subjects during stepping on a treadmill for locomotion rehabilitation has severe economic and technical limitations. Scientists at the Department of Physiological Science at the University of California Los Angeles (UCLA) and roboticists at the Jet Propulsion Laboratory (JPL) initiated a joint effort to develop a robotic mechanism capable of performing controlled motions equivalent to the arm and hand motions of therapists assisting the stepping of locomotion impaired subjects on a treadmill, while the subjects' body weight is partially supported by an overhead harness. A first necessary technical step towards this development is to measure and understand the kinematics and dynamics of the therapists' arm and hand motions as they are reflected on the subjects' leg movement. This paper describes an initial measurement system developed for this purpose together with the related measurement results, and outlines the planned future technical work.

Bejczy, Antal K.↗
NASA NTRS1996

Challenges of Human-Robot Communication in Telerobotics

Some general considerations are presented on bilateral human-telerobot control and information communication issues. Advances are reviewed related to the more conventional human-telerobot communication techniques, and some unconventional but promising communication methods are briefly discussed. Future needs and emerging application domains are briefly indicated.

robot telerobot communication↗
NASA NTRS1995

Computational Virtual Reality (VR) as a human-computer interface in the operation of telerobotic systems

This presentation focuses on the application of computer graphics or 'virtual reality' (VR) techniques as a human-computer interface tool in the operation of telerobotic systems. VR techniques offer very valuable task realization aids for planning, previewing and predicting robotic actions, operator training, and for visual perception of non-visible events like contact forces in robotic tasks. The utility of computer graphics in telerobotic operation can be significantly enhanced by high-fidelity calibration of virtual reality images to actual TV camera images. This calibration will even permit the creation of artificial (synthetic) views of task scenes for which no TV camera views are available.

Bejczy, Antal K.↗
NASA NTRS1994

Stereoscopic, Force-Feedback Trainer For Telerobot Operators

Computer-controlled simulator for training technicians to operate remote robots provides both visual and kinesthetic virtual reality. Used during initial stage of training; saves time and expense, increases operational safety, and prevents damage to robots by inexperienced operators. Computes virtual contact forces and torques of compliant robot in real time, providing operator with feel of forces experienced by manipulator as well as view in any of three modes: single view, two split views, or stereoscopic view. From keyboard, user specifies force-reflection gain and stiffness of manipulator hand for three translational and three rotational axes. System offers two simulated telerobotic tasks: insertion of peg in hole in three dimensions, and removal and insertion of drawer.

Kim, Won S.↗
NASA NTRS1994

Highly parallel reconfigurable computer architecture for robotic computation having plural processor cells each having right and left ensembles of plural processors

In a computer having a large number of single-instruction multiple data (SIMD) processors, each of the SIMD processors has two sets of three individual processor elements controlled by a master control unit and interconnected among a plurality of register file units where data is stored. The register files input and output data in synchronism with a minor cycle clock under control of two slave control units controlling the register file units connected to respective ones of the two sets of processor elements. Depending upon which ones of the register file units are enabled to store or transmit data during a particular minor clock cycle, the processor elements within an SIMD processor are connected in rings or in pipeline arrays, and may exchange data with the internal bus or with neighboring SIMD processors through interface units controlled by respective ones of the two slave control units.

Fijany, Amir↗
NASA NTRS1994

Anthropomorphic Telemanipulation System in Terminus Control Mode

This paper describes a prototype anthropomorphic kinesthetic telepresence system that is being developed at JPL. It utilizes dexterous terminus devices in the form of an exoskeleton force-sensing master glove worn by the operator and a replica four finger anthropomorphic slave hand. The newly developed master glove is integrated with our previously developed non-anthropomorphic six degree of freedom (DOF) universal force-reflecting hand controller (FRHC). The mechanical hand and forearm are mounted to an industrial robot (PUMA 560), replacing its standard forearm. The notion of 'terminus control mode' refers to the fact that only the terminus devices (glove and robot hand) are of anthropomorphic nature, and the master and slave arms are non-anthropomorphic. The system is currently being evaluated, focusing on tool handling and astronaut equivalent task executions. The evaluation revealed the system's potential for tool handling but it also became evident that hand tool manipulations and space operations require a dual arm robot. This paper describes the system's principal components, its control and computing architecture, discusses findings of the tool handling evaluation, and explains why common tool handling and EVA space tasks require dual arm robots.

glove exoskeleton force-sensing master glove EVA s↗
NASA NTRS1994

Toward Integrated Operator Interface for Advanced Teleoperation under Time-Delay

This paper briefly describes an Advanced Teleoperator (ATOP) system and its control station where a variety of computer-based operator interface devices and techniques are integrated into a functional setting, accommodating a primary operator and secondary operators. Computer graphics is a key operator interface component in the control station where new types of manual interface devices also are employed. The results of some generic and applications task experiments are summarized, including the performance of a simulated remote satellite servicing task, carried out under four to eight seconds communications time delay, using satellite TV and Internet computer communication links. In conclusion, the paper highlights the lessons learned so far,.

remote control communications delay automation↗
NASA NTRS1994

Advanced teleoperation: Technology innovations and applications

The capability to remotely, robotically perform space assembly, inspection, servicing, and science functions would rapidly expand our presence in space, and the cost efficiency of being there. There is considerable interest in developing 'telerobotic' technologies, which also have comparably important terrestrial applications to health care, underwater salvage, nuclear waste remediation and other. Such tasks, both space and terrestrial, require both a robot and operator interface that is highly flexible and adaptive, i.e., capable of efficiently working in changing and often casually structured environments. One systems approach to this requirement is to augment traditional teleoperation with computer assists -- advanced teleoperation. We have spent a number of years pursuing this approach, and highlight some key technology developments and their potential commercial impact. This paper is an illustrative summary rather than self-contained presentation; for completeness, we include representative technical references to our work which will allow the reader to follow up items of particular interest.

Schenker, Paul S.↗
NASA NTRS1993

Parallel Computation Of Forward Dynamics Of Manipulators

Report presents parallel algorithms and special parallel architecture for computation of forward dynamics of robotics manipulators. Products of effort to find best method of parallel computation to achieve required computational efficiency. Significant speedup of computation anticipated as well as cost reduction.

Fijany, Amir↗
NASA NTRS1993

Demonstration of a High-Fidelity Predictive/Preview Display Technique for Telerobotic Servicing in Space

A highly effective predictive/preview display technique for telerobotic servicing in space under several seconds communication time delay has been demonstrated on a large laboratory scale in May 1993, involving the Jet Propulsion Laboratory as the simulated ground control station and, 2500 miles away, the Goddard Space Flight Center as the simulated satellite servicing set-up. The technique is based on a high-fidelity calibration procedure that enables a high-fidelity overlay of 3-D graphics robot arm and object models over given 2-D TV camera images of robot arm and objects. To generate robot arm motions, the operator can confidently interact in real time with the graphics models of the robot arm and objects overlaid on an actual camera view of the remote work site. The technique also enables the operator to generate high-fidelity synthetic TV camera views showing motion events that are hidden in a given TV camera view or for which no TV camera views are available. The positioning accuracy achieved by this technique for a zoomed-in camera setting was about +/-5 mm, well within the allowable +/-12 mm error margin at the insertion of a 45 cm long tool in the servicing task.

Kim, Won S.↗
NASA NTRS1993

An Advanced Operator Interface Design with Preview/Predictive Displays for Ground-Controlled Space Telerobotic Servicing

Recent advances in real-time 3-D graphics and graphical user interface (GUI) technologies enable development of advanced operator interfaces for telerobotic systems. In particular, we have employed preview/predictive displays with calibrated graphics overlay and X/Motif-based GUI's for efficient and reliable ground-controlled space telerobotic servicing under communication time delay.

Telerobotic↗
NASA NTRS1993

Special purpose parallel computer architecture for real-time control and simulation in robotic applications

This is a real-time robotic controller and simulator which is a MIMD-SIMD parallel architecture for interfacing with an external host computer and providing a high degree of parallelism in computations for robotic control and simulation. It includes a host processor for receiving instructions from the external host computer and for transmitting answers to the external host computer. There are a plurality of SIMD microprocessors, each SIMD processor being a SIMD parallel processor capable of exploiting fine grain parallelism and further being able to operate asynchronously to form a MIMD architecture. Each SIMD processor comprises a SIMD architecture capable of performing two matrix-vector operations in parallel while fully exploiting parallelism in each operation. There is a system bus connecting the host processor to the plurality of SIMD microprocessors and a common clock providing a continuous sequence of clock pulses. There is also a ring structure interconnecting the plurality of SIMD microprocessors and connected to the clock for providing the clock pulses to the SIMD microprocessors and for providing a path for the flow of data and instructions between the SIMD microprocessors. The host processor includes logic for controlling the RRCS by interpreting instructions sent by the external host computer, decomposing the instructions into a series of computations to be performed by the SIMD microprocessors, using the system bus to distribute associated data among the SIMD microprocessors, and initiating activity of the SIMD microprocessors to perform the computations on the data by procedure call.

Fijany, Amir↗
NASA NTRS1993

Laboratory For Telerobotic Repair

Laboratory telerobotic system performs such complicated tasks as picking up tools, removing thermal blanket, and replacing screws. Human operator in control room operates remote robot with aid of video monitors, torque and force displays, and force feedback. System used to perform research and to develop telerobotic-repair capabilities equal to those of human operator.

Fiorini, Paolo↗
NASA NTRS1993

Generating Smooth Motions For Robotic Manipulators

In improved method for generating trajectory of robotic manipulator, each straight-line segment of trajectory composed of constant-velocity main portion sandwiched between smooth acceleration at start and smooth deceleration at finish. Algorithm implementing method computes velocity in each accelerating portion as sinusoidal function of position along line. This motion chosen for two reasons: closely approximates motion of human hand along straight-line trajectory, and provides very smooth transitions between constant-velocity portion and accelerated and decelerational end portions.

Bejczy, Antal K.↗
NASA NTRS1993

Graphics simulation and training aids for advanced teleoperation

Graphics displays can be of significant aid in accomplishing a teleoperation task throughout all three phases of off-line task analysis and planning, operator training, and online operation. In the first phase, graphics displays provide substantial aid to investigate work cell layout, motion planning with collision detection and with possible redundancy resolution, and planning for camera views. In the second phase, graphics displays can serve as very useful tools for introductory training of operators before training them on actual hardware. In the third phase, graphics displays can be used for previewing planned motions and monitoring actual motions in any desired viewing angle, or, when communication time delay prevails, for providing predictive graphics overlay on the actual camera view of the remote site to show the non-time-delayed consequences of commanded motions in real time. This paper addresses potential space applications of graphics displays in all three operational phases of advanced teleoperation. Possible applications are illustrated with techniques developed and demonstrated in the Advanced Teleoperation Laboratory at JPL. The examples described include task analysis and planning of a simulated Solar Maximum Satellite Repair task, a novel force-reflecting teleoperation simulator for operator training, and preview and predictive displays for on-line operations.

Kim, Won S.↗
NASA NTRS1992

Quantitative Evaluation Of Teleoperator Performance

Report describes experiments on remote manual control of robotic manipulator. Experiments conducted to evaluate quantitatively relative effectiveness of several control modes: various combinations of position control, rate control, remote compliance, and feedback from force and torque sensors. Tasks evaluated: removing thermal blanket, unbolting electrical panel, and handling bundles of electrical wires and electrical connectors on simulated solar Max satellite by means of remotely controlled robot in teleoperation laboratory.

Das, Hari↗